From: Florian Forster Date: Mon, 16 Feb 2009 16:49:38 +0000 (+0100) Subject: collectd.conf(5): Fixed and improved the section about the filter mechanism. X-Git-Tag: collectd-4.6.0~4 X-Git-Url: https://git.verplant.org/?a=commitdiff_plain;h=ab37cef6e61fa75ea0f92d4be22ef5d80b012780;p=collectd.git collectd.conf(5): Fixed and improved the section about the filter mechanism. --- diff --git a/src/collectd.conf.pod b/src/collectd.conf.pod index 607bb2fa..a1c2b073 100644 --- a/src/collectd.conf.pod +++ b/src/collectd.conf.pod @@ -2951,16 +2951,16 @@ only one such notification is generated until the value appears again. =head1 FILTER CONFIGURATION -TODO: Update this entire section once development is done. - Starting with collectd 4.6 there is a powerful filtering infrastructure -implemented in the daemon. The concept has mostly been copied from I, -the packet filter infrastructure for Linux. We'll use a similar terminology, so -that users that are familiar with iptables feel right at home. +implemented in the daemon. The concept has mostly been copied from +I, the packet filter infrastructure for Linux. We'll use a similar +terminology, so that users that are familiar with iptables feel right at home. =head2 Terminology -The most important terms are: +The following are the terms used in the remainder of the filter configuration +documentation. For an ASCII-art schema of the mechanism, see +L<"General structure"> below. =over 4 @@ -2969,15 +2969,18 @@ The most important terms are: A I is a criteria to select specific values. Examples are, of course, the name of the value or it's current value. +Matches are implemented in plugins which you have to load prior to using the +match. The name of such plugins starts with the "match_" prefix. + =item B A I is some action that is to be performed with data. Such actions could, for example, be to change part of the value's identifier or to ignore -the value completely. Built-in functions are B and B, see below. +the value completely. -Some targets, for example the built-in B target, signal that processing -of a value should be stopped. In that case processing of the current chain will -be aborted. +Some of these targets are built into the daemon, see L<"Built-in targets"> +below. Other targets are implemented in plugins which you have to load prior to +using the target. The name of such plugins starts with the "target_" prefix. =item B @@ -2986,18 +2989,14 @@ I. The target actions will be performed for all values for which B matches apply. If the rule does not have any matches associated with it, the target action will be performed for all values. -If any target returns the stop condition, the processing will stop right away. -This means that any targets following the current one will not be called after -the stop condition has been returned. - =item B A I is a list of rules and possibly default targets. The rules are tried in order and if one matches, the associated target will be called. If a value is handled by a rule, it depends on the target whether or not any subsequent -rules are considered or if traversal of the chain is aborted. After all rules -have been checked and no target returned the stop condition, the default -targets will be executed. +rules are considered or if traversal of the chain is aborted, see +L<"Flow control"> below. After all rules have been checked, the default targets +will be executed. =back @@ -3034,6 +3033,40 @@ The following shows the resulting structure: ! Target ! +---------+ +=head2 Flow control + +There are four ways to control which way a value takes through the filter +mechanism: + +=over 4 + +=item B + +The built-in B target can be used to "call" another chain, i.Ee. +process the value with another chain. When the called chain finishes, usually +the next target or rule after the jump is executed. + +=item B + +The stop condition, signaled for example by the built-in target B, causes +all processing of the value to be stopped immediately. + +=item B + +Causes processing in the current chain to be aborted, but processing of the +value generally will continue. This means that if the chain was called via +B, the next target or rule after the jump will be executed. If the chain +was not called by another chain, control will be returned to the daemon and it +may pass the value to another chain. + +=item B + +Most targets will signal the B condition, meaning that processing +should continue normally. There is no special built-in target for this +condition. + +=back + =head2 Synopsis The configuration reflects this structure directly: @@ -3102,7 +3135,7 @@ read-plugins to the write-plugins: : dispatch values : + - - - - - - - - - + -After the values are passed from the read-plugins to the dispatch functions, +After the values are passed from the "read" plugins to the dispatch functions, the pre-cache chain is run first. The values are added to the internal cache afterwards. The post-cache chain is run after the values have been added to the cache. So why is it such a huge deal if chains are run before or after the @@ -3110,10 +3143,10 @@ values have been added to this cache? Targets that change the identifier of a value list should be executed before the values are added to the cache, so that the name in the cache matches the -name that is used in the write-plugins. The C plugin, too, uses this -cache to receive a list of all available values. If you change the identifier -after the value list has been added to the cache, this may easily lead to -confusion, but it's not forbidden of course. +name that is used in the "write" plugins. The C plugin, too, uses +this cache to receive a list of all available values. If you change the +identifier after the value list has been added to the cache, this may easily +lead to confusion, but it's not forbidden of course. The cache is also used to convert counter values to rates. These rates are, for example, used by the C match (see below). If you use the rate stored in @@ -3187,11 +3220,11 @@ plugins to be loaded: =item B -Signals the "return" condition. This causes the current chain to stop -processing the value and returns control to the calling chain. The calling -chain will continue processing targets and rules just after the B target -(see below). This is very similar to the B target of iptables, see -L. +Signals the "return" condition, see the L<"Flow control"> section above. This +causes the current chain to stop processing the value and returns control to +the calling chain. The calling chain will continue processing targets and rules +just after the B target (see below). This is very similar to the +B target of iptables, see L. This target does not have any options. @@ -3201,9 +3234,9 @@ Example: =item B -Signals the "stop" condition, causing processing of the value to be aborted -immediately. This is similar to the B target of iptables, see -L. +Signals the "stop" condition, see the L<"Flow control"> section above. This +causes processing of the value to be aborted immediately. This is similar to +the B target of iptables, see L. This target does not have any options. @@ -3213,7 +3246,7 @@ Example: =item B -Sends the value to write plugins. +Sends the value to "write" plugins. Available options: @@ -3237,11 +3270,11 @@ Example: =item B -Starts processing the rules of another chain. If the end of that chain is -reached, or a stop condition is encountered, processing will continue right -after the B target, i.Ee. with the next target or the next rule. -This is similar to the B<-j> command line option of iptables, see -L. +Starts processing the rules of another chain, see L<"Flow control"> above. If +the end of that chain is reached, or a stop condition is encountered, +processing will continue right after the B target, i.Ee. with the +next target or the next rule. This is similar to the B<-j> command line option +of iptables, see L. Available options: