From 307edbaf4b9c053d244939b308a7d9f67942fe62 Mon Sep 17 00:00:00 2001 From: octo Date: Mon, 12 Dec 2005 09:01:21 +0000 Subject: [PATCH] Deleted `src/stamp-h1.in', `src/config.h.in' and `INSTALL' in trunk --- INSTALL | 181 ------------------------------------ src/config.h.in | 277 -------------------------------------------------------- 2 files changed, 458 deletions(-) delete mode 100644 INSTALL delete mode 100644 src/config.h.in diff --git a/INSTALL b/INSTALL deleted file mode 100644 index da55609a..00000000 --- a/INSTALL +++ /dev/null @@ -1,181 +0,0 @@ -Basic Installation -================== - - These are generic installation instructions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, a file -`config.cache' that saves the results of its tests to speed up -reconfiguring, and a file `config.log' containing compiler output -(useful mainly for debugging `configure'). - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If at some point `config.cache' -contains results you don't want to keep, you may remove or edit it. - - The file `configure.in' is used to create `configure' by a program -called `autoconf'. You only need `configure.in' if you want to change -it or regenerate `configure' using a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. You can give `configure' -initial values for variables by setting them in the environment. Using -a Bourne-compatible shell, you can do that on the command line like -this: - CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure - -Or on systems that have the `env' program, you can do it like this: - env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - If you have to use a `make' that does not supports the `VPATH' -variable, you have to compile the package for one architecture at a time -in the source code directory. After you have installed the package for -one architecture, use `make distclean' before reconfiguring for another -architecture. - -Installation Names -================== - - By default, `make install' will install the package's files in -`/opt/collectd'. You can specify an installation prefix other than -`/opt/collectd' by giving `configure' the option `--prefix=PATH'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - - There may be some features `configure' can not figure out -automatically, but needs to determine by the type of host the package -will run on. Usually `configure' can figure that out, but if it prints -a message saying it can not guess the host type, give it the -`--host=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name with three fields: - CPU-COMPANY-SYSTEM - -See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the host type. - - If you are building compiler tools for cross-compiling, you can also -use the `--target=TYPE' option to select the type of system they will -produce code for and the `--build=TYPE' option to select the type of -system on which you are compiling the package. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Operation Controls -================== - - `configure' recognizes the following options to control how it -operates. - -`--cache-file=FILE' - Use and save the results of the tests in FILE instead of - `./config.cache'. Set FILE to `/dev/null' to disable caching, for - debugging `configure'. - -`--help' - Print a summary of the options to `configure', and exit. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`--version' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`configure' also accepts some other, not widely useful, options. diff --git a/src/config.h.in b/src/config.h.in deleted file mode 100644 index 33baece7..00000000 --- a/src/config.h.in +++ /dev/null @@ -1,277 +0,0 @@ -/* src/config.h.in. Generated from configure.in by autoheader. */ - -/* Wether or not to collect CPU usage statistics */ -#undef COLLECT_CPU - -/* Wether or not to collect cpu frequency statistics */ -#undef COLLECT_CPUFREQ - -/* Wether or not to collect diskstats */ -#undef COLLECT_DISK - -/* Wether or not to collect hdd temperature statistics */ -#undef COLLECT_HDDTEMP - -/* Wether or not to collect system load statistics */ -#undef COLLECT_LOAD - -/* Wether or not to collect memory statistics */ -#undef COLLECT_MEMORY - -/* Wether or not to collect nfs statistics */ -#undef COLLECT_NFS - -/* Wether or not to collect ping statistics */ -#undef COLLECT_PING - -/* Wether or not to collect processes statistics */ -#undef COLLECT_PROCESSES - -/* Wether or not to collect lm_sensors statistics */ -#undef COLLECT_SENSORS - -/* Wether or not to collect serial statistics */ -#undef COLLECT_SERIAL - -/* Wether or not to collect swap statistics */ -#undef COLLECT_SWAP - -/* Wether or not to collect tape statistics */ -#undef COLLECT_TAPE - -/* Wether or not to collect network