+++ /dev/null
-
- ChangeLog file for zlib
-
-Changes in 1.1.3 (9 July 1998)
-- fix "an inflate input buffer bug that shows up on rare but persistent
- occasions" (Mark)
-- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
-- fix gzseek(..., SEEK_SET) in write mode
-- fix crc check after a gzeek (Frank Faubert)
-- fix miniunzip when the last entry in a zip file is itself a zip file
- (J Lillge)
-- add contrib/asm586 and contrib/asm686 (Brian Raiter)
- See http://www.muppetlabs.com/~breadbox/software/assembly.html
-- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
-- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
-- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
-- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
-- added a FAQ file
-
-- Support gzdopen on Mac with Metrowerks (Jason Linhart)
-- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
-- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
-- avoid some warnings with Borland C (Tom Tanner)
-- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
-- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant)
-- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
-- use libdir and includedir in Makefile.in (Tim Mooney)
-- support shared libraries on OSF1 V4 (Tim Mooney)
-- remove so_locations in "make clean" (Tim Mooney)
-- fix maketree.c compilation error (Glenn, Mark)
-- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
-- new Makefile.riscos (Rich Walker)
-- initialize static descriptors in trees.c for embedded targets (Nick Smith)
-- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
-- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
-- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
-- fix maketree.c to allow clean compilation of inffixed.h (Mark)
-- fix parameter check in deflateCopy (Gunther Nikl)
-- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
-- Many portability patches by Christian Spieler:
- . zutil.c, zutil.h: added "const" for zmem*
- . Make_vms.com: fixed some typos
- . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
- . msdos/Makefile.msc: remove "default rtl link library" info from obj files
- . msdos/Makefile.*: use model-dependent name for the built zlib library
- . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
- new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
-- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
-- replace __far with _far for better portability (Christian Spieler, Tom Lane)
-- fix test for errno.h in configure (Tim Newsham)
-
-Changes in 1.1.2 (19 March 98)
-- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
- See http://www.winimage.com/zLibDll/unzip.html
-- preinitialize the inflate tables for fixed codes, to make the code
- completely thread safe (Mark)
-- some simplifications and slight speed-up to the inflate code (Mark)
-- fix gzeof on non-compressed files (Allan Schrum)
-- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
-- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
-- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
-- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
-- do not wrap extern "C" around system includes (Tom Lane)
-- mention zlib binding for TCL in README (Andreas Kupries)
-- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
-- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
-- allow "configure --prefix $HOME" (Tim Mooney)
-- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
-- move Makefile.sas to amiga/Makefile.sas
-
-Changes in 1.1.1 (27 Feb 98)
-- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson)
-- remove block truncation heuristic which had very marginal effect for zlib
- (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
- compression ratio on some files. This also allows inlining _tr_tally for
- matches in deflate_slow.
-- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
-
-Changes in 1.1.0 (24 Feb 98)
-- do not return STREAM_END prematurely in inflate (John Bowler)
-- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
-- compile with -DFASTEST to get compression code optimized for speed only
-- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
-- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
- on Sun but significant on HP)
-
-- add a pointer to experimental unzip library in README (Gilles Vollant)
-- initialize variable gcc in configure (Chris Herborth)
-
-Changes in 1.0.9 (17 Feb 1998)
-- added gzputs and gzgets functions
-- do not clear eof flag in gzseek (Mark Diekhans)
-- fix gzseek for files in transparent mode (Mark Diekhans)
-- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
-- replace EXPORT with ZEXPORT to avoid conflict with other programs
-- added compress2 in zconf.h, zlib.def, zlib.dnt
-- new asm code from Gilles Vollant in contrib/asm386
-- simplify the inflate code (Mark):
- . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
- . ZALLOC the length list in inflate_trees_fixed() instead of using stack
- . ZALLOC the value area for huft_build() instead of using stack
- . Simplify Z_FINISH check in inflate()
-
-- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
-- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
-- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
- the declaration of FAR (Gilles VOllant)
-- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
-- read_buf buf parameter of type Bytef* instead of charf*
-- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
-- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
-- fix check for presence of directories in "make install" (Ian Willis)
-
-Changes in 1.0.8 (27 Jan 1998)
-- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
-- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
-- added compress2() to allow setting the compression level
-- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
-- use constant arrays for the static trees in trees.c instead of computing
- them at run time (thanks to Ken Raeburn for this suggestion). To create
- trees.h, compile with GEN_TREES_H and run "make test".
-- check return code of example in "make test" and display result
-- pass minigzip command line options to file_compress
-- simplifying code of inflateSync to avoid gcc 2.8 bug
-
-- support CC="gcc -Wall" in configure -s (QingLong)
-- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
-- fix test for shared library support to avoid compiler warnings
-- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
-- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
-- do not use fdopen for Metrowerks on Mac (Brad Pettit))
-- add checks for gzputc and gzputc in example.c
-- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
-- use const for the CRC table (Ken Raeburn)
-- fixed "make uninstall" for shared libraries
-- use Tracev instead of Trace in infblock.c
-- in example.c use correct compressed length for test_sync
-- suppress +vnocompatwarnings in configure for HPUX (not always supported)
-
-Changes in 1.0.7 (20 Jan 1998)
-- fix gzseek which was broken in write mode
-- return error for gzseek to negative absolute position
-- fix configure for Linux (Chun-Chung Chen)
-- increase stack space for MSC (Tim Wegner)
-- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
-- define EXPORTVA for gzprintf (Gilles Vollant)
-- added man page zlib.3 (Rick Rodgers)
-- for contrib/untgz, fix makedir() and improve Makefile
-
-- check gzseek in write mode in example.c
-- allocate extra buffer for seeks only if gzseek is actually called
-- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
-- add inflateSyncPoint in zconf.h
-- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
-
-Changes in 1.0.6 (19 Jan 1998)
-- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
- gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
-- Fix a deflate bug occuring only with compression level 0 (thanks to
- Andy Buckler for finding this one).
-- In minigzip, pass transparently also the first byte for .Z files.
-- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
-- check Z_FINISH in inflate (thanks to Marc Schluper)
-- Implement deflateCopy (thanks to Adam Costello)
-- make static libraries by default in configure, add --shared option.
-- move MSDOS or Windows specific files to directory msdos
-- suppress the notion of partial flush to simplify the interface
- (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
-- suppress history buffer provided by application to simplify the interface
- (this feature was not implemented anyway in 1.0.4)
-- next_in and avail_in must be initialized before calling inflateInit or
- inflateInit2
-- add EXPORT in all exported functions (for Windows DLL)
-- added Makefile.nt (thanks to Stephen Williams)
-- added the unsupported "contrib" directory:
- contrib/asm386/ by Gilles Vollant <info@winimage.com>
- 386 asm code replacing longest_match().
- contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
- A C++ I/O streams interface to the zlib gz* functions
- contrib/iostream2/ by Tyge LΓΈvset <Tyge.Lovset@cmr.no>
- Another C++ I/O streams interface
- contrib/untgz/ by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
- A very simple tar.gz file extractor using zlib
- contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
- How to use compress(), uncompress() and the gz* functions from VB.
-- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
- level) in minigzip (thanks to Tom Lane)
-
-- use const for rommable constants in deflate
-- added test for gzseek and gztell in example.c
-- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
-- add undocumented function zError to convert error code to string
- (for Tim Smithers)
-- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
-- Use default memcpy for Symantec MSDOS compiler.
-- Add EXPORT keyword for check_func (needed for Windows DLL)
-- add current directory to LD_LIBRARY_PATH for "make test"
-- create also a link for libz.so.1
-- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
-- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
-- added -soname for Linux in configure (Chun-Chung Chen,
-- assign numbers to the exported functions in zlib.def (for Windows DLL)
-- add advice in zlib.h for best usage of deflateSetDictionary
-- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
-- allow compilation with ANSI keywords only enabled for TurboC in large model
-- avoid "versionString"[0] (Borland bug)
-- add NEED_DUMMY_RETURN for Borland
-- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
-- allow compilation with CC
-- defined STDC for OS/2 (David Charlap)
-- limit external names to 8 chars for MVS (Thomas Lund)
-- in minigzip.c, use static buffers only for 16-bit systems
-- fix suffix check for "minigzip -d foo.gz"
-- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
-- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
-- added makelcc.bat for lcc-win32 (Tom St Denis)
-- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
-- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
-- check for unistd.h in configure (for off_t)
-- remove useless check parameter in inflate_blocks_free
-- avoid useless assignment of s->check to itself in inflate_blocks_new
-- do not flush twice in gzclose (thanks to Ken Raeburn)
-- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
-- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
-- work around buggy fclose on pipes for HP/UX
-- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
-- fix configure if CC is already equal to gcc
-
-Changes in 1.0.5 (3 Jan 98)
-- Fix inflate to terminate gracefully when fed corrupted or invalid data
-- Use const for rommable constants in inflate
-- Eliminate memory leaks on error conditions in inflate
-- Removed some vestigial code in inflate
-- Update web address in README
-
-Changes in 1.0.4 (24 Jul 96)
-- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
- bit, so the decompressor could decompress all the correct data but went
- on to attempt decompressing extra garbage data. This affected minigzip too.
-- zlibVersion and gzerror return const char* (needed for DLL)
-- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
-- use z_error only for DEBUG (avoid problem with DLLs)
-
-Changes in 1.0.3 (2 Jul 96)
-- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
- small and medium models; this makes the library incompatible with previous
- versions for these models. (No effect in large model or on other systems.)
-- return OK instead of BUF_ERROR if previous deflate call returned with
- avail_out as zero but there is nothing to do
-- added memcmp for non STDC compilers
-- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
-- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
-- better check for 16-bit mode MSC (avoids problem with Symantec)
-
-Changes in 1.0.2 (23 May 96)
-- added Windows DLL support
-- added a function zlibVersion (for the DLL support)
-- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
-- Bytef is define's instead of typedef'd only for Borland C
-- avoid reading uninitialized memory in example.c
-- mention in README that the zlib format is now RFC1950
-- updated Makefile.dj2
-- added algorithm.doc
-
-Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
-- fix array overlay in deflate.c which sometimes caused bad compressed data
-- fix inflate bug with empty stored block
-- fix MSDOS medium model which was broken in 0.99
-- fix deflateParams() which could generated bad compressed data.
-- Bytef is define'd instead of typedef'ed (work around Borland bug)
-- added an INDEX file
-- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
- Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
-- speed up adler32 for modern machines without auto-increment
-- added -ansi for IRIX in configure
-- static_init_done in trees.c is an int
-- define unlink as delete for VMS
-- fix configure for QNX
-- add configure branch for SCO and HPUX
-- avoid many warnings (unused variables, dead assignments, etc...)
-- no fdopen for BeOS
-- fix the Watcom fix for 32 bit mode (define FAR as empty)
-- removed redefinition of Byte for MKWERKS
-- work around an MWKERKS bug (incorrect merge of all .h files)
-
-Changes in 0.99 (27 Jan 96)
-- allow preset dictionary shared between compressor and decompressor
-- allow compression level 0 (no compression)
-- add deflateParams in zlib.h: allow dynamic change of compression level
- and compression strategy.
-- test large buffers and deflateParams in example.c
-- add optional "configure" to build zlib as a shared library
-- suppress Makefile.qnx, use configure instead
-- fixed deflate for 64-bit systems (detected on Cray)
-- fixed inflate_blocks for 64-bit systems (detected on Alpha)
-- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
-- always return Z_BUF_ERROR when deflate() has nothing to do
-- deflateInit and inflateInit are now macros to allow version checking
-- prefix all global functions and types with z_ with -DZ_PREFIX
-- make falloc completely reentrant (inftrees.c)
-- fixed very unlikely race condition in ct_static_init
-- free in reverse order of allocation to help memory manager
-- use zlib-1.0/* instead of zlib/* inside the tar.gz
-- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
- -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
-- allow gzread on concatenated .gz files
-- deflateEnd now returns Z_DATA_ERROR if it was premature
-- deflate is finally (?) fully deterministic (no matches beyond end of input)
-- Document Z_SYNC_FLUSH
-- add uninstall in Makefile
-- Check for __cpluplus in zlib.h
-- Better test in ct_align for partial flush
-- avoid harmless warnings for Borland C++
-- initialize hash_head in deflate.c
-- avoid warning on fdopen (gzio.c) for HP cc -Aa
-- include stdlib.h for STDC compilers
-- include errno.h for Cray
-- ignore error if ranlib doesn't exist
-- call ranlib twice for NeXTSTEP
-- use exec_prefix instead of prefix for libz.a
-- renamed ct_* as _tr_* to avoid conflict with applications
-- clear z->msg in inflateInit2 before any error return
-- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
-- fixed typo in zconf.h (_GNUC__ => __GNUC__)
-- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
-- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
-- in fcalloc, normalize pointer if size > 65520 bytes
-- don't use special fcalloc for 32 bit Borland C++
-- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
-- use Z_BINARY instead of BINARY
-- document that gzclose after gzdopen will close the file
-- allow "a" as mode in gzopen.
-- fix error checking in gzread
-- allow skipping .gz extra-field on pipes
-- added reference to Perl interface in README
-- put the crc table in FAR data (I dislike more and more the medium model :)
-- added get_crc_table
-- added a dimension to all arrays (Borland C can't count).
-- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
-- guard against multiple inclusion of *.h (for precompiled header on Mac)
-- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
-- don't use unsized arrays to avoid silly warnings by Visual C++:
- warning C4746: 'inflate_mask' : unsized array treated as '__far'
- (what's wrong with far data in far model?).
-- define enum out of inflate_blocks_state to allow compilation with C++
-
-Changes in 0.95 (16 Aug 95)
-- fix MSDOS small and medium model (now easier to adapt to any compiler)
-- inlined send_bits
-- fix the final (:-) bug for deflate with flush (output was correct but
- not completely flushed in rare occasions).
-- default window size is same for compression and decompression
- (it's now sufficient to set MAX_WBITS in zconf.h).
-- voidp -> voidpf and voidnp -> voidp (for consistency with other
- typedefs and because voidnp was not near in large model).
-
-Changes in 0.94 (13 Aug 95)
-- support MSDOS medium model
-- fix deflate with flush (could sometimes generate bad output)
-- fix deflateReset (zlib header was incorrectly suppressed)
-- added support for VMS
-- allow a compression level in gzopen()
-- gzflush now calls fflush
-- For deflate with flush, flush even if no more input is provided.
-- rename libgz.a as libz.a
-- avoid complex expression in infcodes.c triggering Turbo C bug
-- work around a problem with gcc on Alpha (in INSERT_STRING)
-- don't use inline functions (problem with some gcc versions)
-- allow renaming of Byte, uInt, etc... with #define.
-- avoid warning about (unused) pointer before start of array in deflate.c
-- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
-- avoid reserved word 'new' in trees.c
-
-Changes in 0.93 (25 June 95)
-- temporarily disable inline functions
-- make deflate deterministic
-- give enough lookahead for PARTIAL_FLUSH
-- Set binary mode for stdin/stdout in minigzip.c for OS/2
-- don't even use signed char in inflate (not portable enough)
-- fix inflate memory leak for segmented architectures
-
-Changes in 0.92 (3 May 95)
-- don't assume that char is signed (problem on SGI)
-- Clear bit buffer when starting a stored block
-- no memcpy on Pyramid
-- suppressed inftest.c
-- optimized fill_window, put longest_match inline for gcc
-- optimized inflate on stored blocks.
-- untabify all sources to simplify patches
-
-Changes in 0.91 (2 May 95)
-- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
-- Document the memory requirements in zconf.h
-- added "make install"
-- fix sync search logic in inflateSync
-- deflate(Z_FULL_FLUSH) now works even if output buffer too short
-- after inflateSync, don't scare people with just "lo world"
-- added support for DJGPP
-
-Changes in 0.9 (1 May 95)
-- don't assume that zalloc clears the allocated memory (the TurboC bug
- was Mark's bug after all :)
-- let again gzread copy uncompressed data unchanged (was working in 0.71)
-- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
-- added a test of inflateSync in example.c
-- moved MAX_WBITS to zconf.h because users might want to change that.
-- document explicitly that zalloc(64K) on MSDOS must return a normalized
- pointer (zero offset)
-- added Makefiles for Microsoft C, Turbo C, Borland C++
-- faster crc32()
-
-Changes in 0.8 (29 April 95)
-- added fast inflate (inffast.c)
-- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
- is incompatible with previous versions of zlib which returned Z_OK.
-- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
- (actually that was not a compiler bug, see 0.81 above)
-- gzread no longer reads one extra byte in certain cases
-- In gzio destroy(), don't reference a freed structure
-- avoid many warnings for MSDOS
-- avoid the ERROR symbol which is used by MS Windows
-
-Changes in 0.71 (14 April 95)
-- Fixed more MSDOS compilation problems :( There is still a bug with
- TurboC large model.
-
-Changes in 0.7 (14 April 95)
-- Added full inflate support.
-- Simplified the crc32() interface. The pre- and post-conditioning
- (one's complement) is now done inside crc32(). WARNING: this is
- incompatible with previous versions; see zlib.h for the new usage.
-
-Changes in 0.61 (12 April 95)
-- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
-
-Changes in 0.6 (11 April 95)
-- added minigzip.c
-- added gzdopen to reopen a file descriptor as gzFile
-- added transparent reading of non-gziped files in gzread.
-- fixed bug in gzread (don't read crc as data)
-- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
-- don't allocate big arrays in the stack (for MSDOS)
-- fix some MSDOS compilation problems
-
-Changes in 0.5:
-- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
- not yet Z_FULL_FLUSH.
-- support decompression but only in a single step (forced Z_FINISH)
-- added opaque object for zalloc and zfree.
-- added deflateReset and inflateReset
-- added a variable zlib_version for consistency checking.
-- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
- Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
-
-Changes in 0.4:
-- avoid "zip" everywhere, use zlib instead of ziplib.
-- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
- if compression method == 8.
-- added adler32 and crc32
-- renamed deflateOptions as deflateInit2, call one or the other but not both
-- added the method parameter for deflateInit2.
-- added inflateInit2
-- simplied considerably deflateInit and inflateInit by not supporting
- user-provided history buffer. This is supported only in deflateInit2
- and inflateInit2.
-
-Changes in 0.3:
-- prefix all macro names with Z_
-- use Z_FINISH instead of deflateEnd to finish compression.
-- added Z_HUFFMAN_ONLY
-- added gzerror()
+++ /dev/null
-
- Frequently Asked Questions about zlib
-
-
-If your question is not there, please check the zlib home page
-http://www.cdrom.com/pub/infozip/zlib/ which may have more recent information.
-
-
-1) I need a Windows DLL
-2) I need a Visual Basic interface to zlib
-3) compress() returns Z_BUF_ERROR
-4) deflate or inflate returns Z_BUF_ERROR
-5) Where is the zlib documentation (man pages, etc...)?
-6) Why don't you use GNU autoconf, libtool, etc...?
-7) There is a bug in zlib.
-8) I get "undefined reference to gzputc"
-
-
-
-1) I need a Windows DLL
-
- The zlib sources can be compiled without change to produce a DLL.
- If you want a precompiled DLL, see http://www.winimage.com/zLibDll
-
-
-2) I need a Visual Basic interface to zlib
-
- See http://www.tcfb.com/dowseware/cmp-z-it.zip
- http://web2.airmail.net/markn/articles/zlibtool/zlibtool.htm
- and contrib/visual-basic.txt
-
-3) compress() returns Z_BUF_ERROR
-
- Make sure that before the call of compress, the length of the
- compressed buffer is equal to the total size of the compressed buffer
- and not zero. For Visual Basic, check that this parameter is passed
- by reference ("as any"), not by value ("as long").
-
-
-4) deflate or inflate returns Z_BUF_ERROR
-
- Make sure that before the call avail_in and avail_out are not zero.
-
-
-5) Where is the zlib documentation (man pages, etc...)?
-
- It's in zlib.h for the moment. Volunteers to transform this
- to man pages, please contact jloup@gzip.org. Examples of zlib usage
- are in the files example.c and minigzip.c.
-
-
-6) Why don't you use GNU autoconf, libtool, etc...?
-
- Because we would like to keep zlib as a very small and simple package.
- zlib is rather portable and doesn't need much configuration.
-
-
-7) There is a bug in zlib.
-
- Most of the time, such problems are due to an incorrect usage
- of zlib. Please try to reproduce the problem with a small
- program and send us the corresponding source at zlib@quest.jpl.nasa.gov
- Do not send multi-megabyte data files without prior agreement.
-
-
-8) I get "undefined reference to gzputc"
-
- If "make test" produces something like
- example.o(.text+0x174):
- check that you don't have old files libz.* in /usr/lib, /usr/local/lib
- or /usr/X11R6/lib. Remove old versions then do "make install".
-
+++ /dev/null
-ChangeLog history of changes
-INDEX this file
-FAQ Frequently Asked Questions about zlib
-Make_vms.com script for Vax/VMS
-Makefile makefile for Unix (generated by configure)
-Makefile.in makefile for Unix (template for configure)
-Makefile.riscos makefile for RISCOS
-README guess what
-algorithm.txt description of the (de)compression algorithm
-configure configure script for Unix
-descrip.mms makefile for Vax/VMS
-zlib.3 mini man page for zlib (volunteers to write full
- man pages from zlib.h welcome. write to jloup@gzip.org)
-
-amiga/Makefile.sas makefile for Amiga SAS/C
-amiga/Makefile.pup makefile for Amiga powerUP SAS/C PPC
-
-msdos/Makefile.w32 makefile for Microsoft Visual C++ 32-bit
-msdos/Makefile.b32 makefile for Borland C++ 32-bit
-msdos/Makefile.bor makefile for Borland C/C++ 16-bit
-msdos/Makefile.dj2 makefile for DJGPP 2.x
-msdos/Makefile.emx makefile for EMX 0.9c (32-bit DOS/OS2)
-msdos/Makefile.msc makefile for Microsoft C 16-bit
-msdos/Makefile.tc makefile for Turbo C
-msdos/Makefile.wat makefile for Watcom C
-msdos/zlib.def definition file for Windows DLL
-msdos/zlib.rc definition file for Windows DLL
-
-nt/Makefile.nt makefile for Windows NT
-nt/zlib.dnt definition file for Windows NT DLL
-nt/Makefile.emx makefile for EMX 0.9c/RSXNT 1.41 (Win32 Intel)
-nt/Makefile.gcc makefile for Windows NT using GCC (mingw32)
-
-
- zlib public header files (must be kept):
-zconf.h
-zlib.h
-
- private source files used to build the zlib library:
-adler32.c
-compress.c
-crc32.c
-deflate.c
-deflate.h
-gzio.c
-infblock.c
-infblock.h
-infcodes.c
-infcodes.h
-inffast.c
-inffast.h
-inflate.c
-inftrees.c
-inftrees.h
-infutil.c
-infutil.h
-maketree.c
-trees.c
-uncompr.c
-zutil.c
-zutil.h
-
- source files for sample programs:
-example.c
-minigzip.c
-
- unsupported contribution by third parties
-
-contrib/asm386/ by Gilles Vollant <info@winimage.com>
- 386 asm code replacing longest_match().
-
-contrib/minizip/ by Gilles Vollant <info@winimage.com>
- Mini zip and unzip based on zlib
- See http://www.winimage.com/zLibDll/unzip.html
-
-contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
- A C++ I/O streams interface to the zlib gz* functions
-
-contrib/iostream2/ by Tyge LΓΈvset <Tyge.Lovset@cmr.no>
- Another C++ I/O streams interface
-
-contrib/untgz/ by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
- A very simple tar.gz extractor using zlib
-
-contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
- How to use compress(), uncompress() and the gz* functions from VB.
+++ /dev/null
-## Process this file with automake to produce Makefile.in
-
-#AUTOMAKE_OPTIONS = foreign
-
-# read local config files
-#ACLOCAL_M4 = $(top_srcdir)/config/aclocal.m4
-#AUTOHEADER = @AUTOHEADER@ --localdir=$(top_srcdir)/config
-
-EXTRA_DIST= ChangeLog FAQ INDEX README README.rrdtool algorithm.txt zlib.dsp zlib.dsw zlib.3
-
-CFLAGS = $(ZLIB_CFLAGS)
-
-noinst_LTLIBRARIES = librrd_z.la
-
-librrd_z_la_SOURCES = \
- adler32.c \
- compress.c \
- crc32.c \
- deflate.c \
- gzio.c \
- infblock.c \
- infcodes.c \
- inffast.c \
- inflate.c \
- inftrees.c \
- infutil.c \
- trees.c \
- uncompr.c \
- zutil.c \
- deflate.h infcodes.h inffixed.h infutil.h zconf.h zutil.h \
- infblock.h inffast.h inftrees.h trees.h zlib.h
+++ /dev/null
-zlib 1.1.3 is a general purpose data compression library. All the code
-is thread safe. The data format used by the zlib library
-is described by RFCs (Request for Comments) 1950 to 1952 in the files
-ftp://ds.internic.net/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate
-format) and rfc1952.txt (gzip format). These documents are also available in
-other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
-
-All functions of the compression library are documented in the file zlib.h
-(volunteer to write man pages welcome, contact jloup@gzip.org). A usage
-example of the library is given in the file example.c which also tests that
-the library is working correctly. Another example is given in the file
-minigzip.c. The compression library itself is composed of all source files
-except example.c and minigzip.c.
-
-To compile all files and run the test program, follow the instructions
-given at the top of Makefile. In short "make test; make install"
-should work for most machines. For Unix: "configure; make test; make install"
-For MSDOS, use one of the special makefiles such as Makefile.msc.
-For VMS, use Make_vms.com or descrip.mms.
-
-Questions about zlib should be sent to <zlib@quest.jpl.nasa.gov>, or to
-Gilles Vollant <info@winimage.com> for the Windows DLL version.
-The zlib home page is http://www.cdrom.com/pub/infozip/zlib/
-The official zlib ftp site is ftp://ftp.cdrom.com/pub/infozip/zlib/
-Before reporting a problem, please check those sites to verify that
-you have the latest version of zlib; otherwise get the latest version and
-check whether the problem still exists or not.
-
-Mark Nelson <markn@tiny.com> wrote an article about zlib for the Jan. 1997
-issue of Dr. Dobb's Journal; a copy of the article is available in
-http://web2.airmail.net/markn/articles/zlibtool/zlibtool.htm
-
-The changes made in version 1.1.3 are documented in the file ChangeLog.
-The main changes since 1.1.2 are:
-
-- fix "an inflate input buffer bug that shows up on rare but persistent
- occasions" (Mark)
-- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
-- fix gzseek(..., SEEK_SET) in write mode
-- fix crc check after a gzeek (Frank Faubert)
-- fix miniunzip when the last entry in a zip file is itself a zip file
- (J Lillge)
-- add contrib/asm586 and contrib/asm686 (Brian Raiter)
- See http://www.muppetlabs.com/~breadbox/software/assembly.html
-- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
-- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
-- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
-- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
-- added a FAQ file
-
-plus many changes for portability.
-
-Unsupported third party contributions are provided in directory "contrib".
-
-A Java implementation of zlib is available in the Java Development Kit 1.1
-http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
-See the zlib home page http://www.cdrom.com/pub/infozip/zlib/ for details.
-
-A Perl interface to zlib written by Paul Marquess <pmarquess@bfsec.bt.co.uk>
-is in the CPAN (Comprehensive Perl Archive Network) sites, such as:
-ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
-
-A Python interface to zlib written by A.M. Kuchling <amk@magnet.com>
-is available in Python 1.5 and later versions, see
-http://www.python.org/doc/lib/module-zlib.html
-
-A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com>
-is availlable at http://www.westend.com/~kupries/doc/trf/man/man.html
-
-An experimental package to read and write files in .zip format,
-written on top of zlib by Gilles Vollant <info@winimage.com>, is
-available at http://www.winimage.com/zLibDll/unzip.html
-and also in the contrib/minizip directory of zlib.
-
-
-Notes for some targets:
-
-- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc
- and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL
- The zlib DLL support was initially done by Alessandro Iacopetti and is
- now maintained by Gilles Vollant <info@winimage.com>. Check the zlib DLL
- home page at http://www.winimage.com/zLibDll
-
- From Visual Basic, you can call the DLL functions which do not take
- a structure as argument: compress, uncompress and all gz* functions.
- See contrib/visual-basic.txt for more information, or get
- http://www.tcfb.com/dowseware/cmp-z-it.zip
-
-- For 64-bit Irix, deflate.c must be compiled without any optimization.
- With -O, one libpng test fails. The test works in 32 bit mode (with
- the -n32 compiler flag). The compiler bug has been reported to SGI.
-
-- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1
- it works when compiled with cc.
-
-- on Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1
- is necessary to get gzprintf working correctly. This is done by configure.
-
-- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works
- with other compilers. Use "make test" to check your compiler.
-
-- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
-
-- For Turbo C the small model is supported only with reduced performance to
- avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-
-- For PalmOs, see http://www.cs.uit.no/~perm/PASTA/pilot/software.html
- Per Harald Myrvang <perm@stud.cs.uit.no>
-
-
-Acknowledgments:
-
- The deflate format used by zlib was defined by Phil Katz. The deflate
- and zlib specifications were written by L. Peter Deutsch. Thanks to all the
- people who reported problems and suggested various improvements in zlib;
- they are too numerous to cite here.
-
-Copyright notice:
-
- (C) 1995-1998 Jean-loup Gailly and Mark Adler
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Jean-loup Gailly Mark Adler
- jloup@gzip.org madler@alumni.caltech.edu
-
-If you use the zlib library in a product, we would appreciate *not*
-receiving lengthy legal documents to sign. The sources are provided
-for free but without warranty of any kind. The library has been
-entirely written by Jean-loup Gailly and Mark Adler; it does not
-include third-party code.
-
-If you redistribute modified sources, we would appreciate that you include
-in the file ChangeLog history information documenting your changes.
+++ /dev/null
-this version of zlib has been included with rrdtool ...
-the contrib directory has been removed ...
-get teh real thing if you want to hack with zlib
+++ /dev/null
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zlib.h"
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i) {s1 += buf[i]; s2 += s1;}
-#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf) DO8(buf,0); DO8(buf,8);
-
-/* ========================================================================= */
-uLong ZEXPORT adler32(adler, buf, len)
- uLong adler;
- const Bytef *buf;
- uInt len;
-{
- unsigned long s1 = adler & 0xffff;
- unsigned long s2 = (adler >> 16) & 0xffff;
- int k;
-
- if (buf == Z_NULL) return 1L;
-
- while (len > 0) {
- k = len < NMAX ? len : NMAX;
- len -= k;
- while (k >= 16) {
- DO16(buf);
- buf += 16;
- k -= 16;
- }
- if (k != 0) do {
- s1 += *buf++;
- s2 += s1;
- } while (--k);
- s1 %= BASE;
- s2 %= BASE;
- }
- return (s2 << 16) | s1;
-}
+++ /dev/null
-1. Compression algorithm (deflate)
-
-The deflation algorithm used by gzip (also zip and zlib) is a variation of
-LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
-the input data. The second occurrence of a string is replaced by a
-pointer to the previous string, in the form of a pair (distance,
-length). Distances are limited to 32K bytes, and lengths are limited
-to 258 bytes. When a string does not occur anywhere in the previous
-32K bytes, it is emitted as a sequence of literal bytes. (In this
-description, `string' must be taken as an arbitrary sequence of bytes,
-and is not restricted to printable characters.)
-
-Literals or match lengths are compressed with one Huffman tree, and
-match distances are compressed with another tree. The trees are stored
-in a compact form at the start of each block. The blocks can have any
-size (except that the compressed data for one block must fit in
-available memory). A block is terminated when deflate() determines that
-it would be useful to start another block with fresh trees. (This is
-somewhat similar to the behavior of LZW-based _compress_.)
-
-Duplicated strings are found using a hash table. All input strings of
-length 3 are inserted in the hash table. A hash index is computed for
-the next 3 bytes. If the hash chain for this index is not empty, all
-strings in the chain are compared with the current input string, and
-the longest match is selected.
-
-The hash chains are searched starting with the most recent strings, to
-favor small distances and thus take advantage of the Huffman encoding.
-The hash chains are singly linked. There are no deletions from the
-hash chains, the algorithm simply discards matches that are too old.
-
-To avoid a worst-case situation, very long hash chains are arbitrarily
-truncated at a certain length, determined by a runtime option (level
-parameter of deflateInit). So deflate() does not always find the longest
-possible match but generally finds a match which is long enough.
-
-deflate() also defers the selection of matches with a lazy evaluation
-mechanism. After a match of length N has been found, deflate() searches for
-a longer match at the next input byte. If a longer match is found, the
-previous match is truncated to a length of one (thus producing a single
-literal byte) and the process of lazy evaluation begins again. Otherwise,
-the original match is kept, and the next match search is attempted only N
-steps later.
-
-The lazy match evaluation is also subject to a runtime parameter. If
-the current match is long enough, deflate() reduces the search for a longer
-match, thus speeding up the whole process. If compression ratio is more
-important than speed, deflate() attempts a complete second search even if
-the first match is already long enough.
-
-The lazy match evaluation is not performed for the fastest compression
-modes (level parameter 1 to 3). For these fast modes, new strings
-are inserted in the hash table only when no match was found, or
-when the match is not too long. This degrades the compression ratio
-but saves time since there are both fewer insertions and fewer searches.
-
-
-2. Decompression algorithm (inflate)
-
-2.1 Introduction
-
-The real question is, given a Huffman tree, how to decode fast. The most
-important realization is that shorter codes are much more common than
-longer codes, so pay attention to decoding the short codes fast, and let
-the long codes take longer to decode.
-
-inflate() sets up a first level table that covers some number of bits of
-input less than the length of longest code. It gets that many bits from the
-stream, and looks it up in the table. The table will tell if the next
-code is that many bits or less and how many, and if it is, it will tell
-the value, else it will point to the next level table for which inflate()
-grabs more bits and tries to decode a longer code.
-
-How many bits to make the first lookup is a tradeoff between the time it
-takes to decode and the time it takes to build the table. If building the
-table took no time (and if you had infinite memory), then there would only
-be a first level table to cover all the way to the longest code. However,
-building the table ends up taking a lot longer for more bits since short
-codes are replicated many times in such a table. What inflate() does is
-simply to make the number of bits in the first table a variable, and set it
-for the maximum speed.
-
-inflate() sends new trees relatively often, so it is possibly set for a
-smaller first level table than an application that has only one tree for
-all the data. For inflate, which has 286 possible codes for the
-literal/length tree, the size of the first table is nine bits. Also the
-distance trees have 30 possible values, and the size of the first table is
-six bits. Note that for each of those cases, the table ended up one bit
-longer than the ``average'' code length, i.e. the code length of an
-approximately flat code which would be a little more than eight bits for
-286 symbols and a little less than five bits for 30 symbols. It would be
-interesting to see if optimizing the first level table for other
-applications gave values within a bit or two of the flat code size.
-
-
-2.2 More details on the inflate table lookup
-
-Ok, you want to know what this cleverly obfuscated inflate tree actually
-looks like. You are correct that it's not a Huffman tree. It is simply a
-lookup table for the first, let's say, nine bits of a Huffman symbol. The
-symbol could be as short as one bit or as long as 15 bits. If a particular
-symbol is shorter than nine bits, then that symbol's translation is duplicated
-in all those entries that start with that symbol's bits. For example, if the
-symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a
-symbol is nine bits long, it appears in the table once.
-
-If the symbol is longer than nine bits, then that entry in the table points
-to another similar table for the remaining bits. Again, there are duplicated
-entries as needed. The idea is that most of the time the symbol will be short
-and there will only be one table look up. (That's whole idea behind data
-compression in the first place.) For the less frequent long symbols, there
-will be two lookups. If you had a compression method with really long
-symbols, you could have as many levels of lookups as is efficient. For
-inflate, two is enough.
-
-So a table entry either points to another table (in which case nine bits in
-the above example are gobbled), or it contains the translation for the symbol
-and the number of bits to gobble. Then you start again with the next
-ungobbled bit.
-
-You may wonder: why not just have one lookup table for how ever many bits the
-longest symbol is? The reason is that if you do that, you end up spending
-more time filling in duplicate symbol entries than you do actually decoding.
-At least for deflate's output that generates new trees every several 10's of
-kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code
-would take too long if you're only decoding several thousand symbols. At the
-other extreme, you could make a new table for every bit in the code. In fact,
-that's essentially a Huffman tree. But then you spend two much time
-traversing the tree while decoding, even for short symbols.
-
-So the number of bits for the first lookup table is a trade of the time to
-fill out the table vs. the time spent looking at the second level and above of
-the table.
-
-Here is an example, scaled down:
-
-The code being decoded, with 10 symbols, from 1 to 6 bits long:
-
-A: 0
-B: 10
-C: 1100
-D: 11010
-E: 11011
-F: 11100
-G: 11101
-H: 11110
-I: 111110
-J: 111111
-
-Let's make the first table three bits long (eight entries):
-
-000: A,1
-001: A,1
-010: A,1
-011: A,1
-100: B,2
-101: B,2
-110: -> table X (gobble 3 bits)
-111: -> table Y (gobble 3 bits)
-
-Each entry is what the bits decode to and how many bits that is, i.e. how
-many bits to gobble. Or the entry points to another table, with the number of
-bits to gobble implicit in the size of the table.
-
-Table X is two bits long since the longest code starting with 110 is five bits
-long:
-
-00: C,1
-01: C,1
-10: D,2
-11: E,2
-
-Table Y is three bits long since the longest code starting with 111 is six
-bits long:
-
-000: F,2
-001: F,2
-010: G,2
-011: G,2
-100: H,2
-101: H,2
-110: I,3
-111: J,3
-
-So what we have here are three tables with a total of 20 entries that had to
-be constructed. That's compared to 64 entries for a single table. Or
-compared to 16 entries for a Huffman tree (six two entry tables and one four
-entry table). Assuming that the code ideally represents the probability of
-the symbols, it takes on the average 1.25 lookups per symbol. That's compared
-to one lookup for the single table, or 1.66 lookups per symbol for the
-Huffman tree.
-
-There, I think that gives you a picture of what's going on. For inflate, the
-meaning of a particular symbol is often more than just a letter. It can be a
-byte (a "literal"), or it can be either a length or a distance which
-indicates a base value and a number of bits to fetch after the code that is
-added to the base value. Or it might be the special end-of-block code. The
-data structures created in inftrees.c try to encode all that information
-compactly in the tables.
-
-
-Jean-loup Gailly Mark Adler
-jloup@gzip.org madler@alumni.caltech.edu
-
-
-References:
-
-[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
-Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
-pp. 337-343.
-
-``DEFLATE Compressed Data Format Specification'' available in
-ftp://ds.internic.net/rfc/rfc1951.txt
+++ /dev/null
-/* compress.c -- compress a memory buffer
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zlib.h"
-
-/* ===========================================================================
- Compresses the source buffer into the destination buffer. The level
- parameter has the same meaning as in deflateInit. sourceLen is the byte
- length of the source buffer. Upon entry, destLen is the total size of the
- destination buffer, which must be at least 0.1% larger than sourceLen plus
- 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
-
- compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_BUF_ERROR if there was not enough room in the output buffer,
- Z_STREAM_ERROR if the level parameter is invalid.
-*/
-int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
- Bytef *dest;
- uLongf *destLen;
- const Bytef *source;
- uLong sourceLen;
- int level;
-{
- z_stream stream;
- int err;
-
- stream.next_in = (Bytef*)source;
- stream.avail_in = (uInt)sourceLen;
-#ifdef MAXSEG_64K
- /* Check for source > 64K on 16-bit machine: */
- if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-#endif
- stream.next_out = dest;
- stream.avail_out = (uInt)*destLen;
- if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
-
- stream.zalloc = (alloc_func)0;
- stream.zfree = (free_func)0;
- stream.opaque = (voidpf)0;
-
- err = deflateInit(&stream, level);
- if (err != Z_OK) return err;
-
- err = deflate(&stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- deflateEnd(&stream);
- return err == Z_OK ? Z_BUF_ERROR : err;
- }
- *destLen = stream.total_out;
-
- err = deflateEnd(&stream);
- return err;
-}
-
-/* ===========================================================================
- */
-int ZEXPORT compress (dest, destLen, source, sourceLen)
- Bytef *dest;
- uLongf *destLen;
- const Bytef *source;
- uLong sourceLen;
-{
- return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
-}
+++ /dev/null
-/* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zlib.h"
-
-#define local static
-
-#ifdef DYNAMIC_CRC_TABLE
-
-local int crc_table_empty = 1;
-local uLongf crc_table[256];
-local void make_crc_table OF((void));
-
-/*
- Generate a table for a byte-wise 32-bit CRC calculation on the polynomial:
- x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
-
- Polynomials over GF(2) are represented in binary, one bit per coefficient,
- with the lowest powers in the most significant bit. Then adding polynomials
- is just exclusive-or, and multiplying a polynomial by x is a right shift by
- one. If we call the above polynomial p, and represent a byte as the
- polynomial q, also with the lowest power in the most significant bit (so the
- byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
- where a mod b means the remainder after dividing a by b.
-
- This calculation is done using the shift-register method of multiplying and
- taking the remainder. The register is initialized to zero, and for each
- incoming bit, x^32 is added mod p to the register if the bit is a one (where
- x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
- x (which is shifting right by one and adding x^32 mod p if the bit shifted
- out is a one). We start with the highest power (least significant bit) of
- q and repeat for all eight bits of q.
-
- The table is simply the CRC of all possible eight bit values. This is all
- the information needed to generate CRC's on data a byte at a time for all
- combinations of CRC register values and incoming bytes.
-*/
-local void make_crc_table()
-{
- uLong c;
- int n, k;
- uLong poly; /* polynomial exclusive-or pattern */
- /* terms of polynomial defining this crc (except x^32): */
- static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
-
- /* make exclusive-or pattern from polynomial (0xedb88320L) */
- poly = 0L;
- for (n = 0; n < sizeof(p)/sizeof(Byte); n++)
- poly |= 1L << (31 - p[n]);
-
- for (n = 0; n < 256; n++)
- {
- c = (uLong)n;
- for (k = 0; k < 8; k++)
- c = c & 1 ? poly ^ (c >> 1) : c >> 1;
- crc_table[n] = c;
- }
- crc_table_empty = 0;
-}
-#else
-/* ========================================================================
- * Table of CRC-32's of all single-byte values (made by make_crc_table)
- */
-local const uLongf crc_table[256] = {
- 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
- 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
- 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
- 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
- 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
- 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
- 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
- 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
- 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
- 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
- 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
- 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
- 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
- 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
- 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
- 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
- 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
- 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
- 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
- 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
- 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
- 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
- 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
- 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
- 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
- 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
- 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
- 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
- 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
- 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
- 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
- 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
- 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
- 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
- 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
- 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
- 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
- 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
- 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
- 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
- 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
- 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
- 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
- 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
- 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
- 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
- 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
- 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
- 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
- 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
- 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
- 0x2d02ef8dL
-};
-#endif
-
-/* =========================================================================
- * This function can be used by asm versions of crc32()
- */
-const uLongf * ZEXPORT get_crc_table()
-{
-#ifdef DYNAMIC_CRC_TABLE
- if (crc_table_empty) make_crc_table();
-#endif
- return (const uLongf *)crc_table;
-}
-
-/* ========================================================================= */
-#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);
-#define DO2(buf) DO1(buf); DO1(buf);
-#define DO4(buf) DO2(buf); DO2(buf);
-#define DO8(buf) DO4(buf); DO4(buf);
-
-/* ========================================================================= */
-uLong ZEXPORT crc32(crc, buf, len)
- uLong crc;
- const Bytef *buf;
- uInt len;
-{
- if (buf == Z_NULL) return 0L;
-#ifdef DYNAMIC_CRC_TABLE
- if (crc_table_empty)
- make_crc_table();
-#endif
- crc = crc ^ 0xffffffffL;
- while (len >= 8)
- {
- DO8(buf);
- len -= 8;
- }
- if (len) do {
- DO1(buf);
- } while (--len);
- return crc ^ 0xffffffffL;
-}
+++ /dev/null
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * ALGORITHM
- *
- * The "deflation" process depends on being able to identify portions
- * of the input text which are identical to earlier input (within a
- * sliding window trailing behind the input currently being processed).
