wireless plugins: Interpret noise/power values >100 as (dBm + 256).

Hi list,

I currently develop an embedded statistics application and web interface
for OpenWrt Kamikaze based on Collectd and RRDTool.

While working with the wireless plugin I noticed some incompatibilities
with different drivers, namely the Broadcom proprietary driver and madwifi.

  /proc/net/wireless on Broadcom:

   Inter-| sta-|   Quality        |   Discarded packets               | Missed | WE
    face | tus | link level noise |  nwid  crypt   frag  retry   misc | beacon | 18
      wl0: 0000    2.  179.  163.       0      0   8040    723      0        0

  With the Broadcom proprietary driver you get the actual signal and noise
  dbm units by substracting 255 from the values in /proc:

   level: 179 - 255 = -76 dBm
   noise: 163 - 255 = -92 dBm

  /proc/net/wireless on Atheros SoC:

   Inter-| sta-|   Quality        |   Discarded packets               | Missed | WE
    face | tus | link level noise |  nwid  crypt   frag  retry   misc | beacon | 22
     ath0: 0004   21.  -73.  -94.   21841      0      0      0      0        0

  Madwifi writes the actual dBm values into /proc.

So we have (at least for now) three possible types of values:

   ( x > 0.0   && x <= 100.0 )	current implementation: x is in percent (?)

   ( x > 100.0 && x <= 255.0 )	broadcom: range intersects with percents but
				values below 100.0 (100.0 - 255.0 = -155.0 dBm)
				are somewhat unlikely to occur

   ( x < 0.0 )			atheros: value is already in dBm

A patch which implements the two additional possibilities in collectd's wireless
plugin can be found in the OpenWrt Trac:

https://dev.openwrt.org/browser/packages/utils/collectd/patches/200-wireless-compat.patch

The patch was made against v4.4.0 of collectd but should work with v4.4.1 too.
It would be nice to have this in the next release or so :)

Greetings,
JoW

diff --git a/src/wireless.c b/src/wireless.c
index 285fb74..fdea9d3 100644 (file)
--- a/src/wireless.c
+++ b/src/wireless.c
@@ -128,7 +128,9 @@ static int wireless_read (void)
                        power = 1.0; /* invalid */
                else if ((power >= 0.0) && (power <= 100.0))
                        power = wireless_percent_to_power (power);
-               else if (power > 100.0)
+               else if ((power > 100.0) && (power <= 256.0))
+                       power = power - 256.0;
+               else if (power > 0.0)
                        power = 1.0; /* invalid */
 
                /* noise [dBm] < 0.0 */
@@ -137,7 +139,9 @@ static int wireless_read (void)
                        noise = 1.0; /* invalid */
                else if ((noise >= 0.0) && (noise <= 100.0))
                        noise = wireless_percent_to_power (noise);
-               else if (noise > 100.0)
+               else if ((noise > 100.0) && (noise <= 256.0))
+                       noise = noise - 256.0;
+               else if (noise > 0.0)
                        noise = 1.0; /* invalid */
 
                wireless_submit (device, "signal_quality", quality);