traffic statistics */ -#undef COLLECT_TRAFFIC - -/* Wether or not to collect user count statistics */ -#undef COLLECT_USERS - -/* Define to 1 if you have the header file. */ -#undef HAVE_ARPA_INET_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_DLFCN_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_ERRNO_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_FCNTL_H - -/* Define to 1 if you have the `gethostbyname' function. */ -#undef HAVE_GETHOSTBYNAME - -/* Define to 1 if you have the `getloadavg' function. */ -#undef HAVE_GETLOADAVG - -/* Define to 1 if you have the `gettimeofday' function. */ -#undef HAVE_GETTIMEOFDAY - -/* Define to 1 if you have the `getutent' function. */ -#undef HAVE_GETUTENT - -/* Define to 1 if you have the `getutxent' function. */ -#undef HAVE_GETUTXENT - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_KSTAT_H - -/* Define to 1 if you have the `devinfo' library (-ldevinfo). */ -#undef HAVE_LIBDEVINFO - -/* Define to 1 if you have the `devstat' library (-ldevstat). */ -#undef HAVE_LIBDEVSTAT - -/* Define to 1 if you have the `dl' library (-ldl). */ -#undef HAVE_LIBDL - -/* Define to 1 if you have the `kstat' library (-lkstat). */ -#undef HAVE_LIBKSTAT - -/* Define to 1 if you have the `kvm' library (-lkvm). */ -#undef HAVE_LIBKVM - -/* Define to 1 if you have the `m' library (-lm). */ -#undef HAVE_LIBM - -/* Define to 1 if you have the `nsl' library (-lnsl). */ -#undef HAVE_LIBNSL - -/* Define to 1 if you have the `resolv' library (-lresolv). */ -#undef HAVE_LIBRESOLV - -/* Define to 1 if you have the `rrd' library (-lrrd). */ -#undef HAVE_LIBRRD - -/* Define to 1 if you have the sensors library (-lsensors). */ -#undef HAVE_LIBSENSORS - -/* Define to 1 if you have the `socket' library (-lsocket). */ -#undef HAVE_LIBSOCKET - -/* Define to 1 if you have the `statgrab' library (-lstatgrab). */ -#undef HAVE_LIBSTATGRAB - -/* Define to 1 if you have the `memcpy' function. */ -#undef HAVE_MEMCPY - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_NETDB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_NETINET_IN_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_RRD_H - -/* Define to 1 if you have the `select' function. */ -#undef HAVE_SELECT - -/* Define to 1 if you have the header file. */ -#undef HAVE_SENSORS_SENSORS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SIGNAL_H - -/* Define to 1 if you have the `socket' function. */ -#undef HAVE_SOCKET - -/* Define to 1 if you have the header file. */ -#undef HAVE_STATGRAB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the `strcasecmp' function. */ -#undef HAVE_STRCASECMP - -/* Define to 1 if you have the `strchr' function. */ -#undef HAVE_STRCHR - -/* Define to 1 if you have the `strcmp' function. */ -#undef HAVE_STRCMP - -/* Define to 1 if you have the `strdup' function. */ -#undef HAVE_STRDUP - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the `strlen' function. */ -#undef HAVE_STRLEN - -/* Define to 1 if you have the `strncasecmp' function. */ -#undef HAVE_STRNCASECMP - -/* Define to 1 if you have the `strncmp' function. */ -#undef HAVE_STRNCMP - -/* Define to 1 if you have the `strncpy' function. */ -#undef HAVE_STRNCPY - -/* Define to 1 if you have the `strstr' function. */ -#undef HAVE_STRSTR - -/* Define to 1 if you have the `strtol' function. */ -#undef HAVE_STRTOL - -/* Define to 1 if you have the `sysctlbyname' function. */ -#undef HAVE_SYSCTLBYNAME - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYSLOG_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_DKSTAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_LOADAVG_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_RESOURCE_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_SELECT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_SOCKET_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_SYSCTL_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TIMES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TIME_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have that is POSIX.1 compatible. */ -#undef HAVE_SYS_WAIT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UTMPX_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UTMP_H - -/* True if program is to be compiled for a Linux kernel */ -#undef KERNEL_LINUX - -/* True if program is to be compiled for a Solaris kernel */ -#undef KERNEL_SOLARIS - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Define to 1 if you can safely include both and . */ -#undef TIME_WITH_SYS_TIME - -/* Version number of package */ -#undef VERSION - -/* Define to empty if `const' does not conform to ANSI C. */ -#undef const - -/* Define to `int' if does not define. */ -#undef pid_t - -/* Define to `unsigned' if does not define. */ -#undef size_t -- 2.11.0