- *
- * The most straightforward technique turns out to be the fastest for
- * most input files: try all possible matches and select the longest.
- * The key feature of this algorithm is that insertions into the string
- * dictionary are very simple and thus fast, and deletions are avoided
- * completely. Insertions are performed at each input character, whereas
- * string matches are performed only when the previous match ends. So it
- * is preferable to spend more time in matches to allow very fast string
- * insertions and avoid deletions. The matching algorithm for small
- * strings is inspired from that of Rabin & Karp. A brute force approach
- * is used to find longer strings when a small match has been found.
- * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- * (by Leonid Broukhis).
- * A previous version of this file used a more sophisticated algorithm
- * (by Fiala and Greene) which is guaranteed to run in linear amortized
- * time, but has a larger average cost, uses more memory and is patented.
- * However the F&G algorithm may be faster for some highly redundant
- * files if the parameter max_chain_length (described below) is too large.
- *
- * ACKNOWLEDGEMENTS
- *
- * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- * I found it in 'freeze' written by Leonid Broukhis.
- * Thanks to many people for bug reports and testing.
- *
- * REFERENCES
- *
- * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- * Available in ftp://ds.internic.net/rfc/rfc1951.txt
- *
- * A description of the Rabin and Karp algorithm is given in the book
- * "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- * Fiala,E.R., and Greene,D.H.
- * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* @(#) $Id$ */
-
-#include "deflate.h"
-
-const char deflate_copyright[] =
- " deflate 1.1.3 Copyright 1995-1998 Jean-loup Gailly ";
-/*
- If you use the zlib library in a product, an acknowledgment is welcome
- in the documentation of your product. If for some reason you cannot
- include such an acknowledgment, I would appreciate that you keep this
- copyright string in the executable of your product.
- */
-
-/* ===========================================================================
- * Function prototypes.
- */
-typedef enum {
- need_more, /* block not completed, need more input or more output */
- block_done, /* block flush performed */
- finish_started, /* finish started, need only more output at next deflate */
- finish_done /* finish done, accept no more input or output */
-} block_state;
-
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
-/* Compression function. Returns the block state after the call. */
-
-local void fill_window OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast OF((deflate_state *s, int flush));
-local block_state deflate_slow OF((deflate_state *s, int flush));
-local void lm_init OF((deflate_state *s));
-local void putShortMSB OF((deflate_state *s, uInt b));
-local void flush_pending OF((z_streamp strm));
-local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
-#ifdef ASMV
- void match_init OF((void)); /* asm code initialization */
- uInt longest_match OF((deflate_state *s, IPos cur_match));
-#else
-local uInt longest_match OF((deflate_state *s, IPos cur_match));
-#endif
-
-#ifdef DEBUG
-local void check_match OF((deflate_state *s, IPos start, IPos match,
- int length));
-#endif
-
-/* ===========================================================================
- * Local data
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-# define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-typedef struct config_s {
- ush good_length; /* reduce lazy search above this match length */
- ush max_lazy; /* do not perform lazy search above this match length */
- ush nice_length; /* quit search above this match length */
- ush max_chain;
- compress_func func;
-} config;
-
-local const config configuration_table[10] = {
-/* good lazy nice chain */
-/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
-/* 1 */ {4, 4, 8, 4, deflate_fast}, /* maximum speed, no lazy matches */
-/* 2 */ {4, 5, 16, 8, deflate_fast},
-/* 3 */ {4, 6, 32, 32, deflate_fast},
-
-/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */
-/* 5 */ {8, 16, 32, 32, deflate_slow},
-/* 6 */ {8, 16, 128, 128, deflate_slow},
-/* 7 */ {8, 32, 128, 256, deflate_slow},
-/* 8 */ {32, 128, 258, 1024, deflate_slow},
-/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN assertion: all calls to to UPDATE_HASH are made with consecutive
- * input characters, so that a running hash key can be computed from the
- * previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * If this file is compiled with -DFASTEST, the compression level is forced
- * to 1, and no hash chains are maintained.
- * IN assertion: all calls to to INSERT_STRING are made with consecutive
- * input characters and the first MIN_MATCH bytes of str are valid
- * (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#ifdef FASTEST
-#define INSERT_STRING(s, str, match_head) \
- (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
- match_head = s->head[s->ins_h], \
- s->head[s->ins_h] = (Pos)(str))
-#else
-#define INSERT_STRING(s, str, match_head) \
- (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
- s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
- s->head[s->ins_h] = (Pos)(str))
-#endif
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
- s->head[s->hash_size-1] = NIL; \
- zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int ZEXPORT deflateInit_(strm, level, version, stream_size)
- z_streamp strm;
- int level;
- const char *version;
- int stream_size;
-{
- return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
- Z_DEFAULT_STRATEGY, version, stream_size);
- /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
- version, stream_size)
- z_streamp strm;
- int level;
- int method;
- int windowBits;
- int memLevel;
- int strategy;
- const char *version;
- int stream_size;
-{
- deflate_state *s;
- int noheader = 0;
- static const char* my_version = ZLIB_VERSION;
-
- ushf *overlay;
- /* We overlay pending_buf and d_buf+l_buf. This works since the average
- * output size for (length,distance) codes is <= 24 bits.
- */
-
- if (version == Z_NULL || version[0] != my_version[0] ||
- stream_size != sizeof(z_stream)) {
- return Z_VERSION_ERROR;
- }
- if (strm == Z_NULL) return Z_STREAM_ERROR;
-
- strm->msg = Z_NULL;
- if (strm->zalloc == Z_NULL) {
- strm->zalloc = zcalloc;
- strm->opaque = (voidpf)0;
- }
- if (strm->zfree == Z_NULL) strm->zfree = zcfree;
-
- if (level == Z_DEFAULT_COMPRESSION) level = 6;
-#ifdef FASTEST
- level = 1;
-#endif
-
- if (windowBits < 0) { /* undocumented feature: suppress zlib header */
- noheader = 1;
- windowBits = -windowBits;
- }
- if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
- windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
- strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
- return Z_STREAM_ERROR;
- }
- s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
- if (s == Z_NULL) return Z_MEM_ERROR;
- strm->state = (struct internal_state FAR *)s;
- s->strm = strm;
-
- s->noheader = noheader;
- s->w_bits = windowBits;
- s->w_size = 1 << s->w_bits;
- s->w_mask = s->w_size - 1;
-
- s->hash_bits = memLevel + 7;
- s->hash_size = 1 << s->hash_bits;
- s->hash_mask = s->hash_size - 1;
- s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
- s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
- s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos));
- s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos));
-
- s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
- overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
- s->pending_buf = (uchf *) overlay;
- s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
-
- if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
- s->pending_buf == Z_NULL) {
- strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
- deflateEnd (strm);
- return Z_MEM_ERROR;
- }
- s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
- s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
-
- s->level = level;
- s->strategy = strategy;
- s->method = (Byte)method;
-
- return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
- z_streamp strm;
- const Bytef *dictionary;
- uInt dictLength;
-{
- deflate_state *s;
- uInt length = dictLength;
- uInt n;
- IPos hash_head = 0;
-
- if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
- strm->state->status != INIT_STATE) return Z_STREAM_ERROR;
-
- s = strm->state;
- strm->adler = adler32(strm->adler, dictionary, dictLength);
-
- if (length < MIN_MATCH) return Z_OK;
- if (length > MAX_DIST(s)) {
- length = MAX_DIST(s);
-#ifndef USE_DICT_HEAD
- dictionary += dictLength - length; /* use the tail of the dictionary */
-#endif
- }
- zmemcpy(s->window, dictionary, length);
- s->strstart = length;
- s->block_start = (long)length;
-
- /* Insert all strings in the hash table (except for the last two bytes).
- * s->lookahead stays null, so s->ins_h will be recomputed at the next
- * call of fill_window.
- */
- s->ins_h = s->window[0];
- UPDATE_HASH(s, s->ins_h, s->window[1]);
- for (n = 0; n <= length - MIN_MATCH; n++) {
- INSERT_STRING(s, n, hash_head);
- }
- if (hash_head) hash_head = 0; /* to make compiler happy */
- return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateReset (strm)
- z_streamp strm;
-{
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL ||
- strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR;
-
- strm->total_in = strm->total_out = 0;
- strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
- strm->data_type = Z_UNKNOWN;
-
- s = (deflate_state *)strm->state;
- s->pending = 0;
- s->pending_out = s->pending_buf;
-
- if (s->noheader < 0) {
- s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
- }
- s->status = s->noheader ? BUSY_STATE : INIT_STATE;
- strm->adler = 1;
- s->last_flush = Z_NO_FLUSH;
-
- _tr_init(s);
- lm_init(s);
-
- return Z_OK;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateParams(strm, level, strategy)
- z_streamp strm;
- int level;
- int strategy;
-{
- deflate_state *s;
- compress_func func;
- int err = Z_OK;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- s = strm->state;
-
- if (level == Z_DEFAULT_COMPRESSION) {
- level = 6;
- }
- if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
- return Z_STREAM_ERROR;
- }
- func = configuration_table[s->level].func;
-
- if (func != configuration_table[level].func && strm->total_in != 0) {
- /* Flush the last buffer: */
- err = deflate(strm, Z_PARTIAL_FLUSH);
- }
- if (s->level != level) {
- s->level = level;
- s->max_lazy_match = configuration_table[level].max_lazy;
- s->good_match = configuration_table[level].good_length;
- s->nice_match = configuration_table[level].nice_length;
- s->max_chain_length = configuration_table[level].max_chain;
- }
- s->strategy = strategy;
- return err;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
- deflate_state *s;
- uInt b;
-{
- put_byte(s, (Byte)(b >> 8));
- put_byte(s, (Byte)(b & 0xff));
-}
-
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-local void flush_pending(strm)
- z_streamp strm;
-{
- unsigned len = strm->state->pending;
-
- if (len > strm->avail_out) len = strm->avail_out;
- if (len == 0) return;
-
- zmemcpy(strm->next_out, strm->state->pending_out, len);
- strm->next_out += len;
- strm->state->pending_out += len;
- strm->total_out += len;
- strm->avail_out -= len;
- strm->state->pending -= len;
- if (strm->state->pending == 0) {
- strm->state->pending_out = strm->state->pending_buf;
- }
-}
-
-/* ========================================================================= */
-int ZEXPORT deflate (strm, flush)
- z_streamp strm;
- int flush;
-{
- int old_flush; /* value of flush param for previous deflate call */
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL ||
- flush > Z_FINISH || flush < 0) {
- return Z_STREAM_ERROR;
- }
- s = strm->state;
-
- if (strm->next_out == Z_NULL ||
- (strm->next_in == Z_NULL && strm->avail_in != 0) ||
- (s->status == FINISH_STATE && flush != Z_FINISH)) {
- ERR_RETURN(strm, Z_STREAM_ERROR);
- }
- if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
- s->strm = strm; /* just in case */
- old_flush = s->last_flush;
- s->last_flush = flush;
-
- /* Write the zlib header */
- if (s->status == INIT_STATE) {
-
- uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
- uInt level_flags = (s->level-1) >> 1;
-
- if (level_flags > 3) level_flags = 3;
- header |= (level_flags << 6);
- if (s->strstart != 0) header |= PRESET_DICT;
- header += 31 - (header % 31);
-
- s->status = BUSY_STATE;
- putShortMSB(s, header);
-
- /* Save the adler32 of the preset dictionary: */
- if (s->strstart != 0) {
- putShortMSB(s, (uInt)(strm->adler >> 16));
- putShortMSB(s, (uInt)(strm->adler & 0xffff));
- }
- strm->adler = 1L;
- }
-
- /* Flush as much pending output as possible */
- if (s->pending != 0) {
- flush_pending(strm);
- if (strm->avail_out == 0) {
- /* Since avail_out is 0, deflate will be called again with
- * more output space, but possibly with both pending and
- * avail_in equal to zero. There won't be anything to do,
- * but this is not an error situation so make sure we
- * return OK instead of BUF_ERROR at next call of deflate:
- */
- s->last_flush = -1;
- return Z_OK;
- }
-
- /* Make sure there is something to do and avoid duplicate consecutive
- * flushes. For repeated and useless calls with Z_FINISH, we keep
- * returning Z_STREAM_END instead of Z_BUFF_ERROR.
- */
- } else if (strm->avail_in == 0 && flush <= old_flush &&
- flush != Z_FINISH) {
- ERR_RETURN(strm, Z_BUF_ERROR);
- }
-
- /* User must not provide more input after the first FINISH: */
- if (s->status == FINISH_STATE && strm->avail_in != 0) {
- ERR_RETURN(strm, Z_BUF_ERROR);
- }
-
- /* Start a new block or continue the current one.
- */
- if (strm->avail_in != 0 || s->lookahead != 0 ||
- (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
- block_state bstate;
-
- bstate = (*(configuration_table[s->level].func))(s, flush);
-
- if (bstate == finish_started || bstate == finish_done) {
- s->status = FINISH_STATE;
- }
- if (bstate == need_more || bstate == finish_started) {
- if (strm->avail_out == 0) {
- s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
- }
- return Z_OK;
- /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
- * of deflate should use the same flush parameter to make sure
- * that the flush is complete. So we don't have to output an
- * empty block here, this will be done at next call. This also
- * ensures that for a very small output buffer, we emit at most
- * one empty block.
- */
- }
- if (bstate == block_done) {
- if (flush == Z_PARTIAL_FLUSH) {
- _tr_align(s);
- } else { /* FULL_FLUSH or SYNC_FLUSH */
- _tr_stored_block(s, (char*)0, 0L, 0);
- /* For a full flush, this empty block will be recognized
- * as a special marker by inflate_sync().
- */
- if (flush == Z_FULL_FLUSH) {
- CLEAR_HASH(s); /* forget history */
- }
- }
- flush_pending(strm);
- if (strm->avail_out == 0) {
- s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
- return Z_OK;
- }
- }
- }
- Assert(strm->avail_out > 0, "bug2");
-
- if (flush != Z_FINISH) return Z_OK;
- if (s->noheader) return Z_STREAM_END;
-
- /* Write the zlib trailer (adler32) */
- putShortMSB(s, (uInt)(strm->adler >> 16));
- putShortMSB(s, (uInt)(strm->adler & 0xffff));
- flush_pending(strm);
- /* If avail_out is zero, the application will call deflate again
- * to flush the rest.
- */
- s->noheader = -1; /* write the trailer only once! */
- return s->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int ZEXPORT deflateEnd (strm)
- z_streamp strm;
-{
- int status;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-
- status = strm->state->status;
- if (status != INIT_STATE && status != BUSY_STATE &&
- status != FINISH_STATE) {
- return Z_STREAM_ERROR;
- }
-
- /* Deallocate in reverse order of allocations: */
- TRY_FREE(strm, strm->state->pending_buf);
- TRY_FREE(strm, strm->state->head);
- TRY_FREE(strm, strm->state->prev);
- TRY_FREE(strm, strm->state->window);
-
- ZFREE(strm, strm->state);
- strm->state = Z_NULL;
-
- return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-}
-
-/* =========================================================================
- * Copy the source state to the destination state.
- * To simplify the source, this is not supported for 16-bit MSDOS (which
- * doesn't have enough memory anyway to duplicate compression states).
- */
-int ZEXPORT deflateCopy (dest, source)
- z_streamp dest;
- z_streamp source;
-{
-#ifdef MAXSEG_64K
- return Z_STREAM_ERROR;
-#else
- deflate_state *ds;
- deflate_state *ss;
- ushf *overlay;
-
-
- if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
- return Z_STREAM_ERROR;
- }
-
- ss = source->state;
-
- *dest = *source;
-
- ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
- if (ds == Z_NULL) return Z_MEM_ERROR;
- dest->state = (struct internal_state FAR *) ds;
- *ds = *ss;
- ds->strm = dest;
-
- ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
- ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos));
- ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos));
- overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
- ds->pending_buf = (uchf *) overlay;
-
- if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
- ds->pending_buf == Z_NULL) {
- deflateEnd (dest);
- return Z_MEM_ERROR;
- }
- /* following zmemcpy do not work for 16-bit MSDOS */
- zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
- zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
- zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
- zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
-
- ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
- ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
- ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
-
- ds->l_desc.dyn_tree = ds->dyn_ltree;
- ds->d_desc.dyn_tree = ds->dyn_dtree;
- ds->bl_desc.dyn_tree = ds->bl_tree;
-
- return Z_OK;
-#endif
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read. All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local int read_buf(strm, buf, size)
- z_streamp strm;
- Bytef *buf;
- unsigned size;
-{
- unsigned len = strm->avail_in;
-
- if (len > size) len = size;
- if (len == 0) return 0;
-
- strm->avail_in -= len;
-
- if (!strm->state->noheader) {
- strm->adler = adler32(strm->adler, strm->next_in, len);
- }
- zmemcpy(buf, strm->next_in, len);
- strm->next_in += len;
- strm->total_in += len;
-
- return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
- deflate_state *s;
-{
- s->window_size = (ulg)2L*s->w_size;
-
- CLEAR_HASH(s);
-
- /* Set the default configuration parameters:
- */
- s->max_lazy_match = configuration_table[s->level].max_lazy;
- s->good_match = configuration_table[s->level].good_length;
- s->nice_match = configuration_table[s->level].nice_length;
- s->max_chain_length = configuration_table[s->level].max_chain;
-
- s->strstart = 0;
- s->block_start = 0L;
- s->lookahead = 0;
- s->match_length = s->prev_length = MIN_MATCH-1;
- s->match_available = 0;
- s->ins_h = 0;
-#ifdef ASMV
- match_init(); /* initialize the asm code */
-#endif
-}
-
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- * OUT assertion: the match length is not greater than s->lookahead.
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-#ifndef FASTEST
-local uInt longest_match(s, cur_match)
- deflate_state *s;
- IPos cur_match; /* current match */
-{
- unsigned chain_length = s->max_chain_length;/* max hash chain length */
- register Bytef *scan = s->window + s->strstart; /* current string */
- register Bytef *match; /* matched string */
- register int len; /* length of current match */
- int best_len = s->prev_length; /* best match length so far */
- int nice_match = s->nice_match; /* stop if match long enough */
- IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
- s->strstart - (IPos)MAX_DIST(s) : NIL;
- /* Stop when cur_match becomes <= limit. To simplify the code,
- * we prevent matches with the string of window index 0.
- */
- Posf *prev = s->prev;
- uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
- /* Compare two bytes at a time. Note: this is not always beneficial.
- * Try with and without -DUNALIGNED_OK to check.
- */
- register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
- register ush scan_start = *(ushf*)scan;
- register ush scan_end = *(ushf*)(scan+best_len-1);
-#else
- register Bytef *strend = s->window + s->strstart + MAX_MATCH;
- register Byte scan_end1 = scan[best_len-1];
- register Byte scan_end = scan[best_len];
-#endif
-
- /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
- * It is easy to get rid of this optimization if necessary.
- */
- Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
- /* Do not waste too much time if we already have a good match: */
- if (s->prev_length >= s->good_match) {
- chain_length >>= 2;
- }
- /* Do not look for matches beyond the end of the input. This is necessary
- * to make deflate deterministic.
- */
- if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
- Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
- do {
- Assert(cur_match < s->strstart, "no future");
- match = s->window + cur_match;
-
- /* Skip to next match if the match length cannot increase
- * or if the match length is less than 2:
- */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
- /* This code assumes sizeof(unsigned short) == 2. Do not use
- * UNALIGNED_OK if your compiler uses a different size.
- */
- if (*(ushf*)(match+best_len-1) != scan_end ||
- *(ushf*)match != scan_start) continue;
-
- /* It is not necessary to compare scan[2] and match[2] since they are
- * always equal when the other bytes match, given that the hash keys
- * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
- * strstart+3, +5, ... up to strstart+257. We check for insufficient
- * lookahead only every 4th comparison; the 128th check will be made
- * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
- * necessary to put more guard bytes at the end of the window, or
- * to check more often for insufficient lookahead.
- */
- Assert(scan[2] == match[2], "scan[2]?");
- scan++, match++;
- do {
- } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- scan < strend);
- /* The funny "do {}" generates better code on most compilers */
-
- /* Here, scan <= window+strstart+257 */
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
- if (*scan == *match) scan++;
-
- len = (MAX_MATCH - 1) - (int)(strend-scan);
- scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
- if (match[best_len] != scan_end ||
- match[best_len-1] != scan_end1 ||
- *match != *scan ||
- *++match != scan[1]) continue;
-
- /* The check at best_len-1 can be removed because it will be made
- * again later. (This heuristic is not always a win.)
- * It is not necessary to compare scan[2] and match[2] since they
- * are always equal when the other bytes match, given that
- * the hash keys are equal and that HASH_BITS >= 8.
- */
- scan += 2, match++;
- Assert(*scan == *match, "match[2]?");
-
- /* We check for insufficient lookahead only every 8th comparison;
- * the 256th check will be made at strstart+258.
- */
- do {
- } while (*++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- scan < strend);
-
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
- len = MAX_MATCH - (int)(strend - scan);
- scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
- if (len > best_len) {
- s->match_start = cur_match;
- best_len = len;
- if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
- scan_end = *(ushf*)(scan+best_len-1);
-#else
- scan_end1 = scan[best_len-1];
- scan_end = scan[best_len];
-#endif
- }
- } while ((cur_match = prev[cur_match & wmask]) > limit
- && --chain_length != 0);
-
- if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
- return s->lookahead;
-}
-
-#else /* FASTEST */
-/* ---------------------------------------------------------------------------
- * Optimized version for level == 1 only
- */
-local uInt longest_match(s, cur_match)
- deflate_state *s;
- IPos cur_match; /* current match */
-{
- register Bytef *scan = s->window + s->strstart; /* current string */
- register Bytef *match; /* matched string */
- register int len; /* length of current match */
- register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-
- /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
- * It is easy to get rid of this optimization if necessary.
- */
- Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
- Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
- Assert(cur_match < s->strstart, "no future");
-
- match = s->window + cur_match;
-
- /* Return failure if the match length is less than 2:
- */
- if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
-
- /* The check at best_len-1 can be removed because it will be made
- * again later. (This heuristic is not always a win.)
- * It is not necessary to compare scan[2] and match[2] since they
- * are always equal when the other bytes match, given that
- * the hash keys are equal and that HASH_BITS >= 8.
- */
- scan += 2, match += 2;
- Assert(*scan == *match, "match[2]?");
-
- /* We check for insufficient lookahead only every 8th comparison;
- * the 256th check will be made at strstart+258.
- */
- do {
- } while (*++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- scan < strend);
-
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
- len = MAX_MATCH - (int)(strend - scan);
-
- if (len < MIN_MATCH) return MIN_MATCH - 1;
-
- s->match_start = cur_match;
- return len <= s->lookahead ? len : s->lookahead;
-}
-#endif /* FASTEST */
-#endif /* ASMV */
-
-#ifdef DEBUG
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
- deflate_state *s;
- IPos start, match;
- int length;
-{
- /* check that the match is indeed a match */
- if (zmemcmp(s->window + match,
- s->window + start, length) != EQUAL) {
- fprintf(stderr, " start %u, match %u, length %d\n",
- start, match, length);
- do {
- fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
- } while (--length != 0);
- z_error("invalid match");
- }
- if (z_verbose > 1) {
- fprintf(stderr,"\\[%d,%d]", start-match, length);
- do { putc(s->window[start++], stderr); } while (--length != 0);
- }
-}
-#else
-# define check_match(s, start, match, length)
-#endif
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- * At least one byte has been read, or avail_in == 0; reads are
- * performed for at least two bytes (required for the zip translate_eol
- * option -- not supported here).
- */
-local void fill_window(s)
- deflate_state *s;
-{
- register unsigned n, m;
- register Posf *p;
- unsigned more; /* Amount of free space at the end of the window. */
- uInt wsize = s->w_size;
-
- do {
- more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
- /* Deal with !@#$% 64K limit: */
- if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
- more = wsize;
-
- } else if (more == (unsigned)(-1)) {
- /* Very unlikely, but possible on 16 bit machine if strstart == 0
- * and lookahead == 1 (input done one byte at time)
- */
- more--;
-
- /* If the window is almost full and there is insufficient lookahead,
- * move the upper half to the lower one to make room in the upper half.
- */
- } else if (s->strstart >= wsize+MAX_DIST(s)) {
-
- zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
- s->match_start -= wsize;
- s->strstart -= wsize; /* we now have strstart >= MAX_DIST */
- s->block_start -= (long) wsize;
-
- /* Slide the hash table (could be avoided with 32 bit values
- at the expense of memory usage). We slide even when level == 0
- to keep the hash table consistent if we switch back to level > 0
- later. (Using level 0 permanently is not an optimal usage of
- zlib, so we don't care about this pathological case.)
- */
- n = s->hash_size;
- p = &s->head[n];
- do {
- m = *--p;
- *p = (Pos)(m >= wsize ? m-wsize : NIL);
- } while (--n);
-
- n = wsize;
-#ifndef FASTEST
- p = &s->prev[n];
- do {
- m = *--p;
- *p = (Pos)(m >= wsize ? m-wsize : NIL);
- /* If n is not on any hash chain, prev[n] is garbage but
- * its value will never be used.
- */
- } while (--n);
-#endif
- more += wsize;
- }
- if (s->strm->avail_in == 0) return;
-
- /* If there was no sliding:
- * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
- * more == window_size - lookahead - strstart
- * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
- * => more >= window_size - 2*WSIZE + 2
- * In the BIG_MEM or MMAP case (not yet supported),
- * window_size == input_size + MIN_LOOKAHEAD &&
- * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
- * Otherwise, window_size == 2*WSIZE so more >= 2.
- * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
- */
- Assert(more >= 2, "more < 2");
-
- n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
- s->lookahead += n;
-
- /* Initialize the hash value now that we have some input: */
- if (s->lookahead >= MIN_MATCH) {
- s->ins_h = s->window[s->strstart];
- UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
- Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
- }
- /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
- * but this is not important since only literal bytes will be emitted.
- */
-
- } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, eof) { \
- _tr_flush_block(s, (s->block_start >= 0L ? \
- (charf *)&s->window[(unsigned)s->block_start] : \
- (charf *)Z_NULL), \
- (ulg)((long)s->strstart - s->block_start), \
- (eof)); \
- s->block_start = s->strstart; \
- flush_pending(s->strm); \
- Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, eof) { \
- FLUSH_BLOCK_ONLY(s, eof); \
- if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
-}
-
-/* ===========================================================================
- * Copy without compression as much as possible from the input stream, return
- * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying from
- * window to pending_buf.
- */
-local block_state deflate_stored(s, flush)
- deflate_state *s;
- int flush;
-{
- /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
- * to pending_buf_size, and each stored block has a 5 byte header:
- */
- ulg max_block_size = 0xffff;
- ulg max_start;
-
- if (max_block_size > s->pending_buf_size - 5) {
- max_block_size = s->pending_buf_size - 5;
- }
-
- /* Copy as much as possible from input to output: */
- for (;;) {
- /* Fill the window as much as possible: */
- if (s->lookahead <= 1) {
-
- Assert(s->strstart < s->w_size+MAX_DIST(s) ||
- s->block_start >= (long)s->w_size, "slide too late");
-
- fill_window(s);
- if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
-
- if (s->lookahead == 0) break; /* flush the current block */
- }
- Assert(s->block_start >= 0L, "block gone");
-
- s->strstart += s->lookahead;
- s->lookahead = 0;
-
- /* Emit a stored block if pending_buf will be full: */
- max_start = s->block_start + max_block_size;
- if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
- /* strstart == 0 is possible when wraparound on 16-bit machine */
- s->lookahead = (uInt)(s->strstart - max_start);
- s->strstart = (uInt)max_start;
- FLUSH_BLOCK(s, 0);
- }
- /* Flush if we may have to slide, otherwise block_start may become
- * negative and the data will be gone:
- */
- if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
- FLUSH_BLOCK(s, 0);
- }
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return the current
- * block state.
- * This function does not perform lazy evaluation of matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local block_state deflate_fast(s, flush)
- deflate_state *s;
- int flush;
-{
- IPos hash_head = NIL; /* head of the hash chain */
- int bflush; /* set if current block must be flushed */
-
- for (;;) {
- /* Make sure that we always have enough lookahead, except
- * at the end of the input file. We need MAX_MATCH bytes
- * for the next match, plus MIN_MATCH bytes to insert the
- * string following the next match.
- */
- if (s->lookahead < MIN_LOOKAHEAD) {
- fill_window(s);
- if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
- return need_more;
- }
- if (s->lookahead == 0) break; /* flush the current block */
- }
-
- /* Insert the string window[strstart .. strstart+2] in the
- * dictionary, and set hash_head to the head of the hash chain:
- */
- if (s->lookahead >= MIN_MATCH) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
-
- /* Find the longest match, discarding those <= prev_length.
- * At this point we have always match_length < MIN_MATCH
- */
- if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
- /* To simplify the code, we prevent matches with the string
- * of window index 0 (in particular we have to avoid a match
- * of the string with itself at the start of the input file).
- */
- if (s->strategy != Z_HUFFMAN_ONLY) {
- s->match_length = longest_match (s, hash_head);
- }
- /* longest_match() sets match_start */
- }
- if (s->match_length >= MIN_MATCH) {
- check_match(s, s->strstart, s->match_start, s->match_length);
-
- _tr_tally_dist(s, s->strstart - s->match_start,
- s->match_length - MIN_MATCH, bflush);
-
- s->lookahead -= s->match_length;
-
- /* Insert new strings in the hash table only if the match length
- * is not too large. This saves time but degrades compression.
- */
-#ifndef FASTEST
- if (s->match_length <= s->max_insert_length &&
- s->lookahead >= MIN_MATCH) {
- s->match_length--; /* string at strstart already in hash table */
- do {
- s->strstart++;
- INSERT_STRING(s, s->strstart, hash_head);
- /* strstart never exceeds WSIZE-MAX_MATCH, so there are
- * always MIN_MATCH bytes ahead.
- */
- } while (--s->match_length != 0);
- s->strstart++;
- } else
-#endif
- {
- s->strstart += s->match_length;
- s->match_length = 0;
- s->ins_h = s->window[s->strstart];
- UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
- Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
- /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
- * matter since it will be recomputed at next deflate call.
- */
- }
- } else {
- /* No match, output a literal byte */
- Tracevv((stderr,"%c", s->window[s->strstart]));
- _tr_tally_lit (s, s->window[s->strstart], bflush);
- s->lookahead--;
- s->strstart++;
- }
- if (bflush) FLUSH_BLOCK(s, 0);
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local block_state deflate_slow(s, flush)
- deflate_state *s;
- int flush;
-{
- IPos hash_head = NIL; /* head of hash chain */
- int bflush; /* set if current block must be flushed */
-
- /* Process the input block. */
- for (;;) {
- /* Make sure that we always have enough lookahead, except
- * at the end of the input file. We need MAX_MATCH bytes
- * for the next match, plus MIN_MATCH bytes to insert the
- * string following the next match.
- */
- if (s->lookahead < MIN_LOOKAHEAD) {
- fill_window(s);
- if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
- return need_more;
- }
- if (s->lookahead == 0) break; /* flush the current block */
- }
-
- /* Insert the string window[strstart .. strstart+2] in the
- * dictionary, and set hash_head to the head of the hash chain:
- */
- if (s->lookahead >= MIN_MATCH) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
-
- /* Find the longest match, discarding those <= prev_length.
- */
- s->prev_length = s->match_length, s->prev_match = s->match_start;
- s->match_length = MIN_MATCH-1;
-
- if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
- s->strstart - hash_head <= MAX_DIST(s)) {
- /* To simplify the code, we prevent matches with the string
- * of window index 0 (in particular we have to avoid a match
- * of the string with itself at the start of the input file).
- */
- if (s->strategy != Z_HUFFMAN_ONLY) {
- s->match_length = longest_match (s, hash_head);
- }
- /* longest_match() sets match_start */
-
- if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
- (s->match_length == MIN_MATCH &&
- s->strstart - s->match_start > TOO_FAR))) {
-
- /* If prev_match is also MIN_MATCH, match_start is garbage
- * but we will ignore the current match anyway.
- */
- s->match_length = MIN_MATCH-1;
- }
- }
- /* If there was a match at the previous step and the current
- * match is not better, output the previous match:
- */
- if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
- uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
- /* Do not insert strings in hash table beyond this. */
-
- check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
- _tr_tally_dist(s, s->strstart -1 - s->prev_match,
- s->prev_length - MIN_MATCH, bflush);
-
- /* Insert in hash table all strings up to the end of the match.
- * strstart-1 and strstart are already inserted. If there is not
- * enough lookahead, the last two strings are not inserted in
- * the hash table.
- */
- s->lookahead -= s->prev_length-1;
- s->prev_length -= 2;
- do {
- if (++s->strstart <= max_insert) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
- } while (--s->prev_length != 0);
- s->match_available = 0;
- s->match_length = MIN_MATCH-1;
- s->strstart++;
-
- if (bflush) FLUSH_BLOCK(s, 0);
-
- } else if (s->match_available) {
- /* If there was no match at the previous position, output a
- * single literal. If there was a match but the current match
- * is longer, truncate the previous match to a single literal.
- */
- Tracevv((stderr,"%c", s->window[s->strstart-1]));
- _tr_tally_lit(s, s->window[s->strstart-1], bflush);
- if (bflush) {
- FLUSH_BLOCK_ONLY(s, 0);
- }
- s->strstart++;
- s->lookahead--;
- if (s->strm->avail_out == 0) return need_more;
- } else {
- /* There is no previous match to compare with, wait for
- * the next step to decide.
- */
- s->match_available = 1;
- s->strstart++;
- s->lookahead--;
- }
- }
- Assert (flush != Z_NO_FLUSH, "no flush?");
- if (s->match_available) {
- Tracevv((stderr,"%c", s->window[s->strstart-1]));
- _tr_tally_lit(s, s->window[s->strstart-1], bflush);
- s->match_available = 0;
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
+++ /dev/null
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-1998 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* @(#) $Id$ */
-
-#ifndef _DEFLATE_H
-#define _DEFLATE_H
-
-#include "zutil.h"
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS 256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES 30
-/* number of distance codes */
-
-#define BL_CODES 19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE 42
-#define BUSY_STATE 113
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
- union {
- ush freq; /* frequency count */
- ush code; /* bit string */
- } fc;
- union {
- ush dad; /* father node in Huffman tree */
- ush len; /* length of bit string */
- } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad dl.dad
-#define Len dl.len
-
-typedef struct static_tree_desc_s static_tree_desc;
-
-typedef struct tree_desc_s {
- ct_data *dyn_tree; /* the dynamic tree */
- int max_code; /* largest code with non zero frequency */
- static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct internal_state {
- z_streamp strm; /* pointer back to this zlib stream */
- int status; /* as the name implies */
- Bytef *pending_buf; /* output still pending */
- ulg pending_buf_size; /* size of pending_buf */
- Bytef *pending_out; /* next pending byte to output to the stream */
- int pending; /* nb of bytes in the pending buffer */
- int noheader; /* suppress zlib header and adler32 */
- Byte data_type; /* UNKNOWN, BINARY or ASCII */
- Byte method; /* STORED (for zip only) or DEFLATED */
- int last_flush; /* value of flush param for previous deflate call */
-
- /* used by deflate.c: */
-
- uInt w_size; /* LZ77 window size (32K by default) */
- uInt w_bits; /* log2(w_size) (8..16) */
- uInt w_mask; /* w_size - 1 */
-
- Bytef *window;
- /* Sliding window. Input bytes are read into the second half of the window,
- * and move to the first half later to keep a dictionary of at least wSize
- * bytes. With this organization, matches are limited to a distance of
- * wSize-MAX_MATCH bytes, but this ensures that IO is always
- * performed with a length multiple of the block size. Also, it limits
- * the window size to 64K, which is quite useful on MSDOS.
- * To do: use the user input buffer as sliding window.
- */
-
- ulg window_size;
- /* Actual size of window: 2*wSize, except when the user input buffer
- * is directly used as sliding window.
- */
-
- Posf *prev;
- /* Link to older string with same hash index. To limit the size of this
- * array to 64K, this link is maintained only for the last 32K strings.
- * An index in this array is thus a window index modulo 32K.
- */
-
- Posf *head; /* Heads of the hash chains or NIL. */
-
- uInt ins_h; /* hash index of string to be inserted */
- uInt hash_size; /* number of elements in hash table */
- uInt hash_bits; /* log2(hash_size) */
- uInt hash_mask; /* hash_size-1 */
-
- uInt hash_shift;
- /* Number of bits by which ins_h must be shifted at each input
- * step. It must be such that after MIN_MATCH steps, the oldest
- * byte no longer takes part in the hash key, that is:
- * hash_shift * MIN_MATCH >= hash_bits
- */
-
- long block_start;
- /* Window position at the beginning of the current output block. Gets
- * negative when the window is moved backwards.
- */
-
- uInt match_length; /* length of best match */
- IPos prev_match; /* previous match */
- int match_available; /* set if previous match exists */
- uInt strstart; /* start of string to insert */
- uInt match_start; /* start of matching string */
- uInt lookahead; /* number of valid bytes ahead in window */
-
- uInt prev_length;
- /* Length of the best match at previous step. Matches not greater than this
- * are discarded. This is used in the lazy match evaluation.
- */
-
- uInt max_chain_length;
- /* To speed up deflation, hash chains are never searched beyond this
- * length. A higher limit improves compression ratio but degrades the
- * speed.
- */
-
- uInt max_lazy_match;
- /* Attempt to find a better match only when the current match is strictly
- * smaller than this value. This mechanism is used only for compression
- * levels >= 4.
- */
-# define max_insert_length max_lazy_match
- /* Insert new strings in the hash table only if the match length is not
- * greater than this length. This saves time but degrades compression.
- * max_insert_length is used only for compression levels <= 3.
- */
-
- int level; /* compression level (1..9) */
- int strategy; /* favor or force Huffman coding*/
-
- uInt good_match;
- /* Use a faster search when the previous match is longer than this */
-
- int nice_match; /* Stop searching when current match exceeds this */
-
- /* used by trees.c: */
- /* Didn't use ct_data typedef below to supress compiler warning */
- struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
- struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
- struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
-
- struct tree_desc_s l_desc; /* desc. for literal tree */
- struct tree_desc_s d_desc; /* desc. for distance tree */
- struct tree_desc_s bl_desc; /* desc. for bit length tree */
-
- ush bl_count[MAX_BITS+1];
- /* number of codes at each bit length for an optimal tree */
-
- int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */
- int heap_len; /* number of elements in the heap */
- int heap_max; /* element of largest frequency */
- /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
- * The same heap array is used to build all trees.
- */
-
- uch depth[2*L_CODES+1];
- /* Depth of each subtree used as tie breaker for trees of equal frequency
- */
-
- uchf *l_buf; /* buffer for literals or lengths */
-
- uInt lit_bufsize;
- /* Size of match buffer for literals/lengths. There are 4 reasons for
- * limiting lit_bufsize to 64K:
- * - frequencies can be kept in 16 bit counters
- * - if compression is not successful for the first block, all input
- * data is still in the window so we can still emit a stored block even
- * when input comes from standard input. (This can also be done for
- * all blocks if lit_bufsize is not greater than 32K.)
- * - if compression is not successful for a file smaller than 64K, we can
- * even emit a stored file instead of a stored block (saving 5 bytes).
- * This is applicable only for zip (not gzip or zlib).
- * - creating new Huffman trees less frequently may not provide fast
- * adaptation to changes in the input data statistics. (Take for
- * example a binary file with poorly compressible code followed by
- * a highly compressible string table.) Smaller buffer sizes give
- * fast adaptation but have of course the overhead of transmitting
- * trees more frequently.
- * - I can't count above 4
- */
-
- uInt last_lit; /* running index in l_buf */
-
- ushf *d_buf;
- /* Buffer for distances. To simplify the code, d_buf and l_buf have
- * the same number of elements. To use different lengths, an extra flag
- * array would be necessary.
- */
-
- ulg opt_len; /* bit length of current block with optimal trees */
- ulg static_len; /* bit length of current block with static trees */
- uInt matches; /* number of string matches in current block */
- int last_eob_len; /* bit length of EOB code for last block */
-
-#ifdef DEBUG
- ulg compressed_len; /* total bit length of compressed file mod 2^32 */
- ulg bits_sent; /* bit length of compressed data sent mod 2^32 */
-#endif
-
- ush bi_buf;
- /* Output buffer. bits are inserted starting at the bottom (least
- * significant bits).
- */
- int bi_valid;
- /* Number of valid bits in bi_buf. All bits above the last valid bit
- * are always zero.
- */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
- /* in trees.c */
-void _tr_init OF((deflate_state *s));
-int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int eof));
-void _tr_align OF((deflate_state *s));
-void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int eof));
-
-#define d_code(dist) \
- ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. _dist_code[256] and _dist_code[257] are never
- * used.
- */
-
-#ifndef DEBUG
-/* Inline versions of _tr_tally for speed: */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
- extern uch _length_code[];
- extern uch _dist_code[];
-#else
- extern const uch _length_code[];
- extern const uch _dist_code[];
-#endif
-
-# define _tr_tally_lit(s, c, flush) \
- { uch cc = (c); \
- s->d_buf[s->last_lit] = 0; \
- s->l_buf[s->last_lit++] = cc; \
- s->dyn_ltree[cc].Freq++; \
- flush = (s->last_lit == s->lit_bufsize-1); \
- }
-# define _tr_tally_dist(s, distance, length, flush) \
- { uch len = (length); \
- ush dist = (distance); \
- s->d_buf[s->last_lit] = dist; \
- s->l_buf[s->last_lit++] = len; \
- dist--; \
- s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
- s->dyn_dtree[d_code(dist)].Freq++; \
- flush = (s->last_lit == s->lit_bufsize-1); \
- }
-#else
-# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
-# define _tr_tally_dist(s, distance, length, flush) \
- flush = _tr_tally(s, distance, length)
-#endif
-
-#endif
+++ /dev/null
-# descrip.mms: MMS description file for building zlib on VMS
-# written by Martin P.J. Zinser <m.zinser@gsi.de>
-
-cc_defs =
-c_deb =
-
-.ifdef __DECC__
-pref = /prefix=all
-.endif
-
-OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\
- deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\
- inftrees.obj, infcodes.obj, infutil.obj, inffast.obj
-
-CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF)
-
-all : example.exe minigzip.exe
- @ write sys$output " Example applications available"
-libz.olb : libz.olb($(OBJS))
- @ write sys$output " libz available"
-
-example.exe : example.obj libz.olb
- link example,libz.olb/lib
-
-minigzip.exe : minigzip.obj libz.olb
- link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
-
-clean :
- delete *.obj;*,libz.olb;*
-
-
-# Other dependencies.
-adler32.obj : zutil.h zlib.h zconf.h
-compress.obj : zlib.h zconf.h
-crc32.obj : zutil.h zlib.h zconf.h
-deflate.obj : deflate.h zutil.h zlib.h zconf.h
-example.obj : zlib.h zconf.h
-gzio.obj : zutil.h zlib.h zconf.h
-infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
-inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-inflate.obj : zutil.h zlib.h zconf.h infblock.h
-inftrees.obj : zutil.h zlib.h zconf.h inftrees.h
-infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h
-minigzip.obj : zlib.h zconf.h
-trees.obj : deflate.h zutil.h zlib.h zconf.h
-uncompr.obj : zlib.h zconf.h
-zutil.obj : zutil.h zlib.h zconf.h
+++ /dev/null
-/* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include <stdio.h>
-#include "zlib.h"
-
-#ifdef STDC
-# include <string.h>
-# include <stdlib.h>
-#else
- extern void exit OF((int));
-#endif
-
-#if defined(VMS) || defined(RISCOS)
-# define TESTFILE "foo-gz"
-#else
-# define TESTFILE "foo.gz"
-#endif
-
-#define CHECK_ERR(err, msg) { \
- if (err != Z_OK) { \
- fprintf(stderr, "%s error: %d\n", msg, err); \
- exit(1); \
- } \
-}
-
-const char hello[] = "hello, hello!";
-/* "hello world" would be more standard, but the repeated "hello"
- * stresses the compression code better, sorry...
- */
-
-const char dictionary[] = "hello";
-uLong dictId; /* Adler32 value of the dictionary */
-
-void test_compress OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_gzio OF((const char *out, const char *in,
- Byte *uncompr, int uncomprLen));
-void test_deflate OF((Byte *compr, uLong comprLen));
-void test_inflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_large_deflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_large_inflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_flush OF((Byte *compr, uLong *comprLen));
-void test_sync OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_dict_deflate OF((Byte *compr, uLong comprLen));
-void test_dict_inflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-int main OF((int argc, char *argv[]));
-
-/* ===========================================================================
- * Test compress() and uncompress()
- */
-void test_compress(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- uLong len = strlen(hello)+1;
-
- err = compress(compr, &comprLen, (const Bytef*)hello, len);
- CHECK_ERR(err, "compress");
-
- strcpy((char*)uncompr, "garbage");
-
- err = uncompress(uncompr, &uncomprLen, compr, comprLen);
- CHECK_ERR(err, "uncompress");
-
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad uncompress\n");
- exit(1);
- } else {
- printf("uncompress(): %s\n", (char *)uncompr);
- }
-}
-
-/* ===========================================================================
- * Test read/write of .gz files
- */
-void test_gzio(out, in, uncompr, uncomprLen)
- const char *out; /* compressed output file */
- const char *in; /* compressed input file */
- Byte *uncompr;
- int uncomprLen;
-{
- int err;
- int len = strlen(hello)+1;
- gzFile file;
- z_off_t pos;
-
- file = gzopen(out, "wb");
- if (file == NULL) {
- fprintf(stderr, "gzopen error\n");
- exit(1);
- }
- gzputc(file, 'h');
- if (gzputs(file, "ello") != 4) {
- fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
- exit(1);
- }
- if (gzprintf(file, ", %s!", "hello") != 8) {
- fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
- exit(1);
- }
- gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
- gzclose(file);
-
- file = gzopen(in, "rb");
- if (file == NULL) {
- fprintf(stderr, "gzopen error\n");
- }
- strcpy((char*)uncompr, "garbage");
-
- uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen);
- if (uncomprLen != len) {
- fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
- exit(1);
- }
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
- exit(1);
- } else {
- printf("gzread(): %s\n", (char *)uncompr);
- }
-
- pos = gzseek(file, -8L, SEEK_CUR);
- if (pos != 6 || gztell(file) != pos) {
- fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
- (long)pos, (long)gztell(file));
- exit(1);
- }
-
- if (gzgetc(file) != ' ') {
- fprintf(stderr, "gzgetc error\n");
- exit(1);
- }
-
- gzgets(file, (char*)uncompr, uncomprLen);
- uncomprLen = strlen((char*)uncompr);
- if (uncomprLen != 6) { /* "hello!" */
- fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
- exit(1);
- }
- if (strcmp((char*)uncompr, hello+7)) {
- fprintf(stderr, "bad gzgets after gzseek\n");
- exit(1);
- } else {
- printf("gzgets() after gzseek: %s\n", (char *)uncompr);
- }
-
- gzclose(file);
-}
-
-/* ===========================================================================
- * Test deflate() with small buffers
- */
-void test_deflate(compr, comprLen)
- Byte *compr;
- uLong comprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
- int len = strlen(hello)+1;
-
- c_stream.zalloc = (alloc_func)0;
- c_stream.zfree = (free_func)0;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
- CHECK_ERR(err, "deflateInit");
-
- c_stream.next_in = (Bytef*)hello;
- c_stream.next_out = compr;
-
- while (c_stream.total_in != (uLong)len && c_stream.total_out < comprLen) {
- c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
- }
- /* Finish the stream, still forcing small buffers: */
- for (;;) {
- c_stream.avail_out = 1;
- err = deflate(&c_stream, Z_FINISH);
- if (err == Z_STREAM_END) break;
- CHECK_ERR(err, "deflate");
- }
-
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with small buffers
- */
-void test_inflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = (alloc_func)0;
- d_stream.zfree = (free_func)0;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = 0;
- d_stream.next_out = uncompr;
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
- d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
- err = inflate(&d_stream, Z_NO_FLUSH);
- if (err == Z_STREAM_END) break;
- CHECK_ERR(err, "inflate");
- }
-
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad inflate\n");
- exit(1);
- } else {
- printf("inflate(): %s\n", (char *)uncompr);
- }
-}
-
-/* ===========================================================================
- * Test deflate() with large buffers and dynamic change of compression level
- */
-void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
-
- c_stream.zalloc = (alloc_func)0;
- c_stream.zfree = (free_func)0;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_BEST_SPEED);
- CHECK_ERR(err, "deflateInit");
-
- c_stream.next_out = compr;
- c_stream.avail_out = (uInt)comprLen;
-
- /* At this point, uncompr is still mostly zeroes, so it should compress
- * very well:
- */
- c_stream.next_in = uncompr;
- c_stream.avail_in = (uInt)uncomprLen;
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
- if (c_stream.avail_in != 0) {
- fprintf(stderr, "deflate not greedy\n");
- exit(1);
- }
-
- /* Feed in already compressed data and switch to no compression: */
- deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
- c_stream.next_in = compr;
- c_stream.avail_in = (uInt)comprLen/2;
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
-
- /* Switch back to compressing mode: */
- deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
- c_stream.next_in = uncompr;
- c_stream.avail_in = (uInt)uncomprLen;
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
-
- err = deflate(&c_stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- fprintf(stderr, "deflate should report Z_STREAM_END\n");
- exit(1);
- }
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with large buffers
- */
-void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = (alloc_func)0;
- d_stream.zfree = (free_func)0;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = (uInt)comprLen;
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- for (;;) {
- d_stream.next_out = uncompr; /* discard the output */
- d_stream.avail_out = (uInt)uncomprLen;
- err = inflate(&d_stream, Z_NO_FLUSH);
- if (err == Z_STREAM_END) break;
- CHECK_ERR(err, "large inflate");
- }
-
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
- fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
- exit(1);
- } else {
- printf("large_inflate(): OK\n");
- }
-}
-
-/* ===========================================================================
- * Test deflate() with full flush
- */
-void test_flush(compr, comprLen)
- Byte *compr;
- uLong *comprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
- int len = strlen(hello)+1;
-
- c_stream.zalloc = (alloc_func)0;
- c_stream.zfree = (free_func)0;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
- CHECK_ERR(err, "deflateInit");
-
- c_stream.next_in = (Bytef*)hello;
- c_stream.next_out = compr;
- c_stream.avail_in = 3;
- c_stream.avail_out = (uInt)*comprLen;
- err = deflate(&c_stream, Z_FULL_FLUSH);
- CHECK_ERR(err, "deflate");
-
- compr[3]++; /* force an error in first compressed block */
- c_stream.avail_in = len - 3;
-
- err = deflate(&c_stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- CHECK_ERR(err, "deflate");
- }
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-
- *comprLen = c_stream.total_out;
-}
-
-/* ===========================================================================
- * Test inflateSync()
- */
-void test_sync(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = (alloc_func)0;
- d_stream.zfree = (free_func)0;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = 2; /* just read the zlib header */
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- d_stream.next_out = uncompr;
- d_stream.avail_out = (uInt)uncomprLen;
-
- inflate(&d_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "inflate");
-
- d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */
- err = inflateSync(&d_stream); /* but skip the damaged part */
- CHECK_ERR(err, "inflateSync");
-
- err = inflate(&d_stream, Z_FINISH);
- if (err != Z_DATA_ERROR) {
- fprintf(stderr, "inflate should report DATA_ERROR\n");
- /* Because of incorrect adler32 */
- exit(1);
- }
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- printf("after inflateSync(): hel%s\n", (char *)uncompr);
-}
-
-/* ===========================================================================
- * Test deflate() with preset dictionary
- */
-void test_dict_deflate(compr, comprLen)
- Byte *compr;
- uLong comprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
-
- c_stream.zalloc = (alloc_func)0;
- c_stream.zfree = (free_func)0;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
- CHECK_ERR(err, "deflateInit");
-
- err = deflateSetDictionary(&c_stream,
- (const Bytef*)dictionary, sizeof(dictionary));
- CHECK_ERR(err, "deflateSetDictionary");
-
- dictId = c_stream.adler;
- c_stream.next_out = compr;
- c_stream.avail_out = (uInt)comprLen;
-
- c_stream.next_in = (Bytef*)hello;
- c_stream.avail_in = (uInt)strlen(hello)+1;
-
- err = deflate(&c_stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- fprintf(stderr, "deflate should report Z_STREAM_END\n");
- exit(1);
- }
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with a preset dictionary
- */
-void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = (alloc_func)0;
- d_stream.zfree = (free_func)0;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = (uInt)comprLen;
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- d_stream.next_out = uncompr;
- d_stream.avail_out = (uInt)uncomprLen;
-
- for (;;) {
- err = inflate(&d_stream, Z_NO_FLUSH);
- if (err == Z_STREAM_END) break;
- if (err == Z_NEED_DICT) {
- if (d_stream.adler != dictId) {
- fprintf(stderr, "unexpected dictionary");
- exit(1);
- }
- err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
- sizeof(dictionary));
- }
- CHECK_ERR(err, "inflate with dict");
- }
-
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad inflate with dict\n");
- exit(1);
- } else {
- printf("inflate with dictionary: %s\n", (char *)uncompr);
- }
-}
-
-/* ===========================================================================
- * Usage: example [output.gz [input.gz]]
- */
-
-int main(argc, argv)
- int argc;
- char *argv[];
-{
- Byte *compr, *uncompr;
- uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
- uLong uncomprLen = comprLen;
- static const char* myVersion = ZLIB_VERSION;
-
- if (zlibVersion()[0] != myVersion[0]) {
- fprintf(stderr, "incompatible zlib version\n");
- exit(1);
-
- } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
- fprintf(stderr, "warning: different zlib version\n");
- }
-
- compr = (Byte*)calloc((uInt)comprLen, 1);
- uncompr = (Byte*)calloc((uInt)uncomprLen, 1);
- /* compr and uncompr are cleared to avoid reading uninitialized
- * data and to ensure that uncompr compresses well.
- */
- if (compr == Z_NULL || uncompr == Z_NULL) {
- printf("out of memory\n");
- exit(1);
- }
- test_compress(compr, comprLen, uncompr, uncomprLen);
-
- test_gzio((argc > 1 ? argv[1] : TESTFILE),
- (argc > 2 ? argv[2] : TESTFILE),
- uncompr, (int)uncomprLen);
-
- test_deflate(compr, comprLen);
- test_inflate(compr, comprLen, uncompr, uncomprLen);
-
- test_large_deflate(compr, comprLen, uncompr, uncomprLen);
- test_large_inflate(compr, comprLen, uncompr, uncomprLen);
-
- test_flush(compr, &comprLen);
- test_sync(compr, comprLen, uncompr, uncomprLen);
- comprLen = uncomprLen;
-
- test_dict_deflate(compr, comprLen);
- test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
-
- exit(0);
- return 0; /* to avoid warning */
-}
+++ /dev/null
-/* gzio.c -- IO on .gz files
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- *
- * Compile this file with -DNO_DEFLATE to avoid the compression code.
- */
-
-/* @(#) $Id$ */
-
-#include <stdio.h>
-
-#include "zutil.h"
-
-struct internal_state {int dummy;}; /* for buggy compilers */
-
-#ifndef Z_BUFSIZE
-# ifdef MAXSEG_64K
-# define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
-# else
-# define Z_BUFSIZE 16384
-# endif
-#endif
-#ifndef Z_PRINTF_BUFSIZE
-# define Z_PRINTF_BUFSIZE 4096
-#endif
-
-#define ALLOC(size) malloc(size)
-#define TRYFREE(p) {if (p) free(p);}
-
-static int gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
-#define HEAD_CRC 0x02 /* bit 1 set: header CRC present */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define RESERVED 0xE0 /* bits 5..7: reserved */
-
-typedef struct gz_stream {
- z_stream stream;
- int z_err; /* error code for last stream operation */
- int z_eof; /* set if end of input file */
- FILE *file; /* .gz file */
- Byte *inbuf; /* input buffer */
- Byte *outbuf; /* output buffer */
- uLong crc; /* crc32 of uncompressed data */
- char *msg; /* error message */
- char *path; /* path name for debugging only */
- int transparent; /* 1 if input file is not a .gz file */
- char mode; /* 'w' or 'r' */
- long startpos; /* start of compressed data in file (header skipped) */
-} gz_stream;
-
-
-local gzFile gz_open OF((const char *path, const char *mode, int fd));
-local int do_flush OF((gzFile file, int flush));
-local int get_byte OF((gz_stream *s));
-local void check_header OF((gz_stream *s));
-local int destroy OF((gz_stream *s));
-local void putLong OF((FILE *file, uLong x));
-local uLong getLong OF((gz_stream *s));
-
-/* ===========================================================================
- Opens a gzip (.gz) file for reading or writing. The mode parameter
- is as in fopen ("rb" or "wb"). The file is given either by file descriptor
- or path name (if fd == -1).
- gz_open return NULL if the file could not be opened or if there was
- insufficient memory to allocate the (de)compression state; errno
- can be checked to distinguish the two cases (if errno is zero, the
- zlib error is Z_MEM_ERROR).
-*/
-local gzFile gz_open (path, mode, fd)
- const char *path;
- const char *mode;
- int fd;
-{
- int err;
- int level = Z_DEFAULT_COMPRESSION; /* compression level */
- int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
- char *p = (char*)mode;
- gz_stream *s;
- char fmode[80]; /* copy of mode, without the compression level */
- char *m = fmode;
-
- if (!path || !mode) return Z_NULL;
-
- s = (gz_stream *)ALLOC(sizeof(gz_stream));
- if (!s) return Z_NULL;
-
- s->stream.zalloc = (alloc_func)0;
- s->stream.zfree = (free_func)0;
- s->stream.opaque = (voidpf)0;
- s->stream.next_in = s->inbuf = Z_NULL;
- s->stream.next_out = s->outbuf = Z_NULL;
- s->stream.avail_in = s->stream.avail_out = 0;
- s->file = NULL;
- s->z_err = Z_OK;
- s->z_eof = 0;
- s->crc = crc32(0L, Z_NULL, 0);
- s->msg = NULL;
- s->transparent = 0;
-
- s->path = (char*)ALLOC(strlen(path)+1);
- if (s->path == NULL) {
- return destroy(s), (gzFile)Z_NULL;
- }
- strcpy(s->path, path); /* do this early for debugging */
-
- s->mode = '\0';
- do {
- if (*p == 'r') s->mode = 'r';
- if (*p == 'w' || *p == 'a') s->mode = 'w';
- if (*p >= '0' && *p <= '9') {
- level = *p - '0';
- } else if (*p == 'f') {
- strategy = Z_FILTERED;
- } else if (*p == 'h') {
- strategy = Z_HUFFMAN_ONLY;
- } else {
- *m++ = *p; /* copy the mode */
- }
- } while (*p++ && m != fmode + sizeof(fmode));
- if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
-
- if (s->mode == 'w') {
-#ifdef NO_DEFLATE
- err = Z_STREAM_ERROR;
-#else
- err = deflateInit2(&(s->stream), level,
- Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
- /* windowBits is passed < 0 to suppress zlib header */
-
- s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
-#endif
- if (err != Z_OK || s->outbuf == Z_NULL) {
- return destroy(s), (gzFile)Z_NULL;
- }
- } else {
- s->stream.next_in = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
-
- err = inflateInit2(&(s->stream), -MAX_WBITS);
- /* windowBits is passed < 0 to tell that there is no zlib header.
- * Note that in this case inflate *requires* an extra "dummy" byte
- * after the compressed stream in order to complete decompression and
- * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
- * present after the compressed stream.
- */
- if (err != Z_OK || s->inbuf == Z_NULL) {
- return destroy(s), (gzFile)Z_NULL;
- }
- }
- s->stream.avail_out = Z_BUFSIZE;
-
- errno = 0;
- s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
-
- if (s->file == NULL) {
- return destroy(s), (gzFile)Z_NULL;
- }
- if (s->mode == 'w') {
- /* Write a very simple .gz header:
- */
- fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
- Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
- s->startpos = 10L;
- /* We use 10L instead of ftell(s->file) to because ftell causes an
- * fflush on some systems. This version of the library doesn't use
- * startpos anyway in write mode, so this initialization is not
- * necessary.
- */
- } else {
- check_header(s); /* skip the .gz header */
- s->startpos = (ftell(s->file) - s->stream.avail_in);
- }
-
- return (gzFile)s;
-}
-
-/* ===========================================================================
- Opens a gzip (.gz) file for reading or writing.
-*/
-gzFile ZEXPORT gzopen (path, mode)
- const char *path;
- const char *mode;
-{
- return gz_open (path, mode, -1);
-}
-
-/* ===========================================================================
- Associate a gzFile with the file descriptor fd. fd is not dup'ed here
- to mimic the behavio(u)r of fdopen.
-*/
-gzFile ZEXPORT gzdopen (fd, mode)
- int fd;
- const char *mode;
-{
- char name[20];
-
- if (fd < 0) return (gzFile)Z_NULL;
- sprintf(name, "<fd:%d>", fd); /* for debugging */
-
- return gz_open (name, mode, fd);
-}
-
-/* ===========================================================================
- * Update the compression level and strategy
- */
-int ZEXPORT gzsetparams (file, level, strategy)
- gzFile file;
- int level;
- int strategy;
-{
- gz_stream *s = (gz_stream*)file;
-
- if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
- /* Make room to allow flushing */
- if (s->stream.avail_out == 0) {
-
- s->stream.next_out = s->outbuf;
- if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
- s->z_err = Z_ERRNO;
- }
- s->stream.avail_out = Z_BUFSIZE;
- }
-
- return deflateParams (&(s->stream), level, strategy);
-}
-
-/* ===========================================================================
- Read a byte from a gz_stream; update next_in and avail_in. Return EOF
- for end of file.
- IN assertion: the stream s has been sucessfully opened for reading.
-*/
-local int get_byte(s)
- gz_stream *s;
-{
- if (s->z_eof) return EOF;
- if (s->stream.avail_in == 0) {
- errno = 0;
- s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
- if (s->stream.avail_in == 0) {
- s->z_eof = 1;
- if (ferror(s->file)) s->z_err = Z_ERRNO;
- return EOF;
- }
- s->stream.next_in = s->inbuf;
- }
- s->stream.avail_in--;
- return *(s->stream.next_in)++;
-}
-
-/* ===========================================================================
- Check the gzip header of a gz_stream opened for reading. Set the stream
- mode to transparent if the gzip magic header is not present; set s->err
- to Z_DATA_ERROR if the magic header is present but the rest of the header
- is incorrect.
- IN assertion: the stream s has already been created sucessfully;
- s->stream.avail_in is zero for the first time, but may be non-zero
- for concatenated .gz files.
-*/
-local void check_header(s)
- gz_stream *s;
-{
- int method; /* method byte */
- int flags; /* flags byte */
- uInt len;
- int c;
-
- /* Check the gzip magic header */
- for (len = 0; len < 2; len++) {
- c = get_byte(s);
- if (c != gz_magic[len]) {
- if (len != 0) s->stream.avail_in++, s->stream.next_in--;
- if (c != EOF) {
- s->stream.avail_in++, s->stream.next_in--;
- s->transparent = 1;
- }
- s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END;
- return;
- }
- }
- method = get_byte(s);
- flags = get_byte(s);
- if (method != Z_DEFLATED || (flags & RESERVED) != 0) {
- s->z_err = Z_DATA_ERROR;
- return;
- }
-
- /* Discard time, xflags and OS code: */
- for (len = 0; len < 6; len++) (void)get_byte(s);
-
- if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
- len = (uInt)get_byte(s);
- len += ((uInt)get_byte(s))<<8;
- /* len is garbage if EOF but the loop below will quit anyway */
- while (len-- != 0 && get_byte(s) != EOF) ;
- }
- if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
- while ((c = get_byte(s)) != 0 && c != EOF) ;
- }
- if ((flags & COMMENT) != 0) { /* skip the .gz file comment */
- while ((c = get_byte(s)) != 0 && c != EOF) ;
- }
- if ((flags & HEAD_CRC) != 0) { /* skip the header crc */
- for (len = 0; len < 2; len++) (void)get_byte(s);
- }
- s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
-}
-
- /* ===========================================================================
- * Cleanup then free the given gz_stream. Return a zlib error code.
- Try freeing in the reverse order of allocations.
- */
-local int destroy (s)
- gz_stream *s;
-{
- int err = Z_OK;
-
- if (!s) return Z_STREAM_ERROR;
-
- TRYFREE(s->msg);
-
- if (s->stream.state != NULL) {
- if (s->mode == 'w') {
-#ifdef NO_DEFLATE
- err = Z_STREAM_ERROR;
-#else
- err = deflateEnd(&(s->stream));
-#endif
- } else if (s->mode == 'r') {
- err = inflateEnd(&(s->stream));
- }
- }
- if (s->file != NULL && fclose(s->file)) {
-#ifdef ESPIPE
- if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
-#endif
- err = Z_ERRNO;
- }
- if (s->z_err < 0) err = s->z_err;
-
- TRYFREE(s->inbuf);
- TRYFREE(s->outbuf);
- TRYFREE(s->path);
- TRYFREE(s);
- return err;
-}
-
-/* ===========================================================================
- Reads the given number of uncompressed bytes from the compressed file.
- gzread returns the number of bytes actually read (0 for end of file).
-*/
-int ZEXPORT gzread (file, buf, len)
- gzFile file;
- voidp buf;
- unsigned len;
-{
- gz_stream *s = (gz_stream*)file;
- Bytef *start = (Bytef*)buf; /* starting point for crc computation */
- Byte *next_out; /* == stream.next_out but not forced far (for MSDOS) */
-
- if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
-
- if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
- if (s->z_err == Z_STREAM_END) return 0; /* EOF */
-
- next_out = (Byte*)buf;
- s->stream.next_out = (Bytef*)buf;
- s->stream.avail_out = len;
-
- while (s->stream.avail_out != 0) {
-
- if (s->transparent) {
- /* Copy first the lookahead bytes: */
- uInt n = s->stream.avail_in;
- if (n > s->stream.avail_out) n = s->stream.avail_out;
- if (n > 0) {
- zmemcpy(s->stream.next_out, s->stream.next_in, n);
- next_out += n;
- s->stream.next_out = next_out;
- s->stream.next_in += n;
- s->stream.avail_out -= n;
- s->stream.avail_in -= n;
- }
- if (s->stream.avail_out > 0) {
- s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out,
- s->file);
- }
- len -= s->stream.avail_out;
- s->stream.total_in += (uLong)len;
- s->stream.total_out += (uLong)len;
- if (len == 0) s->z_eof = 1;
- return (int)len;
- }
- if (s->stream.avail_in == 0 && !s->z_eof) {
-
- errno = 0;
- s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
- if (s->stream.avail_in == 0) {
- s->z_eof = 1;
- if (ferror(s->file)) {
- s->z_err = Z_ERRNO;
- break;
- }
- }
- s->stream.next_in = s->inbuf;
- }
- s->z_err = inflate(&(s->stream), Z_NO_FLUSH);
-
- if (s->z_err == Z_STREAM_END) {
- /* Check CRC and original size */
- s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
- start = s->stream.next_out;
-
- if (getLong(s) != s->crc) {
- s->z_err = Z_DATA_ERROR;
- } else {
- (void)getLong(s);
- /* The uncompressed length returned by above getlong() may
- * be different from s->stream.total_out) in case of
- * concatenated .gz files. Check for such files:
- */
- check_header(s);
- if (s->z_err == Z_OK) {
- uLong total_in = s->stream.total_in;
- uLong total_out = s->stream.total_out;
-
- inflateReset(&(s->stream));
- s->stream.total_in = total_in;
- s->stream.total_out = total_out;
- s->crc = crc32(0L, Z_NULL, 0);
- }
- }
- }
- if (s->z_err != Z_OK || s->z_eof) break;
- }
- s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
-
- return (int)(len - s->stream.avail_out);
-}
-
-
-/* ===========================================================================
- Reads one byte from the compressed file. gzgetc returns this byte
- or -1 in case of end of file or error.
-*/
-int ZEXPORT gzgetc(file)
- gzFile file;
-{
- unsigned char c;
-
- return gzread(file, &c, 1) == 1 ? c : -1;
-}
-
-
-/* ===========================================================================
- Reads bytes from the compressed file until len-1 characters are
- read, or a newline character is read and transferred to buf, or an
- end-of-file condition is encountered. The string is then terminated
- with a null character.
- gzgets returns buf, or Z_NULL in case of error.
-
- The current implementation is not optimized at all.
-*/
-char * ZEXPORT gzgets(file, buf, len)
- gzFile file;
- char *buf;
- int len;
-{
- char *b = buf;
- if (buf == Z_NULL || len <= 0) return Z_NULL;
-
- while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
- *buf = '\0';
- return b == buf && len > 0 ? Z_NULL : b;
-}
-
-
-#ifndef NO_DEFLATE
-/* ===========================================================================
- Writes the given number of uncompressed bytes into the compressed file.
- gzwrite returns the number of bytes actually written (0 in case of error).
-*/
-int ZEXPORT gzwrite (file, buf, len)
- gzFile file;
- const voidp buf;
- unsigned len;
-{
- gz_stream *s = (gz_stream*)file;
-
- if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
- s->stream.next_in = (Bytef*)buf;
- s->stream.avail_in = len;
-
- while (s->stream.avail_in != 0) {
-
- if (s->stream.avail_out == 0) {
-
- s->stream.next_out = s->outbuf;
- if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
- s->z_err = Z_ERRNO;
- break;
- }
- s->stream.avail_out = Z_BUFSIZE;
- }
- s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
- if (s->z_err != Z_OK) break;
- }
- s->crc = crc32(s->crc, (const Bytef *)buf, len);
-
- return (int)(len - s->stream.avail_in);
-}
-
-/* ===========================================================================
- Converts, formats, and writes the args to the compressed file under
- control of the format string, as in fprintf. gzprintf returns the number of
- uncompressed bytes actually written (0 in case of error).
-*/
-#ifdef STDC
-#include <stdarg.h>
-
-int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
-{
- char buf[Z_PRINTF_BUFSIZE];
- va_list va;
- int len;
-
- va_start(va, format);
-#ifdef HAS_vsnprintf
- (void)vsnprintf(buf, sizeof(buf), format, va);
-#else
- (void)vsprintf(buf, format, va);
-#endif
- va_end(va);
- len = strlen(buf); /* some *sprintf don't return the nb of bytes written */
- if (len <= 0) return 0;
-
- return gzwrite(file, buf, (unsigned)len);
-}
-#else /* not ANSI C */
-
-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
- a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
- gzFile file;
- const char *format;
- int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
- a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
- char buf[Z_PRINTF_BUFSIZE];
- int len;
-
-#ifdef HAS_snprintf
- snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#else
- sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
- a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#endif
- len = strlen(buf); /* old sprintf doesn't return the nb of bytes written */
- if (len <= 0) return 0;
-
- return gzwrite(file, buf, len);
-}
-#endif
-
-/* ===========================================================================
- Writes c, converted to an unsigned char, into the compressed file.
- gzputc returns the value that was written, or -1 in case of error.
-*/
-int ZEXPORT gzputc(file, c)
- gzFile file;
- int c;
-{
- unsigned char cc = (unsigned char) c; /* required for big endian systems */
-
- return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
-}
-
-
-/* ===========================================================================
- Writes the given null-terminated string to the compressed file, excluding
- the terminating null character.
- gzputs returns the number of characters written, or -1 in case of error.
-*/
-int ZEXPORT gzputs(file, s)
- gzFile file;
- const char *s;
-{
- return gzwrite(file, (char*)s, (unsigned)strlen(s));
-}
-
-
-/* ===========================================================================
- Flushes all pending output into the compressed file. The parameter
- flush is as in the deflate() function.
-*/
-local int do_flush (file, flush)
- gzFile file;
- int flush;
-{
- uInt len;
- int done = 0;
- gz_stream *s = (gz_stream*)file;
-
- if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
- s->stream.avail_in = 0; /* should be zero already anyway */
-
- for (;;) {
- len = Z_BUFSIZE - s->stream.avail_out;
-
- if (len != 0) {
- if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) {
- s->z_err = Z_ERRNO;
- return Z_ERRNO;
- }
- s->stream.next_out = s->outbuf;
- s->stream.avail_out = Z_BUFSIZE;
- }
- if (done) break;
- s->z_err = deflate(&(s->stream), flush);
-
- /* Ignore the second of two consecutive flushes: */
- if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
-
- /* deflate has finished flushing only when it hasn't used up
- * all the available space in the output buffer:
- */
- done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END);
-
- if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
- }
- return s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
-}
-
-int ZEXPORT gzflush (file, flush)
- gzFile file;
- int flush;
-{
- gz_stream *s = (gz_stream*)file;
- int err = do_flush (file, flush);
-
- if (err) return err;
- fflush(s->file);
- return s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
-}
-#endif /* NO_DEFLATE */
-
-/* ===========================================================================
- Sets the starting position for the next gzread or gzwrite on the given
- compressed file. The offset represents a number of bytes in the
- gzseek returns the resulting offset location as measured in bytes from
- the beginning of the uncompressed stream, or -1 in case of error.
- SEEK_END is not implemented, returns error.
- In this version of the library, gzseek can be extremely slow.
-*/
-z_off_t ZEXPORT gzseek (file, offset, whence)
- gzFile file;
- z_off_t offset;
- int whence;
-{
- gz_stream *s = (gz_stream*)file;
-
- if (s == NULL || whence == SEEK_END ||
- s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
- return -1L;
- }
-
- if (s->mode == 'w') {
-#ifdef NO_DEFLATE
- return -1L;
-#else
- if (whence == SEEK_SET) {
- offset -= s->stream.total_in;
- }
- if (offset < 0) return -1L;
-
- /* At this point, offset is the number of zero bytes to write. */
- if (s->inbuf == Z_NULL) {
- s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
- zmemzero(s->inbuf, Z_BUFSIZE);
- }
- while (offset > 0) {
- uInt size = Z_BUFSIZE;
- if (offset < Z_BUFSIZE) size = (uInt)offset;
-
- size = gzwrite(file, s->inbuf, size);
- if (size == 0) return -1L;
-
- offset -= size;
- }
- return (z_off_t)s->stream.total_in;
-#endif
- }
- /* Rest of function is for reading only */
-
- /* compute absolute position */
- if (whence == SEEK_CUR) {
- offset += s->stream.total_out;
- }
- if (offset < 0) return -1L;
-
- if (s->transparent) {
- /* map to fseek */
- s->stream.avail_in = 0;
- s->stream.next_in = s->inbuf;
- if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
-
- s->stream.total_in = s->stream.total_out = (uLong)offset;
- return offset;
- }
-
- /* For a negative seek, rewind and use positive seek */
- if ((uLong)offset >= s->stream.total_out) {
- offset -= s->stream.total_out;
- } else if (gzrewind(file) < 0) {
- return -1L;
- }
- /* offset is now the number of bytes to skip. */
-
- if (offset != 0 && s->outbuf == Z_NULL) {
- s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
- }
- while (offset > 0) {
- int size = Z_BUFSIZE;
- if (offset < Z_BUFSIZE) size = (int)offset;
-
- size = gzread(file, s->outbuf, (uInt)size);
- if (size <= 0) return -1L;
- offset -= size;
- }
- return (z_off_t)s->stream.total_out;
-}
-
-/* ===========================================================================
- Rewinds input file.
-*/
-int ZEXPORT gzrewind (file)
- gzFile file;
-{
- gz_stream *s = (gz_stream*)file;
-
- if (s == NULL || s->mode != 'r') return -1;
-
- s->z_err = Z_OK;
- s->z_eof = 0;
- s->stream.avail_in = 0;
- s->stream.next_in = s->inbuf;
- s->crc = crc32(0L, Z_NULL, 0);
-
- if (s->startpos == 0) { /* not a compressed file */
- rewind(s->file);
- return 0;
- }
-
- (void) inflateReset(&s->stream);
- return fseek(s->file, s->startpos, SEEK_SET);
-}
-
-/* ===========================================================================
- Returns the starting position for the next gzread or gzwrite on the
- given compressed file. This position represents a number of bytes in the
- uncompressed data stream.
-*/
-z_off_t ZEXPORT gztell (file)
- gzFile file;
-{
- return gzseek(file, 0L, SEEK_CUR);
-}
-
-/* ===========================================================================
- Returns 1 when EOF has previously been detected reading the given
- input stream, otherwise zero.
-*/
-int ZEXPORT gzeof (file)
- gzFile file;
-{
- gz_stream *s = (gz_stream*)file;
-
- return (s == NULL || s->mode != 'r') ? 0 : s->z_eof;
-}
-
-/* ===========================================================================
- Outputs a long in LSB order to the given file
-*/
-local void putLong (file, x)
- FILE *file;
- uLong x;
-{
- int n;
- for (n = 0; n < 4; n++) {
- fputc((int)(x & 0xff), file);
- x >>= 8;
- }
-}
-
-/* ===========================================================================
- Reads a long in LSB order from the given gz_stream. Sets z_err in case
- of error.
-*/
-local uLong getLong (s)
- gz_stream *s;
-{
- uLong x = (uLong)get_byte(s);
- int c;
-
- x += ((uLong)get_byte(s))<<8;
- x += ((uLong)get_byte(s))<<16;
- c = get_byte(s);
- if (c == EOF) s->z_err = Z_DATA_ERROR;
- x += ((uLong)c)<<24;
- return x;
-}
-
-/* ===========================================================================
- Flushes all pending output if necessary, closes the compressed file
- and deallocates all the (de)compression state.
-*/
-int ZEXPORT gzclose (file)
- gzFile file;
-{
- int err;
- gz_stream *s = (gz_stream*)file;
-
- if (s == NULL) return Z_STREAM_ERROR;
-
- if (s->mode == 'w') {
-#ifdef NO_DEFLATE
- return Z_STREAM_ERROR;
-#else
- err = do_flush (file, Z_FINISH);
- if (err != Z_OK) return destroy((gz_stream*)file);
-
- putLong (s->file, s->crc);
- putLong (s->file, s->stream.total_in);
-#endif
- }
- return destroy((gz_stream*)file);
-}
-
-/* ===========================================================================
- Returns the error message for the last error which occured on the
- given compressed file. errnum is set to zlib error number. If an
- error occured in the file system and not in the compression library,
- errnum is set to Z_ERRNO and the application may consult errno
- to get the exact error code.
-*/
-const char* ZEXPORT gzerror (file, errnum)
- gzFile file;
- int *errnum;
-{
- char *m;
- gz_stream *s = (gz_stream*)file;
-
- if (s == NULL) {
- *errnum = Z_STREAM_ERROR;
- return (const char*)ERR_MSG(Z_STREAM_ERROR);
- }
- *errnum = s->z_err;
- if (*errnum == Z_OK) return (const char*)"";
-
- m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
-
- if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
-
- TRYFREE(s->msg);
- s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
- strcpy(s->msg, s->path);
- strcat(s->msg, ": ");
- strcat(s->msg, m);
- return (const char*)s->msg;
-}
+++ /dev/null
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local const uInt border[] = { /* Order of the bit length code lengths */
- 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
- Notes beyond the 1.93a appnote.txt:
-
- 1. Distance pointers never point before the beginning of the output
- stream.
- 2. Distance pointers can point back across blocks, up to 32k away.
- 3. There is an implied maximum of 7 bits for the bit length table and
- 15 bits for the actual data.
- 4. If only one code exists, then it is encoded using one bit. (Zero
- would be more efficient, but perhaps a little confusing.) If two
- codes exist, they are coded using one bit each (0 and 1).
- 5. There is no way of sending zero distance codes--a dummy must be
- sent if there are none. (History: a pre 2.0 version of PKZIP would
- store blocks with no distance codes, but this was discovered to be
- too harsh a criterion.) Valid only for 1.93a. 2.04c does allow
- zero distance codes, which is sent as one code of zero bits in
- length.
- 6. There are up to 286 literal/length codes. Code 256 represents the
- end-of-block. Note however that the static length tree defines
- 288 codes just to fill out the Huffman codes. Codes 286 and 287
- cannot be used though, since there is no length base or extra bits
- defined for them. Similarily, there are up to 30 distance codes.
- However, static trees define 32 codes (all 5 bits) to fill out the
- Huffman codes, but the last two had better not show up in the data.
- 7. Unzip can check dynamic Huffman blocks for complete code sets.
- The exception is that a single code would not be complete (see #4).
- 8. The five bits following the block type is really the number of
- literal codes sent minus 257.
- 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
- (1+6+6). Therefore, to output three times the length, you output
- three codes (1+1+1), whereas to output four times the same length,
- you only need two codes (1+3). Hmm.
- 10. In the tree reconstruction algorithm, Code = Code + Increment
- only if BitLength(i) is not zero. (Pretty obvious.)
- 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19)
- 12. Note: length code 284 can represent 227-258, but length code 285
- really is 258. The last length deserves its own, short code
- since it gets used a lot in very redundant files. The length
- 258 is special since 258 - 3 (the min match length) is 255.
- 13. The literal/length and distance code bit lengths are read as a
- single stream of lengths. It is possible (and advantageous) for
- a repeat code (16, 17, or 18) to go across the boundary between
- the two sets of lengths.
- */
-
-
-void inflate_blocks_reset(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
- if (c != Z_NULL)
- *c = s->check;
- if (s->mode == BTREE || s->mode == DTREE)
- ZFREE(z, s->sub.trees.blens);
- if (s->mode == CODES)
- inflate_codes_free(s->sub.decode.codes, z);
- s->mode = TYPE;
- s->bitk = 0;
- s->bitb = 0;
- s->read = s->write = s->window;
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0);
- Tracev((stderr, "inflate: blocks reset\n"));
-}
-
-
-inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_streamp z;
-check_func c;
-uInt w;
-{
- inflate_blocks_statef *s;
-
- if ((s = (inflate_blocks_statef *)ZALLOC
- (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
- return s;
- if ((s->hufts =
- (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL)
- {
- ZFREE(z, s);
- return Z_NULL;
- }
- if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
- {
- ZFREE(z, s->hufts);
- ZFREE(z, s);
- return Z_NULL;
- }
- s->end = s->window + w;
- s->checkfn = c;
- s->mode = TYPE;
- Tracev((stderr, "inflate: blocks allocated\n"));
- inflate_blocks_reset(s, z, Z_NULL);
- return s;
-}
-
-
-int inflate_blocks(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
- uInt t; /* temporary storage */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input based on current state */
- while (1) switch (s->mode)
- {
- case TYPE:
- NEEDBITS(3)
- t = (uInt)b & 7;
- s->last = t & 1;
- switch (t >> 1)
- {
- case 0: /* stored */
- Tracev((stderr, "inflate: stored block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- t = k & 7; /* go to byte boundary */
- DUMPBITS(t)
- s->mode = LENS; /* get length of stored block */
- break;
- case 1: /* fixed */
- Tracev((stderr, "inflate: fixed codes block%s\n",
- s->last ? " (last)" : ""));
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
-
- inflate_trees_fixed(&bl, &bd, &tl, &td, z);
- s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
- if (s->sub.decode.codes == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- }
- DUMPBITS(3)
- s->mode = CODES;
- break;
- case 2: /* dynamic */
- Tracev((stderr, "inflate: dynamic codes block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- s->mode = TABLE;
- break;
- case 3: /* illegal */
- DUMPBITS(3)
- s->mode = BAD;
- z->msg = (char*)"invalid block type";
- r = Z_DATA_ERROR;
- LEAVE
- }
- break;
- case LENS:
- NEEDBITS(32)
- if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
- {
- s->mode = BAD;
- z->msg = (char*)"invalid stored block lengths";
- r = Z_DATA_ERROR;
- LEAVE
- }
- s->sub.left = (uInt)b & 0xffff;
- b = k = 0; /* dump bits */
- Tracev((stderr, "inflate: stored length %u\n", s->sub.left));
- s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
- break;
- case STORED:
- if (n == 0)
- LEAVE
- NEEDOUT
- t = s->sub.left;
- if (t > n) t = n;
- if (t > m) t = m;
- zmemcpy(q, p, t);
- p += t; n -= t;
- q += t; m -= t;
- if ((s->sub.left -= t) != 0)
- break;
- Tracev((stderr, "inflate: stored end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- s->mode = s->last ? DRY : TYPE;
- break;
- case TABLE:
- NEEDBITS(14)
- s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
- if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
- {
- s->mode = BAD;
- z->msg = (char*)"too many length or distance symbols";
- r = Z_DATA_ERROR;
- LEAVE
- }
-#endif
- t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
- if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- DUMPBITS(14)
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: table sizes ok\n"));
- s->mode = BTREE;
- case BTREE:
- while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
- {
- NEEDBITS(3)
- s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
- DUMPBITS(3)
- }
- while (s->sub.trees.index < 19)
- s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
- s->sub.trees.bb = 7;
- t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
- &s->sub.trees.tb, s->hufts, z);
- if (t != Z_OK)
- {
- ZFREE(z, s->sub.trees.blens);
- r = t;
- if (r == Z_DATA_ERROR)
- s->mode = BAD;
- LEAVE
- }
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: bits tree ok\n"));
- s->mode = DTREE;
- case DTREE:
- while (t = s->sub.trees.table,
- s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
- {
- inflate_huft *h;
- uInt i, j, c;
-
- t = s->sub.trees.bb;
- NEEDBITS(t)
- h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
- t = h->bits;
- c = h->base;
- if (c < 16)
- {
- DUMPBITS(t)
- s->sub.trees.blens[s->sub.trees.index++] = c;
- }
- else /* c == 16..18 */
- {
- i = c == 18 ? 7 : c - 14;
- j = c == 18 ? 11 : 3;
- NEEDBITS(t + i)
- DUMPBITS(t)
- j += (uInt)b & inflate_mask[i];
- DUMPBITS(i)
- i = s->sub.trees.index;
- t = s->sub.trees.table;
- if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
- (c == 16 && i < 1))
- {
- ZFREE(z, s->sub.trees.blens);
- s->mode = BAD;
- z->msg = (char*)"invalid bit length repeat";
- r = Z_DATA_ERROR;
- LEAVE
- }
- c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
- do {
- s->sub.trees.blens[i++] = c;
- } while (--j);
- s->sub.trees.index = i;
- }
- }
- s->sub.trees.tb = Z_NULL;
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
- inflate_codes_statef *c;
-
- bl = 9; /* must be <= 9 for lookahead assumptions */
- bd = 6; /* must be <= 9 for lookahead assumptions */
- t = s->sub.trees.table;
- t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
- s->sub.trees.blens, &bl, &bd, &tl, &td,
- s->hufts, z);
- ZFREE(z, s->sub.trees.blens);
- if (t != Z_OK)
- {
- if (t == (uInt)Z_DATA_ERROR)
- s->mode = BAD;
- r = t;
- LEAVE
- }
- Tracev((stderr, "inflate: trees ok\n"));
- if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- s->sub.decode.codes = c;
- }
- s->mode = CODES;
- case CODES:
- UPDATE
- if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
- return inflate_flush(s, z, r);
- r = Z_OK;
- inflate_codes_free(s->sub.decode.codes, z);
- LOAD
- Tracev((stderr, "inflate: codes end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- if (!s->last)
- {
- s->mode = TYPE;
- break;
- }
- s->mode = DRY;
- case DRY:
- FLUSH
- if (s->read != s->write)
- LEAVE
- s->mode = DONE;
- case DONE:
- r = Z_STREAM_END;
- LEAVE
- case BAD:
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-}
-
-
-int inflate_blocks_free(s, z)
-inflate_blocks_statef *s;
-z_streamp z;
-{
- inflate_blocks_reset(s, z, Z_NULL);
- ZFREE(z, s->window);
- ZFREE(z, s->hufts);
- ZFREE(z, s);
- Tracev((stderr, "inflate: blocks freed\n"));
- return Z_OK;
-}
-
-
-void inflate_set_dictionary(s, d, n)
-inflate_blocks_statef *s;
-const Bytef *d;
-uInt n;
-{
- zmemcpy(s->window, d, n);
- s->read = s->write = s->window + n;
-}
-
-
-/* Returns true if inflate is currently at the end of a block generated
- * by Z_SYNC_FLUSH or Z_FULL_FLUSH.
- * IN assertion: s != Z_NULL
- */
-int inflate_blocks_sync_point(s)
-inflate_blocks_statef *s;
-{
- return s->mode == LENS;
-}
+++ /dev/null
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-extern inflate_blocks_statef * inflate_blocks_new OF((
- z_streamp z,
- check_func c, /* check function */
- uInt w)); /* window size */
-
-extern int inflate_blocks OF((
- inflate_blocks_statef *,
- z_streamp ,
- int)); /* initial return code */
-
-extern void inflate_blocks_reset OF((
- inflate_blocks_statef *,
- z_streamp ,
- uLongf *)); /* check value on output */
-
-extern int inflate_blocks_free OF((
- inflate_blocks_statef *,
- z_streamp));
-
-extern void inflate_set_dictionary OF((
- inflate_blocks_statef *s,
- const Bytef *d, /* dictionary */
- uInt n)); /* dictionary length */
-
-extern int inflate_blocks_sync_point OF((
- inflate_blocks_statef *s));
+++ /dev/null
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
-#include "inffast.h"
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-typedef enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- START, /* x: set up for LEN */
- LEN, /* i: get length/literal/eob next */
- LENEXT, /* i: getting length extra (have base) */
- DIST, /* i: get distance next */
- DISTEXT, /* i: getting distance extra */
- COPY, /* o: copying bytes in window, waiting for space */
- LIT, /* o: got literal, waiting for output space */
- WASH, /* o: got eob, possibly still output waiting */
- END, /* x: got eob and all data flushed */
- BADCODE} /* x: got error */
-inflate_codes_mode;
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
- /* mode */
- inflate_codes_mode mode; /* current inflate_codes mode */
-
- /* mode dependent information */
- uInt len;
- union {
- struct {
- inflate_huft *tree; /* pointer into tree */
- uInt need; /* bits needed */
- } code; /* if LEN or DIST, where in tree */
- uInt lit; /* if LIT, literal */
- struct {
- uInt get; /* bits to get for extra */
- uInt dist; /* distance back to copy from */
- } copy; /* if EXT or COPY, where and how much */
- } sub; /* submode */
-
- /* mode independent information */
- Byte lbits; /* ltree bits decoded per branch */
- Byte dbits; /* dtree bits decoder per branch */
- inflate_huft *ltree; /* literal/length/eob tree */
- inflate_huft *dtree; /* distance tree */
-
-};
-
-
-inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-z_streamp z;
-{
- inflate_codes_statef *c;
-
- if ((c = (inflate_codes_statef *)
- ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
- {
- c->mode = START;
- c->lbits = (Byte)bl;
- c->dbits = (Byte)bd;
- c->ltree = tl;
- c->dtree = td;
- Tracev((stderr, "inflate: codes new\n"));
- }
- return c;
-}
-
-
-int inflate_codes(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
- uInt j; /* temporary storage */
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- Bytef *f; /* pointer to copy strings from */
- inflate_codes_statef *c = s->sub.decode.codes; /* codes state */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input and output based on current state */
- while (1) switch (c->mode)
- { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- case START: /* x: set up for LEN */
-#ifndef SLOW
- if (m >= 258 && n >= 10)
- {
- UPDATE
- r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
- LOAD
- if (r != Z_OK)
- {
- c->mode = r == Z_STREAM_END ? WASH : BADCODE;
- break;
- }
- }
-#endif /* !SLOW */
- c->sub.code.need = c->lbits;
- c->sub.code.tree = c->ltree;
- c->mode = LEN;
- case LEN: /* i: get length/literal/eob next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e == 0) /* literal */
- {
- c->sub.lit = t->base;
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", t->base));
- c->mode = LIT;
- break;
- }
- if (e & 16) /* length */
- {
- c->sub.copy.get = e & 15;
- c->len = t->base;
- c->mode = LENEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t + t->base;
- break;
- }
- if (e & 32) /* end of block */
- {
- Tracevv((stderr, "inflate: end of block\n"));
- c->mode = WASH;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = (char*)"invalid literal/length code";
- r = Z_DATA_ERROR;
- LEAVE
- case LENEXT: /* i: getting length extra (have base) */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->len += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- c->sub.code.need = c->dbits;
- c->sub.code.tree = c->dtree;
- Tracevv((stderr, "inflate: length %u\n", c->len));
- c->mode = DIST;
- case DIST: /* i: get distance next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e & 16) /* distance */
- {
- c->sub.copy.get = e & 15;
- c->sub.copy.dist = t->base;
- c->mode = DISTEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t + t->base;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = (char*)"invalid distance code";
- r = Z_DATA_ERROR;
- LEAVE
- case DISTEXT: /* i: getting distance extra */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->sub.copy.dist += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist));
- c->mode = COPY;
- case COPY: /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
- f = (uInt)(q - s->window) < c->sub.copy.dist ?
- s->end - (c->sub.copy.dist - (q - s->window)) :
- q - c->sub.copy.dist;
-#else
- f = q - c->sub.copy.dist;
- if ((uInt)(q - s->window) < c->sub.copy.dist)
- f = s->end - (c->sub.copy.dist - (uInt)(q - s->window));
-#endif
- while (c->len)
- {
- NEEDOUT
- OUTBYTE(*f++)
- if (f == s->end)
- f = s->window;
- c->len--;
- }
- c->mode = START;
- break;
- case LIT: /* o: got literal, waiting for output space */
- NEEDOUT
- OUTBYTE(c->sub.lit)
- c->mode = START;
- break;
- case WASH: /* o: got eob, possibly more output */
- if (k > 7) /* return unused byte, if any */
- {
- Assert(k < 16, "inflate_codes grabbed too many bytes")
- k -= 8;
- n++;
- p--; /* can always return one */
- }
- FLUSH
- if (s->read != s->write)
- LEAVE
- c->mode = END;
- case END:
- r = Z_STREAM_END;
- LEAVE
- case BADCODE: /* x: got error */
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-#ifdef NEED_DUMMY_RETURN
- return Z_STREAM_ERROR; /* Some dumb compilers complain without this */
-#endif
-}
-
-
-void inflate_codes_free(c, z)
-inflate_codes_statef *c;
-z_streamp z;
-{
- ZFREE(z, c);
- Tracev((stderr, "inflate: codes free\n"));
-}
+++ /dev/null
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-extern inflate_codes_statef *inflate_codes_new OF((
- uInt, uInt,
- inflate_huft *, inflate_huft *,
- z_streamp ));
-
-extern int inflate_codes OF((
- inflate_blocks_statef *,
- z_streamp ,
- int));
-
-extern void inflate_codes_free OF((
- inflate_codes_statef *,
- z_streamp ));
-
+++ /dev/null
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
-#include "inffast.h"
-
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;}
-
-/* Called with number of bytes left to write in window at least 258
- (the maximum string length) and number of input bytes available
- at least ten. The ten bytes are six bytes for the longest length/
- distance pair plus four bytes for overloading the bit buffer. */
-
-int inflate_fast(bl, bd, tl, td, s, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-inflate_blocks_statef *s;
-z_streamp z;
-{
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- uInt ml; /* mask for literal/length tree */
- uInt md; /* mask for distance tree */
- uInt c; /* bytes to copy */
- uInt d; /* distance back to copy from */
- Bytef *r; /* copy source pointer */
-
- /* load input, output, bit values */
- LOAD
-
- /* initialize masks */
- ml = inflate_mask[bl];
- md = inflate_mask[bd];
-
- /* do until not enough input or output space for fast loop */
- do { /* assume called with m >= 258 && n >= 10 */
- /* get literal/length code */
- GRABBITS(20) /* max bits for literal/length code */
- if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
- {
- DUMPBITS(t->bits)
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: * literal '%c'\n" :
- "inflate: * literal 0x%02x\n", t->base));
- *q++ = (Byte)t->base;
- m--;
- continue;
- }
- do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits for length */
- e &= 15;
- c = t->base + ((uInt)b & inflate_mask[e]);
- DUMPBITS(e)
- Tracevv((stderr, "inflate: * length %u\n", c));
-
- /* decode distance base of block to copy */
- GRABBITS(15); /* max bits for distance code */
- e = (t = td + ((uInt)b & md))->exop;
- do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits to add to distance base */
- e &= 15;
- GRABBITS(e) /* get extra bits (up to 13) */
- d = t->base + ((uInt)b & inflate_mask[e]);
- DUMPBITS(e)
- Tracevv((stderr, "inflate: * distance %u\n", d));
-
- /* do the copy */
- m -= c;
- if ((uInt)(q - s->window) >= d) /* offset before dest */
- { /* just copy */
- r = q - d;
- *q++ = *r++; c--; /* minimum count is three, */
- *q++ = *r++; c--; /* so unroll loop a little */
- }
- else /* else offset after destination */
- {
- e = d - (uInt)(q - s->window); /* bytes from offset to end */
- r = s->end - e; /* pointer to offset */
- if (c > e) /* if source crosses, */
- {
- c -= e; /* copy to end of window */
- do {
- *q++ = *r++;
- } while (--e);
- r = s->window; /* copy rest from start of window */
- }
- }
- do { /* copy all or what's left */
- *q++ = *r++;
- } while (--c);
- break;
- }
- else if ((e & 64) == 0)
- {
- t += t->base;
- e = (t += ((uInt)b & inflate_mask[e]))->exop;
- }
- else
- {
- z->msg = (char*)"invalid distance code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- break;
- }
- if ((e & 64) == 0)
- {
- t += t->base;
- if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0)
- {
- DUMPBITS(t->bits)
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: * literal '%c'\n" :
- "inflate: * literal 0x%02x\n", t->base));
- *q++ = (Byte)t->base;
- m--;
- break;
- }
- }
- else if (e & 32)
- {
- Tracevv((stderr, "inflate: * end of block\n"));
- UNGRAB
- UPDATE
- return Z_STREAM_END;
- }
- else
- {
- z->msg = (char*)"invalid literal/length code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- } while (m >= 258 && n >= 10);
-
- /* not enough input or output--restore pointers and return */
- UNGRAB
- UPDATE
- return Z_OK;
-}
+++ /dev/null
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-extern int inflate_fast OF((
- uInt,
- uInt,
- inflate_huft *,
- inflate_huft *,
- inflate_blocks_statef *,
- z_streamp ));
+++ /dev/null
-/* inffixed.h -- table for decoding fixed codes
- * Generated automatically by the maketree.c program
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-local uInt fixed_bl = 9;
-local uInt fixed_bd = 5;
-local inflate_huft fixed_tl[] = {
- {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
- {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
- {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
- {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
- {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
- {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
- {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
- {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
- {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
- {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
- {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
- {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
- {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
- {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
- {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
- {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
- {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
- {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
- {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
- {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
- {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
- {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
- {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
- {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
- {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
- {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
- {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
- {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
- {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
- {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
- {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
- {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
- {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
- {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
- {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
- {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
- {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
- {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
- {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
- {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
- {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
- {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
- {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
- {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
- {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
- {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
- {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
- {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
- {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
- {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
- {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
- {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
- {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
- {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
- {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
- {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
- {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
- {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
- {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
- {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
- {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
- {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
- {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
- {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
- {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
- {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
- {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
- {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
- {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
- {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
- {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
- {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
- {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
- {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
- {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
- {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
- {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
- {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
- {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
- {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
- {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
- {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
- {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
- {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
- {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
- {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
- {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
- {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
- {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
- {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
- {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
- {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
- {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
- {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
- {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
- {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
- {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
- {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
- {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
- {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
- {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
- {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
- {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
- {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
- {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
- {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
- {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
- {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
- {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
- {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
- {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
- {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
- {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
- {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
- {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
- {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
- {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
- {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
- {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
- {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
- {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
- {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
- {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
- {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
- {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
- {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
- {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
- {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
- };
-local inflate_huft fixed_td[] = {
- {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
- {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
- {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
- {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
- {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
- {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
- {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
- {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
- };
+++ /dev/null
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "infblock.h"
-
-struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
-
-typedef enum {
- METHOD, /* waiting for method byte */
- FLAG, /* waiting for flag byte */
- DICT4, /* four dictionary check bytes to go */
- DICT3, /* three dictionary check bytes to go */
- DICT2, /* two dictionary check bytes to go */
- DICT1, /* one dictionary check byte to go */
- DICT0, /* waiting for inflateSetDictionary */
- BLOCKS, /* decompressing blocks */
- CHECK4, /* four check bytes to go */
- CHECK3, /* three check bytes to go */
- CHECK2, /* two check bytes to go */
- CHECK1, /* one check byte to go */
- DONE, /* finished check, done */
- BAD} /* got an error--stay here */
-inflate_mode;
-
-/* inflate private state */
-struct internal_state {
-
- /* mode */
- inflate_mode mode; /* current inflate mode */
-
- /* mode dependent information */
- union {
- uInt method; /* if FLAGS, method byte */
- struct {
- uLong was; /* computed check value */
- uLong need; /* stream check value */
- } check; /* if CHECK, check values to compare */
- uInt marker; /* if BAD, inflateSync's marker bytes count */
- } sub; /* submode */
-
- /* mode independent information */
- int nowrap; /* flag for no wrapper */
- uInt wbits; /* log2(window size) (8..15, defaults to 15) */
- inflate_blocks_statef
- *blocks; /* current inflate_blocks state */
-
-};
-
-
-int ZEXPORT inflateReset(z)
-z_streamp z;
-{
- if (z == Z_NULL || z->state == Z_NULL)
- return Z_STREAM_ERROR;
- z->total_in = z->total_out = 0;
- z->msg = Z_NULL;
- z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
- inflate_blocks_reset(z->state->blocks, z, Z_NULL);
- Tracev((stderr, "inflate: reset\n"));
- return Z_OK;
-}
-
-
-int ZEXPORT inflateEnd(z)
-z_streamp z;
-{
- if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
- return Z_STREAM_ERROR;
- if (z->state->blocks != Z_NULL)
- inflate_blocks_free(z->state->blocks, z);
- ZFREE(z, z->state);
- z->state = Z_NULL;
- Tracev((stderr, "inflate: end\n"));
- return Z_OK;
-}
-
-
-int ZEXPORT inflateInit2_(z, w, version, stream_size)
-z_streamp z;
-int w;
-const char *version;
-int stream_size;
-{
- if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
- stream_size != sizeof(z_stream))
- return Z_VERSION_ERROR;
-
- /* initialize state */
- if (z == Z_NULL)
- return Z_STREAM_ERROR;
- z->msg = Z_NULL;
- if (z->zalloc == Z_NULL)
- {
- z->zalloc = zcalloc;
- z->opaque = (voidpf)0;
- }
- if (z->zfree == Z_NULL) z->zfree = zcfree;
- if ((z->state = (struct internal_state FAR *)
- ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
- return Z_MEM_ERROR;
- z->state->blocks = Z_NULL;
-
- /* handle undocumented nowrap option (no zlib header or check) */
- z->state->nowrap = 0;
- if (w < 0)
- {
- w = - w;
- z->state->nowrap = 1;
- }
-
- /* set window size */
- if (w < 8 || w > 15)
- {
- inflateEnd(z);
- return Z_STREAM_ERROR;
- }
- z->state->wbits = (uInt)w;
-
- /* create inflate_blocks state */
- if ((z->state->blocks =
- inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
- == Z_NULL)
- {
- inflateEnd(z);
- return Z_MEM_ERROR;
- }
- Tracev((stderr, "inflate: allocated\n"));
-
- /* reset state */
- inflateReset(z);
- return Z_OK;
-}
-
-
-int ZEXPORT inflateInit_(z, version, stream_size)
-z_streamp z;
-const char *version;
-int stream_size;
-{
- return inflateInit2_(z, DEF_WBITS, version, stream_size);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)return r;r=f;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int ZEXPORT inflate(z, f)
-z_streamp z;
-int f;
-{
- int r;
- uInt b;
-
- if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL)
- return Z_STREAM_ERROR;
- f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;
- r = Z_BUF_ERROR;
- while (1) switch (z->state->mode)
- {
- case METHOD:
- NEEDBYTE
- if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
- {
- z->state->mode = BAD;
- z->msg = (char*)"unknown compression method";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
- {
- z->state->mode = BAD;
- z->msg = (char*)"invalid window size";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- z->state->mode = FLAG;
- case FLAG:
- NEEDBYTE
- b = NEXTBYTE;
- if (((z->state->sub.method << 8) + b) % 31)
- {
- z->state->mode = BAD;
- z->msg = (char*)"incorrect header check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- Tracev((stderr, "inflate: zlib header ok\n"));
- if (!(b & PRESET_DICT))
- {
- z->state->mode = BLOCKS;
- break;
- }
- z->state->mode = DICT4;
- case DICT4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = DICT3;
- case DICT3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = DICT2;
- case DICT2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = DICT1;
- case DICT1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
- z->adler = z->state->sub.check.need;
- z->state->mode = DICT0;
- return Z_NEED_DICT;
- case DICT0:
- z->state->mode = BAD;
- z->msg = (char*)"need dictionary";
- z->state->sub.marker = 0; /* can try inflateSync */
- return Z_STREAM_ERROR;
- case BLOCKS:
- r = inflate_blocks(z->state->blocks, z, r);
- if (r == Z_DATA_ERROR)
- {
- z->state->mode = BAD;
- z->state->sub.marker = 0; /* can try inflateSync */
- break;
- }
- if (r == Z_OK)
- r = f;
- if (r != Z_STREAM_END)
- return r;
- r = f;
- inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
- if (z->state->nowrap)
- {
- z->state->mode = DONE;
- break;
- }
- z->state->mode = CHECK4;
- case CHECK4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = CHECK3;
- case CHECK3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = CHECK2;
- case CHECK2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = CHECK1;
- case CHECK1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
-
- if (z->state->sub.check.was != z->state->sub.check.need)
- {
- z->state->mode = BAD;
- z->msg = (char*)"incorrect data check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- Tracev((stderr, "inflate: zlib check ok\n"));
- z->state->mode = DONE;
- case DONE:
- return Z_STREAM_END;
- case BAD:
- return Z_DATA_ERROR;
- default:
- return Z_STREAM_ERROR;
- }
-#ifdef NEED_DUMMY_RETURN
- return Z_STREAM_ERROR; /* Some dumb compilers complain without this */
-#endif
-}
-
-
-int ZEXPORT inflateSetDictionary(z, dictionary, dictLength)
-z_streamp z;
-const Bytef *dictionary;
-uInt dictLength;
-{
- uInt length = dictLength;
-
- if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0)
- return Z_STREAM_ERROR;
-
- if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR;
- z->adler = 1L;
-
- if (length >= ((uInt)1<<z->state->wbits))
- {
- length = (1<<z->state->wbits)-1;
- dictionary += dictLength - length;
- }
- inflate_set_dictionary(z->state->blocks, dictionary, length);
- z->state->mode = BLOCKS;
- return Z_OK;
-}
-
-
-int ZEXPORT inflateSync(z)
-z_streamp z;
-{
- uInt n; /* number of bytes to look at */
- Bytef *p; /* pointer to bytes */
- uInt m; /* number of marker bytes found in a row */
- uLong r, w; /* temporaries to save total_in and total_out */
-
- /* set up */
- if (z == Z_NULL || z->state == Z_NULL)
- return Z_STREAM_ERROR;
- if (z->state->mode != BAD)
- {
- z->state->mode = BAD;
- z->state->sub.marker = 0;
- }
- if ((n = z->avail_in) == 0)
- return Z_BUF_ERROR;
- p = z->next_in;
- m = z->state->sub.marker;
-
- /* search */
- while (n && m < 4)
- {
- static const Byte mark[4] = {0, 0, 0xff, 0xff};
- if (*p == mark[m])
- m++;
- else if (*p)
- m = 0;
- else
- m = 4 - m;
- p++, n--;
- }
-
- /* restore */
- z->total_in += p - z->next_in;
- z->next_in = p;
- z->avail_in = n;
- z->state->sub.marker = m;
-
- /* return no joy or set up to restart on a new block */
- if (m != 4)
- return Z_DATA_ERROR;
- r = z->total_in; w = z->total_out;
- inflateReset(z);
- z->total_in = r; z->total_out = w;
- z->state->mode = BLOCKS;
- return Z_OK;
-}
-
-
-/* Returns true if inflate is currently at the end of a block generated
- * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
- * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH
- * but removes the length bytes of the resulting empty stored block. When
- * decompressing, PPP checks that at the end of input packet, inflate is
- * waiting for these length bytes.
- */
-int ZEXPORT inflateSyncPoint(z)
-z_streamp z;
-{
- if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL)
- return Z_STREAM_ERROR;
- return inflate_blocks_sync_point(z->state->blocks);
-}
+++ /dev/null
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-
-#if !defined(BUILDFIXED) && !defined(STDC)
-# define BUILDFIXED /* non ANSI compilers may not accept inffixed.h */
-#endif
-
-const char inflate_copyright[] =
- " inflate 1.1.3 Copyright 1995-1998 Mark Adler ";
-/*
- If you use the zlib library in a product, an acknowledgment is welcome
- in the documentation of your product. If for some reason you cannot
- include such an acknowledgment, I would appreciate that you keep this
- copyright string in the executable of your product.
- */
-struct internal_state {int dummy;}; /* for buggy compilers */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
- uIntf *, /* code lengths in bits */
- uInt, /* number of codes */
- uInt, /* number of "simple" codes */
- const uIntf *, /* list of base values for non-simple codes */
- const uIntf *, /* list of extra bits for non-simple codes */
- inflate_huft * FAR*,/* result: starting table */
- uIntf *, /* maximum lookup bits (returns actual) */
- inflate_huft *, /* space for trees */
- uInt *, /* hufts used in space */
- uIntf * )); /* space for values */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
- 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
- 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
- /* see note #13 above about 258 */
-local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
- 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
-local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
- 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
- 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
- 8193, 12289, 16385, 24577};
-local const uInt cpdext[30] = { /* Extra bits for distance codes */
- 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
- 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
- 12, 12, 13, 13};
-
-/*
- Huffman code decoding is performed using a multi-level table lookup.
- The fastest way to decode is to simply build a lookup table whose
- size is determined by the longest code. However, the time it takes
- to build this table can also be a factor if the data being decoded
- is not very long. The most common codes are necessarily the
- shortest codes, so those codes dominate the decoding time, and hence
- the speed. The idea is you can have a shorter table that decodes the
- shorter, more probable codes, and then point to subsidiary tables for
- the longer codes. The time it costs to decode the longer codes is
- then traded against the time it takes to make longer tables.
-
- This results of this trade are in the variables lbits and dbits
- below. lbits is the number of bits the first level table for literal/
- length codes can decode in one step, and dbits is the same thing for
- the distance codes. Subsequent tables are also less than or equal to
- those sizes. These values may be adjusted either when all of the
- codes are shorter than that, in which case the longest code length in
- bits is used, or when the shortest code is *longer* than the requested
- table size, in which case the length of the shortest code in bits is
- used.
-
- There are two different values for the two tables, since they code a
- different number of possibilities each. The literal/length table
- codes 286 possible values, or in a flat code, a little over eight
- bits. The distance table codes 30 possible values, or a little less
- than five bits, flat. The optimum values for speed end up being
- about one bit more than those, so lbits is 8+1 and dbits is 5+1.
- The optimum values may differ though from machine to machine, and
- possibly even between compilers. Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15 /* maximum bit length of any code */
-
-local int huft_build(b, n, s, d, e, t, m, hp, hn, v)
-uIntf *b; /* code lengths in bits (all assumed <= BMAX) */
-uInt n; /* number of codes (assumed <= 288) */
-uInt s; /* number of simple-valued codes (0..s-1) */
-const uIntf *d; /* list of base values for non-simple codes */
-const uIntf *e; /* list of extra bits for non-simple codes */
-inflate_huft * FAR *t; /* result: starting table */
-uIntf *m; /* maximum lookup bits, returns actual */
-inflate_huft *hp; /* space for trees */
-uInt *hn; /* hufts used in space */
-uIntf *v; /* working area: values in order of bit length */
-/* Given a list of code lengths and a maximum table size, make a set of
- tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR
- if the given code set is incomplete (the tables are still built in this
- case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of
- lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
- uInt a; /* counter for codes of length k */
- uInt c[BMAX+1]; /* bit length count table */
- uInt f; /* i repeats in table every f entries */
- int g; /* maximum code length */
- int h; /* table level */
- register uInt i; /* counter, current code */
- register uInt j; /* counter */
- register int k; /* number of bits in current code */
- int l; /* bits per table (returned in m) */
- uInt mask; /* (1 << w) - 1, to avoid cc -O bug on HP */
- register uIntf *p; /* pointer into c[], b[], or v[] */
- inflate_huft *q; /* points to current table */
- struct inflate_huft_s r; /* table entry for structure assignment */
- inflate_huft *u[BMAX]; /* table stack */
- register int w; /* bits before this table == (l * h) */
- uInt x[BMAX+1]; /* bit offsets, then code stack */
- uIntf *xp; /* pointer into x */
- int y; /* number of dummy codes added */
- uInt z; /* number of entries in current table */
-
-
- /* Generate counts for each bit length */
- p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
- C4 /* clear c[]--assume BMAX+1 is 16 */
- p = b; i = n;
- do {
- c[*p++]++; /* assume all entries <= BMAX */
- } while (--i);
- if (c[0] == n) /* null input--all zero length codes */
- {
- *t = (inflate_huft *)Z_NULL;
- *m = 0;
- return Z_OK;
- }
-
-
- /* Find minimum and maximum length, bound *m by those */
- l = *m;
- for (j = 1; j <= BMAX; j++)
- if (c[j])
- break;
- k = j; /* minimum code length */
- if ((uInt)l < j)
- l = j;
- for (i = BMAX; i; i--)
- if (c[i])
- break;
- g = i; /* maximum code length */
- if ((uInt)l > i)
- l = i;
- *m = l;
-
-
- /* Adjust last length count to fill out codes, if needed */
- for (y = 1 << j; j < i; j++, y <<= 1)
- if ((y -= c[j]) < 0)
- return Z_DATA_ERROR;
- if ((y -= c[i]) < 0)
- return Z_DATA_ERROR;
- c[i] += y;
-
-
- /* Generate starting offsets into the value table for each length */
- x[1] = j = 0;
- p = c + 1; xp = x + 2;
- while (--i) { /* note that i == g from above */
- *xp++ = (j += *p++);
- }
-
-
- /* Make a table of values in order of bit lengths */
- p = b; i = 0;
- do {
- if ((j = *p++) != 0)
- v[x[j]++] = i;
- } while (++i < n);
- n = x[g]; /* set n to length of v */
-
-
- /* Generate the Huffman codes and for each, make the table entries */
- x[0] = i = 0; /* first Huffman code is zero */
- p = v; /* grab values in bit order */
- h = -1; /* no tables yet--level -1 */
- w = -l; /* bits decoded == (l * h) */
- u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */
- q = (inflate_huft *)Z_NULL; /* ditto */
- z = 0; /* ditto */
-
- /* go through the bit lengths (k already is bits in shortest code) */
- for (; k <= g; k++)
- {
- a = c[k];
- while (a--)
- {
- /* here i is the Huffman code of length k bits for value *p */
- /* make tables up to required level */
- while (k > w + l)
- {
- h++;
- w += l; /* previous table always l bits */
-
- /* compute minimum size table less than or equal to l bits */
- z = g - w;
- z = z > (uInt)l ? l : z; /* table size upper limit */
- if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */
- { /* too few codes for k-w bit table */
- f -= a + 1; /* deduct codes from patterns left */
- xp = c + k;
- if (j < z)
- while (++j < z) /* try smaller tables up to z bits */
- {
- if ((f <<= 1) <= *++xp)
- break; /* enough codes to use up j bits */
- f -= *xp; /* else deduct codes from patterns */
- }
- }
- z = 1 << j; /* table entries for j-bit table */
-
- /* allocate new table */
- if (*hn + z > MANY) /* (note: doesn't matter for fixed) */
- return Z_MEM_ERROR; /* not enough memory */
- u[h] = q = hp + *hn;
- *hn += z;
-
- /* connect to last table, if there is one */
- if (h)
- {
- x[h] = i; /* save pattern for backing up */
- r.bits = (Byte)l; /* bits to dump before this table */
- r.exop = (Byte)j; /* bits in this table */
- j = i >> (w - l);
- r.base = (uInt)(q - u[h-1] - j); /* offset to this table */
- u[h-1][j] = r; /* connect to last table */
- }
- else
- *t = q; /* first table is returned result */
- }
-
- /* set up table entry in r */
- r.bits = (Byte)(k - w);
- if (p >= v + n)
- r.exop = 128 + 64; /* out of values--invalid code */
- else if (*p < s)
- {
- r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */
- r.base = *p++; /* simple code is just the value */
- }
- else
- {
- r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
- r.base = d[*p++ - s];
- }
-
- /* fill code-like entries with r */
- f = 1 << (k - w);
- for (j = i >> w; j < z; j += f)
- q[j] = r;
-
- /* backwards increment the k-bit code i */
- for (j = 1 << (k - 1); i & j; j >>= 1)
- i ^= j;
- i ^= j;
-
- /* backup over finished tables */
- mask = (1 << w) - 1; /* needed on HP, cc -O bug */
- while ((i & mask) != x[h])
- {
- h--; /* don't need to update q */
- w -= l;
- mask = (1 << w) - 1;
- }
- }
- }
-
-
- /* Return Z_BUF_ERROR if we were given an incomplete table */
- return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-int inflate_trees_bits(c, bb, tb, hp, z)
-uIntf *c; /* 19 code lengths */
-uIntf *bb; /* bits tree desired/actual depth */
-inflate_huft * FAR *tb; /* bits tree result */
-inflate_huft *hp; /* space for trees */
-z_streamp z; /* for messages */
-{
- int r;
- uInt hn = 0; /* hufts used in space */
- uIntf *v; /* work area for huft_build */
-
- if ((v = (uIntf*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL)
- return Z_MEM_ERROR;
- r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL,
- tb, bb, hp, &hn, v);
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed dynamic bit lengths tree";
- else if (r == Z_BUF_ERROR || *bb == 0)
- {
- z->msg = (char*)"incomplete dynamic bit lengths tree";
- r = Z_DATA_ERROR;
- }
- ZFREE(z, v);
- return r;
-}
-
-
-int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, hp, z)
-uInt nl; /* number of literal/length codes */
-uInt nd; /* number of distance codes */
-uIntf *c; /* that many (total) code lengths */
-uIntf *bl; /* literal desired/actual bit depth */
-uIntf *bd; /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-inflate_huft *hp; /* space for trees */
-z_streamp z; /* for messages */
-{
- int r;
- uInt hn = 0; /* hufts used in space */
- uIntf *v; /* work area for huft_build */
-
- /* allocate work area */
- if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
- return Z_MEM_ERROR;
-
- /* build literal/length tree */
- r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);
- if (r != Z_OK || *bl == 0)
- {
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed literal/length tree";
- else if (r != Z_MEM_ERROR)
- {
- z->msg = (char*)"incomplete literal/length tree";
- r = Z_DATA_ERROR;
- }
- ZFREE(z, v);
- return r;
- }
-
- /* build distance tree */
- r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);
- if (r != Z_OK || (*bd == 0 && nl > 257))
- {
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed distance tree";
- else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
- r = Z_OK;
- }
-#else
- z->msg = (char*)"incomplete distance tree";
- r = Z_DATA_ERROR;
- }
- else if (r != Z_MEM_ERROR)
- {
- z->msg = (char*)"empty distance tree with lengths";
- r = Z_DATA_ERROR;
- }
- ZFREE(z, v);
- return r;
-#endif
- }
-
- /* done */
- ZFREE(z, v);
- return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-#ifdef BUILDFIXED
-local int fixed_built = 0;
-#define FIXEDH 544 /* number of hufts used by fixed tables */
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-#else
-#include "inffixed.h"
-#endif
-
-
-int inflate_trees_fixed(bl, bd, tl, td, z)
-uIntf *bl; /* literal desired/actual bit depth */
-uIntf *bd; /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-z_streamp z; /* for memory allocation */
-{
-#ifdef BUILDFIXED
- /* build fixed tables if not already */
- if (!fixed_built)
- {
- int k; /* temporary variable */
- uInt f = 0; /* number of hufts used in fixed_mem */
- uIntf *c; /* length list for huft_build */
- uIntf *v; /* work area for huft_build */
-
- /* allocate memory */
- if ((c = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
- return Z_MEM_ERROR;
- if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
- {
- ZFREE(z, c);
- return Z_MEM_ERROR;
- }
-
- /* literal table */
- for (k = 0; k < 144; k++)
- c[k] = 8;
- for (; k < 256; k++)
- c[k] = 9;
- for (; k < 280; k++)
- c[k] = 7;
- for (; k < 288; k++)
- c[k] = 8;
- fixed_bl = 9;
- huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl,
- fixed_mem, &f, v);
-
- /* distance table */
- for (k = 0; k < 30; k++)
- c[k] = 5;
- fixed_bd = 5;
- huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd,
- fixed_mem, &f, v);
-
- /* done */
- ZFREE(z, v);
- ZFREE(z, c);
- fixed_built = 1;
- }
-#endif
- *bl = fixed_bl;
- *bd = fixed_bd;
- *tl = fixed_tl;
- *td = fixed_td;
- return Z_OK;
-}
+++ /dev/null
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
- that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
- union {
- struct {
- Byte Exop; /* number of extra bits or operation */
- Byte Bits; /* number of bits in this code or subcode */
- } what;
- uInt pad; /* pad structure to a power of 2 (4 bytes for */
- } word; /* 16-bit, 8 bytes for 32-bit int's) */
- uInt base; /* literal, length base, distance base,
- or table offset */
-};
-
-/* Maximum size of dynamic tree. The maximum found in a long but non-
- exhaustive search was 1004 huft structures (850 for length/literals
- and 154 for distances, the latter actually the result of an
- exhaustive search). The actual maximum is not known, but the
- value below is more than safe. */
-#define MANY 1440
-
-extern int inflate_trees_bits OF((
- uIntf *, /* 19 code lengths */
- uIntf *, /* bits tree desired/actual depth */
- inflate_huft * FAR *, /* bits tree result */
- inflate_huft *, /* space for trees */
- z_streamp)); /* for messages */
-
-extern int inflate_trees_dynamic OF((
- uInt, /* number of literal/length codes */
- uInt, /* number of distance codes */
- uIntf *, /* that many (total) code lengths */
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- inflate_huft * FAR *, /* literal/length tree result */
- inflate_huft * FAR *, /* distance tree result */
- inflate_huft *, /* space for trees */
- z_streamp)); /* for messages */
-
-extern int inflate_trees_fixed OF((
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- inflate_huft * FAR *, /* literal/length tree result */
- inflate_huft * FAR *, /* distance tree result */
- z_streamp)); /* for memory allocation */
+++ /dev/null
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-
-/* And'ing with mask[n] masks the lower n bits */
-uInt inflate_mask[17] = {
- 0x0000,
- 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
- 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-
-/* copy as much as possible from the sliding window to the output area */
-int inflate_flush(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
- uInt n;
- Bytef *p;
- Bytef *q;
-
- /* local copies of source and destination pointers */
- p = z->next_out;
- q = s->read;
-
- /* compute number of bytes to copy as far as end of window */
- n = (uInt)((q <= s->write ? s->write : s->end) - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy as far as end of window */
- zmemcpy(p, q, n);
- p += n;
- q += n;
-
- /* see if more to copy at beginning of window */
- if (q == s->end)
- {
- /* wrap pointers */
- q = s->window;
- if (s->write == s->end)
- s->write = s->window;
-
- /* compute bytes to copy */
- n = (uInt)(s->write - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy */
- zmemcpy(p, q, n);
- p += n;
- q += n;
- }
-
- /* update pointers */
- z->next_out = p;
- s->read = q;
-
- /* done */
- return r;
-}
+++ /dev/null
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFUTIL_H
-#define _INFUTIL_H
-
-typedef enum {
- TYPE, /* get type bits (3, including end bit) */
- LENS, /* get lengths for stored */
- STORED, /* processing stored block */
- TABLE, /* get table lengths */
- BTREE, /* get bit lengths tree for a dynamic block */
- DTREE, /* get length, distance trees for a dynamic block */
- CODES, /* processing fixed or dynamic block */
- DRY, /* output remaining window bytes */
- DONE, /* finished last block, done */
- BAD} /* got a data error--stuck here */
-inflate_block_mode;
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
- /* mode */
- inflate_block_mode mode; /* current inflate_block mode */
-
- /* mode dependent information */
- union {
- uInt left; /* if STORED, bytes left to copy */
- struct {
- uInt table; /* table lengths (14 bits) */
- uInt index; /* index into blens (or border) */
- uIntf *blens; /* bit lengths of codes */
- uInt bb; /* bit length tree depth */
- inflate_huft *tb; /* bit length decoding tree */
- } trees; /* if DTREE, decoding info for trees */
- struct {
- inflate_codes_statef
- *codes;
- } decode; /* if CODES, current state */
- } sub; /* submode */
- uInt last; /* true if this block is the last block */
-
- /* mode independent information */
- uInt bitk; /* bits in bit buffer */
- uLong bitb; /* bit buffer */
- inflate_huft *hufts; /* single malloc for tree space */
- Bytef *window; /* sliding window */
- Bytef *end; /* one byte after sliding window */
- Bytef *read; /* window read pointer */
- Bytef *write; /* window write pointer */
- check_func checkfn; /* check function */
- uLong check; /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/* update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/* get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/* output bytes */
-#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/* load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
-extern uInt inflate_mask[17];
-
-/* copy as much as possible from the sliding window to the output area */
-extern int inflate_flush OF((
- inflate_blocks_statef *,
- z_streamp ,
- int));
-
-struct internal_state {int dummy;}; /* for buggy compilers */
-
-#endif
+++ /dev/null
-/* maketree.c -- make inffixed.h table for decoding fixed codes
- * Copyright (C) 1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* This program is included in the distribution for completeness.
- You do not need to compile or run this program since inffixed.h
- is already included in the distribution. To use this program
- you need to compile zlib with BUILDFIXED defined and then compile
- and link this program with the zlib library. Then the output of
- this program can be piped to inffixed.h. */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include "zutil.h"
-#include "inftrees.h"
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* generate initialization table for an inflate_huft structure array */
-void maketree(uInt b, inflate_huft *t)
-{
- int i, e;
-
- i = 0;
- while (1)
- {
- e = t[i].exop;
- if (e && (e & (16+64)) == 0) /* table pointer */
- {
- fprintf(stderr, "maketree: cannot initialize sub-tables!\n");
- exit(1);
- }
- if (i % 4 == 0)
- printf("\n ");
- printf(" {{{%u,%u}},%u}", t[i].exop, t[i].bits, t[i].base);
- if (++i == (1<<b))
- break;
- putchar(',');
- }
- puts("");
-}
-
-/* create the fixed tables in C initialization syntax */
-void main(void)
-{
- int r;
- uInt bl, bd;
- inflate_huft *tl, *td;
- z_stream z;
-
- z.zalloc = zcalloc;
- z.opaque = (voidpf)0;
- z.zfree = zcfree;
- r = inflate_trees_fixed(&bl, &bd, &tl, &td, &z);
- if (r)
- {
- fprintf(stderr, "inflate_trees_fixed error %d\n", r);
- return;
- }
- puts("/* inffixed.h -- table for decoding fixed codes");
- puts(" * Generated automatically by the maketree.c program");
- puts(" */");
- puts("");
- puts("/* WARNING: this file should *not* be used by applications. It is");
- puts(" part of the implementation of the compression library and is");
- puts(" subject to change. Applications should only use zlib.h.");
- puts(" */");
- puts("");
- printf("local uInt fixed_bl = %d;\n", bl);
- printf("local uInt fixed_bd = %d;\n", bd);
- printf("local inflate_huft fixed_tl[] = {");
- maketree(bl, tl);
- puts(" };");
- printf("local inflate_huft fixed_td[] = {");
- maketree(bd, td);
- puts(" };");
-}
+++ /dev/null
-/* minigzip.c -- simulate gzip using the zlib compression library
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * minigzip is a minimal implementation of the gzip utility. This is
- * only an example of using zlib and isn't meant to replace the
- * full-featured gzip. No attempt is made to deal with file systems
- * limiting names to 14 or 8+3 characters, etc... Error checking is
- * very limited. So use minigzip only for testing; use gzip for the
- * real thing. On MSDOS, use only on file names without extension
- * or in pipe mode.
- */
-
-/* @(#) $Id$ */
-
-#include <stdio.h>
-#include "zlib.h"
-
-#ifdef STDC
-# include <string.h>
-# include <stdlib.h>
-#else
- extern void exit OF((int));
-#endif
-
-#ifdef USE_MMAP
-# include <sys/types.h>
-# include <sys/mman.h>
-# include <sys/stat.h>
-#endif
-
-#if defined(MSDOS) || defined(OS2) || defined(WIN32)
-# include <fcntl.h>
-# include <io.h>
-# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
-#else
-# define SET_BINARY_MODE(file)
-#endif
-
-#ifdef VMS
-# define unlink delete
-# define GZ_SUFFIX "-gz"
-#endif
-#ifdef RISCOS
-# define unlink remove
-# define GZ_SUFFIX "-gz"
-# define fileno(file) file->__file
-#endif
-#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-# include <unix.h> /* for fileno */
-#endif
-
-#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
- extern int unlink OF((const char *));
-#endif
-
-#ifndef GZ_SUFFIX
-# define GZ_SUFFIX ".gz"
-#endif
-#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
-
-#define BUFLEN 16384
-#define MAX_NAME_LEN 1024
-
-#ifdef MAXSEG_64K
-# define local static
- /* Needed for systems with limitation on stack size. */
-#else
-# define local
-#endif
-
-char *prog;
-
-void error OF((const char *msg));
-void gz_compress OF((FILE *in, gzFile out));
-#ifdef USE_MMAP
-int gz_compress_mmap OF((FILE *in, gzFile out));
-#endif
-void gz_uncompress OF((gzFile in, FILE *out));
-void file_compress OF((char *file, char *mode));
-void file_uncompress OF((char *file));
-int main OF((int argc, char *argv[]));
-
-/* ===========================================================================
- * Display error message and exit
- */
-void error(msg)
- const char *msg;
-{
- fprintf(stderr, "%s: %s\n", prog, msg);
- exit(1);
-}
-
-/* ===========================================================================
- * Compress input to output then close both files.
- */
-
-void gz_compress(in, out)
- FILE *in;
- gzFile out;
-{
- local char buf[BUFLEN];
- int len;
- int err;
-
-#ifdef USE_MMAP
- /* Try first compressing with mmap. If mmap fails (minigzip used in a
- * pipe), use the normal fread loop.
- */
- if (gz_compress_mmap(in, out) == Z_OK) return;
-#endif
- for (;;) {
- len = fread(buf, 1, sizeof(buf), in);
- if (ferror(in)) {
- perror("fread");
- exit(1);
- }
- if (len == 0) break;
-
- if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
- }
- fclose(in);
- if (gzclose(out) != Z_OK) error("failed gzclose");
-}
-
-#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
-
-/* Try compressing the input file at once using mmap. Return Z_OK if
- * if success, Z_ERRNO otherwise.
- */
-int gz_compress_mmap(in, out)
- FILE *in;
- gzFile out;
-{
- int len;
- int err;
- int ifd = fileno(in);
- caddr_t buf; /* mmap'ed buffer for the entire input file */
- off_t buf_len; /* length of the input file */
- struct stat sb;
-
- /* Determine the size of the file, needed for mmap: */
- if (fstat(ifd, &sb) < 0) return Z_ERRNO;
- buf_len = sb.st_size;
- if (buf_len <= 0) return Z_ERRNO;
-
- /* Now do the actual mmap: */
- buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
- if (buf == (caddr_t)(-1)) return Z_ERRNO;
-
- /* Compress the whole file at once: */
- len = gzwrite(out, (char *)buf, (unsigned)buf_len);
-
- if (len != (int)buf_len) error(gzerror(out, &err));
-
- munmap(buf, buf_len);
- fclose(in);
- if (gzclose(out) != Z_OK) error("failed gzclose");
- return Z_OK;
-}
-#endif /* USE_MMAP */
-
-/* ===========================================================================
- * Uncompress input to output then close both files.
- */
-void gz_uncompress(in, out)
- gzFile in;
- FILE *out;
-{
- local char buf[BUFLEN];
- int len;
- int err;
-
- for (;;) {
- len = gzread(in, buf, sizeof(buf));
- if (len < 0) error (gzerror(in, &err));
- if (len == 0) break;
-
- if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
- error("failed fwrite");
- }
- }
- if (fclose(out)) error("failed fclose");
-
- if (gzclose(in) != Z_OK) error("failed gzclose");
-}
-
-
-/* ===========================================================================
- * Compress the given file: create a corresponding .gz file and remove the
- * original.
- */
-void file_compress(file, mode)
- char *file;
- char *mode;
-{
- local char outfile[MAX_NAME_LEN];
- FILE *in;
- gzFile out;
-
- strcpy(outfile, file);
- strcat(outfile, GZ_SUFFIX);
-
- in = fopen(file, "rb");
- if (in == NULL) {
- perror(file);
- exit(1);
- }
- out = gzopen(outfile, mode);
- if (out == NULL) {
- fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
- exit(1);
- }
- gz_compress(in, out);
-
- unlink(file);
-}
-
-
-/* ===========================================================================
- * Uncompress the given file and remove the original.
- */
-void file_uncompress(file)
- char *file;
-{
- local char buf[MAX_NAME_LEN];
- char *infile, *outfile;
- FILE *out;
- gzFile in;
- int len = strlen(file);
-
- strcpy(buf, file);
-
- if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
- infile = file;
- outfile = buf;
- outfile[len-3] = '\0';
- } else {
- outfile = file;
- infile = buf;
- strcat(infile, GZ_SUFFIX);
- }
- in = gzopen(infile, "rb");
- if (in == NULL) {
- fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
- exit(1);
- }
- out = fopen(outfile, "wb");
- if (out == NULL) {
- perror(file);
- exit(1);
- }
-
- gz_uncompress(in, out);
-
- unlink(infile);
-}
-
-
-/* ===========================================================================
- * Usage: minigzip [-d] [-f] [-h] [-1 to -9] [files...]
- * -d : decompress
- * -f : compress with Z_FILTERED
- * -h : compress with Z_HUFFMAN_ONLY
- * -1 to -9 : compression level
- */
-
-int main(argc, argv)
- int argc;
- char *argv[];
-{
- int uncompr = 0;
- gzFile file;
- char outmode[20];
-
- strcpy(outmode, "wb6 ");
-
- prog = argv[0];
- argc--, argv++;
-
- while (argc > 0) {
- if (strcmp(*argv, "-d") == 0)
- uncompr = 1;
- else if (strcmp(*argv, "-f") == 0)
- outmode[3] = 'f';
- else if (strcmp(*argv, "-h") == 0)
- outmode[3] = 'h';
- else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
- (*argv)[2] == 0)
- outmode[2] = (*argv)[1];
- else
- break;
- argc--, argv++;
- }
- if (argc == 0) {
- SET_BINARY_MODE(stdin);
- SET_BINARY_MODE(stdout);
- if (uncompr) {
- file = gzdopen(fileno(stdin), "rb");
- if (file == NULL) error("can't gzdopen stdin");
- gz_uncompress(file, stdout);
- } else {
- file = gzdopen(fileno(stdout), outmode);
- if (file == NULL) error("can't gzdopen stdout");
- gz_compress(stdin, file);
- }
- } else {
- do {
- if (uncompr) {
- file_uncompress(*argv);
- } else {
- file_compress(*argv, outmode);
- }
- } while (argv++, --argc);
- }
- exit(0);
- return 0; /* to avoid warning */
-}
+++ /dev/null
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-1998 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * ALGORITHM
- *
- * The "deflation" process uses several Huffman trees. The more
- * common source values are represented by shorter bit sequences.
- *
- * Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values). The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- * REFERENCES
- *
- * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- * Storer, James A.
- * Data Compression: Methods and Theory, pp. 49-50.
- * Computer Science Press, 1988. ISBN 0-7167-8156-5.
- *
- * Sedgewick, R.
- * Algorithms, p290.
- * Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* @(#) $Id$ */
-
-/* #define GEN_TREES_H */
-
-#include "deflate.h"
-
-#ifdef DEBUG
-# include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6 16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10 17
-/* repeat a zero length 3-10 times (3 bits of repeat count) */
-
-#define REPZ_11_138 18
-/* repeat a zero length 11-138 times (7 bits of repeat count) */
-
-local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
- = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local const int extra_dbits[D_CODES] /* extra bits for each distance code */
- = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
- = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local const uch bl_order[BL_CODES]
- = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- */
-
-#define DIST_CODE_LEN 512 /* see definition of array dist_code below */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
-/* non ANSI compilers may not accept trees.h */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-uch _dist_code[DIST_CODE_LEN];
-/* Distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-uch _length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-#else
-# include "trees.h"
-#endif /* GEN_TREES_H */
-
-struct static_tree_desc_s {
- const ct_data *static_tree; /* static tree or NULL */
- const intf *extra_bits; /* extra bits for each code or NULL */
- int extra_base; /* base index for extra_bits */
- int elems; /* max number of elements in the tree */
- int max_length; /* max bit length for the codes */
-};
-
-local static_tree_desc static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc static_d_desc =
-{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS};
-
-local static_tree_desc static_bl_desc =
-{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void tr_static_init OF((void));
-local void init_block OF((deflate_state *s));
-local void pqdownheap OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen OF((deflate_state *s, tree_desc *desc));
-local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree OF((deflate_state *s, tree_desc *desc));
-local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree OF((deflate_state *s, ct_data *tree, int max_code));
-local int build_bl_tree OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
- int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
- ct_data *dtree));
-local void set_data_type OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup OF((deflate_state *s));
-local void bi_flush OF((deflate_state *s));
-local void copy_block OF((deflate_state *s, charf *buf, unsigned len,
- int header));
-
-#ifdef GEN_TREES_H
-local void gen_trees_header OF((void));
-#endif
-
-#ifndef DEBUG
-# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
- /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG */
-# define send_code(s, c, tree) \
- { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
- send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
- put_byte(s, (uch)((w) & 0xff)); \
- put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG
-local void send_bits OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
- deflate_state *s;
- int value; /* value to send */
- int length; /* number of bits */
-{
- Tracevv((stderr," l %2d v %4x ", length, value));
- Assert(length > 0 && length <= 15, "invalid length");
- s->bits_sent += (ulg)length;
-
- /* If not enough room in bi_buf, use (valid) bits from bi_buf and
- * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
- * unused bits in value.
- */
- if (s->bi_valid > (int)Buf_size - length) {
- s->bi_buf |= (value << s->bi_valid);
- put_short(s, s->bi_buf);
- s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
- s->bi_valid += length - Buf_size;
- } else {
- s->bi_buf |= value << s->bi_valid;
- s->bi_valid += length;
- }
-}
-#else /* !DEBUG */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
- if (s->bi_valid > (int)Buf_size - len) {\
- int val = value;\
- s->bi_buf |= (val << s->bi_valid);\
- put_short(s, s->bi_buf);\
- s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
- s->bi_valid += len - Buf_size;\
- } else {\
- s->bi_buf |= (value) << s->bi_valid;\
- s->bi_valid += len;\
- }\
-}
-#endif /* DEBUG */
-
-
-#define MAX(a,b) (a >= b ? a : b)
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables.
- */
-local void tr_static_init()
-{
-#if defined(GEN_TREES_H) || !defined(STDC)
- static int static_init_done = 0;
- int n; /* iterates over tree elements */
- int bits; /* bit counter */
- int length; /* length value */
- int code; /* code value */
- int dist; /* distance index */
- ush bl_count[MAX_BITS+1];
- /* number of codes at each bit length for an optimal tree */
-
- if (static_init_done) return;
-
- /* For some embedded targets, global variables are not initialized: */
- static_l_desc.static_tree = static_ltree;
- static_l_desc.extra_bits = extra_lbits;
- static_d_desc.static_tree = static_dtree;
- static_d_desc.extra_bits = extra_dbits;
- static_bl_desc.extra_bits = extra_blbits;
-
- /* Initialize the mapping length (0..255) -> length code (0..28) */
- length = 0;
- for (code = 0; code < LENGTH_CODES-1; code++) {
- base_length[code] = length;
- for (n = 0; n < (1<<extra_lbits[code]); n++) {
- _length_code[length++] = (uch)code;
- }
- }
- Assert (length == 256, "tr_static_init: length != 256");
- /* Note that the length 255 (match length 258) can be represented
- * in two different ways: code 284 + 5 bits or code 285, so we
- * overwrite length_code[255] to use the best encoding:
- */
- _length_code[length-1] = (uch)code;
-
- /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
- dist = 0;
- for (code = 0 ; code < 16; code++) {
- base_dist[code] = dist;
- for (n = 0; n < (1<<extra_dbits[code]); n++) {
- _dist_code[dist++] = (uch)code;
- }
- }
- Assert (dist == 256, "tr_static_init: dist != 256");
- dist >>= 7; /* from now on, all distances are divided by 128 */
- for ( ; code < D_CODES; code++) {
- base_dist[code] = dist << 7;
- for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
- _dist_code[256 + dist++] = (uch)code;
- }
- }
- Assert (dist == 256, "tr_static_init: 256+dist != 512");
-
- /* Construct the codes of the static literal tree */
- for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
- n = 0;
- while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
- while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
- while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
- while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
- /* Codes 286 and 287 do not exist, but we must include them in the
- * tree construction to get a canonical Huffman tree (longest code
- * all ones)
- */
- gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
- /* The static distance tree is trivial: */
- for (n = 0; n < D_CODES; n++) {
- static_dtree[n].Len = 5;
- static_dtree[n].Code = bi_reverse((unsigned)n, 5);
- }
- static_init_done = 1;
-
-# ifdef GEN_TREES_H
- gen_trees_header();
-# endif
-#endif /* defined(GEN_TREES_H) || !defined(STDC) */
-}
-
-/* ===========================================================================
- * Genererate the file trees.h describing the static trees.
- */
-#ifdef GEN_TREES_H
-# ifndef DEBUG
-# include <stdio.h>
-# endif
-
-# define SEPARATOR(i, last, width) \
- ((i) == (last)? "\n};\n\n" : \
- ((i) % (width) == (width)-1 ? ",\n" : ", "))
-
-void gen_trees_header()
-{
- FILE *header = fopen("trees.h", "w");
- int i;
-
- Assert (header != NULL, "Can't open trees.h");
- fprintf(header,
- "/* header created automatically with -DGEN_TREES_H */\n\n");
-
- fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
- for (i = 0; i < L_CODES+2; i++) {
- fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
- static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
- }
-
- fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
- for (i = 0; i < D_CODES; i++) {
- fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
- static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
- }
-
- fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
- for (i = 0; i < DIST_CODE_LEN; i++) {
- fprintf(header, "%2u%s", _dist_code[i],
- SEPARATOR(i, DIST_CODE_LEN-1, 20));
- }
-
- fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
- for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
- fprintf(header, "%2u%s", _length_code[i],
- SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
- }
-
- fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
- for (i = 0; i < LENGTH_CODES; i++) {
- fprintf(header, "%1u%s", base_length[i],
- SEPARATOR(i, LENGTH_CODES-1, 20));
- }
-
- fprintf(header, "local const int base_dist[D_CODES] = {\n");
- for (i = 0; i < D_CODES; i++) {
- fprintf(header, "%5u%s", base_dist[i],
- SEPARATOR(i, D_CODES-1, 10));
- }
-
- fclose(header);
-}
-#endif /* GEN_TREES_H */
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-void _tr_init(s)
- deflate_state *s;
-{
- tr_static_init();
-
- s->l_desc.dyn_tree = s->dyn_ltree;
- s->l_desc.stat_desc = &static_l_desc;
-
- s->d_desc.dyn_tree = s->dyn_dtree;
- s->d_desc.stat_desc = &static_d_desc;
-
- s->bl_desc.dyn_tree = s->bl_tree;
- s->bl_desc.stat_desc = &static_bl_desc;
-
- s->bi_buf = 0;
- s->bi_valid = 0;
- s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG
- s->compressed_len = 0L;
- s->bits_sent = 0L;
-#endif
-
- /* Initialize the first block of the first file: */
- init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
- deflate_state *s;
-{
- int n; /* iterates over tree elements */
-
- /* Initialize the trees. */
- for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0;
- for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0;
- for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
- s->dyn_ltree[END_BLOCK].Freq = 1;
- s->opt_len = s->static_len = 0L;
- s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
- top = s->heap[SMALLEST]; \
- s->heap[SMALLEST] = s->heap[s->heap_len--]; \
- pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
- (tree[n].Freq < tree[m].Freq || \
- (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
- deflate_state *s;
- ct_data *tree; /* the tree to restore */
- int k; /* node to move down */
-{
- int v = s->heap[k];
- int j = k << 1; /* left son of k */
- while (j <= s->heap_len) {
- /* Set j to the smallest of the two sons: */
- if (j < s->heap_len &&
- smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
- j++;
- }
- /* Exit if v is smaller than both sons */
- if (smaller(tree, v, s->heap[j], s->depth)) break;
-
- /* Exchange v with the smallest son */
- s->heap[k] = s->heap[j]; k = j;
-
- /* And continue down the tree, setting j to the left son of k */
- j <<= 1;
- }
- s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- * above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- * array bl_count contains the frequencies for each bit length.
- * The length opt_len is updated; static_len is also updated if stree is
- * not null.
- */
-local void gen_bitlen(s, desc)
- deflate_state *s;
- tree_desc *desc; /* the tree descriptor */
-{
- ct_data *tree = desc->dyn_tree;
- int max_code = desc->max_code;
- const ct_data *stree = desc->stat_desc->static_tree;
- const intf *extra = desc->stat_desc->extra_bits;
- int base = desc->stat_desc->extra_base;
- int max_length = desc->stat_desc->max_length;
- int h; /* heap index */
- int n, m; /* iterate over the tree elements */
- int bits; /* bit length */
- int xbits; /* extra bits */
- ush f; /* frequency */
- int overflow = 0; /* number of elements with bit length too large */
-
- for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
- /* In a first pass, compute the optimal bit lengths (which may
- * overflow in the case of the bit length tree).
- */
- tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
- for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
- n = s->heap[h];
- bits = tree[tree[n].Dad].Len + 1;
- if (bits > max_length) bits = max_length, overflow++;
- tree[n].Len = (ush)bits;
- /* We overwrite tree[n].Dad which is no longer needed */
-
- if (n > max_code) continue; /* not a leaf node */
-
- s->bl_count[bits]++;
- xbits = 0;
- if (n >= base) xbits = extra[n-base];
- f = tree[n].Freq;
- s->opt_len += (ulg)f * (bits + xbits);
- if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
- }
- if (overflow == 0) return;
-
- Trace((stderr,"\nbit length overflow\n"));
- /* This happens for example on obj2 and pic of the Calgary corpus */
-
- /* Find the first bit length which could increase: */
- do {
- bits = max_length-1;
- while (s->bl_count[bits] == 0) bits--;
- s->bl_count[bits]--; /* move one leaf down the tree */
- s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
- s->bl_count[max_length]--;
- /* The brother of the overflow item also moves one step up,
- * but this does not affect bl_count[max_length]
- */
- overflow -= 2;
- } while (overflow > 0);
-
- /* Now recompute all bit lengths, scanning in increasing frequency.
- * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
- * lengths instead of fixing only the wrong ones. This idea is taken
- * from 'ar' written by Haruhiko Okumura.)
- */
- for (bits = max_length; bits != 0; bits--) {
- n = s->bl_count[bits];
- while (n != 0) {
- m = s->heap[--h];
- if (m > max_code) continue;
- if (tree[m].Len != (unsigned) bits) {
- Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
- s->opt_len += ((long)bits - (long)tree[m].Len)
- *(long)tree[m].Freq;
- tree[m].Len = (ush)bits;
- }
- n--;
- }
- }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- * zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
- ct_data *tree; /* the tree to decorate */
- int max_code; /* largest code with non zero frequency */
- ushf *bl_count; /* number of codes at each bit length */
-{
- ush next_code[MAX_BITS+1]; /* next code value for each bit length */
- ush code = 0; /* running code value */
- int bits; /* bit index */
- int n; /* code index */
-
- /* The distribution counts are first used to generate the code values
- * without bit reversal.
- */
- for (bits = 1; bits <= MAX_BITS; bits++) {
- next_code[bits] = code = (code + bl_count[bits-1]) << 1;
- }
- /* Check that the bit counts in bl_count are consistent. The last code
- * must be all ones.
- */
- Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
- "inconsistent bit counts");
- Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
- for (n = 0; n <= max_code; n++) {
- int len = tree[n].Len;
- if (len == 0) continue;
- /* Now reverse the bits */
- tree[n].Code = bi_reverse(next_code[len]++, len);
-
- Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
- n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
- }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- * and corresponding code. The length opt_len is updated; static_len is
- * also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
- deflate_state *s;
- tree_desc *desc; /* the tree descriptor */
-{
- ct_data *tree = desc->dyn_tree;
- const ct_data *stree = desc->stat_desc->static_tree;
- int elems = desc->stat_desc->elems;
- int n, m; /* iterate over heap elements */
- int max_code = -1; /* largest code with non zero frequency */
- int node; /* new node being created */
-
- /* Construct the initial heap, with least frequent element in
- * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
- * heap[0] is not used.
- */
- s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
- for (n = 0; n < elems; n++) {
- if (tree[n].Freq != 0) {
- s->heap[++(s->heap_len)] = max_code = n;
- s->depth[n] = 0;
- } else {
- tree[n].Len = 0;
- }
- }
-
- /* The pkzip format requires that at least one distance code exists,
- * and that at least one bit should be sent even if there is only one
- * possible code. So to avoid special checks later on we force at least
- * two codes of non zero frequency.
- */
- while (s->heap_len < 2) {
- node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
- tree[node].Freq = 1;
- s->depth[node] = 0;
- s->opt_len--; if (stree) s->static_len -= stree[node].Len;
- /* node is 0 or 1 so it does not have extra bits */
- }
- desc->max_code = max_code;
-
- /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
- * establish sub-heaps of increasing lengths:
- */
- for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
- /* Construct the Huffman tree by repeatedly combining the least two
- * frequent nodes.
- */
- node = elems; /* next internal node of the tree */
- do {
- pqremove(s, tree, n); /* n = node of least frequency */
- m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
- s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
- s->heap[--(s->heap_max)] = m;
-
- /* Create a new node father of n and m */
- tree[node].Freq = tree[n].Freq + tree[m].Freq;
- s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
- tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
- if (tree == s->bl_tree) {
- fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
- node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
- }
-#endif
- /* and insert the new node in the heap */
- s->heap[SMALLEST] = node++;
- pqdownheap(s, tree, SMALLEST);
-
- } while (s->heap_len >= 2);
-
- s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
- /* At this point, the fields freq and dad are set. We can now
- * generate the bit lengths.
- */
- gen_bitlen(s, (tree_desc *)desc);
-
- /* The field len is now set, we can generate the bit codes */
- gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
- deflate_state *s;
- ct_data *tree; /* the tree to be scanned */
- int max_code; /* and its largest code of non zero frequency */
-{
- int n; /* iterates over all tree elements */
- int prevlen = -1; /* last emitted length */
- int curlen; /* length of current code */
- int nextlen = tree[0].Len; /* length of next code */
- int count = 0; /* repeat count of the current code */
- int max_count = 7; /* max repeat count */
- int min_count = 4; /* min repeat count */
-
- if (nextlen == 0) max_count = 138, min_count = 3;
- tree[max_code+1].Len = (ush)0xffff; /* guard */
-
- for (n = 0; n <= max_code; n++) {
- curlen = nextlen; nextlen = tree[n+1].Len;
- if (++count < max_count && curlen == nextlen) {
- continue;
- } else if (count < min_count) {
- s->bl_tree[curlen].Freq += count;
- } else if (curlen != 0) {
- if (curlen != prevlen) s->bl_tree[curlen].Freq++;
- s->bl_tree[REP_3_6].Freq++;
- } else if (count <= 10) {
- s->bl_tree[REPZ_3_10].Freq++;
- } else {
- s->bl_tree[REPZ_11_138].Freq++;
- }
- count = 0; prevlen = curlen;
- if (nextlen == 0) {
- max_count = 138, min_count = 3;
- } else if (curlen == nextlen) {
- max_count = 6, min_count = 3;
- } else {
- max_count = 7, min_count = 4;
- }
- }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
- deflate_state *s;
- ct_data *tree; /* the tree to be scanned */
- int max_code; /* and its largest code of non zero frequency */
-{
- int n; /* iterates over all tree elements */
- int prevlen = -1; /* last emitted length */
- int curlen; /* length of current code */
- int nextlen = tree[0].Len; /* length of next code */
- int count = 0; /* repeat count of the current code */
- int max_count = 7; /* max repeat count */
- int min_count = 4; /* min repeat count */
-
- /* tree[max_code+1].Len = -1; */ /* guard already set */
- if (nextlen == 0) max_count = 138, min_count = 3;
-
- for (n = 0; n <= max_code; n++) {
- curlen = nextlen; nextlen = tree[n+1].Len;
- if (++count < max_count && curlen == nextlen) {
- continue;
- } else if (count < min_count) {
- do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
- } else if (curlen != 0) {
- if (curlen != prevlen) {
- send_code(s, curlen, s->bl_tree); count--;
- }
- Assert(count >= 3 && count <= 6, " 3_6?");
- send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
- } else if (count <= 10) {
- send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
- } else {
- send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
- }
- count = 0; prevlen = curlen;
- if (nextlen == 0) {
- max_count = 138, min_count = 3;
- } else if (curlen == nextlen) {
- max_count = 6, min_count = 3;
- } else {
- max_count = 7, min_count = 4;
- }
- }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
- deflate_state *s;
-{
- int max_blindex; /* index of last bit length code of non zero freq */
-
- /* Determine the bit length frequencies for literal and distance trees */
- scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
- scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
- /* Build the bit length tree: */
- build_tree(s, (tree_desc *)(&(s->bl_desc)));
- /* opt_len now includes the length of the tree representations, except
- * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
- */
-
- /* Determine the number of bit length codes to send. The pkzip format
- * requires that at least 4 bit length codes be sent. (appnote.txt says
- * 3 but the actual value used is 4.)
- */
- for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
- if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
- }
- /* Update opt_len to include the bit length tree and counts */
- s->opt_len += 3*(max_blindex+1) + 5+5+4;
- Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
- s->opt_len, s->static_len));
-
- return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
- deflate_state *s;
- int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
- int rank; /* index in bl_order */
-
- Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
- Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
- "too many codes");
- Tracev((stderr, "\nbl counts: "));
- send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
- send_bits(s, dcodes-1, 5);
- send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */
- for (rank = 0; rank < blcodes; rank++) {
- Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
- send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
- }
- Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
- send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
- Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
- send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
- Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-void _tr_stored_block(s, buf, stored_len, eof)
- deflate_state *s;
- charf *buf; /* input block */
- ulg stored_len; /* length of input block */
- int eof; /* true if this is the last block for a file */
-{
- send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */
-#ifdef DEBUG
- s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
- s->compressed_len += (stored_len + 4) << 3;
-#endif
- copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the
- * last two codes for the previous block (real code plus EOB) were coded
- * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
- * the last real code. In this case we send two empty static blocks instead
- * of one. (There are no problems if the previous block is stored or fixed.)
- * To simplify the code, we assume the worst case of last real code encoded
- * on one bit only.
- */
-void _tr_align(s)
- deflate_state *s;
-{
- send_bits(s, STATIC_TREES<<1, 3);
- send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG
- s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
-#endif
- bi_flush(s);
- /* Of the 10 bits for the empty block, we have already sent
- * (10 - bi_valid) bits. The lookahead for the last real code (before
- * the EOB of the previous block) was thus at least one plus the length
- * of the EOB plus what we have just sent of the empty static block.
- */
- if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
- send_bits(s, STATIC_TREES<<1, 3);
- send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG
- s->compressed_len += 10L;
-#endif
- bi_flush(s);
- }
- s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file.
- */
-void _tr_flush_block(s, buf, stored_len, eof)
- deflate_state *s;
- charf *buf; /* input block, or NULL if too old */
- ulg stored_len; /* length of input block */
- int eof; /* true if this is the last block for a file */
-{
- ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
- int max_blindex = 0; /* index of last bit length code of non zero freq */
-
- /* Build the Huffman trees unless a stored block is forced */
- if (s->level > 0) {
-
- /* Check if the file is ascii or binary */
- if (s->data_type == Z_UNKNOWN) set_data_type(s);
-
- /* Construct the literal and distance trees */
- build_tree(s, (tree_desc *)(&(s->l_desc)));
- Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
- s->static_len));
-
- build_tree(s, (tree_desc *)(&(s->d_desc)));
- Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
- s->static_len));
- /* At this point, opt_len and static_len are the total bit lengths of
- * the compressed block data, excluding the tree representations.
- */
-
- /* Build the bit length tree for the above two trees, and get the index
- * in bl_order of the last bit length code to send.
- */
- max_blindex = build_bl_tree(s);
-
- /* Determine the best encoding. Compute first the block length in bytes*/
- opt_lenb = (s->opt_len+3+7)>>3;
- static_lenb = (s->static_len+3+7)>>3;
-
- Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
- opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
- s->last_lit));
-
- if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
- } else {
- Assert(buf != (char*)0, "lost buf");
- opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
- }
-
-#ifdef FORCE_STORED
- if (buf != (char*)0) { /* force stored block */
-#else
- if (stored_len+4 <= opt_lenb && buf != (char*)0) {
- /* 4: two words for the lengths */
-#endif
- /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
- * Otherwise we can't have processed more than WSIZE input bytes since
- * the last block flush, because compression would have been
- * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
- * transform a block into a stored block.
- */
- _tr_stored_block(s, buf, stored_len, eof);
-
-#ifdef FORCE_STATIC
- } else if (static_lenb >= 0) { /* force static trees */
-#else
- } else if (static_lenb == opt_lenb) {
-#endif
- send_bits(s, (STATIC_TREES<<1)+eof, 3);
- compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
-#ifdef DEBUG
- s->compressed_len += 3 + s->static_len;
-#endif
- } else {
- send_bits(s, (DYN_TREES<<1)+eof, 3);
- send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
- max_blindex+1);
- compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
-#ifdef DEBUG
- s->compressed_len += 3 + s->opt_len;
-#endif
- }
- Assert (s->compressed_len == s->bits_sent, "bad compressed size");
- /* The above check is made mod 2^32, for files larger than 512 MB
- * and uLong implemented on 32 bits.
- */
- init_block(s);
-
- if (eof) {
- bi_windup(s);
-#ifdef DEBUG
- s->compressed_len += 7; /* align on byte boundary */
-#endif
- }
- Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
- s->compressed_len-7*eof));
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-int _tr_tally (s, dist, lc)
- deflate_state *s;
- unsigned dist; /* distance of matched string */
- unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
- s->d_buf[s->last_lit] = (ush)dist;
- s->l_buf[s->last_lit++] = (uch)lc;
- if (dist == 0) {
- /* lc is the unmatched char */
- s->dyn_ltree[lc].Freq++;
- } else {
- s->matches++;
- /* Here, lc is the match length - MIN_MATCH */
- dist--; /* dist = match distance - 1 */
- Assert((ush)dist < (ush)MAX_DIST(s) &&
- (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
- (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match");
-
- s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
- s->dyn_dtree[d_code(dist)].Freq++;
- }
-
-#ifdef TRUNCATE_BLOCK
- /* Try to guess if it is profitable to stop the current block here */
- if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
- /* Compute an upper bound for the compressed length */
- ulg out_length = (ulg)s->last_lit*8L;
- ulg in_length = (ulg)((long)s->strstart - s->block_start);
- int dcode;
- for (dcode = 0; dcode < D_CODES; dcode++) {
- out_length += (ulg)s->dyn_dtree[dcode].Freq *
- (5L+extra_dbits[dcode]);
- }
- out_length >>= 3;
- Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
- s->last_lit, in_length, out_length,
- 100L - out_length*100L/in_length));
- if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
- }
-#endif
- return (s->last_lit == s->lit_bufsize-1);
- /* We avoid equality with lit_bufsize because of wraparound at 64K
- * on 16 bit machines and because stored blocks are restricted to
- * 64K-1 bytes.
- */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
- deflate_state *s;
- ct_data *ltree; /* literal tree */
- ct_data *dtree; /* distance tree */
-{
- unsigned dist; /* distance of matched string */
- int lc; /* match length or unmatched char (if dist == 0) */
- unsigned lx = 0; /* running index in l_buf */
- unsigned code; /* the code to send */
- int extra; /* number of extra bits to send */
-
- if (s->last_lit != 0) do {
- dist = s->d_buf[lx];
- lc = s->l_buf[lx++];
- if (dist == 0) {
- send_code(s, lc, ltree); /* send a literal byte */
- Tracecv(isgraph(lc), (stderr," '%c' ", lc));
- } else {
- /* Here, lc is the match length - MIN_MATCH */
- code = _length_code[lc];
- send_code(s, code+LITERALS+1, ltree); /* send the length code */
- extra = extra_lbits[code];
- if (extra != 0) {
- lc -= base_length[code];
- send_bits(s, lc, extra); /* send the extra length bits */
- }
- dist--; /* dist is now the match distance - 1 */
- code = d_code(dist);
- Assert (code < D_CODES, "bad d_code");
-
- send_code(s, code, dtree); /* send the distance code */
- extra = extra_dbits[code];
- if (extra != 0) {
- dist -= base_dist[code];
- send_bits(s, dist, extra); /* send the extra distance bits */
- }
- } /* literal or match pair ? */
-
- /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
- Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
-
- } while (lx < s->last_lit);
-
- send_code(s, END_BLOCK, ltree);
- s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
- */
-local void set_data_type(s)
- deflate_state *s;
-{
- int n = 0;
- unsigned ascii_freq = 0;
- unsigned bin_freq = 0;
- while (n < 7) bin_freq += s->dyn_ltree[n++].Freq;
- while (n < 128) ascii_freq += s->dyn_ltree[n++].Freq;
- while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
- s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII);
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
- unsigned code; /* the value to invert */
- int len; /* its bit length */
-{
- register unsigned res = 0;
- do {
- res |= code & 1;
- code >>= 1, res <<= 1;
- } while (--len > 0);
- return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
- deflate_state *s;
-{
- if (s->bi_valid == 16) {
- put_short(s, s->bi_buf);
- s->bi_buf = 0;
- s->bi_valid = 0;
- } else if (s->bi_valid >= 8) {
- put_byte(s, (Byte)s->bi_buf);
- s->bi_buf >>= 8;
- s->bi_valid -= 8;
- }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
- deflate_state *s;
-{
- if (s->bi_valid > 8) {
- put_short(s, s->bi_buf);
- } else if (s->bi_valid > 0) {
- put_byte(s, (Byte)s->bi_buf);
- }
- s->bi_buf = 0;
- s->bi_valid = 0;
-#ifdef DEBUG
- s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
- deflate_state *s;
- charf *buf; /* the input data */
- unsigned len; /* its length */
- int header; /* true if block header must be written */
-{
- bi_windup(s); /* align on byte boundary */
- s->last_eob_len = 8; /* enough lookahead for inflate */
-
- if (header) {
- put_short(s, (ush)len);
- put_short(s, (ush)~len);
-#ifdef DEBUG
- s->bits_sent += 2*16;
-#endif
- }
-#ifdef DEBUG
- s->bits_sent += (ulg)len<<3;
-#endif
- while (len--) {
- put_byte(s, *buf++);
- }
-}
+++ /dev/null
-/* header created automatically with -DGEN_TREES_H */
-
-local const ct_data static_ltree[L_CODES+2] = {
-{{ 12},{ 8}}, {{140},{ 8}}, {{ 76},{ 8}}, {{204},{ 8}}, {{ 44},{ 8}},
-{{172},{ 8}}, {{108},{ 8}}, {{236},{ 8}}, {{ 28},{ 8}}, {{156},{ 8}},
-{{ 92},{ 8}}, {{220},{ 8}}, {{ 60},{ 8}}, {{188},{ 8}}, {{124},{ 8}},
-{{252},{ 8}}, {{ 2},{ 8}}, {{130},{ 8}}, {{ 66},{ 8}}, {{194},{ 8}},
-{{ 34},{ 8}}, {{162},{ 8}}, {{ 98},{ 8}}, {{226},{ 8}}, {{ 18},{ 8}},
-{{146},{ 8}}, {{ 82},{ 8}}, {{210},{ 8}}, {{ 50},{ 8}}, {{178},{ 8}},
-{{114},{ 8}}, {{242},{ 8}}, {{ 10},{ 8}}, {{138},{ 8}}, {{ 74},{ 8}},
-{{202},{ 8}}, {{ 42},{ 8}}, {{170},{ 8}}, {{106},{ 8}}, {{234},{ 8}},
-{{ 26},{ 8}}, {{154},{ 8}}, {{ 90},{ 8}}, {{218},{ 8}}, {{ 58},{ 8}},
-{{186},{ 8}}, {{122},{ 8}}, {{250},{ 8}}, {{ 6},{ 8}}, {{134},{ 8}},
-{{ 70},{ 8}}, {{198},{ 8}}, {{ 38},{ 8}}, {{166},{ 8}}, {{102},{ 8}},
-{{230},{ 8}}, {{ 22},{ 8}}, {{150},{ 8}}, {{ 86},{ 8}}, {{214},{ 8}},
-{{ 54},{ 8}}, {{182},{ 8}}, {{118},{ 8}}, {{246},{ 8}}, {{ 14},{ 8}},
-{{142},{ 8}}, {{ 78},{ 8}}, {{206},{ 8}}, {{ 46},{ 8}}, {{174},{ 8}},
-{{110},{ 8}}, {{238},{ 8}}, {{ 30},{ 8}}, {{158},{ 8}}, {{ 94},{ 8}},
-{{222},{ 8}}, {{ 62},{ 8}}, {{190},{ 8}}, {{126},{ 8}}, {{254},{ 8}},
-{{ 1},{ 8}}, {{129},{ 8}}, {{ 65},{ 8}}, {{193},{ 8}}, {{ 33},{ 8}},
-{{161},{ 8}}, {{ 97},{ 8}}, {{225},{ 8}}, {{ 17},{ 8}}, {{145},{ 8}},
-{{ 81},{ 8}}, {{209},{ 8}}, {{ 49},{ 8}}, {{177},{ 8}}, {{113},{ 8}},
-{{241},{ 8}}, {{ 9},{ 8}}, {{137},{ 8}}, {{ 73},{ 8}}, {{201},{ 8}},
-{{ 41},{ 8}}, {{169},{ 8}}, {{105},{ 8}}, {{233},{ 8}}, {{ 25},{ 8}},
-{{153},{ 8}}, {{ 89},{ 8}}, {{217},{ 8}}, {{ 57},{ 8}}, {{185},{ 8}},
-{{121},{ 8}}, {{249},{ 8}}, {{ 5},{ 8}}, {{133},{ 8}}, {{ 69},{ 8}},
-{{197},{ 8}}, {{ 37},{ 8}}, {{165},{ 8}}, {{101},{ 8}}, {{229},{ 8}},
-{{ 21},{ 8}}, {{149},{ 8}}, {{ 85},{ 8}}, {{213},{ 8}}, {{ 53},{ 8}},
-{{181},{ 8}}, {{117},{ 8}}, {{245},{ 8}}, {{ 13},{ 8}}, {{141},{ 8}},
-{{ 77},{ 8}}, {{205},{ 8}}, {{ 45},{ 8}}, {{173},{ 8}}, {{109},{ 8}},
-{{237},{ 8}}, {{ 29},{ 8}}, {{157},{ 8}}, {{ 93},{ 8}}, {{221},{ 8}},
-{{ 61},{ 8}}, {{189},{ 8}}, {{125},{ 8}}, {{253},{ 8}}, {{ 19},{ 9}},
-{{275},{ 9}}, {{147},{ 9}}, {{403},{ 9}}, {{ 83},{ 9}}, {{339},{ 9}},
-{{211},{ 9}}, {{467},{ 9}}, {{ 51},{ 9}}, {{307},{ 9}}, {{179},{ 9}},
-{{435},{ 9}}, {{115},{ 9}}, {{371},{ 9}}, {{243},{ 9}}, {{499},{ 9}},
-{{ 11},{ 9}}, {{267},{ 9}}, {{139},{ 9}}, {{395},{ 9}}, {{ 75},{ 9}},
-{{331},{ 9}}, {{203},{ 9}}, {{459},{ 9}}, {{ 43},{ 9}}, {{299},{ 9}},
-{{171},{ 9}}, {{427},{ 9}}, {{107},{ 9}}, {{363},{ 9}}, {{235},{ 9}},
-{{491},{ 9}}, {{ 27},{ 9}}, {{283},{ 9}}, {{155},{ 9}}, {{411},{ 9}},
-{{ 91},{ 9}}, {{347},{ 9}}, {{219},{ 9}}, {{475},{ 9}}, {{ 59},{ 9}},
-{{315},{ 9}}, {{187},{ 9}}, {{443},{ 9}}, {{123},{ 9}}, {{379},{ 9}},
-{{251},{ 9}}, {{507},{ 9}}, {{ 7},{ 9}}, {{263},{ 9}}, {{135},{ 9}},
-{{391},{ 9}}, {{ 71},{ 9}}, {{327},{ 9}}, {{199},{ 9}}, {{455},{ 9}},
-{{ 39},{ 9}}, {{295},{ 9}}, {{167},{ 9}}, {{423},{ 9}}, {{103},{ 9}},
-{{359},{ 9}}, {{231},{ 9}}, {{487},{ 9}}, {{ 23},{ 9}}, {{279},{ 9}},
-{{151},{ 9}}, {{407},{ 9}}, {{ 87},{ 9}}, {{343},{ 9}}, {{215},{ 9}},
-{{471},{ 9}}, {{ 55},{ 9}}, {{311},{ 9}}, {{183},{ 9}}, {{439},{ 9}},
-{{119},{ 9}}, {{375},{ 9}}, {{247},{ 9}}, {{503},{ 9}}, {{ 15},{ 9}},
-{{271},{ 9}}, {{143},{ 9}}, {{399},{ 9}}, {{ 79},{ 9}}, {{335},{ 9}},
-{{207},{ 9}}, {{463},{ 9}}, {{ 47},{ 9}}, {{303},{ 9}}, {{175},{ 9}},
-{{431},{ 9}}, {{111},{ 9}}, {{367},{ 9}}, {{239},{ 9}}, {{495},{ 9}},
-{{ 31},{ 9}}, {{287},{ 9}}, {{159},{ 9}}, {{415},{ 9}}, {{ 95},{ 9}},
-{{351},{ 9}}, {{223},{ 9}}, {{479},{ 9}}, {{ 63},{ 9}}, {{319},{ 9}},
-{{191},{ 9}}, {{447},{ 9}}, {{127},{ 9}}, {{383},{ 9}}, {{255},{ 9}},
-{{511},{ 9}}, {{ 0},{ 7}}, {{ 64},{ 7}}, {{ 32},{ 7}}, {{ 96},{ 7}},
-{{ 16},{ 7}}, {{ 80},{ 7}}, {{ 48},{ 7}}, {{112},{ 7}}, {{ 8},{ 7}},
-{{ 72},{ 7}}, {{ 40},{ 7}}, {{104},{ 7}}, {{ 24},{ 7}}, {{ 88},{ 7}},
-{{ 56},{ 7}}, {{120},{ 7}}, {{ 4},{ 7}}, {{ 68},{ 7}}, {{ 36},{ 7}},
-{{100},{ 7}}, {{ 20},{ 7}}, {{ 84},{ 7}}, {{ 52},{ 7}}, {{116},{ 7}},
-{{ 3},{ 8}}, {{131},{ 8}}, {{ 67},{ 8}}, {{195},{ 8}}, {{ 35},{ 8}},
-{{163},{ 8}}, {{ 99},{ 8}}, {{227},{ 8}}
-};
-
-local const ct_data static_dtree[D_CODES] = {
-{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
-{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
-{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
-{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
-{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
-{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
-};
-
-const uch _dist_code[DIST_CODE_LEN] = {
- 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8,
- 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10,
-10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
-11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
-12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
-13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
-13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
-15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17,
-18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
-23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
-29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
-};
-
-const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
- 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12,
-13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
-17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
-19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
-21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
-22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
-23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
-25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
-26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
-27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
-};
-
-local const int base_length[LENGTH_CODES] = {
-0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
-64, 80, 96, 112, 128, 160, 192, 224, 0
-};
-
-local const int base_dist[D_CODES] = {
- 0, 1, 2, 3, 4, 6, 8, 12, 16, 24,
- 32, 48, 64, 96, 128, 192, 256, 384, 512, 768,
- 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576
-};
-
+++ /dev/null
-/* uncompr.c -- decompress a memory buffer
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zlib.h"
-
-/* ===========================================================================
- Decompresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be large enough to hold the
- entire uncompressed data. (The size of the uncompressed data must have
- been saved previously by the compressor and transmitted to the decompressor
- by some mechanism outside the scope of this compression library.)
- Upon exit, destLen is the actual size of the compressed buffer.
- This function can be used to decompress a whole file at once if the
- input file is mmap'ed.
-
- uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer, or Z_DATA_ERROR if the input data was corrupted.
-*/
-int ZEXPORT uncompress (dest, destLen, source, sourceLen)
- Bytef *dest;
- uLongf *destLen;
- const Bytef *source;
- uLong sourceLen;
-{
- z_stream stream;
- int err;
-
- stream.next_in = (Bytef*)source;
- stream.avail_in = (uInt)sourceLen;
- /* Check for source > 64K on 16-bit machine: */
- if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-
- stream.next_out = dest;
- stream.avail_out = (uInt)*destLen;
- if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
-
- stream.zalloc = (alloc_func)0;
- stream.zfree = (free_func)0;
-
- err = inflateInit(&stream);
- if (err != Z_OK) return err;
-
- err = inflate(&stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- inflateEnd(&stream);
- return err == Z_OK ? Z_BUF_ERROR : err;
- }
- *destLen = stream.total_out;
-
- err = inflateEnd(&stream);
- return err;
-}
+++ /dev/null
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#ifndef _ZCONF_H
-#define _ZCONF_H
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- */
-#ifdef Z_PREFIX
-# define deflateInit_ z_deflateInit_
-# define deflate z_deflate
-# define deflateEnd z_deflateEnd
-# define inflateInit_ z_inflateInit_
-# define inflate z_inflate
-# define inflateEnd z_inflateEnd
-# define deflateInit2_ z_deflateInit2_
-# define deflateSetDictionary z_deflateSetDictionary
-# define deflateCopy z_deflateCopy
-# define deflateReset z_deflateReset
-# define deflateParams z_deflateParams
-# define inflateInit2_ z_inflateInit2_
-# define inflateSetDictionary z_inflateSetDictionary
-# define inflateSync z_inflateSync
-# define inflateSyncPoint z_inflateSyncPoint
-# define inflateReset z_inflateReset
-# define compress z_compress
-# define compress2 z_compress2
-# define uncompress z_uncompress
-# define adler32 z_adler32
-# define crc32 z_crc32
-# define get_crc_table z_get_crc_table
-
-# define Byte z_Byte
-# define uInt z_uInt
-# define uLong z_uLong
-# define Bytef z_Bytef
-# define charf z_charf
-# define intf z_intf
-# define uIntf z_uIntf
-# define uLongf z_uLongf
-# define voidpf z_voidpf
-# define voidp z_voidp
-#endif
-
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-# define WIN32
-#endif
-#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
-# ifndef __32BIT__
-# define __32BIT__
-# endif
-#endif
-#if defined(__MSDOS__) && !defined(MSDOS)
-# define MSDOS
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#if defined(MSDOS) && !defined(__32BIT__)
-# define MAXSEG_64K
-#endif
-#ifdef MSDOS
-# define UNALIGNED_OK
-#endif
-
-/* RRDtool will not compile without them anyway */
-#define STDC
-
-#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32)) && !defined(STDC)
-# define STDC
-#endif
-#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__)
-# ifndef STDC
-# define STDC
-# endif
-#endif
-
-#ifndef STDC
-# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-# define const
-# endif
-#endif
-
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
-# define NO_DUMMY_DECL
-#endif
-
-/* Old Borland C incorrectly complains about missing returns: */
-#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
-# define NEED_DUMMY_RETURN
-#endif
-
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-# ifdef MAXSEG_64K
-# define MAX_MEM_LEVEL 8
-# else
-# define MAX_MEM_LEVEL 9
-# endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2.
- * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
- * created by gzip. (Files created by minigzip can still be extracted by
- * gzip.)
- */
-#ifndef MAX_WBITS
-# define MAX_WBITS 15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
- (1 << (windowBits+2)) + (1 << (memLevel+9))
- that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
- make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
- The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
- /* Type declarations */
-
-#ifndef OF /* function prototypes */
-# ifdef STDC
-# define OF(args) args
-# else
-# define OF(args) ()
-# endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
- /* MSC small or medium model */
-# define SMALL_MEDIUM
-# ifdef _MSC_VER
-# define FAR _far
-# else
-# define FAR far
-# endif
-#endif
-#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
-# ifndef __32BIT__
-# define SMALL_MEDIUM
-# define FAR _far
-# endif
-#endif
-
-/* Compile with -DZLIB_DLL for Windows DLL support */
-#if defined(ZLIB_DLL)
-# if defined(_WINDOWS) || defined(WINDOWS)
-# ifdef FAR
-# undef FAR
-# endif
-# include <windows.h>
-# define ZEXPORT WINAPI
-# ifdef WIN32
-# define ZEXPORTVA WINAPIV
-# else
-# define ZEXPORTVA FAR _cdecl _export
-# endif
-# endif
-# if defined (__BORLANDC__)
-# if (__BORLANDC__ >= 0x0500) && defined (WIN32)
-# include <windows.h>
-# define ZEXPORT __declspec(dllexport) WINAPI
-# define ZEXPORTRVA __declspec(dllexport) WINAPIV
-# else
-# if defined (_Windows) && defined (__DLL__)
-# define ZEXPORT _export
-# define ZEXPORTVA _export
-# endif
-# endif
-# endif
-#endif
-
-#if defined (__BEOS__)
-# if defined (ZLIB_DLL)
-# define ZEXTERN extern __declspec(dllexport)
-# else
-# define ZEXTERN extern __declspec(dllimport)
-# endif
-#endif
-
-#ifndef ZEXPORT
-# define ZEXPORT
-#endif
-#ifndef ZEXPORTVA
-# define ZEXPORTVA
-#endif
-#ifndef ZEXTERN
-# define ZEXTERN extern
-#endif
-
-#ifndef FAR
-# define FAR
-#endif
-
-#if !defined(MACOS) && !defined(TARGET_OS_MAC)
-typedef unsigned char Byte; /* 8 bits */
-#endif
-typedef unsigned int uInt; /* 16 bits or more */
-typedef unsigned long uLong; /* 32 bits or more */
-
-#ifdef SMALL_MEDIUM
- /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
-# define Bytef Byte FAR
-#else
- typedef Byte FAR Bytef;
-#endif
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
- typedef void FAR *voidpf;
- typedef void *voidp;
-#else
- typedef Byte FAR *voidpf;
- typedef Byte *voidp;
-#endif
-
-#ifdef HAVE_UNISTD_H
-# include <sys/types.h> /* for off_t */
-# include <unistd.h> /* for SEEK_* and off_t */
-# define z_off_t off_t
-#endif
-#ifndef SEEK_SET
-# define SEEK_SET 0 /* Seek from beginning of file. */
-# define SEEK_CUR 1 /* Seek from current position. */
-# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
-#endif
-#ifndef z_off_t
-# define z_off_t long
-#endif
-
-/* MVS linker does not support external names larger than 8 bytes */
-#if defined(__MVS__)
-# pragma map(deflateInit_,"DEIN")
-# pragma map(deflateInit2_,"DEIN2")
-# pragma map(deflateEnd,"DEEND")
-# pragma map(inflateInit_,"ININ")
-# pragma map(inflateInit2_,"ININ2")
-# pragma map(inflateEnd,"INEND")
-# pragma map(inflateSync,"INSY")
-# pragma map(inflateSetDictionary,"INSEDI")
-# pragma map(inflate_blocks,"INBL")
-# pragma map(inflate_blocks_new,"INBLNE")
-# pragma map(inflate_blocks_free,"INBLFR")
-# pragma map(inflate_blocks_reset,"INBLRE")
-# pragma map(inflate_codes_free,"INCOFR")
-# pragma map(inflate_codes,"INCO")
-# pragma map(inflate_fast,"INFA")
-# pragma map(inflate_flush,"INFLU")
-# pragma map(inflate_mask,"INMA")
-# pragma map(inflate_set_dictionary,"INSEDI2")
-# pragma map(inflate_copyright,"INCOPY")
-# pragma map(inflate_trees_bits,"INTRBI")
-# pragma map(inflate_trees_dynamic,"INTRDY")
-# pragma map(inflate_trees_fixed,"INTRFI")
-# pragma map(inflate_trees_free,"INTRFR")
-#endif
-
-#endif /* _ZCONF_H */
+++ /dev/null
-.TH ZLIB 3 "9 July 1998"
-.SH NAME
-zlib \- compression/decompression library
-.SH SYNOPSIS
-[see
-.I zlib.h
-for full description]
-.SH DESCRIPTION
-The
-.I zlib
-library is a general purpose data compression library.
-The code is thread safe.
-It provides in-memory compression and decompression functions,
-including integrity checks of the uncompressed data.
-This version of the library supports only one compression method (deflation)
-but other algorithms will be added later and will have the same stream interface.
-.LP
-Compression can be done in a single step if the buffers are large enough
-(for example if an input file is mmap'ed),
-or can be done by repeated calls of the compression function.
-In the latter case,
-the application must provide more input and/or consume the output
-(providing more output space) before each call.
-.LP
-The library also supports reading and writing files in
-.I gzip
-(.gz) format
-with an interface similar to that of stdio.
-.LP
-The library does not install any signal handler. The decoder checks
-the consistency of the compressed data, so the library should never
-crash even in case of corrupted input.
-.LP
-All functions of the compression library are documented in the file
-.IR zlib.h.
-The distribution source includes examples of use of the library
-the files
-.I example.c
-and
-.IR minigzip.c .
-.LP
-A Java implementation of
-.IR zlib
-is available in the Java Development Kit 1.1
-.IP
-http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
-.LP
-A Perl interface to
-.IR zlib ,
-written by Paul Marquess (pmarquess@bfsec.bt.co.uk)
-is available at CPAN (Comprehensive Perl Archive Network) sites,
-such as:
-.IP
-ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
-.LP
-A Python interface to
-.IR zlib
-written by A.M. Kuchling <amk@magnet.com>
-is available from the Python Software Association sites, such as:
-.IP
-ftp://ftp.python.org/pub/python/contrib/Encoding/zlib*.tar.gz
-.SH "SEE ALSO"
-Questions about zlib should be sent to:
-.IP
-zlib@quest.jpl.nasa.gov
-or, if this fails, to the author addresses given below.
-The zlib home page is:
-.IP
-http://www.cdrom.com/pub/infozip/zlib/
-.LP
-The data format used by the zlib library is described by RFC
-(Request for Comments) 1950 to 1952 in the files:
-.IP
-ftp://ds.internic.net/rfc/rfc1950.txt (zlib format)
-.br
-rfc1951.txt (deflate format)
-.br
-rfc1952.txt (gzip format)
-.LP
-These documents are also available in other formats from:
-.IP
-ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
-.SH AUTHORS
-Version 1.1.3
-Copyright (C) 1995-1998 Jean-loup Gailly (jloup@gzip.org)
-and Mark Adler (madler@alumni.caltech.edu).
-.LP
-This software is provided "as-is,"
-without any express or implied warranty.
-In no event will the authors be held liable for any damages
-arising from the use of this software.
-See the distribution directory with respect to requirements
-governing redistribution.
-The deflate format used by
-.I zlib
-was defined by Phil Katz.
-The deflate and
-.I zlib
-specifications were written by L. Peter Deutsch.
-Thanks to all the people who reported problems and suggested various
-improvements in
-.IR zlib ;
-who are too numerous to cite here.
-.LP
-UNIX manual page by R. P. C. Rodgers,
-U.S. National Library of Medicine (rodgers@nlm.nih.gov).
-.\" end of man page
+++ /dev/null
-# Microsoft Developer Studio Project File - Name="zlib" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Static Library" 0x0104
-
-CFG=zlib - Win32 Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE
-!MESSAGE NMAKE /f "zlib.mak".
-!MESSAGE
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "zlib.mak" CFG="zlib - Win32 Debug"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "zlib - Win32 Release" (based on "Win32 (x86) Static Library")
-!MESSAGE "zlib - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF "$(CFG)" == "zlib - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-
-!ELSEIF "$(CFG)" == "zlib - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Debug"
-# PROP Intermediate_Dir "Debug"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-
-!ENDIF
-
-# Begin Target
-
-# Name "zlib - Win32 Release"
-# Name "zlib - Win32 Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE=.\adler32.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\compress.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\crc32.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\deflate.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\gzio.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\infblock.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\infcodes.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\inffast.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\inflate.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\inftrees.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\infutil.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\trees.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\uncompr.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\zutil.c
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# End Group
-# End Target
-# End Project
+++ /dev/null
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "zlib"=".\zlib.dsp" - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-
+++ /dev/null
-/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.1.3, July 9th, 1998
-
- Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Jean-loup Gailly Mark Adler
- jloup@gzip.org madler@alumni.caltech.edu
-
-
- The data format used by the zlib library is described by RFCs (Request for
- Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
- (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-#include "zconf.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define ZLIB_VERSION "1.1.3"
-
-/*
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms will be added later and will have the same
- stream interface.
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
- (providing more output space) before each call.
-
- The library also supports reading and writing files in gzip (.gz) format
- with an interface similar to that of stdio.
-
- The library does not install any signal handler. The decoder checks
- the consistency of the compressed data, so the library should never
- crash even in case of corrupted input.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void (*free_func) OF((voidpf opaque, voidpf address));
-
-struct internal_state;
-
-typedef struct z_stream_s {
- Bytef *next_in; /* next input byte */
- uInt avail_in; /* number of bytes available at next_in */
- uLong total_in; /* total nb of input bytes read so far */
-
- Bytef *next_out; /* next output byte should be put there */
- uInt avail_out; /* remaining free space at next_out */
- uLong total_out; /* total nb of bytes output so far */
-
- char *msg; /* last error message, NULL if no error */
- struct internal_state FAR *state; /* not visible by applications */
-
- alloc_func zalloc; /* used to allocate the internal state */
- free_func zfree; /* used to free the internal state */
- voidpf opaque; /* private data object passed to zalloc and zfree */
-
- int data_type; /* best guess about the data type: ascii or binary */
- uLong adler; /* adler32 value of the uncompressed data */
- uLong reserved; /* reserved for future use */
-} z_stream;
-
-typedef z_stream FAR *z_streamp;
-
-/*
- The application must update next_in and avail_in when avail_in has
- dropped to zero. It must update next_out and avail_out when avail_out
- has dropped to zero. The application must initialize zalloc, zfree and
- opaque before calling the init function. All other fields are set by the
- compression library and must not be updated by the application.
-
- The opaque value provided by the application will be passed as the first
- parameter for calls of zalloc and zfree. This can be useful for custom
- memory management. The compression library attaches no meaning to the
- opaque value.
-
- zalloc must return Z_NULL if there is not enough memory for the object.
- If zlib is used in a multi-threaded application, zalloc and zfree must be
- thread safe.
-
- On 16-bit systems, the functions zalloc and zfree must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by zalloc for objects of exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
- The fields total_in and total_out can be used for statistics or
- progress reports. After compression, total_in holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step).
-*/
-
- /* constants */
-
-#define Z_NO_FLUSH 0
-#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
-#define Z_SYNC_FLUSH 2
-#define Z_FULL_FLUSH 3
-#define Z_FINISH 4
-/* Allowed flush values; see deflate() below for details */
-
-#define Z_OK 0
-#define Z_STREAM_END 1
-#define Z_NEED_DICT 2
-#define Z_ERRNO (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR (-3)
-#define Z_MEM_ERROR (-4)
-#define Z_BUF_ERROR (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION 0
-#define Z_BEST_SPEED 1
-#define Z_BEST_COMPRESSION 9
-#define Z_DEFAULT_COMPRESSION (-1)
-/* compression levels */
-
-#define Z_FILTERED 1
-#define Z_HUFFMAN_ONLY 2
-#define Z_DEFAULT_STRATEGY 0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY 0
-#define Z_ASCII 1
-#define Z_UNKNOWN 2
-/* Possible values of the data_type field */
-
-#define Z_DEFLATED 8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions < 1.0.2 */
-
- /* basic functions */
-
-ZEXTERN const char * ZEXPORT zlibVersion OF((void));
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- This check is automatically made by deflateInit and inflateInit.
- */
-
-/*
-ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
-
- Initializes the internal stream state for compression. The fields
- zalloc, zfree and opaque must be initialized before by the caller.
- If zalloc and zfree are set to Z_NULL, deflateInit updates them to
- use default allocation functions.
-
- The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
- 1 gives best speed, 9 gives best compression, 0 gives no compression at
- all (the input data is simply copied a block at a time).
- Z_DEFAULT_COMPRESSION requests a default compromise between speed and
- compression (currently equivalent to level 6).
-
- deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if level is not a valid compression level,
- Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
- with the version assumed by the caller (ZLIB_VERSION).
- msg is set to null if there is no error message. deflateInit does not
- perform any compression: this will be done by deflate().
-*/
-
-
-ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
-/*
- deflate compresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce some
- output latency (reading input without producing any output) except when
- forced to flush.
-
- The detailed semantics are as follows. deflate performs one or both of the
- following actions:
-
- - Compress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in and avail_in are updated and
- processing will resume at this point for the next call of deflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. This action is forced if the parameter flush is non zero.
- Forcing flush frequently degrades the compression ratio, so this parameter
- should be set only when necessary (in interactive applications).
- Some output may be provided even if flush is not set.
-
- Before the call of deflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating avail_in or avail_out accordingly; avail_out
- should never be zero before the call. The application can consume the
- compressed output when it wants, for example when the output buffer is full
- (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
- and with zero avail_out, it must be called again after making room in the
- output buffer because there might be more output pending.
-
- If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
- flushed to the output buffer and the output is aligned on a byte boundary, so
- that the decompressor can get all input data available so far. (In particular
- avail_in is zero after the call if enough output space has been provided
- before the call.) Flushing may degrade compression for some compression
- algorithms and so it should be used only when necessary.
-
- If flush is set to Z_FULL_FLUSH, all output is flushed as with
- Z_SYNC_FLUSH, and the compression state is reset so that decompression can
- restart from this point if previous compressed data has been damaged or if
- random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
- the compression.
-
- If deflate returns with avail_out == 0, this function must be called again
- with the same value of the flush parameter and more output space (updated
- avail_out), until the flush is complete (deflate returns with non-zero
- avail_out).
-
- If the parameter flush is set to Z_FINISH, pending input is processed,
- pending output is flushed and deflate returns with Z_STREAM_END if there
- was enough output space; if deflate returns with Z_OK, this function must be
- called again with Z_FINISH and more output space (updated avail_out) but no
- more input data, until it returns with Z_STREAM_END or an error. After
- deflate has returned Z_STREAM_END, the only possible operations on the
- stream are deflateReset or deflateEnd.
-
- Z_FINISH can be used immediately after deflateInit if all the compression
- is to be done in a single step. In this case, avail_out must be at least
- 0.1% larger than avail_in plus 12 bytes. If deflate does not return
- Z_STREAM_END, then it must be called again as described above.
-
- deflate() sets strm->adler to the adler32 checksum of all input read
- so far (that is, total_in bytes).
-
- deflate() may update data_type if it can make a good guess about
- the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
- binary. This field is only for information purposes and does not affect
- the compression algorithm in any manner.
-
- deflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if all input has been
- consumed and all output has been produced (only when flush is set to
- Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
- if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
- (for example avail_in or avail_out was zero).
-*/
-
-
-ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
- stream state was inconsistent, Z_DATA_ERROR if the stream was freed
- prematurely (some input or output was discarded). In the error case,
- msg may be set but then points to a static string (which must not be
- deallocated).
-*/
-
-
-/*
-ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
-
- Initializes the internal stream state for decompression. The fields
- next_in, avail_in, zalloc, zfree and opaque must be initialized before by
- the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
- value depends on the compression method), inflateInit determines the
- compression method from the zlib header and allocates all data structures
- accordingly; otherwise the allocation will be deferred to the first call of
- inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
- use default allocation functions.
-
- inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
- version assumed by the caller. msg is set to null if there is no error
- message. inflateInit does not perform any decompression apart from reading
- the zlib header if present: this will be done by inflate(). (So next_in and
- avail_in may be modified, but next_out and avail_out are unchanged.)
-*/
-
-
-ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
-/*
- inflate decompresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may some
- introduce some output latency (reading input without producing any output)
- except when forced to flush.
-
- The detailed semantics are as follows. inflate performs one or both of the
- following actions:
-
- - Decompress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in is updated and processing
- will resume at this point for the next call of inflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. inflate() provides as much output as possible, until there
- is no more input data or no more space in the output buffer (see below
- about the flush parameter).
-
- Before the call of inflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (avail_out == 0), or after each
- call of inflate(). If inflate returns Z_OK and with zero avail_out, it
- must be called again after making room in the output buffer because there
- might be more output pending.
-
- If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
- output as possible to the output buffer. The flushing behavior of inflate is
- not specified for values of the flush parameter other than Z_SYNC_FLUSH
- and Z_FINISH, but the current implementation actually flushes as much output
- as possible anyway.
-
- inflate() should normally be called until it returns Z_STREAM_END or an
- error. However if all decompression is to be performed in a single step
- (a single call of inflate), the parameter flush should be set to
- Z_FINISH. In this case all pending input is processed and all pending
- output is flushed; avail_out must be large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be inflateEnd to deallocate the decompression state. The use of Z_FINISH
- is never required, but can be used to inform inflate that a faster routine
- may be used for the single inflate() call.
-
- If a preset dictionary is needed at this point (see inflateSetDictionary
- below), inflate sets strm-adler to the adler32 checksum of the
- dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise
- it sets strm->adler to the adler32 checksum of all output produced
- so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
- an error code as described below. At the end of the stream, inflate()
- checks that its computed adler32 checksum is equal to that saved by the
- compressor and returns Z_STREAM_END only if the checksum is correct.
-
- inflate() returns Z_OK if some progress has been made (more input processed
- or more output produced), Z_STREAM_END if the end of the compressed data has
- been reached and all uncompressed output has been produced, Z_NEED_DICT if a
- preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
- corrupted (input stream not conforming to the zlib format or incorrect
- adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
- (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if no progress is possible or if there was not
- enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
- case, the application may then call inflateSync to look for a good
- compression block.
-*/
-
-
-ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
- was inconsistent. In the error case, msg may be set but then points to a
- static string (which must not be deallocated).
-*/
-
- /* Advanced functions */
-
-/*
- The following functions are needed only in some special applications.
-*/
-
-/*
-ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
- int level,
- int method,
- int windowBits,
- int memLevel,
- int strategy));
-
- This is another version of deflateInit with more compression options. The
- fields next_in, zalloc, zfree and opaque must be initialized before by
- the caller.
-
- The method parameter is the compression method. It must be Z_DEFLATED in
- this version of the library.
-
- The windowBits parameter is the base two logarithm of the window size
- (the size of the history buffer). It should be in the range 8..15 for this
- version of the library. Larger values of this parameter result in better
- compression at the expense of memory usage. The default value is 15 if
- deflateInit is used instead.
-
- The memLevel parameter specifies how much memory should be allocated
- for the internal compression state. memLevel=1 uses minimum memory but
- is slow and reduces compression ratio; memLevel=9 uses maximum memory
- for optimal speed. The default value is 8. See zconf.h for total memory
- usage as a function of windowBits and memLevel.
-
- The strategy parameter is used to tune the compression algorithm. Use the
- value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
- filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
- string match). Filtered data consists mostly of small values with a
- somewhat random distribution. In this case, the compression algorithm is
- tuned to compress them better. The effect of Z_FILTERED is to force more
- Huffman coding and less string matching; it is somewhat intermediate
- between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
- the compression ratio but not the correctness of the compressed output even
- if it is not set appropriately.
-
- deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
- method). msg is set to null if there is no error message. deflateInit2 does
- not perform any compression: this will be done by deflate().
-*/
-
-ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
- const Bytef *dictionary,
- uInt dictLength));
-/*
- Initializes the compression dictionary from the given byte sequence
- without producing any compressed output. This function must be called
- immediately after deflateInit, deflateInit2 or deflateReset, before any
- call of deflate. The compressor and decompressor must use exactly the same
- dictionary (see inflateSetDictionary).
-
- The dictionary should consist of strings (byte sequences) that are likely
- to be encountered later in the data to be compressed, with the most commonly
- used strings preferably put towards the end of the dictionary. Using a
- dictionary is most useful when the data to be compressed is short and can be
- predicted with good accuracy; the data can then be compressed better than
- with the default empty dictionary.
-
- Depending on the size of the compression data structures selected by
- deflateInit or deflateInit2, a part of the dictionary may in effect be
- discarded, for example if the dictionary is larger than the window size in
- deflate or deflate2. Thus the strings most likely to be useful should be
- put at the end of the dictionary, not at the front.
-
- Upon return of this function, strm->adler is set to the Adler32 value
- of the dictionary; the decompressor may later use this value to determine
- which dictionary has been used by the compressor. (The Adler32 value
- applies to the whole dictionary even if only a subset of the dictionary is
- actually used by the compressor.)
-
- deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
- inconsistent (for example if deflate has already been called for this stream
- or if the compression method is bsort). deflateSetDictionary does not
- perform any compression: this will be done by deflate().
-*/
-
-ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
- z_streamp source));
-/*
- Sets the destination stream as a complete copy of the source stream.
-
- This function can be useful when several compression strategies will be
- tried, for example when there are several ways of pre-processing the input
- data with a filter. The streams that will be discarded should then be freed
- by calling deflateEnd. Note that deflateCopy duplicates the internal
- compression state which can be quite large, so this strategy is slow and
- can consume lots of memory.
-
- deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being NULL). msg is left unchanged in both source and
- destination.
-*/
-
-ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
-/*
- This function is equivalent to deflateEnd followed by deflateInit,
- but does not free and reallocate all the internal compression state.
- The stream will keep the same compression level and any other attributes
- that may have been set by deflateInit2.
-
- deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
- int level,
- int strategy));
-/*
- Dynamically update the compression level and compression strategy. The
- interpretation of level and strategy is as in deflateInit2. This can be
- used to switch between compression and straight copy of the input data, or
- to switch to a different kind of input data requiring a different
- strategy. If the compression level is changed, the input available so far
- is compressed with the old level (and may be flushed); the new level will
- take effect only at the next call of deflate().
-
- Before the call of deflateParams, the stream state must be set as for
- a call of deflate(), since the currently available input may have to
- be compressed and flushed. In particular, strm->avail_out must be non-zero.
-
- deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
- stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
- if strm->avail_out was zero.
-*/
-
-/*
-ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
- int windowBits));
-
- This is another version of inflateInit with an extra parameter. The
- fields next_in, avail_in, zalloc, zfree and opaque must be initialized
- before by the caller.
-
- The windowBits parameter is the base two logarithm of the maximum window
- size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library. The default value is 15 if inflateInit is used
- instead. If a compressed stream with a larger window size is given as
- input, inflate() will return with the error code Z_DATA_ERROR instead of
- trying to allocate a larger window.
-
- inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
- memLevel). msg is set to null if there is no error message. inflateInit2
- does not perform any decompression apart from reading the zlib header if
- present: this will be done by inflate(). (So next_in and avail_in may be
- modified, but next_out and avail_out are unchanged.)
-*/
-
-ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
- const Bytef *dictionary,
- uInt dictLength));
-/*
- Initializes the decompression dictionary from the given uncompressed byte
- sequence. This function must be called immediately after a call of inflate
- if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
- can be determined from the Adler32 value returned by this call of
- inflate. The compressor and decompressor must use exactly the same
- dictionary (see deflateSetDictionary).
-
- inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
- inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
- expected one (incorrect Adler32 value). inflateSetDictionary does not
- perform any decompression: this will be done by subsequent calls of
- inflate().
-*/
-
-ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
-/*
- Skips invalid compressed data until a full flush point (see above the
- description of deflate with Z_FULL_FLUSH) can be found, or until all
- available input is skipped. No output is provided.
-
- inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
- if no more input was provided, Z_DATA_ERROR if no flush point has been found,
- or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
- case, the application may save the current current value of total_in which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call inflateSync, providing more input each time,
- until success or end of the input data.
-*/
-
-ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
-/*
- This function is equivalent to inflateEnd followed by inflateInit,
- but does not free and reallocate all the internal decompression state.
- The stream will keep attributes that may have been set by inflateInit2.
-
- inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-
- /* utility functions */
-
-/*
- The following utility functions are implemented on top of the
- basic stream-oriented functions. To simplify the interface, some
- default options are assumed (compression level and memory usage,
- standard memory allocation functions). The source code of these
- utility functions can easily be modified if you need special options.
-*/
-
-ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen));
-/*
- Compresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be at least 0.1% larger than
- sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
- compressed buffer.
- This function can be used to compress a whole file at once if the
- input file is mmap'ed.
- compress returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer.
-*/
-
-ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen,
- int level));
-/*
- Compresses the source buffer into the destination buffer. The level
- parameter has the same meaning as in deflateInit. sourceLen is the byte
- length of the source buffer. Upon entry, destLen is the total size of the
- destination buffer, which must be at least 0.1% larger than sourceLen plus
- 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
-
- compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_BUF_ERROR if there was not enough room in the output buffer,
- Z_STREAM_ERROR if the level parameter is invalid.
-*/
-
-ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen));
-/*
- Decompresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be large enough to hold the
- entire uncompressed data. (The size of the uncompressed data must have
- been saved previously by the compressor and transmitted to the decompressor
- by some mechanism outside the scope of this compression library.)
- Upon exit, destLen is the actual size of the compressed buffer.
- This function can be used to decompress a whole file at once if the
- input file is mmap'ed.
-
- uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer, or Z_DATA_ERROR if the input data was corrupted.
-*/
-
-
-typedef voidp gzFile;
-
-ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
-/*
- Opens a gzip (.gz) file for reading or writing. The mode parameter
- is as in fopen ("rb" or "wb") but can also include a compression level
- ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
- Huffman only compression as in "wb1h". (See the description
- of deflateInit2 for more information about the strategy parameter.)
-
- gzopen can be used to read a file which is not in gzip format; in this
- case gzread will directly read from the file without decompression.
-
- gzopen returns NULL if the file could not be opened or if there was
- insufficient memory to allocate the (de)compression state; errno
- can be checked to distinguish the two cases (if errno is zero, the
- zlib error is Z_MEM_ERROR). */
-
-ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
-/*
- gzdopen() associates a gzFile with the file descriptor fd. File
- descriptors are obtained from calls like open, dup, creat, pipe or
- fileno (in the file has been previously opened with fopen).
- The mode parameter is as in gzopen.
- The next call of gzclose on the returned gzFile will also close the
- file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
- descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
- gzdopen returns NULL if there was insufficient memory to allocate
- the (de)compression state.
-*/
-
-ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
-/*
- Dynamically update the compression level or strategy. See the description
- of deflateInit2 for the meaning of these parameters.
- gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
- opened for writing.
-*/
-
-ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
-/*
- Reads the given number of uncompressed bytes from the compressed file.
- If the input file was not in gzip format, gzread copies the given number
- of bytes into the buffer.
- gzread returns the number of uncompressed bytes actually read (0 for
- end of file, -1 for error). */
-
-ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
- const voidp buf, unsigned len));
-/*
- Writes the given number of uncompressed bytes into the compressed file.
- gzwrite returns the number of uncompressed bytes actually written
- (0 in case of error).
-*/
-
-ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
-/*
- Converts, formats, and writes the args to the compressed file under
- control of the format string, as in fprintf. gzprintf returns the number of
- uncompressed bytes actually written (0 in case of error).
-*/
-
-ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
-/*
- Writes the given null-terminated string to the compressed file, excluding
- the terminating null character.
- gzputs returns the number of characters written, or -1 in case of error.
-*/
-
-ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
-/*
- Reads bytes from the compressed file until len-1 characters are read, or
- a newline character is read and transferred to buf, or an end-of-file
- condition is encountered. The string is then terminated with a null
- character.
- gzgets returns buf, or Z_NULL in case of error.
-*/
-
-ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
-/*
- Writes c, converted to an unsigned char, into the compressed file.
- gzputc returns the value that was written, or -1 in case of error.
-*/
-
-ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
-/*
- Reads one byte from the compressed file. gzgetc returns this byte
- or -1 in case of end of file or error.
-*/
-
-ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
-/*
- Flushes all pending output into the compressed file. The parameter
- flush is as in the deflate() function. The return value is the zlib
- error number (see function gzerror below). gzflush returns Z_OK if
- the flush parameter is Z_FINISH and all output could be flushed.
- gzflush should be called only when strictly necessary because it can
- degrade compression.
-*/
-
-ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
- z_off_t offset, int whence));
-/*
- Sets the starting position for the next gzread or gzwrite on the
- given compressed file. The offset represents a number of bytes in the
- uncompressed data stream. The whence parameter is defined as in lseek(2);
- the value SEEK_END is not supported.
- If the file is opened for reading, this function is emulated but can be
- extremely slow. If the file is opened for writing, only forward seeks are
- supported; gzseek then compresses a sequence of zeroes up to the new
- starting position.
-
- gzseek returns the resulting offset location as measured in bytes from
- the beginning of the uncompressed stream, or -1 in case of error, in
- particular if the file is opened for writing and the new starting position
- would be before the current position.
-*/
-
-ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
-/*
- Rewinds the given file. This function is supported only for reading.
-
- gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
-*/
-
-ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
-/*
- Returns the starting position for the next gzread or gzwrite on the
- given compressed file. This position represents a number of bytes in the
- uncompressed data stream.
-
- gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
-*/
-
-ZEXTERN int ZEXPORT gzeof OF((gzFile file));
-/*
- Returns 1 when EOF has previously been detected reading the given
- input stream, otherwise zero.
-*/
-
-ZEXTERN int ZEXPORT gzclose OF((gzFile file));
-/*
- Flushes all pending output if necessary, closes the compressed file
- and deallocates all the (de)compression state. The return value is the zlib
- error number (see function gzerror below).
-*/
-
-ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
-/*
- Returns the error message for the last error which occurred on the
- given compressed file. errnum is set to zlib error number. If an
- error occurred in the file system and not in the compression library,
- errnum is set to Z_ERRNO and the application may consult errno
- to get the exact error code.
-*/
-
- /* checksum functions */
-
-/*
- These functions are not related to compression but are exported
- anyway because they might be useful in applications using the
- compression library.
-*/
-
-ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
-/*
- Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is NULL, this function returns
- the required initial value for the checksum.
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster. Usage example:
-
- uLong adler = adler32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- adler = adler32(adler, buffer, length);
- }
- if (adler != original_adler) error();
-*/
-
-ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
-/*
- Update a running crc with the bytes buf[0..len-1] and return the updated
- crc. If buf is NULL, this function returns the required initial value
- for the crc. Pre- and post-conditioning (one's complement) is performed
- within this function so it shouldn't be done by the application.
- Usage example:
-
- uLong crc = crc32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- crc = crc32(crc, buffer, length);
- }
- if (crc != original_crc) error();
-*/
-
-
- /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
- const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
- const char *version, int stream_size));
-ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
- int windowBits, int memLevel,
- int strategy, const char *version,
- int stream_size));
-ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
- const char *version, int stream_size));
-#define deflateInit(strm, level) \
- deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
- inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
- deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
- (strategy), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
- inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
-
-
-#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
- struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-ZEXTERN const char * ZEXPORT zError OF((int err));
-ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z));
-ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _ZLIB_H */
+++ /dev/null
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include "zutil.h"
-
-struct internal_state {int dummy;}; /* for buggy compilers */
-
-#ifndef STDC
-extern void exit OF((int));
-#endif
-
-const char *z_errmsg[10] = {
-"need dictionary", /* Z_NEED_DICT 2 */
-"stream end", /* Z_STREAM_END 1 */
-"", /* Z_OK 0 */
-"file error", /* Z_ERRNO (-1) */
-"stream error", /* Z_STREAM_ERROR (-2) */
-"data error", /* Z_DATA_ERROR (-3) */
-"insufficient memory", /* Z_MEM_ERROR (-4) */
-"buffer error", /* Z_BUF_ERROR (-5) */
-"incompatible version",/* Z_VERSION_ERROR (-6) */
-""};
-
-
-const char * ZEXPORT zlibVersion()
-{
- return ZLIB_VERSION;
-}
-
-#ifdef DEBUG
-
-# ifndef verbose
-# define verbose 0
-# endif
-int z_verbose = verbose;
-
-void z_error (m)
- char *m;
-{
- fprintf(stderr, "%s\n", m);
- exit(1);
-}
-#endif
-
-/* exported to allow conversion of error code to string for compress() and
- * uncompress()
- */
-const char * ZEXPORT zError(err)
- int err;
-{
- return ERR_MSG(err);
-}
-
-
-#ifndef HAVE_MEMCPY
-
-void zmemcpy(dest, source, len)
- Bytef* dest;
- const Bytef* source;
- uInt len;
-{
- if (len == 0) return;
- do {
- *dest++ = *source++; /* ??? to be unrolled */
- } while (--len != 0);
-}
-
-int zmemcmp(s1, s2, len)
- const Bytef* s1;
- const Bytef* s2;
- uInt len;
-{
- uInt j;
-
- for (j = 0; j < len; j++) {
- if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
- }
- return 0;
-}
-
-void zmemzero(dest, len)
- Bytef* dest;
- uInt len;
-{
- if (len == 0) return;
- do {
- *dest++ = 0; /* ??? to be unrolled */
- } while (--len != 0);
-}
-#endif
-
-#ifdef __TURBOC__
-#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__)
-/* Small and medium model in Turbo C are for now limited to near allocation
- * with reduced MAX_WBITS and MAX_MEM_LEVEL
- */
-# define MY_ZCALLOC
-
-/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
- * and farmalloc(64K) returns a pointer with an offset of 8, so we
- * must fix the pointer. Warning: the pointer must be put back to its
- * original form in order to free it, use zcfree().
- */
-
-#define MAX_PTR 10
-/* 10*64K = 640K */
-
-local int next_ptr = 0;
-
-typedef struct ptr_table_s {
- voidpf org_ptr;
- voidpf new_ptr;
-} ptr_table;
-
-local ptr_table table[MAX_PTR];
-/* This table is used to remember the original form of pointers
- * to large buffers (64K). Such pointers are normalized with a zero offset.
- * Since MSDOS is not a preemptive multitasking OS, this table is not
- * protected from concurrent access. This hack doesn't work anyway on
- * a protected system like OS/2. Use Microsoft C instead.
- */
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
- voidpf buf = opaque; /* just to make some compilers happy */
- ulg bsize = (ulg)items*size;
-
- /* If we allocate less than 65520 bytes, we assume that farmalloc
- * will return a usable pointer which doesn't have to be normalized.
- */
- if (bsize < 65520L) {
- buf = farmalloc(bsize);
- if (*(ush*)&buf != 0) return buf;
- } else {
- buf = farmalloc(bsize + 16L);
- }
- if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
- table[next_ptr].org_ptr = buf;
-
- /* Normalize the pointer to seg:0 */
- *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
- *(ush*)&buf = 0;
- table[next_ptr++].new_ptr = buf;
- return buf;
-}
-
-void zcfree (voidpf opaque, voidpf ptr)
-{
- int n;
- if (*(ush*)&ptr != 0) { /* object < 64K */
- farfree(ptr);
- return;
- }
- /* Find the original pointer */
- for (n = 0; n < next_ptr; n++) {
- if (ptr != table[n].new_ptr) continue;
-
- farfree(table[n].org_ptr);
- while (++n < next_ptr) {
- table[n-1] = table[n];
- }
- next_ptr--;
- return;
- }
- ptr = opaque; /* just to make some compilers happy */
- Assert(0, "zcfree: ptr not found");
-}
-#endif
-#endif /* __TURBOC__ */
-
-
-#if defined(M_I86) && !defined(__32BIT__)
-/* Microsoft C in 16-bit mode */
-
-# define MY_ZCALLOC
-
-#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
-# define _halloc halloc
-# define _hfree hfree
-#endif
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
- if (opaque) opaque = 0; /* to make compiler happy */
- return _halloc((long)items, size);
-}
-
-void zcfree (voidpf opaque, voidpf ptr)
-{
- if (opaque) opaque = 0; /* to make compiler happy */
- _hfree(ptr);
-}
-
-#endif /* MSC */
-
-
-#ifndef MY_ZCALLOC /* Any system without a special alloc function */
-
-#ifndef STDC
-extern voidp calloc OF((uInt items, uInt size));
-extern void free OF((voidpf ptr));
-#endif
-
-voidpf zcalloc (opaque, items, size)
- voidpf opaque;
- unsigned items;
- unsigned size;
-{
- if (opaque) items += size - size; /* make compiler happy */
- return (voidpf)calloc(items, size);
-}
-
-void zcfree (opaque, ptr)
- voidpf opaque;
- voidpf ptr;
-{
- free(ptr);
- if (opaque) return; /* make compiler happy */
-}
-
-#endif /* MY_ZCALLOC */
+++ /dev/null
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* @(#) $Id$ */
-
-#ifndef _Z_UTIL_H
-#define _Z_UTIL_H
-
-#include "zlib.h"
-
-#ifdef STDC
-# include <stddef.h>
-# include <string.h>
-# include <stdlib.h>
-#endif
-#ifdef NO_ERRNO_H
- extern int errno;
-#else
-# include <errno.h>
-#endif
-
-#ifndef local
-# define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-typedef unsigned char uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long ulg;
-
-extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
-/* (size given to avoid silly warnings with Visual C++) */
-
-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
-
-#define ERR_RETURN(strm,err) \
- return (strm->msg = (char*)ERR_MSG(err), (err))
-/* To be used only when the state is known to be valid */
-
- /* common constants */
-
-#ifndef DEF_WBITS
-# define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-# define DEF_MEM_LEVEL 8
-#else
-# define DEF_MEM_LEVEL MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES 2
-/* The three kinds of block type */
-
-#define MIN_MATCH 3
-#define MAX_MATCH 258
-/* The minimum and maximum match lengths */
-
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-
- /* target dependencies */
-
-#ifdef MSDOS
-# define OS_CODE 0x00
-# if defined(__TURBOC__) || defined(__BORLANDC__)
-# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
- /* Allow compilation with ANSI keywords only enabled */
- void _Cdecl farfree( void *block );
- void *_Cdecl farmalloc( unsigned long nbytes );
-# else
-# include <alloc.h>
-# endif
-# else /* MSC or DJGPP */
-# include <malloc.h>
-# endif
-#endif
-
-#ifdef OS2
-# define OS_CODE 0x06
-#endif
-
-#ifdef WIN32 /* Window 95 & Windows NT */
-# define OS_CODE 0x0b
-#endif
-
-#if defined(VAXC) || defined(VMS)
-# define OS_CODE 0x02
-# define F_OPEN(name, mode) \
- fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
-#endif
-
-#ifdef AMIGA
-# define OS_CODE 0x01
-#endif
-
-#if defined(ATARI) || defined(atarist)
-# define OS_CODE 0x05
-#endif
-
-#if defined(MACOS) || defined(TARGET_OS_MAC)
-# define OS_CODE 0x07
-# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-# include <unix.h> /* for fdopen */
-# else
-# ifndef fdopen
-# define fdopen(fd,mode) NULL /* No fdopen() */
-# endif
-# endif
-#endif
-
-#ifdef __50SERIES /* Prime/PRIMOS */
-# define OS_CODE 0x0F
-#endif
-
-#ifdef TOPS20
-# define OS_CODE 0x0a
-#endif
-
-#if defined(_BEOS_) || defined(RISCOS)
-# define fdopen(fd,mode) NULL /* No fdopen() */
-#endif
-
-#if (defined(_MSC_VER) && (_MSC_VER > 600))
-# define fdopen(fd,type) _fdopen(fd,type)
-#endif
-
-
- /* Common defaults */
-
-#ifndef OS_CODE
-# define OS_CODE 0x03 /* assume Unix */
-#endif
-
-#ifndef F_OPEN
-# define F_OPEN(name, mode) fopen((name), (mode))
-#endif
-
- /* functions */
-
-#ifdef HAVE_STRERROR
- extern char *strerror OF((int));
-# define zstrerror(errnum) strerror(errnum)
-#else
-# define zstrerror(errnum) ""
-#endif
-
-#if defined(pyr)
-# define NO_MEMCPY
-#endif
-#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
- /* Use our own functions for small and medium model with MSC <= 5.0.
- * You may have to use the same strategy for Borland C (untested).
- * The __SC__ check is for Symantec.
- */
-# define NO_MEMCPY
-#endif
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-# define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-# ifdef SMALL_MEDIUM /* MSDOS small or medium model */
-# define zmemcpy _fmemcpy
-# define zmemcmp _fmemcmp
-# define zmemzero(dest, len) _fmemset(dest, 0, len)
-# else
-# define zmemcpy memcpy
-# define zmemcmp memcmp
-# define zmemzero(dest, len) memset(dest, 0, len)
-# endif
-#else
- extern void zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
- extern int zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
- extern void zmemzero OF((Bytef* dest, uInt len));
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# include <stdio.h>
- extern int z_verbose;
- extern void z_error OF((char *m));
-# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-# define Trace(x) {if (z_verbose>=0) fprintf x ;}
-# define Tracev(x) {if (z_verbose>0) fprintf x ;}
-# define Tracevv(x) {if (z_verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-
-typedef uLong (ZEXPORT *check_func) OF((uLong check, const Bytef *buf,
- uInt len));
-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-void zcfree OF((voidpf opaque, voidpf ptr));
-
-#define ZALLOC(strm, items, size) \
- (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-
-#endif /* _Z_UTIL_H */
--- /dev/null
+
+ ChangeLog file for zlib
+
+Changes in 1.1.4 (11 March 2002)
+- ZFREE was repeated on same allocation on some error conditions.
+ This creates a security problem described in
+ http://www.zlib.org/advisory-2002-03-11.txt
+- Returned incorrect error (Z_MEM_ERROR) on some invalid data
+- Avoid accesses before window for invalid distances with inflate window
+ less than 32K.
+- force windowBits > 8 to avoid a bug in the encoder for a window size
+ of 256 bytes. (A complete fix will be available in 1.1.5).
+
+Changes in 1.1.3 (9 July 1998)
+- fix "an inflate input buffer bug that shows up on rare but persistent
+ occasions" (Mark)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
+- fix gzseek(..., SEEK_SET) in write mode
+- fix crc check after a gzeek (Frank Faubert)
+- fix miniunzip when the last entry in a zip file is itself a zip file
+ (J Lillge)
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
+ See http://www.muppetlabs.com/~breadbox/software/assembly.html
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
+
+- Support gzdopen on Mac with Metrowerks (Jason Linhart)
+- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
+- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
+- avoid some warnings with Borland C (Tom Tanner)
+- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
+- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant)
+- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
+- use libdir and includedir in Makefile.in (Tim Mooney)
+- support shared libraries on OSF1 V4 (Tim Mooney)
+- remove so_locations in "make clean" (Tim Mooney)
+- fix maketree.c compilation error (Glenn, Mark)
+- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
+- new Makefile.riscos (Rich Walker)
+- initialize static descriptors in trees.c for embedded targets (Nick Smith)
+- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
+- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
+- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
+- fix maketree.c to allow clean compilation of inffixed.h (Mark)
+- fix parameter check in deflateCopy (Gunther Nikl)
+- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
+- Many portability patches by Christian Spieler:
+ . zutil.c, zutil.h: added "const" for zmem*
+ . Make_vms.com: fixed some typos
+ . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
+ . msdos/Makefile.msc: remove "default rtl link library" info from obj files
+ . msdos/Makefile.*: use model-dependent name for the built zlib library
+ . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
+ new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
+- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
+- replace __far with _far for better portability (Christian Spieler, Tom Lane)
+- fix test for errno.h in configure (Tim Newsham)
+
+Changes in 1.1.2 (19 March 98)
+- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
+ See http://www.winimage.com/zLibDll/unzip.html
+- preinitialize the inflate tables for fixed codes, to make the code
+ completely thread safe (Mark)
+- some simplifications and slight speed-up to the inflate code (Mark)
+- fix gzeof on non-compressed files (Allan Schrum)
+- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
+- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
+- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
+- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
+- do not wrap extern "C" around system includes (Tom Lane)
+- mention zlib binding for TCL in README (Andreas Kupries)
+- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
+- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
+- allow "configure --prefix $HOME" (Tim Mooney)
+- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
+- move Makefile.sas to amiga/Makefile.sas
+
+Changes in 1.1.1 (27 Feb 98)
+- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson)
+- remove block truncation heuristic which had very marginal effect for zlib
+ (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+ compression ratio on some files. This also allows inlining _tr_tally for
+ matches in deflate_slow.
+- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
+
+Changes in 1.1.0 (24 Feb 98)
+- do not return STREAM_END prematurely in inflate (John Bowler)
+- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
+- compile with -DFASTEST to get compression code optimized for speed only
+- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
+- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
+ on Sun but significant on HP)
+
+- add a pointer to experimental unzip library in README (Gilles Vollant)
+- initialize variable gcc in configure (Chris Herborth)
+
+Changes in 1.0.9 (17 Feb 1998)
+- added gzputs and gzgets functions
+- do not clear eof flag in gzseek (Mark Diekhans)
+- fix gzseek for files in transparent mode (Mark Diekhans)
+- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
+- replace EXPORT with ZEXPORT to avoid conflict with other programs
+- added compress2 in zconf.h, zlib.def, zlib.dnt
+- new asm code from Gilles Vollant in contrib/asm386
+- simplify the inflate code (Mark):
+ . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
+ . ZALLOC the length list in inflate_trees_fixed() instead of using stack
+ . ZALLOC the value area for huft_build() instead of using stack
+ . Simplify Z_FINISH check in inflate()
+
+- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
+- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
+- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
+ the declaration of FAR (Gilles VOllant)
+- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
+- read_buf buf parameter of type Bytef* instead of charf*
+- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
+- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
+- fix check for presence of directories in "make install" (Ian Willis)
+
+Changes in 1.0.8 (27 Jan 1998)
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
+- added compress2() to allow setting the compression level
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
+- use constant arrays for the static trees in trees.c instead of computing
+ them at run time (thanks to Ken Raeburn for this suggestion). To create
+ trees.h, compile with GEN_TREES_H and run "make test".
+- check return code of example in "make test" and display result
+- pass minigzip command line options to file_compress
+- simplifying code of inflateSync to avoid gcc 2.8 bug
+
+- support CC="gcc -Wall" in configure -s (QingLong)
+- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
+- fix test for shared library support to avoid compiler warnings
+- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
+- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
+- do not use fdopen for Metrowerks on Mac (Brad Pettit))
+- add checks for gzputc and gzputc in example.c
+- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
+- use const for the CRC table (Ken Raeburn)
+- fixed "make uninstall" for shared libraries
+- use Tracev instead of Trace in infblock.c
+- in example.c use correct compressed length for test_sync
+- suppress +vnocompatwarnings in configure for HPUX (not always supported)
+
+Changes in 1.0.7 (20 Jan 1998)
+- fix gzseek which was broken in write mode
+- return error for gzseek to negative absolute position
+- fix configure for Linux (Chun-Chung Chen)
+- increase stack space for MSC (Tim Wegner)
+- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
+- define EXPORTVA for gzprintf (Gilles Vollant)
+- added man page zlib.3 (Rick Rodgers)
+- for contrib/untgz, fix makedir() and improve Makefile
+
+- check gzseek in write mode in example.c
+- allocate extra buffer for seeks only if gzseek is actually called
+- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
+- add inflateSyncPoint in zconf.h
+- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
+
+Changes in 1.0.6 (19 Jan 1998)
+- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
+ gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
+- Fix a deflate bug occuring only with compression level 0 (thanks to
+ Andy Buckler for finding this one).
+- In minigzip, pass transparently also the first byte for .Z files.
+- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
+- check Z_FINISH in inflate (thanks to Marc Schluper)
+- Implement deflateCopy (thanks to Adam Costello)
+- make static libraries by default in configure, add --shared option.
+- move MSDOS or Windows specific files to directory msdos
+- suppress the notion of partial flush to simplify the interface
+ (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
+- suppress history buffer provided by application to simplify the interface
+ (this feature was not implemented anyway in 1.0.4)
+- next_in and avail_in must be initialized before calling inflateInit or
+ inflateInit2
+- add EXPORT in all exported functions (for Windows DLL)
+- added Makefile.nt (thanks to Stephen Williams)
+- added the unsupported "contrib" directory:
+ contrib/asm386/ by Gilles Vollant <info@winimage.com>
+ 386 asm code replacing longest_match().
+ contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+ A C++ I/O streams interface to the zlib gz* functions
+ contrib/iostream2/ by Tyge LΓΈvset <Tyge.Lovset@cmr.no>
+ Another C++ I/O streams interface
+ contrib/untgz/ by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+ A very simple tar.gz file extractor using zlib
+ contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+ How to use compress(), uncompress() and the gz* functions from VB.
+- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
+ level) in minigzip (thanks to Tom Lane)
+
+- use const for rommable constants in deflate
+- added test for gzseek and gztell in example.c
+- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
+- add undocumented function zError to convert error code to string
+ (for Tim Smithers)
+- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
+- Use default memcpy for Symantec MSDOS compiler.
+- Add EXPORT keyword for check_func (needed for Windows DLL)
+- add current directory to LD_LIBRARY_PATH for "make test"
+- create also a link for libz.so.1
+- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
+- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
+- added -soname for Linux in configure (Chun-Chung Chen,
+- assign numbers to the exported functions in zlib.def (for Windows DLL)
+- add advice in zlib.h for best usage of deflateSetDictionary
+- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
+- allow compilation with ANSI keywords only enabled for TurboC in large model
+- avoid "versionString"[0] (Borland bug)
+- add NEED_DUMMY_RETURN for Borland
+- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
+- allow compilation with CC
+- defined STDC for OS/2 (David Charlap)
+- limit external names to 8 chars for MVS (Thomas Lund)
+- in minigzip.c, use static buffers only for 16-bit systems
+- fix suffix check for "minigzip -d foo.gz"
+- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
+- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
+- added makelcc.bat for lcc-win32 (Tom St Denis)
+- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
+- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
+- check for unistd.h in configure (for off_t)
+- remove useless check parameter in inflate_blocks_free
+- avoid useless assignment of s->check to itself in inflate_blocks_new
+- do not flush twice in gzclose (thanks to Ken Raeburn)
+- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
+- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
+- work around buggy fclose on pipes for HP/UX
+- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
+- fix configure if CC is already equal to gcc
+
+Changes in 1.0.5 (3 Jan 98)
+- Fix inflate to terminate gracefully when fed corrupted or invalid data
+- Use const for rommable constants in inflate
+- Eliminate memory leaks on error conditions in inflate
+- Removed some vestigial code in inflate
+- Update web address in README
+
+Changes in 1.0.4 (24 Jul 96)
+- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
+ bit, so the decompressor could decompress all the correct data but went
+ on to attempt decompressing extra garbage data. This affected minigzip too.
+- zlibVersion and gzerror return const char* (needed for DLL)
+- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
+- use z_error only for DEBUG (avoid problem with DLLs)
+
+Changes in 1.0.3 (2 Jul 96)
+- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
+ small and medium models; this makes the library incompatible with previous
+ versions for these models. (No effect in large model or on other systems.)
+- return OK instead of BUF_ERROR if previous deflate call returned with
+ avail_out as zero but there is nothing to do
+- added memcmp for non STDC compilers
+- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
+- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
+- better check for 16-bit mode MSC (avoids problem with Symantec)
+
+Changes in 1.0.2 (23 May 96)
+- added Windows DLL support
+- added a function zlibVersion (for the DLL support)
+- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
+- Bytef is define's instead of typedef'd only for Borland C
+- avoid reading uninitialized memory in example.c
+- mention in README that the zlib format is now RFC1950
+- updated Makefile.dj2
+- added algorithm.doc
+
+Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
+- fix array overlay in deflate.c which sometimes caused bad compressed data
+- fix inflate bug with empty stored block
+- fix MSDOS medium model which was broken in 0.99
+- fix deflateParams() which could generated bad compressed data.
+- Bytef is define'd instead of typedef'ed (work around Borland bug)
+- added an INDEX file
+- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
+ Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
+- speed up adler32 for modern machines without auto-increment
+- added -ansi for IRIX in configure
+- static_init_done in trees.c is an int
+- define unlink as delete for VMS
+- fix configure for QNX
+- add configure branch for SCO and HPUX
+- avoid many warnings (unused variables, dead assignments, etc...)
+- no fdopen for BeOS
+- fix the Watcom fix for 32 bit mode (define FAR as empty)
+- removed redefinition of Byte for MKWERKS
+- work around an MWKERKS bug (incorrect merge of all .h files)
+
+Changes in 0.99 (27 Jan 96)
+- allow preset dictionary shared between compressor and decompressor
+- allow compression level 0 (no compression)
+- add deflateParams in zlib.h: allow dynamic change of compression level
+ and compression strategy.
+- test large buffers and deflateParams in example.c
+- add optional "configure" to build zlib as a shared library
+- suppress Makefile.qnx, use configure instead
+- fixed deflate for 64-bit systems (detected on Cray)
+- fixed inflate_blocks for 64-bit systems (detected on Alpha)
+- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
+- always return Z_BUF_ERROR when deflate() has nothing to do
+- deflateInit and inflateInit are now macros to allow version checking
+- prefix all global functions and types with z_ with -DZ_PREFIX
+- make falloc completely reentrant (inftrees.c)
+- fixed very unlikely race condition in ct_static_init
+- free in reverse order of allocation to help memory manager
+- use zlib-1.0/* instead of zlib/* inside the tar.gz
+- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
+ -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
+- allow gzread on concatenated .gz files
+- deflateEnd now returns Z_DATA_ERROR if it was premature
+- deflate is finally (?) fully deterministic (no matches beyond end of input)
+- Document Z_SYNC_FLUSH
+- add uninstall in Makefile
+- Check for __cpluplus in zlib.h
+- Better test in ct_align for partial flush
+- avoid harmless warnings for Borland C++
+- initialize hash_head in deflate.c
+- avoid warning on fdopen (gzio.c) for HP cc -Aa
+- include stdlib.h for STDC compilers
+- include errno.h for Cray
+- ignore error if ranlib doesn't exist
+- call ranlib twice for NeXTSTEP
+- use exec_prefix instead of prefix for libz.a
+- renamed ct_* as _tr_* to avoid conflict with applications
+- clear z->msg in inflateInit2 before any error return
+- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
+- fixed typo in zconf.h (_GNUC__ => __GNUC__)
+- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
+- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
+- in fcalloc, normalize pointer if size > 65520 bytes
+- don't use special fcalloc for 32 bit Borland C++
+- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
+- use Z_BINARY instead of BINARY
+- document that gzclose after gzdopen will close the file
+- allow "a" as mode in gzopen.
+- fix error checking in gzread
+- allow skipping .gz extra-field on pipes
+- added reference to Perl interface in README
+- put the crc table in FAR data (I dislike more and more the medium model :)
+- added get_crc_table
+- added a dimension to all arrays (Borland C can't count).
+- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
+- guard against multiple inclusion of *.h (for precompiled header on Mac)
+- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
+- don't use unsized arrays to avoid silly warnings by Visual C++:
+ warning C4746: 'inflate_mask' : unsized array treated as '__far'
+ (what's wrong with far data in far model?).
+- define enum out of inflate_blocks_state to allow compilation with C++
+
+Changes in 0.95 (16 Aug 95)
+- fix MSDOS small and medium model (now easier to adapt to any compiler)
+- inlined send_bits
+- fix the final (:-) bug for deflate with flush (output was correct but
+ not completely flushed in rare occasions).
+- default window size is same for compression and decompression
+ (it's now sufficient to set MAX_WBITS in zconf.h).
+- voidp -> voidpf and voidnp -> voidp (for consistency with other
+ typedefs and because voidnp was not near in large model).
+
+Changes in 0.94 (13 Aug 95)
+- support MSDOS medium model
+- fix deflate with flush (could sometimes generate bad output)
+- fix deflateReset (zlib header was incorrectly suppressed)
+- added support for VMS
+- allow a compression level in gzopen()
+- gzflush now calls fflush
+- For deflate with flush, flush even if no more input is provided.
+- rename libgz.a as libz.a
+- avoid complex expression in infcodes.c triggering Turbo C bug
+- work around a problem with gcc on Alpha (in INSERT_STRING)
+- don't use inline functions (problem with some gcc versions)
+- allow renaming of Byte, uInt, etc... with #define.
+- avoid warning about (unused) pointer before start of array in deflate.c
+- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
+- avoid reserved word 'new' in trees.c
+
+Changes in 0.93 (25 June 95)
+- temporarily disable inline functions
+- make deflate deterministic
+- give enough lookahead for PARTIAL_FLUSH
+- Set binary mode for stdin/stdout in minigzip.c for OS/2
+- don't even use signed char in inflate (not portable enough)
+- fix inflate memory leak for segmented architectures
+
+Changes in 0.92 (3 May 95)
+- don't assume that char is signed (problem on SGI)
+- Clear bit buffer when starting a stored block
+- no memcpy on Pyramid
+- suppressed inftest.c
+- optimized fill_window, put longest_match inline for gcc
+- optimized inflate on stored blocks.
+- untabify all sources to simplify patches
+
+Changes in 0.91 (2 May 95)
+- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
+- Document the memory requirements in zconf.h
+- added "make install"
+- fix sync search logic in inflateSync
+- deflate(Z_FULL_FLUSH) now works even if output buffer too short
+- after inflateSync, don't scare people with just "lo world"
+- added support for DJGPP
+
+Changes in 0.9 (1 May 95)
+- don't assume that zalloc clears the allocated memory (the TurboC bug
+ was Mark's bug after all :)
+- let again gzread copy uncompressed data unchanged (was working in 0.71)
+- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
+- added a test of inflateSync in example.c
+- moved MAX_WBITS to zconf.h because users might want to change that.
+- document explicitly that zalloc(64K) on MSDOS must return a normalized
+ pointer (zero offset)
+- added Makefiles for Microsoft C, Turbo C, Borland C++
+- faster crc32()
+
+Changes in 0.8 (29 April 95)
+- added fast inflate (inffast.c)
+- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
+ is incompatible with previous versions of zlib which returned Z_OK.
+- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
+ (actually that was not a compiler bug, see 0.81 above)
+- gzread no longer reads one extra byte in certain cases
+- In gzio destroy(), don't reference a freed structure
+- avoid many warnings for MSDOS
+- avoid the ERROR symbol which is used by MS Windows
+
+Changes in 0.71 (14 April 95)
+- Fixed more MSDOS compilation problems :( There is still a bug with
+ TurboC large model.
+
+Changes in 0.7 (14 April 95)
+- Added full inflate support.
+- Simplified the crc32() interface. The pre- and post-conditioning
+ (one's complement) is now done inside crc32(). WARNING: this is
+ incompatible with previous versions; see zlib.h for the new usage.
+
+Changes in 0.61 (12 April 95)
+- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
+
+Changes in 0.6 (11 April 95)
+- added minigzip.c
+- added gzdopen to reopen a file descriptor as gzFile
+- added transparent reading of non-gziped files in gzread.
+- fixed bug in gzread (don't read crc as data)
+- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
+- don't allocate big arrays in the stack (for MSDOS)
+- fix some MSDOS compilation problems
+
+Changes in 0.5:
+- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
+ not yet Z_FULL_FLUSH.
+- support decompression but only in a single step (forced Z_FINISH)
+- added opaque object for zalloc and zfree.
+- added deflateReset and inflateReset
+- added a variable zlib_version for consistency checking.
+- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
+ Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
+
+Changes in 0.4:
+- avoid "zip" everywhere, use zlib instead of ziplib.
+- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
+ if compression method == 8.
+- added adler32 and crc32
+- renamed deflateOptions as deflateInit2, call one or the other but not both
+- added the method parameter for deflateInit2.
+- added inflateInit2
+- simplied considerably deflateInit and inflateInit by not supporting
+ user-provided history buffer. This is supported only in deflateInit2
+ and inflateInit2.
+
+Changes in 0.3:
+- prefix all macro names with Z_
+- use Z_FINISH instead of deflateEnd to finish compression.
+- added Z_HUFFMAN_ONLY
+- added gzerror()
--- /dev/null
+
+ Frequently Asked Questions about zlib
+
+
+If your question is not there, please check the zlib home page
+http://www.zlib.org which may have more recent information.
+The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
+
+
+ 1. Is zlib Y2K-compliant?
+
+ Yes. zlib doesn't handle dates.
+
+ 2. Where can I get a Windows DLL version?
+
+ The zlib sources can be compiled without change to produce a DLL. If you
+ want a precompiled DLL, see http://www.winimage.com/zLibDll/ . Questions
+ about the zlib DLL should be sent to Gilles Vollant (info@winimage.com).
+
+ 3. Where can I get a Visual Basic interface to zlib?
+
+ See
+ * http://www.winimage.com/zLibDll/cmp-z-it.zip
+ * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm
+ * contrib/visual-basic.txt in the zlib distribution
+
+ 4. compress() returns Z_BUF_ERROR
+
+ Make sure that before the call of compress, the length of the compressed
+ buffer is equal to the total size of the compressed buffer and not
+ zero. For Visual Basic, check that this parameter is passed by reference
+ ("as any"), not by value ("as long").
+
+ 5. deflate() or inflate() returns Z_BUF_ERROR
+
+ Before making the call, make sure that avail_in and avail_out are not
+ zero. When setting the parameter flush equal to Z_FINISH, also make sure
+ that avail_out is big enough to allow processing all pending input.
+
+ 6. Where's the zlib documentation (man pages, etc.)?
+
+ It's in zlib.h for the moment, and Francis S. Lin has converted it to a
+ web page zlib.html. Volunteers to transform this to Unix-style man pages,
+ please contact Jean-loup Gailly (jloup@gzip.org). Examples of zlib usage
+ are in the files example.c and minigzip.c.
+
+ 7. Why don't you use GNU autoconf or libtool or ...?
+
+ Because we would like to keep zlib as a very small and simple
+ package. zlib is rather portable and doesn't need much configuration.
+
+ 8. I found a bug in zlib.
+
+ Most of the time, such problems are due to an incorrect usage of
+ zlib. Please try to reproduce the problem with a small program and send
+ the corresponding source to us at zlib@gzip.org . Do not send
+ multi-megabyte data files without prior agreement.
+
+ 9. Why do I get "undefined reference to gzputc"?
+
+ If "make test" produces something like
+
+ example.o(.text+0x154): undefined reference to `gzputc'
+
+ check that you don't have old files libz.* in /usr/lib, /usr/local/lib or
+ /usr/X11R6/lib. Remove any old versions, then do "make install".
+
+10. I need a Delphi interface to zlib.
+
+ See the directories contrib/delphi and contrib/delphi2 in the zlib
+ distribution.
+
+11. Can zlib handle .zip archives?
+
+ See the directory contrib/minizip in the zlib distribution.
+
+12. Can zlib handle .Z files?
+
+ No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt
+ the code of uncompress on your own.
+
+13. How can I make a Unix shared library?
+
+ make clean
+ ./configure -s
+ make
+
+14. Why does "make test" fail on Mac OS X?
+
+ Mac OS X already includes zlib as a shared library, and so -lz links the
+ shared library instead of the one that the "make" compiled. For zlib
+ 1.1.3, the two are incompatible due to different compile-time
+ options. Simply change the -lz in the Makefile to libz.a, and it will use
+ the compiled library instead of the shared one and the "make test" will
+ succeed.
+
+15. I have a question about OttoPDF
+
+ We are not the authors of OttoPDF. The real author is on the OttoPDF web
+ site Joel Hainley jhainley@myndkryme.com.
--- /dev/null
+ChangeLog history of changes
+INDEX this file
+FAQ Frequently Asked Questions about zlib
+Make_vms.com script for Vax/VMS
+Makefile makefile for Unix (generated by configure)
+Makefile.in makefile for Unix (template for configure)
+Makefile.riscos makefile for RISCOS
+README guess what
+algorithm.txt description of the (de)compression algorithm
+configure configure script for Unix
+descrip.mms makefile for Vax/VMS
+zlib.3 mini man page for zlib (volunteers to write full
+ man pages from zlib.h welcome. write to jloup@gzip.org)
+
+amiga/Makefile.sas makefile for Amiga SAS/C
+amiga/Makefile.pup makefile for Amiga powerUP SAS/C PPC
+
+msdos/Makefile.w32 makefile for Microsoft Visual C++ 32-bit
+msdos/Makefile.b32 makefile for Borland C++ 32-bit
+msdos/Makefile.bor makefile for Borland C/C++ 16-bit
+msdos/Makefile.dj2 makefile for DJGPP 2.x
+msdos/Makefile.emx makefile for EMX 0.9c (32-bit DOS/OS2)
+msdos/Makefile.msc makefile for Microsoft C 16-bit
+msdos/Makefile.tc makefile for Turbo C
+msdos/Makefile.wat makefile for Watcom C
+msdos/zlib.def definition file for Windows DLL
+msdos/zlib.rc definition file for Windows DLL
+
+nt/Makefile.nt makefile for Windows NT
+nt/zlib.dnt definition file for Windows NT DLL
+nt/Makefile.emx makefile for EMX 0.9c/RSXNT 1.41 (Win32 Intel)
+nt/Makefile.gcc makefile for Windows NT using GCC (mingw32)
+
+
+ zlib public header files (must be kept):
+zconf.h
+zlib.h
+
+ private source files used to build the zlib library:
+adler32.c
+compress.c
+crc32.c
+deflate.c
+deflate.h
+gzio.c
+infblock.c
+infblock.h
+infcodes.c
+infcodes.h
+inffast.c
+inffast.h
+inflate.c
+inftrees.c
+inftrees.h
+infutil.c
+infutil.h
+maketree.c
+trees.c
+uncompr.c
+zutil.c
+zutil.h
+
+ source files for sample programs:
+example.c
+minigzip.c
+
+ unsupported contribution by third parties
+
+contrib/asm386/ by Gilles Vollant <info@winimage.com>
+ 386 asm code replacing longest_match().
+
+contrib/minizip/ by Gilles Vollant <info@winimage.com>
+ Mini zip and unzip based on zlib
+ See http://www.winimage.com/zLibDll/unzip.html
+
+contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+ A C++ I/O streams interface to the zlib gz* functions
+
+contrib/iostream2/ by Tyge LΓΈvset <Tyge.Lovset@cmr.no>
+ Another C++ I/O streams interface
+
+contrib/untgz/ by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+ A very simple tar.gz extractor using zlib
+
+contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+ How to use compress(), uncompress() and the gz* functions from VB.
--- /dev/null
+$! make libz under VMS
+$! written by Martin P.J. Zinser <m.zinser@gsi.de>
+$!
+$! Look for the compiler used
+$!
+$ ccopt = ""
+$ if f$getsyi("HW_MODEL").ge.1024
+$ then
+$ ccopt = "/prefix=all"+ccopt
+$ comp = "__decc__=1"
+$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
+$ else
+$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs.""
+$ then
+$ comp = "__vaxc__=1"
+$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
+$ else
+$ if f$trnlnm("SYS").eqs."" then define sys decc$library_include:
+$ ccopt = "/decc/prefix=all"+ccopt
+$ comp = "__decc__=1"
+$ endif
+$ endif
+$!
+$! Build the thing plain or with mms
+$!
+$ write sys$output "Compiling Zlib sources ..."
+$ if f$search("SYS$SYSTEM:MMS.EXE").eqs.""
+$ then
+$ dele example.obj;*,minigzip.obj;*
+$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
+ adler32.c zlib.h zconf.h
+$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
+ compress.c zlib.h zconf.h
+$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
+ crc32.c zlib.h zconf.h
+$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
+ deflate.c deflate.h zutil.h zlib.h zconf.h
+$ CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
+ gzio.c zutil.h zlib.h zconf.h
+$ CALL MAKE infblock.OBJ "CC ''CCOPT' infblock" -
+ infblock.c zutil.h zlib.h zconf.h infblock.h
+$ CALL MAKE infcodes.OBJ "CC ''CCOPT' infcodes" -
+ infcodes.c zutil.h zlib.h zconf.h inftrees.h
+$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
+ inffast.c zutil.h zlib.h zconf.h inffast.h
+$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
+ inflate.c zutil.h zlib.h zconf.h infblock.h
+$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
+ inftrees.c zutil.h zlib.h zconf.h inftrees.h
+$ CALL MAKE infutil.OBJ "CC ''CCOPT' infutil" -
+ infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
+ trees.c deflate.h zutil.h zlib.h zconf.h
+$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
+ uncompr.c zlib.h zconf.h
+$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
+ zutil.c zutil.h zlib.h zconf.h
+$ write sys$output "Building Zlib ..."
+$ CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
+$ write sys$output "Building example..."
+$ CALL MAKE example.OBJ "CC ''CCOPT' example" -
+ example.c zlib.h zconf.h
+$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
+$ write sys$output "Building minigzip..."
+$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
+ minigzip.c zlib.h zconf.h
+$ call make minigzip.exe -
+ "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
+ minigzip.obj libz.olb
+$ else
+$ mms/macro=('comp')
+$ endif
+$ write sys$output "Zlib build completed"
+$ exit
+$!
+$!
+$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES
+$ V = 'F$Verify(0)
+$! P1 = What we are trying to make
+$! P2 = Command to make it
+$! P3 - P8 What it depends on
+$
+$ If F$Search(P1) .Eqs. "" Then Goto Makeit
+$ Time = F$CvTime(F$File(P1,"RDT"))
+$arg=3
+$Loop:
+$ Argument = P'arg
+$ If Argument .Eqs. "" Then Goto Exit
+$ El=0
+$Loop2:
+$ File = F$Element(El," ",Argument)
+$ If File .Eqs. " " Then Goto Endl
+$ AFile = ""
+$Loop3:
+$ OFile = AFile
+$ AFile = F$Search(File)
+$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
+$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
+$ Goto Loop3
+$NextEL:
+$ El = El + 1
+$ Goto Loop2
+$EndL:
+$ arg=arg+1
+$ If arg .Le. 8 Then Goto Loop
+$ Goto Exit
+$
+$Makeit:
+$ VV=F$VERIFY(0)
+$ write sys$output P2
+$ 'P2
+$ VV='F$Verify(VV)
+$Exit:
+$ If V Then Set Verify
+$ENDSUBROUTINE
--- /dev/null
+# Makefile for zlib
+# Copyright (C) 1995-2002 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile and test, type:
+# ./configure; make test
+# The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
+
+# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
+# make install
+# To install in $HOME instead of /usr/local, use:
+# make install prefix=$HOME
+
+CC=cc
+
+CFLAGS=-O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+# -Wstrict-prototypes -Wmissing-prototypes
+
+LDFLAGS=-L. -lz
+LDSHARED=$(CC)
+CPP=$(CC) -E
+
+VER=1.1.4
+LIBS=libz.a
+SHAREDLIB=libz.so
+
+AR=ar rc
+RANLIB=ranlib
+TAR=tar
+SHELL=/bin/sh
+
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+ zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+OBJA =
+# to use the asm code: make OBJA=match.o
+
+TEST_OBJS = example.o minigzip.o
+
+DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
+ algorithm.txt zlib.3 zlib.html \
+ msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+ nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
+ contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
+ contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
+ contrib/asm[56]86/*.S contrib/iostream/*.cpp \
+ contrib/iostream/*.h contrib/iostream2/*.h contrib/iostream2/*.cpp \
+ contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
+ contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
+ contrib/delphi*/*.???
+
+all: example minigzip
+
+test: all
+ @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+ echo hello world | ./minigzip | ./minigzip -d || \
+ echo ' *** minigzip test FAILED ***' ; \
+ if ./example; then \
+ echo ' *** zlib test OK ***'; \
+ else \
+ echo ' *** zlib test FAILED ***'; \
+ fi
+
+libz.a: $(OBJS) $(OBJA)
+ $(AR) $@ $(OBJS) $(OBJA)
+ -@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+match.o: match.S
+ $(CPP) match.S > _match.s
+ $(CC) -c _match.s
+ mv _match.o match.o
+ rm -f _match.s
+
+$(SHAREDLIB).$(VER): $(OBJS)
+ $(LDSHARED) -o $@ $(OBJS)
+ rm -f $(SHAREDLIB) $(SHAREDLIB).1
+ ln -s $@ $(SHAREDLIB)
+ ln -s $@ $(SHAREDLIB).1
+
+example: example.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+install: $(LIBS)
+ -@if [ ! -d $(includedir) ]; then mkdir $(includedir); fi
+ -@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
+ cp zlib.h zconf.h $(includedir)
+ chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+ cp $(LIBS) $(libdir)
+ cd $(libdir); chmod 755 $(LIBS)
+ -@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+ cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
+ rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
+ ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
+ ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
+ (ldconfig || true) >/dev/null 2>&1; \
+ fi
+# The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
+
+uninstall:
+ cd $(includedir); \
+ v=$(VER); \
+ if test -f zlib.h; then \
+ v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+ rm -f zlib.h zconf.h; \
+ fi; \
+ cd $(libdir); rm -f libz.a; \
+ if test -f $(SHAREDLIB).$$v; then \
+ rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
+ fi
+
+clean:
+ rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
+ _match.s maketree
+
+distclean: clean
+
+zip:
+ mv Makefile Makefile~; cp -p Makefile.in Makefile
+ rm -f test.c ztest*.c contrib/minizip/test.zip
+ v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+ zip -ul9 zlib$$v $(DISTFILES)
+ mv Makefile~ Makefile
+
+dist:
+ mv Makefile Makefile~; cp -p Makefile.in Makefile
+ rm -f test.c ztest*.c contrib/minizip/test.zip
+ d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+ rm -f $$d.tar.gz; \
+ if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
+ files=""; \
+ for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
+ cd ..; \
+ GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
+ if test ! -d $$d; then rm -f $$d; fi
+ mv Makefile~ Makefile
+
+tags:
+ etags *.[ch]
+
+depend:
+ makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
+infcodes.o: zutil.h zlib.h zconf.h
+infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h
+inffast.o: infblock.h infcodes.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h
--- /dev/null
+## Process this file with automake to produce Makefile.in
+
+#AUTOMAKE_OPTIONS = foreign
+
+# read local config files
+#ACLOCAL_M4 = $(top_srcdir)/config/aclocal.m4
+#AUTOHEADER = @AUTOHEADER@ --localdir=$(top_srcdir)/config
+
+EXTRA_DIST= ChangeLog FAQ INDEX README README.rrdtool algorithm.txt zlib.dsp zlib.dsw zlib.3
+
+CFLAGS = $(ZLIB_CFLAGS)
+
+noinst_LTLIBRARIES = librrd_z.la
+
+librrd_z_la_SOURCES = \
+ adler32.c \
+ compress.c \
+ crc32.c \
+ deflate.c \
+ gzio.c \
+ infblock.c \
+ infcodes.c \
+ inffast.c \
+ inflate.c \
+ inftrees.c \
+ infutil.c \
+ trees.c \
+ uncompr.c \
+ zutil.c \
+ deflate.h infcodes.h inffixed.h infutil.h zconf.h zutil.h \
+ infblock.h inffast.h inftrees.h trees.h zlib.h
--- /dev/null
+## Process this file with automake to produce Makefile.in
+
+#AUTOMAKE_OPTIONS = foreign
+
+# read local config files
+#ACLOCAL_M4 = $(top_srcdir)/config/aclocal.m4
+#AUTOHEADER = @AUTOHEADER@ --localdir=$(top_srcdir)/config
+
+EXTRA_DIST= ChangeLog FAQ INDEX README README.rrdtool algorithm.txt zlib.dsp zlib.dsw zlib.3
+
+CFLAGS = $(ZLIB_CFLAGS)
+
+noinst_LTLIBRARIES = librrd_z.la
+
+librrd_z_la_SOURCES = \
+ adler32.c \
+ compress.c \
+ crc32.c \
+ deflate.c \
+ gzio.c \
+ infblock.c \
+ infcodes.c \
+ inffast.c \
+ inflate.c \
+ inftrees.c \
+ infutil.c \
+ trees.c \
+ uncompr.c \
+ zutil.c \
+ deflate.h infcodes.h inffixed.h infutil.h zconf.h zutil.h \
+ infblock.h inffast.h inftrees.h trees.h zlib.h
--- /dev/null
+# Makefile for zlib
+# Copyright (C) 1995-2002 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile and test, type:
+# ./configure; make test
+# The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
+
+# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
+# make install
+# To install in $HOME instead of /usr/local, use:
+# make install prefix=$HOME
+
+CC=cc
+
+CFLAGS=-O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+# -Wstrict-prototypes -Wmissing-prototypes
+
+LDFLAGS=-L. -lz
+LDSHARED=$(CC)
+CPP=$(CC) -E
+
+VER=1.1.4
+LIBS=libz.a
+SHAREDLIB=libz.so
+
+AR=ar rc
+RANLIB=ranlib
+TAR=tar
+SHELL=/bin/sh
+
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+ zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+OBJA =
+# to use the asm code: make OBJA=match.o
+
+TEST_OBJS = example.o minigzip.o
+
+DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
+ algorithm.txt zlib.3 zlib.html \
+ msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+ nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
+ contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
+ contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
+ contrib/asm[56]86/*.S contrib/iostream/*.cpp \
+ contrib/iostream/*.h contrib/iostream2/*.h contrib/iostream2/*.cpp \
+ contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
+ contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
+ contrib/delphi*/*.???
