git-core-*/?*
test-date
test-delta
+test-dump-cache-tree
common-cmds.h
*.tar.gz
*.dsc
-A short git tutorial
-====================
+A git core tutorial for developers
+==================================
Introduction
------------
<1> running without "--full" is usually cheap and assures the
repository health reasonably well.
<2> check how many loose objects there are and how much
-diskspace is wasted by not repacking.
+disk space is wasted by not repacking.
<3> without "-a" repacks incrementally. repacking every 4-5MB
of loose objects accumulation may be a good rule of thumb.
<4> after repack, prune removes the duplicate loose objects.
----------------------------------------------------------------------
A standalone individual developer does not exchange patches with
-other poeple, and works alone in a single repository, using the
+other people, and works alone in a single repository, using the
following commands.
* gitlink:git-show-branch[1] to see where you are.
Run git-daemon to serve /pub/scm from inetd.::
+
------------
-$ grep git /etc/inet.conf
+$ grep git /etc/inetd.conf
git stream tcp nowait nobody \
/usr/bin/git-daemon git-daemon --inetd --syslog --export-all /pub/scm
------------
SYNOPSIS
--------
[verse]
-'git-clone' [-l [-s]] [-q] [-n] [--bare] [-o <name>] [-u <upload-pack>]
- [--reference <repository>]
+'git-clone' [--template=<template_directory>] [-l [-s]] [-q] [-n] [--bare]
+ [-o <name>] [-u <upload-pack>] [--reference <repository>]
<repository> [<directory>]
DESCRIPTION
the command to specify non-default path for the command
run on the other end.
+--template=<template_directory>::
+ Specify the directory from which templates will be used;
+ if unset the templates are taken from the installation
+ defined default, typically `/usr/share/git-core/templates`.
+
<repository>::
The (possibly remote) repository to clone from. It can
be any URL git-fetch supports.
pages for any of the git commands; one good place to start would be
with the commands mentioned in link:everyday.html[Everyday git]. You
should be able to find any unknown jargon in the
-link:glossary.html[Glosssay].
+link:glossary.html[Glossary].
The link:cvs-migration.html[CVS migration] document explains how to
import a CVS repository into git, and shows how to use git in a
-------------------------------------
allows you to browse any commits from the last 2 weeks of commits
-that modified files under the "drivers" directory.
+that modified files under the "drivers" directory. (Note: you can
+adjust gitk's fonts by holding down the control key while pressing
+"-" or "+".)
Finally, most commands that take filenames will optionally allow you
to precede any filename by a commit, to specify a particular version
-fo the file:
+of the file:
-------------------------------------
$ git diff v2.5:Makefile HEAD:Makefile.in
-------------------------------------
+You can also use "git cat-file -p" to see any such file:
+
+-------------------------------------
+$ git cat-file -p v2.5:Makefile
+-------------------------------------
+
Next Steps
----------
diffcore-delta.o log-tree.o
LIB_OBJS = \
- blob.o commit.o connect.o csum-file.o base85.o \
+ blob.o commit.o connect.o csum-file.o cache-tree.o base85.o \
date.o diff-delta.o entry.o exec_cmd.o ident.o index.o \
object.o pack-check.o patch-delta.o path.o pkt-line.o \
quote.o read-cache.o refs.o run-command.o dir.o \
test-delta$X: test-delta.c diff-delta.o patch-delta.o
$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $^
+test-dump-cache-tree$X: dump-cache-tree.o $(GITLIBS)
+ $(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
+
check:
for i in *.c; do sparse $(ALL_CFLAGS) $(SPARSE_FLAGS) $$i || exit; done
#include "cache.h"
#include "builtin.h"
#include "dir.h"
+#include "cache-tree.h"
static const char builtin_add_usage[] =
"git-add [-n] [-v] <filepattern>...";
die("unable to add %s to index",path);
if (verbose)
printf("add '%s'\n", path);
+ cache_tree_invalidate_path(active_cache_tree, path);
return 0;
}
*/
#include <fnmatch.h>
#include "cache.h"
+#include "cache-tree.h"
#include "quote.h"
#include "blob.h"
#include "delta.h"
static int apply_one_fragment(struct buffer_desc *desc, struct fragment *frag)
{
+ int match_beginning, match_end;
char *buf = desc->buffer;
const char *patch = frag->patch;
int offset, size = frag->size;
newlines = new;
leading = frag->leading;
trailing = frag->trailing;
+
+ /*
+ * If we don't have any leading/trailing data in the patch,
+ * we want it to match at the beginning/end of the file.
+ */
+ match_beginning = !leading && (frag->oldpos == 1);
+ match_end = !trailing;
+
lines = 0;
pos = frag->newpos;
for (;;) {
offset = find_offset(buf, desc->size, oldlines, oldsize, pos, &lines);
+ if (match_end && offset + oldsize != desc->size)
+ offset = -1;
+ if (match_beginning && offset)
+ offset = -1;
if (offset >= 0) {
int diff = newsize - oldsize;
unsigned long size = desc->size + diff;
/* Am I at my context limits? */
if ((leading <= p_context) && (trailing <= p_context))
break;
+ if (match_beginning || match_end) {
+ match_beginning = match_end = 0;
+ continue;
+ }
/* Reduce the number of context lines
* Reduce both leading and trailing if they are equal
* otherwise just reduce the larger context.
if (write_index) {
if (remove_file_from_cache(patch->old_name) < 0)
die("unable to remove %s from index", patch->old_name);
+ cache_tree_invalidate_path(active_cache_tree, patch->old_name);
}
if (!cached)
unlink(patch->old_name);
if (!mode)
mode = S_IFREG | 0644;
- create_one_file(path, mode, buf, size);
+ create_one_file(path, mode, buf, size);
add_index_file(path, mode, buf, size);
+ cache_tree_invalidate_path(active_cache_tree, path);
}
static void write_out_one_result(struct patch *patch)
/* custom pretty-print here */
if (!strcmp(type, tree_type))
- return execl_git_cmd("ls-tree", argv[2], NULL);
+ return cmd_ls_tree(2, argv + 1, NULL);
buf = read_sha1_file(sha1, type, &size);
if (!buf)
if (opt->diffopt.detect_rename)
opt->diffopt.setup |= (DIFF_SETUP_USE_SIZE_CACHE |
DIFF_SETUP_USE_CACHE);
- while (fgets(line, sizeof(line), stdin))
- if (line[0] == '\n')
+ while (fgets(line, sizeof(line), stdin)) {
+ unsigned char sha1[20];
+
+ if (get_sha1_hex(line, sha1)) {
+ fputs(line, stdout);
fflush(stdout);
+ }
else
diff_tree_stdin(line);
-
+ }
return 0;
}
}
argc = j;
- if (numbered && start_number < 0)
+ if (start_number < 0)
start_number = 1;
- if (numbered && keep_subject < 0)
+ if (numbered && keep_subject)
die ("-n and -k are mutually exclusive.");
argc = setup_revisions(argc, argv, &rev, "HEAD");
while (0 <= --nr) {
int shown;
commit = list[nr];
- rev.nr = rev.total - nr;
+ rev.nr = total - nr + (start_number - 1);
if (!use_stdout)
reopen_stdout(commit, rev.nr, keep_subject);
shown = log_tree_commit(&rev, commit);
free(commit->buffer);
commit->buffer = NULL;
+
+ /* We put one extra blank line between formatted
+ * patches and this flag is used by log-tree code
+ * to see if it needs to emit a LF before showing
+ * the log; when using one file per patch, we do
+ * not want the extra blank line.
+ */
+ if (!use_stdout)
+ rev.shown_one = 0;
if (shown) {
if (rev.mime_boundary)
printf("\n--%s%s--\n\n\n",
#include "object.h"
#include "tree.h"
+#include "cache-tree.h"
#include <sys/time.h>
#include <signal.h>
#include "builtin.h"
die("Entry '%s' not uptodate. Cannot merge.", ce->name);
}
+static void invalidate_ce_path(struct cache_entry *ce)
+{
+ if (ce)
+ cache_tree_invalidate_path(active_cache_tree, ce->name);
+}
+
/*
* We do not want to remove or overwrite a working tree file that
* is not tracked.
*merge = *old;
} else {
verify_uptodate(old);
+ invalidate_ce_path(old);
}
}
- else
+ else {
verify_absent(merge->name, "overwritten");
+ invalidate_ce_path(merge);
+ }
merge->ce_flags &= ~htons(CE_STAGEMASK);
add_cache_entry(merge, ADD_CACHE_OK_TO_ADD);
verify_absent(ce->name, "removed");
ce->ce_mode = 0;
add_cache_entry(ce, ADD_CACHE_OK_TO_ADD);
+ invalidate_ce_path(ce);
return 1;
}
struct cache_entry *ce = active_cache[i];
if (ce_stage(ce)) {
deleted++;
+ invalidate_ce_path(ce);
continue;
}
if (deleted)
return deleted;
}
+static void prime_cache_tree_rec(struct cache_tree *it, struct tree *tree)
+{
+ struct tree_entry_list *ent;
+ int cnt;
+
+ memcpy(it->sha1, tree->object.sha1, 20);
+ for (cnt = 0, ent = tree->entries; ent; ent = ent->next) {
+ if (!ent->directory)
+ cnt++;
+ else {
+ struct cache_tree_sub *sub;
+ struct tree *subtree = (struct tree *)ent->item.tree;
+ if (!subtree->object.parsed)
+ parse_tree(subtree);
+ sub = cache_tree_sub(it, ent->name);
+ sub->cache_tree = cache_tree();
+ prime_cache_tree_rec(sub->cache_tree, subtree);
+ cnt += sub->cache_tree->entry_count;
+ }
+ }
+ it->entry_count = cnt;
+}
+
+static void prime_cache_tree(void)
+{
+ struct tree *tree = (struct tree *)trees->item;
+ if (!tree)
+ return;
+ active_cache_tree = cache_tree();
+ prime_cache_tree_rec(active_cache_tree, tree);
+
+}
+
static const char read_tree_usage[] = "git-read-tree (<sha> | -m [--aggressive] [-u | -i] <sha1> [<sha2> [<sha3>]])";
static struct cache_file cache_file;
fn = twoway_merge;
break;
case 3:
- fn = threeway_merge;
- break;
default:
fn = threeway_merge;
+ cache_tree_free(&active_cache_tree);
break;
}
}
unpack_trees(fn);
+
+ /*
+ * When reading only one tree (either the most basic form,
+ * "-m ent" or "--reset ent" form), we can obtain a fully
+ * valid cache-tree because the index must match exactly
+ * what came from the tree.
+ */
+ if (trees && trees->item && (!merge || (stage == 2))) {
+ cache_tree_free(&active_cache_tree);
+ prime_cache_tree();
+ }
+
if (write_cache(newfd, active_cache, active_nr) ||
commit_index_file(&cache_file))
die("unable to write new index file");
if (obj->flags & (UNINTERESTING | SEEN))
return p;
obj->flags |= SEEN;
+ name = strdup(name);
return add_object(obj, p, path, name);
}
if (parse_tree(tree) < 0)
die("bad tree object %s", sha1_to_hex(obj->sha1));
obj->flags |= SEEN;
+ name = strdup(name);
p = add_object(obj, p, path, name);
me.up = path;
me.elem = name;
p = process_tree(entry->item.tree, p, &me, entry->name);
else
p = process_blob(entry->item.blob, p, &me, entry->name);
+ free(entry->name);
free(entry);
entry = next;
}
#include "cache.h"
#include "builtin.h"
#include "dir.h"
+#include "cache-tree.h"
static const char builtin_rm_usage[] =
"git-rm [-n] [-v] [-f] <filepattern>...";
if (remove_file_from_cache(path))
die("git rm: unable to remove %s", path);
+ cache_tree_invalidate_path(active_cache_tree, path);
}
/*
--- /dev/null
+#include "cache.h"
+#include "tree.h"
+#include "cache-tree.h"
+
+#define DEBUG 0
+
+struct cache_tree *cache_tree(void)
+{
+ struct cache_tree *it = xcalloc(1, sizeof(struct cache_tree));
+ it->entry_count = -1;
+ return it;
+}
+
+void cache_tree_free(struct cache_tree **it_p)
+{
+ int i;
+ struct cache_tree *it = *it_p;
+
+ if (!it)
+ return;
+ for (i = 0; i < it->subtree_nr; i++)
+ if (it->down[i])
+ cache_tree_free(&it->down[i]->cache_tree);
+ free(it->down);
+ free(it);
+ *it_p = NULL;
+}
+
+static int subtree_name_cmp(const char *one, int onelen,
+ const char *two, int twolen)
+{
+ if (onelen < twolen)
+ return -1;
+ if (twolen < onelen)
+ return 1;
+ return memcmp(one, two, onelen);
+}
+
+static int subtree_pos(struct cache_tree *it, const char *path, int pathlen)
+{
+ struct cache_tree_sub **down = it->down;
+ int lo, hi;
+ lo = 0;
+ hi = it->subtree_nr;
+ while (lo < hi) {
+ int mi = (lo + hi) / 2;
+ struct cache_tree_sub *mdl = down[mi];
+ int cmp = subtree_name_cmp(path, pathlen,
+ mdl->name, mdl->namelen);
+ if (!cmp)
+ return mi;
+ if (cmp < 0)
+ hi = mi;
+ else
+ lo = mi + 1;
+ }
+ return -lo-1;
+}
+
+static struct cache_tree_sub *find_subtree(struct cache_tree *it,
+ const char *path,
+ int pathlen,
+ int create)
+{
+ struct cache_tree_sub *down;
+ int pos = subtree_pos(it, path, pathlen);
+ if (0 <= pos)
+ return it->down[pos];
+ if (!create)
+ return NULL;
+
+ pos = -pos-1;
+ if (it->subtree_alloc <= it->subtree_nr) {
+ it->subtree_alloc = alloc_nr(it->subtree_alloc);
+ it->down = xrealloc(it->down, it->subtree_alloc *
+ sizeof(*it->down));
+ }
+ it->subtree_nr++;
+
+ down = xmalloc(sizeof(*down) + pathlen + 1);
+ down->cache_tree = NULL;
+ down->namelen = pathlen;
+ memcpy(down->name, path, pathlen);
+ down->name[pathlen] = 0;
+
+ if (pos < it->subtree_nr)
+ memmove(it->down + pos + 1,
+ it->down + pos,
+ sizeof(down) * (it->subtree_nr - pos - 1));
+ it->down[pos] = down;
+ return down;
+}
+
+struct cache_tree_sub *cache_tree_sub(struct cache_tree *it, const char *path)
+{
+ int pathlen = strlen(path);
+ return find_subtree(it, path, pathlen, 1);
+}
+
+void cache_tree_invalidate_path(struct cache_tree *it, const char *path)
+{
+ /* a/b/c
+ * ==> invalidate self
+ * ==> find "a", have it invalidate "b/c"
+ * a
+ * ==> invalidate self
+ * ==> if "a" exists as a subtree, remove it.
+ */
+ const char *slash;
+ int namelen;
+ struct cache_tree_sub *down;
+
+#if DEBUG
+ fprintf(stderr, "cache-tree invalidate <%s>\n", path);
+#endif
+
+ if (!it)
+ return;
+ slash = strchr(path, '/');
+ it->entry_count = -1;
+ if (!slash) {
+ int pos;
+ namelen = strlen(path);
+ pos = subtree_pos(it, path, namelen);
+ if (0 <= pos) {
+ cache_tree_free(&it->down[pos]->cache_tree);
+ free(it->down[pos]);
+ /* 0 1 2 3 4 5
+ * ^ ^subtree_nr = 6
+ * pos
+ * move 4 and 5 up one place (2 entries)
+ * 2 = 6 - 3 - 1 = subtree_nr - pos - 1
+ */
+ memmove(it->down+pos, it->down+pos+1,
+ sizeof(struct cache_tree_sub *) *
+ (it->subtree_nr - pos - 1));
+ it->subtree_nr--;
+ }
+ return;
+ }
+ namelen = slash - path;
+ down = find_subtree(it, path, namelen, 0);
+ if (down)
+ cache_tree_invalidate_path(down->cache_tree, slash + 1);
+}
+
+static int verify_cache(struct cache_entry **cache,
+ int entries)
+{
+ int i, funny;
+
+ /* Verify that the tree is merged */
+ funny = 0;
+ for (i = 0; i < entries; i++) {
+ struct cache_entry *ce = cache[i];
+ if (ce_stage(ce)) {
+ if (10 < ++funny) {
+ fprintf(stderr, "...\n");
+ break;
+ }
+ fprintf(stderr, "%s: unmerged (%s)\n",
+ ce->name, sha1_to_hex(ce->sha1));
+ }
+ }
+ if (funny)
+ return -1;
+
+ /* Also verify that the cache does not have path and path/file
+ * at the same time. At this point we know the cache has only
+ * stage 0 entries.
+ */
+ funny = 0;
+ for (i = 0; i < entries - 1; i++) {
+ /* path/file always comes after path because of the way
+ * the cache is sorted. Also path can appear only once,
+ * which means conflicting one would immediately follow.
+ */
+ const char *this_name = cache[i]->name;
+ const char *next_name = cache[i+1]->name;
+ int this_len = strlen(this_name);
+ if (this_len < strlen(next_name) &&
+ strncmp(this_name, next_name, this_len) == 0 &&
+ next_name[this_len] == '/') {
+ if (10 < ++funny) {
+ fprintf(stderr, "...\n");
+ break;
+ }
+ fprintf(stderr, "You have both %s and %s\n",
+ this_name, next_name);
+ }
+ }
+ if (funny)
+ return -1;
+ return 0;
+}
+
+static void discard_unused_subtrees(struct cache_tree *it)
+{
+ struct cache_tree_sub **down = it->down;
+ int nr = it->subtree_nr;
+ int dst, src;
+ for (dst = src = 0; src < nr; src++) {
+ struct cache_tree_sub *s = down[src];
+ if (s->used)
+ down[dst++] = s;
+ else {
+ cache_tree_free(&s->cache_tree);
+ free(s);
+ it->subtree_nr--;
+ }
+ }
+}
+
+int cache_tree_fully_valid(struct cache_tree *it)
+{
+ int i;
+ if (!it)
+ return 0;
+ if (it->entry_count < 0 || !has_sha1_file(it->sha1))
+ return 0;
+ for (i = 0; i < it->subtree_nr; i++) {
+ if (!cache_tree_fully_valid(it->down[i]->cache_tree))
+ return 0;
+ }
+ return 1;
+}
+
+static int update_one(struct cache_tree *it,
+ struct cache_entry **cache,
+ int entries,
+ const char *base,
+ int baselen,
+ int missing_ok,
+ int dryrun)
+{
+ unsigned long size, offset;
+ char *buffer;
+ int i;
+
+ if (0 <= it->entry_count && has_sha1_file(it->sha1))
+ return it->entry_count;
+
+ /*
+ * We first scan for subtrees and update them; we start by
+ * marking existing subtrees -- the ones that are unmarked
+ * should not be in the result.
+ */
+ for (i = 0; i < it->subtree_nr; i++)
+ it->down[i]->used = 0;
+
+ /*
+ * Find the subtrees and update them.
+ */
+ for (i = 0; i < entries; i++) {
+ struct cache_entry *ce = cache[i];
+ struct cache_tree_sub *sub;
+ const char *path, *slash;
+ int pathlen, sublen, subcnt;
+
+ path = ce->name;
+ pathlen = ce_namelen(ce);
+ if (pathlen <= baselen || memcmp(base, path, baselen))
+ break; /* at the end of this level */
+
+ slash = strchr(path + baselen, '/');
+ if (!slash)
+ continue;
+ /*
+ * a/bbb/c (base = a/, slash = /c)
+ * ==>
+ * path+baselen = bbb/c, sublen = 3
+ */
+ sublen = slash - (path + baselen);
+ sub = find_subtree(it, path + baselen, sublen, 1);
+ if (!sub->cache_tree)
+ sub->cache_tree = cache_tree();
+ subcnt = update_one(sub->cache_tree,
+ cache + i, entries - i,
+ path,
+ baselen + sublen + 1,
+ missing_ok,
+ dryrun);
+ i += subcnt - 1;
+ sub->used = 1;
+ }
+
+ discard_unused_subtrees(it);
+
+ /*
+ * Then write out the tree object for this level.
+ */
+ size = 8192;
+ buffer = xmalloc(size);
+ offset = 0;
+
+ for (i = 0; i < entries; i++) {
+ struct cache_entry *ce = cache[i];
+ struct cache_tree_sub *sub;
+ const char *path, *slash;
+ int pathlen, entlen;
+ const unsigned char *sha1;
+ unsigned mode;
+
+ path = ce->name;
+ pathlen = ce_namelen(ce);
+ if (pathlen <= baselen || memcmp(base, path, baselen))
+ break; /* at the end of this level */
+
+ slash = strchr(path + baselen, '/');
+ if (slash) {
+ entlen = slash - (path + baselen);
+ sub = find_subtree(it, path + baselen, entlen, 0);
+ if (!sub)
+ die("cache-tree.c: '%.*s' in '%s' not found",
+ entlen, path + baselen, path);
+ i += sub->cache_tree->entry_count - 1;
+ sha1 = sub->cache_tree->sha1;
+ mode = S_IFDIR;
+ }
+ else {
+ sha1 = ce->sha1;
+ mode = ntohl(ce->ce_mode);
+ entlen = pathlen - baselen;
+ }
+ if (!missing_ok && !has_sha1_file(sha1))
+ return error("invalid object %s", sha1_to_hex(sha1));
+
+ if (!ce->ce_mode)
+ continue; /* entry being removed */
+
+ if (size < offset + entlen + 100) {
+ size = alloc_nr(offset + entlen + 100);
+ buffer = xrealloc(buffer, size);
+ }
+ offset += sprintf(buffer + offset,
+ "%o %.*s", mode, entlen, path + baselen);
+ buffer[offset++] = 0;
+ memcpy(buffer + offset, sha1, 20);
+ offset += 20;
+
+#if DEBUG
+ fprintf(stderr, "cache-tree update-one %o %.*s\n",
+ mode, entlen, path + baselen);
+#endif
+ }
+
+ if (dryrun) {
+ unsigned char hdr[200];
+ int hdrlen;
+ write_sha1_file_prepare(buffer, offset, tree_type, it->sha1,
+ hdr, &hdrlen);
+ }
+ else
+ write_sha1_file(buffer, offset, tree_type, it->sha1);
+ free(buffer);
+ it->entry_count = i;
+#if DEBUG
+ fprintf(stderr, "cache-tree update-one (%d ent, %d subtree) %s\n",
+ it->entry_count, it->subtree_nr,
+ sha1_to_hex(it->sha1));
+#endif
+ return i;
+}
+
+int cache_tree_update(struct cache_tree *it,
+ struct cache_entry **cache,
+ int entries,
+ int missing_ok,
+ int dryrun)
+{
+ int i;
+ i = verify_cache(cache, entries);
+ if (i)
+ return i;
+ i = update_one(it, cache, entries, "", 0, missing_ok, dryrun);
+ if (i < 0)
+ return i;
+ return 0;
+}
+
+static void *write_one(struct cache_tree *it,
+ char *path,
+ int pathlen,
+ char *buffer,
+ unsigned long *size,
+ unsigned long *offset)
+{
+ int i;
+
+ /* One "cache-tree" entry consists of the following:
+ * path (NUL terminated)
+ * entry_count, subtree_nr ("%d %d\n")
+ * tree-sha1 (missing if invalid)
+ * subtree_nr "cache-tree" entries for subtrees.
+ */
+ if (*size < *offset + pathlen + 100) {
+ *size = alloc_nr(*offset + pathlen + 100);
+ buffer = xrealloc(buffer, *size);
+ }
+ *offset += sprintf(buffer + *offset, "%.*s%c%d %d\n",
+ pathlen, path, 0,
+ it->entry_count, it->subtree_nr);
+
+#if DEBUG
+ if (0 <= it->entry_count)
+ fprintf(stderr, "cache-tree <%.*s> (%d ent, %d subtree) %s\n",
+ pathlen, path, it->entry_count, it->subtree_nr,
+ sha1_to_hex(it->sha1));
+ else
+ fprintf(stderr, "cache-tree <%.*s> (%d subtree) invalid\n",
+ pathlen, path, it->subtree_nr);
+#endif
+
+ if (0 <= it->entry_count) {
+ memcpy(buffer + *offset, it->sha1, 20);
+ *offset += 20;
+ }
+ for (i = 0; i < it->subtree_nr; i++) {
+ struct cache_tree_sub *down = it->down[i];
+ if (i) {
+ struct cache_tree_sub *prev = it->down[i-1];
+ if (subtree_name_cmp(down->name, down->namelen,
+ prev->name, prev->namelen) <= 0)
+ die("fatal - unsorted cache subtree");
+ }
+ buffer = write_one(down->cache_tree, down->name, down->namelen,
+ buffer, size, offset);
+ }
+ return buffer;
+}
+
+void *cache_tree_write(struct cache_tree *root, unsigned long *size_p)
+{
+ char path[PATH_MAX];
+ unsigned long size = 8192;
+ char *buffer = xmalloc(size);
+
+ *size_p = 0;
+ path[0] = 0;
+ return write_one(root, path, 0, buffer, &size, size_p);
+}
+
+static struct cache_tree *read_one(const char **buffer, unsigned long *size_p)
+{
+ const char *buf = *buffer;
+ unsigned long size = *size_p;
+ const char *cp;
+ char *ep;
+ struct cache_tree *it;
+ int i, subtree_nr;
+
+ it = NULL;
+ /* skip name, but make sure name exists */
+ while (size && *buf) {
+ size--;
+ buf++;
+ }
+ if (!size)
+ goto free_return;
+ buf++; size--;
+ it = cache_tree();
+
+ cp = buf;
+ it->entry_count = strtol(cp, &ep, 10);
+ if (cp == ep)
+ goto free_return;
+ cp = ep;
+ subtree_nr = strtol(cp, &ep, 10);
+ if (cp == ep)
+ goto free_return;
+ while (size && *buf && *buf != '\n') {
+ size--;
+ buf++;
+ }
+ if (!size)
+ goto free_return;
+ buf++; size--;
+ if (0 <= it->entry_count) {
+ if (size < 20)
+ goto free_return;
+ memcpy(it->sha1, buf, 20);
+ buf += 20;
+ size -= 20;
+ }
+
+#if DEBUG
+ if (0 <= it->entry_count)
+ fprintf(stderr, "cache-tree <%s> (%d ent, %d subtree) %s\n",
+ *buffer, it->entry_count, subtree_nr,
+ sha1_to_hex(it->sha1));
+ else
+ fprintf(stderr, "cache-tree <%s> (%d subtrees) invalid\n",
+ *buffer, subtree_nr);
+#endif
+
+ /*
+ * Just a heuristic -- we do not add directories that often but
+ * we do not want to have to extend it immediately when we do,
+ * hence +2.
+ */
+ it->subtree_alloc = subtree_nr + 2;
+ it->down = xcalloc(it->subtree_alloc, sizeof(struct cache_tree_sub *));
+ for (i = 0; i < subtree_nr; i++) {
+ /* read each subtree */
+ struct cache_tree *sub;
+ struct cache_tree_sub *subtree;
+ const char *name = buf;
+
+ sub = read_one(&buf, &size);
+ if (!sub)
+ goto free_return;
+ subtree = cache_tree_sub(it, name);
+ subtree->cache_tree = sub;
+ }
+ if (subtree_nr != it->subtree_nr)
+ die("cache-tree: internal error");
+ *buffer = buf;
+ *size_p = size;
+ return it;
+
+ free_return:
+ cache_tree_free(&it);
+ return NULL;
+}
+
+struct cache_tree *cache_tree_read(const char *buffer, unsigned long size)
+{
+ if (buffer[0])
+ return NULL; /* not the whole tree */
+ return read_one(&buffer, &size);
+}
--- /dev/null
+#ifndef CACHE_TREE_H
+#define CACHE_TREE_H
+
+struct cache_tree;
+struct cache_tree_sub {
+ struct cache_tree *cache_tree;
+ int namelen;
+ int used;
+ char name[FLEX_ARRAY];
+};
+
+struct cache_tree {
+ int entry_count; /* negative means "invalid" */
+ unsigned char sha1[20];
+ int subtree_nr;
+ int subtree_alloc;
+ struct cache_tree_sub **down;
+};
+
+struct cache_tree *cache_tree(void);
+void cache_tree_free(struct cache_tree **);
+void cache_tree_invalidate_path(struct cache_tree *, const char *);
+struct cache_tree_sub *cache_tree_sub(struct cache_tree *, const char *);
+
+void *cache_tree_write(struct cache_tree *root, unsigned long *size_p);
+struct cache_tree *cache_tree_read(const char *buffer, unsigned long size);
+
+int cache_tree_fully_valid(struct cache_tree *);
+int cache_tree_update(struct cache_tree *, struct cache_entry **, int, int, int);
+
+#endif
extern struct cache_entry **active_cache;
extern unsigned int active_nr, active_alloc, active_cache_changed;
+extern struct cache_tree *active_cache_tree;
#define GIT_DIR_ENVIRONMENT "GIT_DIR"
#define DEFAULT_GIT_DIR_ENVIRONMENT ".git"
#include "cache.h"
#include "strbuf.h"
#include "quote.h"
+#include "cache-tree.h"
#define CHECKOUT_ALL 4
static const char *prefix;
sub svn_checkout_tree {
my ($svn_rev, $treeish) = @_;
my $from = file_to_s("$REV_DIR/$svn_rev");
- assert_svn_wc_clean($svn_rev);
assert_tree($from);
print "diff-tree $from $treeish\n";
my $pid = open my $diff_fh, '-|';
a_empty_crlf=
cd import
- cat >> kw.c <<''
+ cat >> kw.c <<\EOF
/* Make it look like somebody copied a file from CVS into SVN: */
/* $Id: kw.c,v 1.1.1.1 1994/03/06 00:00:00 eric Exp $ */
+EOF
printf "Hello\r\nWorld\r\n" > crlf
a_crlf=`git-hash-object -w crlf`
class GitView:
""" This is the main class
"""
- version = "0.7"
+ version = "0.8"
def __init__(self, with_diff=0):
self.with_diff = with_diff
self.accel_group = gtk.AccelGroup()
self.window.add_accel_group(self.accel_group)
+ self.accel_group.connect_group(0xffc2, 0, gtk.ACCEL_LOCKED, self.refresh);
- self.construct()
+ self.window.add(self.construct())
+
+ def refresh(self, widget, event=None, *arguments, **keywords):
+ self.get_encoding()
+ self.get_bt_sha1()
+ Commit.children_sha1 = {}
+ self.set_branch(sys.argv[without_diff:])
+ self.window.show()
+ return True
def get_bt_sha1(self):
""" Update the bt_sha1 dictionary with the
menu_bar.show()
vbox.pack_start(menu_bar, expand=False, fill=True)
vbox.pack_start(paned, expand=True, fill=True)
- self.window.add(vbox)
paned.show()
vbox.show()
+ return vbox
def construct_top(self):
try:
self.treeview.set_cursor(self.index[revid])
except KeyError:
- print "Revision %s not present in the list" % revid
+ dialog = gtk.MessageDialog(parent=None, flags=0,
+ type=gtk.MESSAGE_WARNING, buttons=gtk.BUTTONS_CLOSE,
+ message_format=None)
+ dialog.set_markup("Revision <b>%s</b> not present in the list" % revid)
# revid == 0 is the parent of the first commit
if (revid != 0 ):
- print "Try running gitview without any options"
+ dialog.format_secondary_text("Try running gitview without any options")
+ dialog.run()
+ dialog.destroy()
self.treeview.grab_focus()
window.set_diff(commit_sha1, parent_sha1, encoding)
self.treeview.grab_focus()
+without_diff = 0
if __name__ == "__main__":
- without_diff = 0
if (len(sys.argv) > 1 ):
if (sys.argv[1] == "--without-diff"):
<args>
All the valid option for git-rev-list(1)
+ Key Bindings:
+ F5:
+ To reread references.
EXAMPLES
------
or drivers/scsi subdirectories
gitview --since=2.weeks.ago
- Show the changes during the last two weeks
+ Show the changes during the last two weeks
-
--- /dev/null
+#include "cache.h"
+#include "tree.h"
+#include "cache-tree.h"
+
+
+static void dump_one(struct cache_tree *it, const char *pfx, const char *x)
+{
+ if (it->entry_count < 0)
+ printf("%-40s %s%s (%d subtrees)\n",
+ "invalid", x, pfx, it->subtree_nr);
+ else
+ printf("%s %s%s (%d entries, %d subtrees)\n",
+ sha1_to_hex(it->sha1), x, pfx,
+ it->entry_count, it->subtree_nr);
+}
+
+static int dump_cache_tree(struct cache_tree *it,
+ struct cache_tree *ref,
+ const char *pfx)
+{
+ int i;
+ int errs = 0;
+
+ if (!it || !ref)
+ /* missing in either */
+ return 0;
+
+ if (it->entry_count < 0) {
+ dump_one(it, pfx, "");
+ dump_one(ref, pfx, "#(ref) ");
+ if (it->subtree_nr != ref->subtree_nr)
+ errs = 1;
+ }
+ else {
+ dump_one(it, pfx, "");
+ if (memcmp(it->sha1, ref->sha1, 20) ||
+ ref->entry_count != it->entry_count ||
+ ref->subtree_nr != it->subtree_nr) {
+ dump_one(ref, pfx, "#(ref) ");
+ errs = 1;
+ }
+ }
+
+ for (i = 0; i < it->subtree_nr; i++) {
+ char path[PATH_MAX];
+ struct cache_tree_sub *down = it->down[i];
+ struct cache_tree_sub *rdwn;
+
+ rdwn = cache_tree_sub(ref, down->name);
+ sprintf(path, "%s%.*s/", pfx, down->namelen, down->name);
+ if (dump_cache_tree(down->cache_tree, rdwn->cache_tree, path))
+ errs = 1;
+ }
+ return errs;
+}
+
+int main(int ac, char **av)
+{
+ struct cache_tree *another = cache_tree();
+ if (read_cache() < 0)
+ die("unable to read index file");
+ cache_tree_update(another, active_cache, active_nr, 0, 1);
+ return dump_cache_tree(active_cache_tree, another, "");
+}
#include "tag.h"
#include "refs.h"
#include "pack.h"
+#include "cache-tree.h"
#define REACHABLE 0x0001
return 0;
}
+static int fsck_cache_tree(struct cache_tree *it)
+{
+ int i;
+ int err = 0;
+
+ if (0 <= it->entry_count) {
+ struct object *obj = parse_object(it->sha1);
+ if (!obj) {
+ error("%s: invalid sha1 pointer in cache-tree",
+ sha1_to_hex(it->sha1));
+ return 1;
+ }
+ mark_reachable(obj, REACHABLE);
+ obj->used = 1;
+ if (obj->type != tree_type)
+ err |= objerror(obj, "non-tree in cache-tree");
+ }
+ for (i = 0; i < it->subtree_nr; i++)
+ err |= fsck_cache_tree(it->down[i]->cache_tree);
+ return err;
+}
+
int main(int argc, char **argv)
{
int i, heads;
obj->used = 1;
mark_reachable(obj, REACHABLE);
}
+ if (active_cache_tree)
+ fsck_cache_tree(active_cache_tree);
}
check_connectivity();
ignoredonly=
cleandir=
quiet=
-rmf="rm -f"
-rmrf="rm -rf"
+rmf="rm -f --"
+rmrf="rm -rf --"
rm_refuse="echo Not removing"
echo1="echo"
unset CDPATH
usage() {
- echo >&2 "Usage: $0 [--use-separate-remote] [--reference <reference-repo>] [--bare] [-l [-s]] [-q] [-u <upload-pack>] [--origin <name>] [-n] <repo> [<dir>]"
+ echo >&2 "Usage: $0 [--template=<template_directory>] [--use-separate-remote] [--reference <reference-repo>] [--bare] [-l [-s]] [-q] [-u <upload-pack>] [--origin <name>] [-n] <repo> [<dir>]"
exit 1
}
local=no
use_local=no
local_shared=no
+unset template
no_checkout=
upload_pack=
bare=
*,-l|*,--l|*,--lo|*,--loc|*,--loca|*,--local) use_local=yes ;;
*,-s|*,--s|*,--sh|*,--sha|*,--shar|*,--share|*,--shared)
local_shared=yes; use_local=yes ;;
+ 1,--template) usage ;;
+ *,--template)
+ shift; template="--template=$1" ;;
+ *,--template=*)
+ template="$1" ;;
*,-q|*,--quiet) quiet=-q ;;
*,--use-separate-remote)
use_separate_remote=t ;;
case "$bare" in
yes) GIT_DIR="$D" ;;
*) GIT_DIR="$D/.git" ;;
-esac && export GIT_DIR && git-init-db || usage
+esac && export GIT_DIR && git-init-db ${template+"$template"} || usage
case "$bare" in
yes)
GIT_DIR="$D" ;;
if test -z "$no_edit"
then
{
+ echo ""
+ echo "# Please enter the commit message for your changes."
+ echo "# (Comment lines starting with '#' will not be included)"
test -z "$only_include_assumed" || echo "$only_include_assumed"
run_status
} >>"$GIT_DIR"/COMMIT_EDITMSG
#!/usr/bin/perl -w
+# Known limitations:
+# - cannot add or remove binary files
+# - does not propagate permissions
+# - tells "ready for commit" even when things could not be completed
+# (eg addition of a binary file)
+
use strict;
use Getopt::Std;
use File::Temp qw(tempdir);
use Data::Dumper;
-use File::Basename qw(basename);
+use File::Basename qw(basename dirname);
unless ($ENV{GIT_DIR} && -r $ENV{GIT_DIR}){
die "GIT_DIR is not defined or is unreadable";
`git-cat-file commit $commit | sed -e '1,/^\$/d' >> .msg`;
$? && die "Error extracting the commit message";
-my (@afiles, @dfiles, @mfiles);
+my (@afiles, @dfiles, @mfiles, @dirs);
my @files = safe_pipe_capture('git-diff-tree', '-r', $parent, $commit);
#print @files;
$? && die "Error in git-diff-tree";
chomp $f;
my @fields = split(m!\s+!, $f);
if ($fields[4] eq 'A') {
- push @afiles, $fields[5];
+ my $path = $fields[5];
+ push @afiles, $path;
+ # add any needed parent directories
+ $path = dirname $path;
+ while (!-d $path and ! grep { $_ eq $path } @dirs) {
+ unshift @dirs, $path;
+ $path = dirname $path;
+ }
}
if ($fields[4] eq 'M') {
push @mfiles, $fields[5];
# check that the files are clean and up to date according to cvs
my $dirty;
+foreach my $d (@dirs) {
+ if (-e $d) {
+ $dirty = 1;
+ warn "$d exists and is not a directory!\n";
+ }
+}
foreach my $f (@afiles) {
# This should return only one value
my @status = grep(m/^File/, safe_pipe_capture('cvs', '-q', 'status' ,$f));
if (@status > 1) { warn 'Strange! cvs status returned more than one line?'};
- unless ($status[0] =~ m/Status: Unknown$/) {
+ if (-d dirname $f and $status[0] !~ m/Status: Unknown$/
+ and $status[0] !~ m/^File: no file /) {
$dirty = 1;
warn "File $f is already known in your CVS checkout -- perhaps it has been added by another user. Or this may indicate that it exists on a different branch. If this is the case, use -f to force the merge.\n";
+ warn "Status was: $status\n";
}
}
foreach my $f (@mfiles, @dfiles) {
###
+print "Creating new directories\n";
+foreach my $d (@dirs) {
+ unless (mkdir $d) {
+ warn "Could not mkdir $d: $!";
+ $dirty = 1;
+ }
+ `cvs add $d`;
+ if ($?) {
+ $dirty = 1;
+ warn "Failed to cvs add directory $d -- you may need to do it manually";
+ }
+}
+
print "'Patching' binary files\n";
my @bfiles = grep(m/^Binary/, safe_pipe_capture('git-diff-tree', '-p', $parent, $commit));
my $blob = `git-ls-tree $tree "$f" | cut -f 1 | cut -d ' ' -f 3`;
chomp $blob;
`git-cat-file blob $blob > $tmpdir/blob`;
- if (system('cmp', '-q', $f, "$tmpdir/blob")) {
+ if (system('cmp', '-s', $f, "$tmpdir/blob")) {
warn "Binary file $f in CVS does not match parent.\n";
$dirty = 1;
next;
reflist=$(get_remote_refs_for_fetch "$@")
if test "$tags"
then
- taglist=$(IFS=" " &&
+ taglist=`IFS=" " &&
git-ls-remote $upload_pack --tags "$remote" |
while read sha1 name
do
case "$name" in
- (*^*) continue ;;
+ *^*) continue ;;
esac
if git-check-ref-format "$name"
then
else
echo >&2 "warning: tag ${name} ignored"
fi
- done)
+ done`
if test "$#" -gt 1
then
# remote URL plus explicit refspecs; we need to merge them.
my $compose_filename = ".msg.$$";
# Variables we fill in automatically, or via prompting:
-my (@to,@cc,@initial_cc,$initial_reply_to,$initial_subject,@files,$from,$compose,$time);
+my (@to,@cc,@initial_cc,@bcclist,
+ $initial_reply_to,$initial_subject,@files,$from,$compose,$time);
# Behavior modification variables
my ($chain_reply_to, $quiet, $suppress_from, $no_signed_off_cc) = (1, 0, 0, 0);
"subject=s" => \$initial_subject,
"to=s" => \@to,
"cc=s" => \@initial_cc,
+ "bcc=s" => \@bcclist,
"chain-reply-to!" => \$chain_reply_to,
"smtp-server=s" => \$smtp_server,
"compose" => \$compose,
@to = expand_aliases(@to);
@initial_cc = expand_aliases(@initial_cc);
+@bcclist = expand_aliases(@bcclist);
if (!defined $initial_subject && $compose) {
do {
--cc Specify an initial "Cc:" list for the entire series
of emails.
+ --bcc Specify a list of email addresses that should be Bcc:
+ on all the emails.
+
--compose Use \$EDITOR to edit an introductory message for the
patch series.
}
# Variables we set as part of the loop over files
-our ($message_id, $cc, %mail, $subject, $reply_to, $message);
+our ($message_id, $cc, %mail, $subject, $reply_to, $references, $message);
sub extract_valid_address {
my $address = shift;
} else {
# less robust/correct than the monster regexp in Email::Valid,
# but still does a 99% job, and one less dependency
- return ($address =~ /([^\"<>\s]+@[^<>\s]+)/);
+ my $cleaned_address;
+ if ($address =~ /([^\"<>\s]+@[^<>\s]+)/) {
+ $cleaned_address = $1;
+ }
+ return $cleaned_address;
}
}
{
my @recipients = unique_email_list(@to);
my $to = join (",\n\t", @recipients);
- @recipients = unique_email_list(@recipients,@cc);
+ @recipients = unique_email_list(@recipients,@cc,@bcclist);
my $date = strftime('%a, %d %b %Y %H:%M:%S %z', localtime($time++));
my $gitversion = '@@GIT_VERSION@@';
if ($gitversion =~ m/..GIT_VERSION../) {
Message-Id: $message_id
X-Mailer: git-send-email $gitversion
";
- $header .= "In-Reply-To: $reply_to\n" if $reply_to;
+ if ($reply_to) {
+
+ $header .= "In-Reply-To: $reply_to\n";
+ $header .= "References: $references\n";
+ }
if ($smtp_server =~ m#^/#) {
my $pid = open my $sm, '|-';
defined $pid or die $!;
if (!$pid) {
- exec($smtp_server,'-i',@recipients) or die $!;
+ exec($smtp_server,'-i',
+ map { scalar extract_valid_address($_) }
+ @recipients) or die $!;
}
print $sm "$header\n$message";
close $sm or die $?;
}
$reply_to = $initial_reply_to;
+$references = $initial_reply_to || '';
make_message_id();
$subject = $initial_subject;
# set up for the next message
if ($chain_reply_to || length($reply_to) == 0) {
$reply_to = $message_id;
+ if (length $references > 0) {
+ $references .= " $message_id";
+ } else {
+ $references = "$message_id";
+ }
}
make_message_id();
}
return 1;
}
-static int handle_from(char *line)
+static int handle_from(char *in_line)
{
- char *at = strchr(line, '@');
+ char line[1000];
+ char *at;
char *dst;
+ strcpy(line, in_line);
+ at = strchr(line, '@');
if (!at)
return bogus_from(line);
#define SEEN_FROM 01
#define SEEN_DATE 02
#define SEEN_SUBJECT 04
+#define SEEN_BOGUS_UNIX_FROM 010
+#define SEEN_PREFIX 020
/* First lines of body can have From:, Date:, and Subject: */
-static int handle_inbody_header(int *seen, char *line)
+static void handle_inbody_header(int *seen, char *line)
{
+ if (!memcmp(">From", line, 5) && isspace(line[5])) {
+ if (!(*seen & SEEN_BOGUS_UNIX_FROM)) {
+ *seen |= SEEN_BOGUS_UNIX_FROM;
+ return;
+ }
+ }
if (!memcmp("From:", line, 5) && isspace(line[5])) {
if (!(*seen & SEEN_FROM) && handle_from(line+6)) {
*seen |= SEEN_FROM;
- return 1;
+ return;
}
}
if (!memcmp("Date:", line, 5) && isspace(line[5])) {
if (!(*seen & SEEN_DATE)) {
handle_date(line+6);
*seen |= SEEN_DATE;
- return 1;
+ return;
}
}
if (!memcmp("Subject:", line, 8) && isspace(line[8])) {
if (!(*seen & SEEN_SUBJECT)) {
handle_subject(line+9);
*seen |= SEEN_SUBJECT;
- return 1;
+ return;
}
}
if (!memcmp("[PATCH]", line, 7) && isspace(line[7])) {
if (!(*seen & SEEN_SUBJECT)) {
handle_subject(line);
*seen |= SEEN_SUBJECT;
- return 1;
+ return;
}
}
- return 0;
+ *seen |= SEEN_PREFIX;
}
static char *cleanup_subject(char *subject)
}
}
+static void decode_header_bq(char *it);
typedef int (*header_fn_t)(char *);
struct header_def {
const char *name;
int namelen;
};
-static void check_header(char *line, int len, struct header_def *header)
+static void check_header(char *line, struct header_def *header)
{
int i;
int len = header[i].namelen;
if (!strncasecmp(line, header[i].name, len) &&
line[len] == ':' && isspace(line[len + 1])) {
+ /* Unwrap inline B and Q encoding, and optionally
+ * normalize the meta information to utf8.
+ */
+ decode_header_bq(line + len + 2);
header[i].func(line + len + 2);
break;
}
}
}
-static void check_subheader_line(char *line, int len)
+static void check_subheader_line(char *line)
{
static struct header_def header[] = {
{ "Content-Type", handle_subcontent_type },
handle_content_transfer_encoding },
{ NULL },
};
- check_header(line, len, header);
+ check_header(line, header);
}
-static void check_header_line(char *line, int len)
+static void check_header_line(char *line)
{
static struct header_def header[] = {
{ "From", handle_from },
handle_content_transfer_encoding },
{ NULL },
};
- check_header(line, len, header);
+ check_header(line, header);
+}
+
+static int is_rfc2822_header(char *line)
+{
+ /*
+ * The section that defines the loosest possible
+ * field name is "3.6.8 Optional fields".
+ *
+ * optional-field = field-name ":" unstructured CRLF
+ * field-name = 1*ftext
+ * ftext = %d33-57 / %59-126
+ */
+ int ch;
+ char *cp = line;
+ while ((ch = *cp++)) {
+ if (ch == ':')
+ return cp != line;
+ if ((33 <= ch && ch <= 57) ||
+ (59 <= ch && ch <= 126))
+ continue;
+ break;
+ }
+ return 0;
}
static int read_one_header_line(char *line, int sz, FILE *in)
while (ofs < sz) {
int peek, len;
if (fgets(line + ofs, sz - ofs, in) == NULL)
- return ofs;
+ break;
len = eatspace(line + ofs);
if (len == 0)
- return ofs;
- peek = fgetc(in); ungetc(peek, in);
- if (peek == ' ' || peek == '\t') {
- /* Yuck, 2822 header "folding" */
- ofs += len;
- continue;
+ break;
+ if (!is_rfc2822_header(line)) {
+ /* Re-add the newline */
+ line[ofs + len] = '\n';
+ line[ofs + len + 1] = '\0';
+ break;
}
- return ofs + len;
+ ofs += len;
+ /* Yuck, 2822 header "folding" */
+ peek = fgetc(in); ungetc(peek, in);
+ if (peek != ' ' && peek != '\t')
+ break;
}
+ /* Count mbox From headers as headers */
+ if (!ofs && !memcmp(line, "From ", 5))
+ ofs = 1;
return ofs;
}
static void handle_info(void)
{
char *sub;
- static int done_info = 0;
-
- if (done_info)
- return;
- done_info = 1;
sub = cleanup_subject(subject);
cleanup_space(name);
cleanup_space(date);
cleanup_space(email);
cleanup_space(sub);
- /* Unwrap inline B and Q encoding, and optionally
- * normalize the meta information to utf8.
- */
- decode_header_bq(name);
- decode_header_bq(date);
- decode_header_bq(email);
- decode_header_bq(sub);
printf("Author: %s\nEmail: %s\nSubject: %s\nDate: %s\n\n",
name, email, sub, date);
}
/* We are inside message body and have read line[] already.
* Spit out the commit log.
*/
-static int handle_commit_msg(void)
+static int handle_commit_msg(int *seen)
{
if (!cmitmsg)
return 0;
decode_transfer_encoding(line);
if (metainfo_charset)
convert_to_utf8(line, charset);
+
+ handle_inbody_header(seen, line);
+ if (!(*seen & SEEN_PREFIX))
+ continue;
+
fputs(line, cmitmsg);
} while (fgets(line, sizeof(line), stdin) != NULL);
fclose(cmitmsg);
* that the first part to contain commit message and a patch, and
* handle other parts as pure patches.
*/
-static int handle_multipart_one_part(void)
+static int handle_multipart_one_part(int *seen)
{
- int seen = 0;
int n = 0;
- int len;
while (fgets(line, sizeof(line), stdin) != NULL) {
again:
- len = eatspace(line);
n++;
- if (!len)
- continue;
if (is_multipart_boundary(line))
break;
- if (0 <= seen && handle_inbody_header(&seen, line))
- continue;
- seen = -1; /* no more inbody headers */
- line[len] = '\n';
- handle_info();
- if (handle_commit_msg())
+ if (handle_commit_msg(seen))
goto again;
handle_patch();
break;
static void handle_multipart_body(void)
{
+ int seen = 0;
int part_num = 0;
/* Skip up to the first boundary */
return;
/* We are on boundary line. Start slurping the subhead. */
while (1) {
- int len = read_one_header_line(line, sizeof(line), stdin);
- if (!len) {
- if (handle_multipart_one_part() < 0)
+ int hdr = read_one_header_line(line, sizeof(line), stdin);
+ if (!hdr) {
+ if (handle_multipart_one_part(&seen) < 0)
return;
/* Reset per part headers */
transfer_encoding = TE_DONTCARE;
charset[0] = 0;
}
else
- check_subheader_line(line, len);
+ check_subheader_line(line);
}
fclose(patchfile);
if (!patch_lines) {
{
int seen = 0;
- while (fgets(line, sizeof(line), stdin) != NULL) {
- int len = eatspace(line);
- if (!len)
- continue;
- if (0 <= seen && handle_inbody_header(&seen, line))
- continue;
- seen = -1; /* no more inbody headers */
- line[len] = '\n';
- handle_info();
- handle_commit_msg();
+ if (line[0] || fgets(line, sizeof(line), stdin) != NULL) {
+ handle_commit_msg(&seen);
handle_patch();
- break;
}
fclose(patchfile);
if (!patch_lines) {
exit(1);
}
while (1) {
- int len = read_one_header_line(line, sizeof(line), stdin);
- if (!len) {
+ int hdr = read_one_header_line(line, sizeof(line), stdin);
+ if (!hdr) {
if (multipart_boundary[0])
handle_multipart_body();
else
handle_body();
+ handle_info();
break;
}
- check_header_line(line, len);
+ check_header_line(line);
}
return 0;
}
* Copyright (C) Linus Torvalds, 2005
*/
#include "cache.h"
+#include "cache-tree.h"
+
+/* Index extensions.
+ *
+ * The first letter should be 'A'..'Z' for extensions that are not
+ * necessary for a correct operation (i.e. optimization data).
+ * When new extensions are added that _needs_ to be understood in
+ * order to correctly interpret the index file, pick character that
+ * is outside the range, to cause the reader to abort.
+ */
+
+#define CACHE_EXT(s) ( (s[0]<<24)|(s[1]<<16)|(s[2]<<8)|(s[3]) )
+#define CACHE_EXT_TREE 0x54524545 /* "TREE" */
struct cache_entry **active_cache = NULL;
static time_t index_file_timestamp;
unsigned int active_nr = 0, active_alloc = 0, active_cache_changed = 0;
+struct cache_tree *active_cache_tree = NULL;
+
/*
* This only updates the "non-critical" parts of the directory
* cache, ie the parts that aren't tracked by GIT, and only used
return 0;
}
+static int read_index_extension(const char *ext, void *data, unsigned long sz)
+{
+ switch (CACHE_EXT(ext)) {
+ case CACHE_EXT_TREE:
+ active_cache_tree = cache_tree_read(data, sz);
+ break;
+ default:
+ if (*ext < 'A' || 'Z' < *ext)
+ return error("index uses %.4s extension, which we do not understand",
+ ext);
+ fprintf(stderr, "ignoring %.4s extension\n", ext);
+ break;
+ }
+ return 0;
+}
+
int read_cache(void)
{
int fd, i;
active_cache[i] = ce;
}
index_file_timestamp = st.st_mtime;
+ while (offset <= size - 20 - 8) {
+ /* After an array of active_nr index entries,
+ * there can be arbitrary number of extended
+ * sections, each of which is prefixed with
+ * extension name (4-byte) and section length
+ * in 4-byte network byte order.
+ */
+ unsigned long extsize;
+ memcpy(&extsize, map + offset + 4, 4);
+ extsize = ntohl(extsize);
+ if (read_index_extension(map + offset,
+ map + offset + 8, extsize) < 0)
+ goto unmap;
+ offset += 8;
+ offset += extsize;
+ }
return active_nr;
unmap:
return 0;
}
+static int write_index_ext_header(SHA_CTX *context, int fd,
+ unsigned int ext, unsigned int sz)
+{
+ ext = htonl(ext);
+ sz = htonl(sz);
+ if ((ce_write(context, fd, &ext, 4) < 0) ||
+ (ce_write(context, fd, &sz, 4) < 0))
+ return -1;
+ return 0;
+}
+
static int ce_flush(SHA_CTX *context, int fd)
{
unsigned int left = write_buffer_len;
if (ce_write(&c, newfd, ce, ce_size(ce)) < 0)
return -1;
}
+
+ /* Write extension data here */
+ if (active_cache_tree) {
+ unsigned long sz;
+ void *data = cache_tree_write(active_cache_tree, &sz);
+ if (data &&
+ !write_index_ext_header(&c, newfd, CACHE_EXT_TREE, sz) &&
+ !ce_write(&c, newfd, data, sz))
+ ;
+ else {
+ free(data);
+ return -1;
+ }
+ }
return ce_flush(&c, newfd);
}
revs->abbrev = DEFAULT_ABBREV;
continue;
}
+ if (!strncmp(arg, "--abbrev=", 9)) {
+ revs->abbrev = strtoul(arg + 9, NULL, 10);
+ if (revs->abbrev < MINIMUM_ABBREV)
+ revs->abbrev = MINIMUM_ABBREV;
+ else if (revs->abbrev > 40)
+ revs->abbrev = 40;
+ continue;
+ }
if (!strcmp(arg, "--abbrev-commit")) {
revs->abbrev_commit = 1;
continue;
git-update-index --add yomin &&
git-read-tree -m -u $treeH $treeM &&
git-ls-files --stage >4.out || return 1
- diff --unified=0 M.out 4.out >4diff.out
+ diff -U0 M.out 4.out >4diff.out
compare_change 4diff.out expected &&
check_cache_at yomin clean &&
sum bozbar frotz nitfol >actual4.sum &&
echo yomin yomin >yomin &&
git-read-tree -m -u $treeH $treeM &&
git-ls-files --stage >5.out || return 1
- diff --unified=0 M.out 5.out >5diff.out
+ diff -U0 M.out 5.out >5diff.out
compare_change 5diff.out expected &&
check_cache_at yomin dirty &&
sum bozbar frotz nitfol >actual5.sum &&
git-update-index --add frotz &&
git-read-tree -m -u $treeH $treeM &&
git-ls-files --stage >6.out &&
- diff --unified=0 M.out 6.out &&
+ diff -U0 M.out 6.out &&
check_cache_at frotz clean &&
sum bozbar frotz nitfol >actual3.sum &&
cmp M.sum actual3.sum &&
echo frotz frotz >frotz &&
git-read-tree -m -u $treeH $treeM &&
git-ls-files --stage >7.out &&
- diff --unified=0 M.out 7.out &&
+ diff -U0 M.out 7.out &&
check_cache_at frotz dirty &&
sum bozbar frotz nitfol >actual7.sum &&
if cmp M.sum actual7.sum; then false; else :; fi &&
git-update-index --add nitfol &&
git-read-tree -m -u $treeH $treeM &&
git-ls-files --stage >14.out || return 1
- diff --unified=0 M.out 14.out >14diff.out
+ diff -U0 M.out 14.out >14diff.out
compare_change 14diff.out expected &&
sum bozbar frotz >actual14.sum &&
grep -v nitfol M.sum > expected14.sum &&
echo nitfol nitfol nitfol >nitfol &&
git-read-tree -m -u $treeH $treeM &&
git-ls-files --stage >15.out || return 1
- diff --unified=0 M.out 15.out >15diff.out
+ diff -U0 M.out 15.out >15diff.out
compare_change 15diff.out expected &&
check_cache_at nitfol dirty &&
sum bozbar frotz >actual15.sum &&
git-update-index --add bozbar &&
git-read-tree -m -u $treeH $treeM &&
git-ls-files --stage >18.out &&
- diff --unified=0 M.out 18.out &&
+ diff -U0 M.out 18.out &&
check_cache_at bozbar clean &&
sum bozbar frotz nitfol >actual18.sum &&
cmp M.sum actual18.sum'
echo gnusto gnusto >bozbar &&
git-read-tree -m -u $treeH $treeM &&
git-ls-files --stage >19.out &&
- diff --unified=0 M.out 19.out &&
+ diff -U0 M.out 19.out &&
check_cache_at bozbar dirty &&
sum frotz nitfol >actual19.sum &&
grep -v bozbar M.sum > expected19.sum &&
git-update-index --add bozbar &&
git-read-tree -m -u $treeH $treeM &&
git-ls-files --stage >20.out &&
- diff --unified=0 M.out 20.out &&
+ diff -U0 M.out 20.out &&
check_cache_at bozbar clean &&
sum bozbar frotz nitfol >actual20.sum &&
cmp M.sum actual20.sum'
git-update-index --add DF &&
git-read-tree -m -u $treeDF $treeDFDF &&
git-ls-files --stage >DFDFcheck.out &&
- diff --unified=0 DFDF.out DFDFcheck.out &&
+ diff -U0 DFDF.out DFDFcheck.out &&
check_cache_at DF/DF clean'
test_done
. ./test-lib.sh
# Setup some files to be removed, some with funny characters
-touch -- foo bar baz 'space embedded' -q
-git-add -- foo bar baz 'space embedded' -q
-git-commit -m "add normal files"
-test_tabs=y
-if touch -- 'tab embedded' 'newline
-embedded'
-then
-git-add -- 'tab embedded' 'newline
+test_expect_success \
+ 'Initialize test directory' \
+ "touch -- foo bar baz 'space embedded' -q &&
+ git-add -- foo bar baz 'space embedded' -q &&
+ git-commit -m 'add normal files' &&
+ test_tabs=y &&
+ if touch -- 'tab embedded' 'newline
embedded'
-git-commit -m "add files with tabs and newlines"
-else
- say 'Your filesystem does not allow tabs in filenames.'
- test_tabs=n
-fi
+ then
+ git-add -- 'tab embedded' 'newline
+embedded' &&
+ git-commit -m 'add files with tabs and newlines'
+ else
+ say 'Your filesystem does not allow tabs in filenames.'
+ test_tabs=n
+ fi"
# Later we will try removing an unremovable path to make sure
# git-rm barfs, but if the test is run as root that cannot be
# arranged.
-: >test-file
-chmod a-w .
-rm -f test-file
-test -f test-file && test_failed_remove=y
-chmod 775 .
-rm -f test-file
+test_expect_success \
+ 'Determine rm behavior' \
+ ': >test-file
+ chmod a-w .
+ rm -f test-file
+ test -f test-file && test_failed_remove=y
+ chmod 775 .
+ rm -f test-file'
test_expect_success \
'Pre-check that foo exists and is in index before git-rm foo' \
--- /dev/null
+#!/bin/sh
+#
+# Copyright (c) 2006 Catalin Marinas
+#
+
+test_description='git-apply trying to add an ending line.
+
+'
+. ./test-lib.sh
+
+# setup
+
+cat >test-patch <<\EOF
+diff --git a/file b/file
+--- a/file
++++ b/file
+@@ -1,2 +1,3 @@
+ a
+ b
++c
+EOF
+
+echo 'a' >file
+echo 'b' >>file
+echo 'c' >>file
+
+test_expect_success setup \
+ 'git-update-index --add file'
+
+# test
+
+test_expect_failure 'apply at the end' \
+ 'git-apply --index test-patch'
+
+cat >test-patch <<\EOF
+diff a/file b/file
+--- a/file
++++ b/file
+@@ -1,2 +1,3 @@
++a
+ b
+ c
+EOF
+
+echo >file 'a
+b
+c'
+git-update-index file
+
+test_expect_failure 'apply at the beginning' \
+ 'git-apply --index test-patch'
+
+test_done
--- /dev/null
+#!/bin/sh
+
+test_description='git-send-email'
+. ./test-lib.sh
+
+PROG='git send-email'
+test_expect_success \
+ 'prepare reference tree' \
+ 'echo "1A quick brown fox jumps over the" >file &&
+ echo "lazy dog" >>file &&
+ git add file
+ GIT_AUTHOR_NAME="A" git commit -a -m "Initial."'
+
+test_expect_success \
+ 'Setup helper tool' \
+ '(echo "#!/bin/sh"
+ echo shift
+ echo for a
+ echo do
+ echo " echo \"!\$a!\""
+ echo "done >commandline"
+ echo "cat > msgtxt"
+ ) >fake.sendmail
+ chmod +x ./fake.sendmail
+ git add fake.sendmail
+ GIT_AUTHOR_NAME="A" git commit -a -m "Second."'
+
+test_expect_success \
+ 'Extract patches and send' \
+ 'git format-patch -n HEAD^1
+ git send-email -from="Example <nobody@example.com>" --to=nobody@example.com --smtp-server="$(pwd)/fake.sendmail" ./0001*txt'
+
+cat >expected <<\EOF
+!nobody@example.com!
+!author@example.com!
+EOF
+test_expect_success \
+ 'Verify commandline' \
+ 'diff commandline expected'
+
+test_done
desc->size = size - len;
}
+static const char *get_mode(const char *str, unsigned int *modep)
+{
+ unsigned char c;
+ unsigned int mode = 0;
+
+ while ((c = *str++) != ' ') {
+ if (c < '0' || c > '7')
+ return NULL;
+ mode = (mode << 3) + (c - '0');
+ }
+ *modep = mode;
+ return str;
+}
+
const unsigned char *tree_entry_extract(struct tree_desc *desc, const char **pathp, unsigned int *modep)
{
void *tree = desc->buf;
unsigned long size = desc->size;
int len = strlen(tree)+1;
const unsigned char *sha1 = tree + len;
- const char *path = strchr(tree, ' ');
+ const char *path;
unsigned int mode;
- if (!path || size < len + 20 || sscanf(tree, "%o", &mode) != 1)
+ path = get_mode(tree, &mode);
+ if (!path || size < len + 20)
die("corrupt tree file");
- *pathp = path+1;
+ *pathp = path;
*modep = canon_mode(mode);
return sha1;
}
#include "cache.h"
#include "strbuf.h"
#include "quote.h"
+#include "cache-tree.h"
#include "tree-walk.h"
/*
active_cache[pos]->ce_flags &= ~htons(CE_VALID);
break;
}
+ cache_tree_invalidate_path(active_cache_tree, path);
active_cache_changed = 1;
return 0;
}
struct stat st;
status = lstat(path, &st);
+
+ /* We probably want to do this in remove_file_from_cache() and
+ * add_cache_entry() instead...
+ */
+ cache_tree_invalidate_path(active_cache_tree, path);
+
if (status < 0 || S_ISDIR(st.st_mode)) {
/* When we used to have "path" and now we want to add
* "path/file", we need a way to remove "path" before
return error("%s: cannot add to the index - missing --add option?",
path);
report("add '%s'", path);
+ cache_tree_invalidate_path(active_cache_tree, path);
return 0;
}
default:
goto fail;
}
+ cache_tree_invalidate_path(active_cache_tree, path);
active_cache_changed = 1;
report("chmod %cx '%s'", flip, path);
return;
die("Unable to mark file %s", path);
goto free_return;
}
+ cache_tree_invalidate_path(active_cache_tree, path);
if (force_remove) {
if (remove_file_from_cache(p))
free(path_name);
continue;
}
+ cache_tree_invalidate_path(active_cache_tree, path_name);
if (!mode) {
/* mode == 0 means there is no such path -- remove */
goto free_return;
}
+ cache_tree_invalidate_path(active_cache_tree, path);
remove_file_from_cache(path);
if (add_cache_entry(ce_2, ADD_CACHE_OK_TO_ADD)) {
error("%s: cannot add our version to the index.", path);
*/
#include "cache.h"
#include "tree.h"
+#include "cache-tree.h"
static int missing_ok = 0;
-static int check_valid_sha1(unsigned char *sha1)
-{
- int ret;
-
- /* If we were anal, we'd check that the sha1 of the contents actually matches */
- ret = has_sha1_file(sha1);
- if (ret == 0)
- perror(sha1_file_name(sha1));
- return ret ? 0 : -1;
-}
-
-static int write_tree(struct cache_entry **cachep, int maxentries, const char *base, int baselen, unsigned char *returnsha1)
-{
- unsigned char subdir_sha1[20];
- unsigned long size, offset;
- char *buffer;
- int nr;
-
- /* Guess at some random initial size */
- size = 8192;
- buffer = xmalloc(size);
- offset = 0;
-
- nr = 0;
- while (nr < maxentries) {
- struct cache_entry *ce = cachep[nr];
- const char *pathname = ce->name, *filename, *dirname;
- int pathlen = ce_namelen(ce), entrylen;
- unsigned char *sha1;
- unsigned int mode;
-
- /* Did we hit the end of the directory? Return how many we wrote */
- if (baselen >= pathlen || memcmp(base, pathname, baselen))
- break;
-
- sha1 = ce->sha1;
- mode = ntohl(ce->ce_mode);
-
- /* Do we have _further_ subdirectories? */
- filename = pathname + baselen;
- dirname = strchr(filename, '/');
- if (dirname) {
- int subdir_written;
-
- subdir_written = write_tree(cachep + nr, maxentries - nr, pathname, dirname-pathname+1, subdir_sha1);
- nr += subdir_written;
-
- /* Now we need to write out the directory entry into this tree.. */
- mode = S_IFDIR;
- pathlen = dirname - pathname;
-
- /* ..but the directory entry doesn't count towards the total count */
- nr--;
- sha1 = subdir_sha1;
- }
-
- if (!missing_ok && check_valid_sha1(sha1) < 0)
- exit(1);
-
- entrylen = pathlen - baselen;
- if (offset + entrylen + 100 > size) {
- size = alloc_nr(offset + entrylen + 100);
- buffer = xrealloc(buffer, size);
- }
- offset += sprintf(buffer + offset, "%o %.*s", mode, entrylen, filename);
- buffer[offset++] = 0;
- memcpy(buffer + offset, sha1, 20);
- offset += 20;
- nr++;
- }
-
- write_sha1_file(buffer, offset, tree_type, returnsha1);
- free(buffer);
- return nr;
-}
-
static const char write_tree_usage[] = "git-write-tree [--missing-ok]";
+static struct cache_file cache_file;
+
int main(int argc, char **argv)
{
- int i, funny;
- int entries;
- unsigned char sha1[20];
-
+ int entries, was_valid, newfd;
+
setup_git_directory();
+ newfd = hold_index_file_for_update(&cache_file, get_index_file());
entries = read_cache();
if (argc == 2) {
if (!strcmp(argv[1], "--missing-ok"))
if (entries < 0)
die("git-write-tree: error reading cache");
- /* Verify that the tree is merged */
- funny = 0;
- for (i = 0; i < entries; i++) {
- struct cache_entry *ce = active_cache[i];
- if (ce_stage(ce)) {
- if (10 < ++funny) {
- fprintf(stderr, "...\n");
- break;
- }
- fprintf(stderr, "%s: unmerged (%s)\n", ce->name, sha1_to_hex(ce->sha1));
+ if (!active_cache_tree)
+ active_cache_tree = cache_tree();
+
+ was_valid = cache_tree_fully_valid(active_cache_tree);
+ if (!was_valid) {
+ if (cache_tree_update(active_cache_tree,
+ active_cache, active_nr,
+ missing_ok, 0) < 0)
+ die("git-write-tree: error building trees");
+ if (0 <= newfd) {
+ if (!write_cache(newfd, active_cache, active_nr))
+ commit_index_file(&cache_file);
}
- }
- if (funny)
- die("git-write-tree: not able to write tree");
-
- /* Also verify that the cache does not have path and path/file
- * at the same time. At this point we know the cache has only
- * stage 0 entries.
- */
- funny = 0;
- for (i = 0; i < entries - 1; i++) {
- /* path/file always comes after path because of the way
- * the cache is sorted. Also path can appear only once,
- * which means conflicting one would immediately follow.
+ /* Not being able to write is fine -- we are only interested
+ * in updating the cache-tree part, and if the next caller
+ * ends up using the old index with unupdated cache-tree part
+ * it misses the work we did here, but that is just a
+ * performance penalty and not a big deal.
*/
- const char *this_name = active_cache[i]->name;
- const char *next_name = active_cache[i+1]->name;
- int this_len = strlen(this_name);
- if (this_len < strlen(next_name) &&
- strncmp(this_name, next_name, this_len) == 0 &&
- next_name[this_len] == '/') {
- if (10 < ++funny) {
- fprintf(stderr, "...\n");
- break;
- }
- fprintf(stderr, "You have both %s and %s\n",
- this_name, next_name);
- }
}
- if (funny)
- die("git-write-tree: not able to write tree");
-
- /* Ok, write it out */
- if (write_tree(active_cache, entries, "", 0, sha1) != entries)
- die("git-write-tree: internal error");
- printf("%s\n", sha1_to_hex(sha1));
+ printf("%s\n", sha1_to_hex(active_cache_tree->sha1));
return 0;
}