+
+all: example minigzip
+
+test: all
+ @LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+ echo hello world | ./minigzip | ./minigzip -d || \
+ echo ' *** minigzip test FAILED ***' ; \
+ if ./example; then \
+ echo ' *** zlib test OK ***'; \
+ else \
+ echo ' *** zlib test FAILED ***'; \
+ fi
+
+libz.a: $(OBJS) $(OBJA)
+ $(AR) $@ $(OBJS) $(OBJA)
+ -@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+match.o: match.S
+ $(CPP) match.S > _match.s
+ $(CC) -c _match.s
+ mv _match.o match.o
+ rm -f _match.s
+
+$(SHAREDLIB).$(VER): $(OBJS)
+ $(LDSHARED) -o $@ $(OBJS)
+ rm -f $(SHAREDLIB) $(SHAREDLIB).1
+ ln -s $@ $(SHAREDLIB)
+ ln -s $@ $(SHAREDLIB).1
+
+example: example.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o $(LIBS)
+ $(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+install: $(LIBS)
+ -@if [ ! -d $(includedir) ]; then mkdir $(includedir); fi
+ -@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
+ cp zlib.h zconf.h $(includedir)
+ chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+ cp $(LIBS) $(libdir)
+ cd $(libdir); chmod 755 $(LIBS)
+ -@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+ cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
+ rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
+ ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
+ ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
+ (ldconfig || true) >/dev/null 2>&1; \
+ fi
+# The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
+
+uninstall:
+ cd $(includedir); \
+ v=$(VER); \
+ if test -f zlib.h; then \
+ v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+ rm -f zlib.h zconf.h; \
+ fi; \
+ cd $(libdir); rm -f libz.a; \
+ if test -f $(SHAREDLIB).$$v; then \
+ rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
+ fi
+
+clean:
+ rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
+ _match.s maketree
+
+distclean: clean
+
+zip:
+ mv Makefile Makefile~; cp -p Makefile.in Makefile
+ rm -f test.c ztest*.c contrib/minizip/test.zip
+ v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+ zip -ul9 zlib$$v $(DISTFILES)
+ mv Makefile~ Makefile
+
+dist:
+ mv Makefile Makefile~; cp -p Makefile.in Makefile
+ rm -f test.c ztest*.c contrib/minizip/test.zip
+ d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+ rm -f $$d.tar.gz; \
+ if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
+ files=""; \
+ for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
+ cd ..; \
+ GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
+ if test ! -d $$d; then rm -f $$d; fi
+ mv Makefile~ Makefile
+
+tags:
+ etags *.[ch]
+
+depend:
+ makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
+infcodes.o: zutil.h zlib.h zconf.h
+infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h
+inffast.o: infblock.h infcodes.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h
--- /dev/null
+# Project: zlib_1_03
+# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430
+# test works out-of-the-box, installs `somewhere' on demand
+
+# Toolflags:
+CCflags = -c -depend !Depend -IC: -g -throwback -DRISCOS -fah
+C++flags = -c -depend !Depend -IC: -throwback
+Linkflags = -aif -c++ -o $@
+ObjAsmflags = -throwback -NoCache -depend !Depend
+CMHGflags =
+LibFileflags = -c -l -o $@
+Squeezeflags = -o $@
+
+# change the line below to where _you_ want the library installed.
+libdest = lib:zlib
+
+# Final targets:
+@.lib: @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
+ @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
+ @.o.uncompr @.o.zutil
+ LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
+ @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
+ @.o.trees @.o.uncompr @.o.zutil
+test: @.minigzip @.example @.lib
+ @copy @.lib @.libc A~C~DF~L~N~P~Q~RS~TV
+ @echo running tests: hang on.
+ @/@.minigzip -f -9 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -f -1 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -h -9 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -h -1 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -9 libc
+ @/@.minigzip -d libc-gz
+ @/@.minigzip -1 libc
+ @/@.minigzip -d libc-gz
+ @diff @.lib @.libc
+ @echo that should have reported '@.lib and @.libc identical' if you have diff.
+ @/@.example @.fred @.fred
+ @echo that will have given lots of hello!'s.
+
+@.minigzip: @.o.minigzip @.lib C:o.Stubs
+ Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs
+@.example: @.o.example @.lib C:o.Stubs
+ Link $(Linkflags) @.o.example @.lib C:o.Stubs
+
+install: @.lib
+ cdir $(libdest)
+ cdir $(libdest).h
+ @copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV
+ @copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV
+ @copy @.lib $(libdest).lib A~C~DF~L~N~P~Q~RS~TV
+ @echo okay, installed zlib in $(libdest)
+
+clean:; remove @.minigzip
+ remove @.example
+ remove @.libc
+ -wipe @.o.* F~r~cV
+ remove @.fred
+
+# User-editable dependencies:
+.c.o:
+ cc $(ccflags) -o $@ $<
+
+# Static dependencies:
+
+# Dynamic dependencies:
+o.example: c.example
+o.example: h.zlib
+o.example: h.zconf
+o.minigzip: c.minigzip
+o.minigzip: h.zlib
+o.minigzip: h.zconf
+o.adler32: c.adler32
+o.adler32: h.zlib
+o.adler32: h.zconf
+o.compress: c.compress
+o.compress: h.zlib
+o.compress: h.zconf
+o.crc32: c.crc32
+o.crc32: h.zlib
+o.crc32: h.zconf
+o.deflate: c.deflate
+o.deflate: h.deflate
+o.deflate: h.zutil
+o.deflate: h.zlib
+o.deflate: h.zconf
+o.gzio: c.gzio
+o.gzio: h.zutil
+o.gzio: h.zlib
+o.gzio: h.zconf
+o.infblock: c.infblock
+o.infblock: h.zutil
+o.infblock: h.zlib
+o.infblock: h.zconf
+o.infblock: h.infblock
+o.infblock: h.inftrees
+o.infblock: h.infcodes
+o.infblock: h.infutil
+o.infcodes: c.infcodes
+o.infcodes: h.zutil
+o.infcodes: h.zlib
+o.infcodes: h.zconf
+o.infcodes: h.inftrees
+o.infcodes: h.infblock
+o.infcodes: h.infcodes
+o.infcodes: h.infutil
+o.infcodes: h.inffast
+o.inffast: c.inffast
+o.inffast: h.zutil
+o.inffast: h.zlib
+o.inffast: h.zconf
+o.inffast: h.inftrees
+o.inffast: h.infblock
+o.inffast: h.infcodes
+o.inffast: h.infutil
+o.inffast: h.inffast
+o.inflate: c.inflate
+o.inflate: h.zutil
+o.inflate: h.zlib
+o.inflate: h.zconf
+o.inflate: h.infblock
+o.inftrees: c.inftrees
+o.inftrees: h.zutil
+o.inftrees: h.zlib
+o.inftrees: h.zconf
+o.inftrees: h.inftrees
+o.inftrees: h.inffixed
+o.infutil: c.infutil
+o.infutil: h.zutil
+o.infutil: h.zlib
+o.infutil: h.zconf
+o.infutil: h.infblock
+o.infutil: h.inftrees
+o.infutil: h.infcodes
+o.infutil: h.infutil
+o.trees: c.trees
+o.trees: h.deflate
+o.trees: h.zutil
+o.trees: h.zlib
+o.trees: h.zconf
+o.trees: h.trees
+o.uncompr: c.uncompr
+o.uncompr: h.zlib
+o.uncompr: h.zconf
+o.zutil: c.zutil
+o.zutil: h.zutil
+o.zutil: h.zlib
+o.zutil: h.zconf
--- /dev/null
+zlib 1.1.4 is a general purpose data compression library. All the code
+is thread safe. The data format used by the zlib library
+is described by RFCs (Request for Comments) 1950 to 1952 in the files
+http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate
+format) and rfc1952.txt (gzip format). These documents are also available in
+other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+
+All functions of the compression library are documented in the file zlib.h
+(volunteer to write man pages welcome, contact jloup@gzip.org). A usage
+example of the library is given in the file example.c which also tests that
+the library is working correctly. Another example is given in the file
+minigzip.c. The compression library itself is composed of all source files
+except example.c and minigzip.c.
+
+To compile all files and run the test program, follow the instructions
+given at the top of Makefile. In short "make test; make install"
+should work for most machines. For Unix: "./configure; make test; make install"
+For MSDOS, use one of the special makefiles such as Makefile.msc.
+For VMS, use Make_vms.com or descrip.mms.
+
+Questions about zlib should be sent to <zlib@gzip.org>, or to
+Gilles Vollant <info@winimage.com> for the Windows DLL version.
+The zlib home page is http://www.zlib.org or http://www.gzip.org/zlib/
+Before reporting a problem, please check this site to verify that
+you have the latest version of zlib; otherwise get the latest version and
+check whether the problem still exists or not.
+
+PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html
+before asking for help.
+
+Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
+issue of Dr. Dobb's Journal; a copy of the article is available in
+http://dogma.net/markn/articles/zlibtool/zlibtool.htm
+
+The changes made in version 1.1.4 are documented in the file ChangeLog.
+The only changes made since 1.1.3 are bug corrections:
+
+- ZFREE was repeated on same allocation on some error conditions.
+ This creates a security problem described in
+ http://www.zlib.org/advisory-2002-03-11.txt
+- Returned incorrect error (Z_MEM_ERROR) on some invalid data
+- Avoid accesses before window for invalid distances with inflate window
+ less than 32K.
+- force windowBits > 8 to avoid a bug in the encoder for a window size
+ of 256 bytes. (A complete fix will be available in 1.1.5).
+
+The beta version 1.1.5beta includes many more changes. A new official
+version 1.1.5 will be released as soon as extensive testing has been
+completed on it.
+
+
+Unsupported third party contributions are provided in directory "contrib".
+
+A Java implementation of zlib is available in the Java Development Kit
+http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+See the zlib home page http://www.zlib.org for details.
+
+A Perl interface to zlib written by Paul Marquess <pmarquess@bfsec.bt.co.uk>
+is in the CPAN (Comprehensive Perl Archive Network) sites
+http://www.cpan.org/modules/by-module/Compress/
+
+A Python interface to zlib written by A.M. Kuchling <amk@magnet.com>
+is available in Python 1.5 and later versions, see
+http://www.python.org/doc/lib/module-zlib.html
+
+A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com>
+is availlable at http://www.westend.com/~kupries/doc/trf/man/man.html
+
+An experimental package to read and write files in .zip format,
+written on top of zlib by Gilles Vollant <info@winimage.com>, is
+available at http://www.winimage.com/zLibDll/unzip.html
+and also in the contrib/minizip directory of zlib.
+
+
+Notes for some targets:
+
+- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc
+ and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL
+ The zlib DLL support was initially done by Alessandro Iacopetti and is
+ now maintained by Gilles Vollant <info@winimage.com>. Check the zlib DLL
+ home page at http://www.winimage.com/zLibDll
+
+ From Visual Basic, you can call the DLL functions which do not take
+ a structure as argument: compress, uncompress and all gz* functions.
+ See contrib/visual-basic.txt for more information, or get
+ http://www.tcfb.com/dowseware/cmp-z-it.zip
+
+- For 64-bit Irix, deflate.c must be compiled without any optimization.
+ With -O, one libpng test fails. The test works in 32 bit mode (with
+ the -n32 compiler flag). The compiler bug has been reported to SGI.
+
+- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1
+ it works when compiled with cc.
+
+- on Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1
+ is necessary to get gzprintf working correctly. This is done by configure.
+
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works
+ with other compilers. Use "make test" to check your compiler.
+
+- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
+
+- For Turbo C the small model is supported only with reduced performance to
+ avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+
+- For PalmOs, see http://www.cs.uit.no/~perm/PASTA/pilot/software.html
+ Per Harald Myrvang <perm@stud.cs.uit.no>
+
+
+Acknowledgments:
+
+ The deflate format used by zlib was defined by Phil Katz. The deflate
+ and zlib specifications were written by L. Peter Deutsch. Thanks to all the
+ people who reported problems and suggested various improvements in zlib;
+ they are too numerous to cite here.
+
+Copyright notice:
+
+ (C) 1995-2002 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jloup@gzip.org madler@alumni.caltech.edu
+
+If you use the zlib library in a product, we would appreciate *not*
+receiving lengthy legal documents to sign. The sources are provided
+for free but without warranty of any kind. The library has been
+entirely written by Jean-loup Gailly and Mark Adler; it does not
+include third-party code.
+
+If you redistribute modified sources, we would appreciate that you include
+in the file ChangeLog history information documenting your changes.
--- /dev/null
+/* adler32.c -- compute the Adler-32 checksum of a data stream
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zlib.h"
+
+#define BASE 65521L /* largest prime smaller than 65536 */
+#define NMAX 5552
+/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
+
+#define DO1(buf,i) {s1 += buf[i]; s2 += s1;}
+#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf) DO8(buf,0); DO8(buf,8);
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(adler, buf, len)
+ uLong adler;
+ const Bytef *buf;
+ uInt len;
+{
+ unsigned long s1 = adler & 0xffff;
+ unsigned long s2 = (adler >> 16) & 0xffff;
+ int k;
+
+ if (buf == Z_NULL) return 1L;
+
+ while (len > 0) {
+ k = len < NMAX ? len : NMAX;
+ len -= k;
+ while (k >= 16) {
+ DO16(buf);
+ buf += 16;
+ k -= 16;
+ }
+ if (k != 0) do {
+ s1 += *buf++;
+ s2 += s1;
+ } while (--k);
+ s1 %= BASE;
+ s2 %= BASE;
+ }
+ return (s2 << 16) | s1;
+}
--- /dev/null
+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data. The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length). Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes. (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The real question is, given a Huffman tree, how to decode fast. The most
+important realization is that shorter codes are much more common than
+longer codes, so pay attention to decoding the short codes fast, and let
+the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code. It gets that many bits from the
+stream, and looks it up in the table. The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table. If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code. However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table. What inflate() does is
+simply to make the number of bits in the first table a variable, and set it
+for the maximum speed.
+
+inflate() sends new trees relatively often, so it is possibly set for a
+smaller first level table than an application that has only one tree for
+all the data. For inflate, which has 286 possible codes for the
+literal/length tree, the size of the first table is nine bits. Also the
+distance trees have 30 possible values, and the size of the first table is
+six bits. Note that for each of those cases, the table ended up one bit
+longer than the ``average'' code length, i.e. the code length of an
+approximately flat code which would be a little more than eight bits for
+286 symbols and a little less than five bits for 30 symbols. It would be
+interesting to see if optimizing the first level table for other
+applications gave values within a bit or two of the flat code size.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually
+looks like. You are correct that it's not a Huffman tree. It is simply a
+lookup table for the first, let's say, nine bits of a Huffman symbol. The
+symbol could be as short as one bit or as long as 15 bits. If a particular
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits. For example, if the
+symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points
+to another similar table for the remaining bits. Again, there are duplicated
+entries as needed. The idea is that most of the time the symbol will be short
+and there will only be one table look up. (That's whole idea behind data
+compression in the first place.) For the less frequent long symbols, there
+will be two lookups. If you had a compression method with really long
+symbols, you could have as many levels of lookups as is efficient. For
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in
+the above example are gobbled), or it contains the translation for the symbol
+and the number of bits to gobble. Then you start again with the next
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the
+longest symbol is? The reason is that if you do that, you end up spending
+more time filling in duplicate symbol entries than you do actually decoding.
+At least for deflate's output that generates new trees every several 10's of
+kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code
+would take too long if you're only decoding several thousand symbols. At the
+other extreme, you could make a new table for every bit in the code. In fact,
+that's essentially a Huffman tree. But then you spend two much time
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode to and how many bits that is, i.e. how
+many bits to gobble. Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to
+be constructed. That's compared to 64 entries for a single table. Or
+compared to 16 entries for a Huffman tree (six two entry tables and one four
+entry table). Assuming that the code ideally represents the probability of
+the symbols, it takes on the average 1.25 lookups per symbol. That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the
+Huffman tree.
+
+There, I think that gives you a picture of what's going on. For inflate, the
+meaning of a particular symbol is often more than just a letter. It can be a
+byte (a "literal"), or it can be either a length or a distance which
+indicates a base value and a number of bits to fetch after the code that is
+added to the base value. Or it might be the special end-of-block code. The
+data structures created in inftrees.c try to encode all that information
+compactly in the tables.
+
+
+Jean-loup Gailly Mark Adler
+jloup@gzip.org madler@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+ftp://ds.internic.net/rfc/rfc1951.txt
--- /dev/null
+/* compress.c -- compress a memory buffer
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zlib.h"
+
+/* ===========================================================================
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in deflateInit. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least 0.1% larger than sourceLen plus
+ 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+ compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+ Z_STREAM_ERROR if the level parameter is invalid.
+*/
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
+ Bytef *dest;
+ uLongf *destLen;
+ const Bytef *source;
+ uLong sourceLen;
+ int level;
+{
+ z_stream stream;
+ int err;
+
+ stream.next_in = (Bytef*)source;
+ stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
+ /* Check for source > 64K on 16-bit machine: */
+ if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+#endif
+ stream.next_out = dest;
+ stream.avail_out = (uInt)*destLen;
+ if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+ stream.zalloc = (alloc_func)0;
+ stream.zfree = (free_func)0;
+ stream.opaque = (voidpf)0;
+
+ err = deflateInit(&stream, level);
+ if (err != Z_OK) return err;
+
+ err = deflate(&stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ deflateEnd(&stream);
+ return err == Z_OK ? Z_BUF_ERROR : err;
+ }
+ *destLen = stream.total_out;
+
+ err = deflateEnd(&stream);
+ return err;
+}
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+ Bytef *dest;
+ uLongf *destLen;
+ const Bytef *source;
+ uLong sourceLen;
+{
+ return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}
--- /dev/null
+/* crc32.c -- compute the CRC-32 of a data stream
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zlib.h"
+
+#define local static
+
+#ifdef DYNAMIC_CRC_TABLE
+
+local int crc_table_empty = 1;
+local uLongf crc_table[256];
+local void make_crc_table OF((void));
+
+/*
+ Generate a table for a byte-wise 32-bit CRC calculation on the polynomial:
+ x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+ Polynomials over GF(2) are represented in binary, one bit per coefficient,
+ with the lowest powers in the most significant bit. Then adding polynomials
+ is just exclusive-or, and multiplying a polynomial by x is a right shift by
+ one. If we call the above polynomial p, and represent a byte as the
+ polynomial q, also with the lowest power in the most significant bit (so the
+ byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+ where a mod b means the remainder after dividing a by b.
+
+ This calculation is done using the shift-register method of multiplying and
+ taking the remainder. The register is initialized to zero, and for each
+ incoming bit, x^32 is added mod p to the register if the bit is a one (where
+ x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+ x (which is shifting right by one and adding x^32 mod p if the bit shifted
+ out is a one). We start with the highest power (least significant bit) of
+ q and repeat for all eight bits of q.
+
+ The table is simply the CRC of all possible eight bit values. This is all
+ the information needed to generate CRC's on data a byte at a time for all
+ combinations of CRC register values and incoming bytes.
+*/
+local void make_crc_table()
+{
+ uLong c;
+ int n, k;
+ uLong poly; /* polynomial exclusive-or pattern */
+ /* terms of polynomial defining this crc (except x^32): */
+ static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+ /* make exclusive-or pattern from polynomial (0xedb88320L) */
+ poly = 0L;
+ for (n = 0; n < sizeof(p)/sizeof(Byte); n++)
+ poly |= 1L << (31 - p[n]);
+
+ for (n = 0; n < 256; n++)
+ {
+ c = (uLong)n;
+ for (k = 0; k < 8; k++)
+ c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+ crc_table[n] = c;
+ }
+ crc_table_empty = 0;
+}
+#else
+/* ========================================================================
+ * Table of CRC-32's of all single-byte values (made by make_crc_table)
+ */
+local const uLongf crc_table[256] = {
+ 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
+ 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
+ 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
+ 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
+ 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
+ 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
+ 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
+ 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
+ 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
+ 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
+ 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
+ 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
+ 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
+ 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
+ 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
+ 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
+ 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
+ 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
+ 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
+ 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
+ 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
+ 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
+ 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
+ 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
+ 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
+ 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
+ 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
+ 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
+ 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
+ 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
+ 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
+ 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
+ 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
+ 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
+ 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
+ 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
+ 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
+ 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
+ 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
+ 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
+ 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
+ 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
+ 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
+ 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
+ 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
+ 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
+ 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
+ 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
+ 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
+ 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
+ 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
+ 0x2d02ef8dL
+};
+#endif
+
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const uLongf * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+ if (crc_table_empty) make_crc_table();
+#endif
+ return (const uLongf *)crc_table;
+}
+
+/* ========================================================================= */
+#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);
+#define DO2(buf) DO1(buf); DO1(buf);
+#define DO4(buf) DO2(buf); DO2(buf);
+#define DO8(buf) DO4(buf); DO4(buf);
+
+/* ========================================================================= */
+uLong ZEXPORT crc32(crc, buf, len)
+ uLong crc;
+ const Bytef *buf;
+ uInt len;
+{
+ if (buf == Z_NULL) return 0L;
+#ifdef DYNAMIC_CRC_TABLE
+ if (crc_table_empty)
+ make_crc_table();
+#endif
+ crc = crc ^ 0xffffffffL;
+ while (len >= 8)
+ {
+ DO8(buf);
+ len -= 8;
+ }
+ if (len) do {
+ DO1(buf);
+ } while (--len);
+ return crc ^ 0xffffffffL;
+}
--- /dev/null
+/* deflate.c -- compress data using the deflation algorithm
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * ALGORITHM
+ *
+ * The "deflation" process depends on being able to identify portions
+ * of the input text which are identical to earlier input (within a
+ * sliding window trailing behind the input currently being processed).
+ *
+ * The most straightforward technique turns out to be the fastest for
+ * most input files: try all possible matches and select the longest.
+ * The key feature of this algorithm is that insertions into the string
+ * dictionary are very simple and thus fast, and deletions are avoided
+ * completely. Insertions are performed at each input character, whereas
+ * string matches are performed only when the previous match ends. So it
+ * is preferable to spend more time in matches to allow very fast string
+ * insertions and avoid deletions. The matching algorithm for small
+ * strings is inspired from that of Rabin & Karp. A brute force approach
+ * is used to find longer strings when a small match has been found.
+ * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
+ * (by Leonid Broukhis).
+ * A previous version of this file used a more sophisticated algorithm
+ * (by Fiala and Greene) which is guaranteed to run in linear amortized
+ * time, but has a larger average cost, uses more memory and is patented.
+ * However the F&G algorithm may be faster for some highly redundant
+ * files if the parameter max_chain_length (described below) is too large.
+ *
+ * ACKNOWLEDGEMENTS
+ *
+ * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
+ * I found it in 'freeze' written by Leonid Broukhis.
+ * Thanks to many people for bug reports and testing.
+ *
+ * REFERENCES
+ *
+ * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
+ * Available in ftp://ds.internic.net/rfc/rfc1951.txt
+ *
+ * A description of the Rabin and Karp algorithm is given in the book
+ * "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
+ *
+ * Fiala,E.R., and Greene,D.H.
+ * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
+ *
+ */
+
+/* @(#) $Id$ */
+
+#include "deflate.h"
+
+const char deflate_copyright[] =
+ " deflate 1.1.4 Copyright 1995-2002 Jean-loup Gailly ";
+/*
+ If you use the zlib library in a product, an acknowledgment is welcome
+ in the documentation of your product. If for some reason you cannot
+ include such an acknowledgment, I would appreciate that you keep this
+ copyright string in the executable of your product.
+ */
+
+/* ===========================================================================
+ * Function prototypes.
+ */
+typedef enum {
+ need_more, /* block not completed, need more input or more output */
+ block_done, /* block flush performed */
+ finish_started, /* finish started, need only more output at next deflate */
+ finish_done /* finish done, accept no more input or output */
+} block_state;
+
+typedef block_state (*compress_func) OF((deflate_state *s, int flush));
+/* Compression function. Returns the block state after the call. */
+
+local void fill_window OF((deflate_state *s));
+local block_state deflate_stored OF((deflate_state *s, int flush));
+local block_state deflate_fast OF((deflate_state *s, int flush));
+local block_state deflate_slow OF((deflate_state *s, int flush));
+local void lm_init OF((deflate_state *s));
+local void putShortMSB OF((deflate_state *s, uInt b));
+local void flush_pending OF((z_streamp strm));
+local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
+#ifdef ASMV
+ void match_init OF((void)); /* asm code initialization */
+ uInt longest_match OF((deflate_state *s, IPos cur_match));
+#else
+local uInt longest_match OF((deflate_state *s, IPos cur_match));
+#endif
+
+#ifdef DEBUG
+local void check_match OF((deflate_state *s, IPos start, IPos match,
+ int length));
+#endif
+
+/* ===========================================================================
+ * Local data
+ */
+
+#define NIL 0
+/* Tail of hash chains */
+
+#ifndef TOO_FAR
+# define TOO_FAR 4096
+#endif
+/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+/* Values for max_lazy_match, good_match and max_chain_length, depending on
+ * the desired pack level (0..9). The values given below have been tuned to
+ * exclude worst case performance for pathological files. Better values may be
+ * found for specific files.
+ */
+typedef struct config_s {
+ ush good_length; /* reduce lazy search above this match length */
+ ush max_lazy; /* do not perform lazy search above this match length */
+ ush nice_length; /* quit search above this match length */
+ ush max_chain;
+ compress_func func;
+} config;
+
+local const config configuration_table[10] = {
+/* good lazy nice chain */
+/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
+/* 1 */ {4, 4, 8, 4, deflate_fast}, /* maximum speed, no lazy matches */
+/* 2 */ {4, 5, 16, 8, deflate_fast},
+/* 3 */ {4, 6, 32, 32, deflate_fast},
+
+/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */
+/* 5 */ {8, 16, 32, 32, deflate_slow},
+/* 6 */ {8, 16, 128, 128, deflate_slow},
+/* 7 */ {8, 32, 128, 256, deflate_slow},
+/* 8 */ {32, 128, 258, 1024, deflate_slow},
+/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */
+
+/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
+ * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
+ * meaning.
+ */
+
+#define EQUAL 0
+/* result of memcmp for equal strings */
+
+struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
+
+/* ===========================================================================
+ * Update a hash value with the given input byte
+ * IN assertion: all calls to to UPDATE_HASH are made with consecutive
+ * input characters, so that a running hash key can be computed from the
+ * previous key instead of complete recalculation each time.
+ */
+#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
+
+
+/* ===========================================================================
+ * Insert string str in the dictionary and set match_head to the previous head
+ * of the hash chain (the most recent string with same hash key). Return
+ * the previous length of the hash chain.
+ * If this file is compiled with -DFASTEST, the compression level is forced
+ * to 1, and no hash chains are maintained.
+ * IN assertion: all calls to to INSERT_STRING are made with consecutive
+ * input characters and the first MIN_MATCH bytes of str are valid
+ * (except for the last MIN_MATCH-1 bytes of the input file).
+ */
+#ifdef FASTEST
+#define INSERT_STRING(s, str, match_head) \
+ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+ match_head = s->head[s->ins_h], \
+ s->head[s->ins_h] = (Pos)(str))
+#else
+#define INSERT_STRING(s, str, match_head) \
+ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+ s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
+ s->head[s->ins_h] = (Pos)(str))
+#endif
+
+/* ===========================================================================
+ * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
+ * prev[] will be initialized on the fly.
+ */
+#define CLEAR_HASH(s) \
+ s->head[s->hash_size-1] = NIL; \
+ zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+
+/* ========================================================================= */
+int ZEXPORT deflateInit_(strm, level, version, stream_size)
+ z_streamp strm;
+ int level;
+ const char *version;
+ int stream_size;
+{
+ return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
+ Z_DEFAULT_STRATEGY, version, stream_size);
+ /* To do: ignore strm->next_in if we use it as window */
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
+ version, stream_size)
+ z_streamp strm;
+ int level;
+ int method;
+ int windowBits;
+ int memLevel;
+ int strategy;
+ const char *version;
+ int stream_size;
+{
+ deflate_state *s;
+ int noheader = 0;
+ static const char* my_version = ZLIB_VERSION;
+
+ ushf *overlay;
+ /* We overlay pending_buf and d_buf+l_buf. This works since the average
+ * output size for (length,distance) codes is <= 24 bits.
+ */
+
+ if (version == Z_NULL || version[0] != my_version[0] ||
+ stream_size != sizeof(z_stream)) {
+ return Z_VERSION_ERROR;
+ }
+ if (strm == Z_NULL) return Z_STREAM_ERROR;
+
+ strm->msg = Z_NULL;
+ if (strm->zalloc == Z_NULL) {
+ strm->zalloc = zcalloc;
+ strm->opaque = (voidpf)0;
+ }
+ if (strm->zfree == Z_NULL) strm->zfree = zcfree;
+
+ if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#ifdef FASTEST
+ level = 1;
+#endif
+
+ if (windowBits < 0) { /* undocumented feature: suppress zlib header */
+ noheader = 1;
+ windowBits = -windowBits;
+ }
+ if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
+ windowBits < 9 || windowBits > 15 || level < 0 || level > 9 ||
+ strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
+ return Z_STREAM_ERROR;
+ }
+ s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
+ if (s == Z_NULL) return Z_MEM_ERROR;
+ strm->state = (struct internal_state FAR *)s;
+ s->strm = strm;
+
+ s->noheader = noheader;
+ s->w_bits = windowBits;
+ s->w_size = 1 << s->w_bits;
+ s->w_mask = s->w_size - 1;
+
+ s->hash_bits = memLevel + 7;
+ s->hash_size = 1 << s->hash_bits;
+ s->hash_mask = s->hash_size - 1;
+ s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
+
+ s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
+ s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos));
+ s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos));
+
+ s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
+
+ overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
+ s->pending_buf = (uchf *) overlay;
+ s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
+
+ if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
+ s->pending_buf == Z_NULL) {
+ strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
+ deflateEnd (strm);
+ return Z_MEM_ERROR;
+ }
+ s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
+ s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
+
+ s->level = level;
+ s->strategy = strategy;
+ s->method = (Byte)method;
+
+ return deflateReset(strm);
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
+ z_streamp strm;
+ const Bytef *dictionary;
+ uInt dictLength;
+{
+ deflate_state *s;
+ uInt length = dictLength;
+ uInt n;
+ IPos hash_head = 0;
+
+ if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
+ strm->state->status != INIT_STATE) return Z_STREAM_ERROR;
+
+ s = strm->state;
+ strm->adler = adler32(strm->adler, dictionary, dictLength);
+
+ if (length < MIN_MATCH) return Z_OK;
+ if (length > MAX_DIST(s)) {
+ length = MAX_DIST(s);
+#ifndef USE_DICT_HEAD
+ dictionary += dictLength - length; /* use the tail of the dictionary */
+#endif
+ }
+ zmemcpy(s->window, dictionary, length);
+ s->strstart = length;
+ s->block_start = (long)length;
+
+ /* Insert all strings in the hash table (except for the last two bytes).
+ * s->lookahead stays null, so s->ins_h will be recomputed at the next
+ * call of fill_window.
+ */
+ s->ins_h = s->window[0];
+ UPDATE_HASH(s, s->ins_h, s->window[1]);
+ for (n = 0; n <= length - MIN_MATCH; n++) {
+ INSERT_STRING(s, n, hash_head);
+ }
+ if (hash_head) hash_head = 0; /* to make compiler happy */
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateReset (strm)
+ z_streamp strm;
+{
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL ||
+ strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR;
+
+ strm->total_in = strm->total_out = 0;
+ strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
+ strm->data_type = Z_UNKNOWN;
+
+ s = (deflate_state *)strm->state;
+ s->pending = 0;
+ s->pending_out = s->pending_buf;
+
+ if (s->noheader < 0) {
+ s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
+ }
+ s->status = s->noheader ? BUSY_STATE : INIT_STATE;
+ strm->adler = 1;
+ s->last_flush = Z_NO_FLUSH;
+
+ _tr_init(s);
+ lm_init(s);
+
+ return Z_OK;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateParams(strm, level, strategy)
+ z_streamp strm;
+ int level;
+ int strategy;
+{
+ deflate_state *s;
+ compress_func func;
+ int err = Z_OK;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ s = strm->state;
+
+ if (level == Z_DEFAULT_COMPRESSION) {
+ level = 6;
+ }
+ if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
+ return Z_STREAM_ERROR;
+ }
+ func = configuration_table[s->level].func;
+
+ if (func != configuration_table[level].func && strm->total_in != 0) {
+ /* Flush the last buffer: */
+ err = deflate(strm, Z_PARTIAL_FLUSH);
+ }
+ if (s->level != level) {
+ s->level = level;
+ s->max_lazy_match = configuration_table[level].max_lazy;
+ s->good_match = configuration_table[level].good_length;
+ s->nice_match = configuration_table[level].nice_length;
+ s->max_chain_length = configuration_table[level].max_chain;
+ }
+ s->strategy = strategy;
+ return err;
+}
+
+/* =========================================================================
+ * Put a short in the pending buffer. The 16-bit value is put in MSB order.
+ * IN assertion: the stream state is correct and there is enough room in
+ * pending_buf.
+ */
+local void putShortMSB (s, b)
+ deflate_state *s;
+ uInt b;
+{
+ put_byte(s, (Byte)(b >> 8));
+ put_byte(s, (Byte)(b & 0xff));
+}
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->next_out buffer and copying into it.
+ * (See also read_buf()).
+ */
+local void flush_pending(strm)
+ z_streamp strm;
+{
+ unsigned len = strm->state->pending;
+
+ if (len > strm->avail_out) len = strm->avail_out;
+ if (len == 0) return;
+
+ zmemcpy(strm->next_out, strm->state->pending_out, len);
+ strm->next_out += len;
+ strm->state->pending_out += len;
+ strm->total_out += len;
+ strm->avail_out -= len;
+ strm->state->pending -= len;
+ if (strm->state->pending == 0) {
+ strm->state->pending_out = strm->state->pending_buf;
+ }
+}
+
+/* ========================================================================= */
+int ZEXPORT deflate (strm, flush)
+ z_streamp strm;
+ int flush;
+{
+ int old_flush; /* value of flush param for previous deflate call */
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL ||
+ flush > Z_FINISH || flush < 0) {
+ return Z_STREAM_ERROR;
+ }
+ s = strm->state;
+
+ if (strm->next_out == Z_NULL ||
+ (strm->next_in == Z_NULL && strm->avail_in != 0) ||
+ (s->status == FINISH_STATE && flush != Z_FINISH)) {
+ ERR_RETURN(strm, Z_STREAM_ERROR);
+ }
+ if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
+
+ s->strm = strm; /* just in case */
+ old_flush = s->last_flush;
+ s->last_flush = flush;
+
+ /* Write the zlib header */
+ if (s->status == INIT_STATE) {
+
+ uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
+ uInt level_flags = (s->level-1) >> 1;
+
+ if (level_flags > 3) level_flags = 3;
+ header |= (level_flags << 6);
+ if (s->strstart != 0) header |= PRESET_DICT;
+ header += 31 - (header % 31);
+
+ s->status = BUSY_STATE;
+ putShortMSB(s, header);
+
+ /* Save the adler32 of the preset dictionary: */
+ if (s->strstart != 0) {
+ putShortMSB(s, (uInt)(strm->adler >> 16));
+ putShortMSB(s, (uInt)(strm->adler & 0xffff));
+ }
+ strm->adler = 1L;
+ }
+
+ /* Flush as much pending output as possible */
+ if (s->pending != 0) {
+ flush_pending(strm);
+ if (strm->avail_out == 0) {
+ /* Since avail_out is 0, deflate will be called again with
+ * more output space, but possibly with both pending and
+ * avail_in equal to zero. There won't be anything to do,
+ * but this is not an error situation so make sure we
+ * return OK instead of BUF_ERROR at next call of deflate:
+ */
+ s->last_flush = -1;
+ return Z_OK;
+ }
+
+ /* Make sure there is something to do and avoid duplicate consecutive
+ * flushes. For repeated and useless calls with Z_FINISH, we keep
+ * returning Z_STREAM_END instead of Z_BUFF_ERROR.
+ */
+ } else if (strm->avail_in == 0 && flush <= old_flush &&
+ flush != Z_FINISH) {
+ ERR_RETURN(strm, Z_BUF_ERROR);
+ }
+
+ /* User must not provide more input after the first FINISH: */
+ if (s->status == FINISH_STATE && strm->avail_in != 0) {
+ ERR_RETURN(strm, Z_BUF_ERROR);
+ }
+
+ /* Start a new block or continue the current one.
+ */
+ if (strm->avail_in != 0 || s->lookahead != 0 ||
+ (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
+ block_state bstate;
+
+ bstate = (*(configuration_table[s->level].func))(s, flush);
+
+ if (bstate == finish_started || bstate == finish_done) {
+ s->status = FINISH_STATE;
+ }
+ if (bstate == need_more || bstate == finish_started) {
+ if (strm->avail_out == 0) {
+ s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
+ }
+ return Z_OK;
+ /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
+ * of deflate should use the same flush parameter to make sure
+ * that the flush is complete. So we don't have to output an
+ * empty block here, this will be done at next call. This also
+ * ensures that for a very small output buffer, we emit at most
+ * one empty block.
+ */
+ }
+ if (bstate == block_done) {
+ if (flush == Z_PARTIAL_FLUSH) {
+ _tr_align(s);
+ } else { /* FULL_FLUSH or SYNC_FLUSH */
+ _tr_stored_block(s, (char*)0, 0L, 0);
+ /* For a full flush, this empty block will be recognized
+ * as a special marker by inflate_sync().
+ */
+ if (flush == Z_FULL_FLUSH) {
+ CLEAR_HASH(s); /* forget history */
+ }
+ }
+ flush_pending(strm);
+ if (strm->avail_out == 0) {
+ s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
+ return Z_OK;
+ }
+ }
+ }
+ Assert(strm->avail_out > 0, "bug2");
+
+ if (flush != Z_FINISH) return Z_OK;
+ if (s->noheader) return Z_STREAM_END;
+
+ /* Write the zlib trailer (adler32) */
+ putShortMSB(s, (uInt)(strm->adler >> 16));
+ putShortMSB(s, (uInt)(strm->adler & 0xffff));
+ flush_pending(strm);
+ /* If avail_out is zero, the application will call deflate again
+ * to flush the rest.
+ */
+ s->noheader = -1; /* write the trailer only once! */
+ return s->pending != 0 ? Z_OK : Z_STREAM_END;
+}
+
+/* ========================================================================= */
+int ZEXPORT deflateEnd (strm)
+ z_streamp strm;
+{
+ int status;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+
+ status = strm->state->status;
+ if (status != INIT_STATE && status != BUSY_STATE &&
+ status != FINISH_STATE) {
+ return Z_STREAM_ERROR;
+ }
+
+ /* Deallocate in reverse order of allocations: */
+ TRY_FREE(strm, strm->state->pending_buf);
+ TRY_FREE(strm, strm->state->head);
+ TRY_FREE(strm, strm->state->prev);
+ TRY_FREE(strm, strm->state->window);
+
+ ZFREE(strm, strm->state);
+ strm->state = Z_NULL;
+
+ return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
+}
+
+/* =========================================================================
+ * Copy the source state to the destination state.
+ * To simplify the source, this is not supported for 16-bit MSDOS (which
+ * doesn't have enough memory anyway to duplicate compression states).
+ */
+int ZEXPORT deflateCopy (dest, source)
+ z_streamp dest;
+ z_streamp source;
+{
+#ifdef MAXSEG_64K
+ return Z_STREAM_ERROR;
+#else
+ deflate_state *ds;
+ deflate_state *ss;
+ ushf *overlay;
+
+
+ if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
+ return Z_STREAM_ERROR;
+ }
+
+ ss = source->state;
+
+ *dest = *source;
+
+ ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
+ if (ds == Z_NULL) return Z_MEM_ERROR;
+ dest->state = (struct internal_state FAR *) ds;
+ *ds = *ss;
+ ds->strm = dest;
+
+ ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
+ ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos));
+ ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos));
+ overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
+ ds->pending_buf = (uchf *) overlay;
+
+ if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
+ ds->pending_buf == Z_NULL) {
+ deflateEnd (dest);
+ return Z_MEM_ERROR;
+ }
+ /* following zmemcpy do not work for 16-bit MSDOS */
+ zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
+ zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
+ zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
+ zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
+
+ ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
+ ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
+ ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
+
+ ds->l_desc.dyn_tree = ds->dyn_ltree;
+ ds->d_desc.dyn_tree = ds->dyn_dtree;
+ ds->bl_desc.dyn_tree = ds->bl_tree;
+
+ return Z_OK;
+#endif
+}
+
+/* ===========================================================================
+ * Read a new buffer from the current input stream, update the adler32
+ * and total number of bytes read. All deflate() input goes through
+ * this function so some applications may wish to modify it to avoid
+ * allocating a large strm->next_in buffer and copying from it.
+ * (See also flush_pending()).
+ */
+local int read_buf(strm, buf, size)
+ z_streamp strm;
+ Bytef *buf;
+ unsigned size;
+{
+ unsigned len = strm->avail_in;
+
+ if (len > size) len = size;
+ if (len == 0) return 0;
+
+ strm->avail_in -= len;
+
+ if (!strm->state->noheader) {
+ strm->adler = adler32(strm->adler, strm->next_in, len);
+ }
+ zmemcpy(buf, strm->next_in, len);
+ strm->next_in += len;
+ strm->total_in += len;
+
+ return (int)len;
+}
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new zlib stream
+ */
+local void lm_init (s)
+ deflate_state *s;
+{
+ s->window_size = (ulg)2L*s->w_size;
+
+ CLEAR_HASH(s);
+
+ /* Set the default configuration parameters:
+ */
+ s->max_lazy_match = configuration_table[s->level].max_lazy;
+ s->good_match = configuration_table[s->level].good_length;
+ s->nice_match = configuration_table[s->level].nice_length;
+ s->max_chain_length = configuration_table[s->level].max_chain;
+
+ s->strstart = 0;
+ s->block_start = 0L;
+ s->lookahead = 0;
+ s->match_length = s->prev_length = MIN_MATCH-1;
+ s->match_available = 0;
+ s->ins_h = 0;
+#ifdef ASMV
+ match_init(); /* initialize the asm code */
+#endif
+}
+
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ * OUT assertion: the match length is not greater than s->lookahead.
+ */
+#ifndef ASMV
+/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
+ * match.S. The code will be functionally equivalent.
+ */
+#ifndef FASTEST
+local uInt longest_match(s, cur_match)
+ deflate_state *s;
+ IPos cur_match; /* current match */
+{
+ unsigned chain_length = s->max_chain_length;/* max hash chain length */
+ register Bytef *scan = s->window + s->strstart; /* current string */
+ register Bytef *match; /* matched string */
+ register int len; /* length of current match */
+ int best_len = s->prev_length; /* best match length so far */
+ int nice_match = s->nice_match; /* stop if match long enough */
+ IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+ s->strstart - (IPos)MAX_DIST(s) : NIL;
+ /* Stop when cur_match becomes <= limit. To simplify the code,
+ * we prevent matches with the string of window index 0.
+ */
+ Posf *prev = s->prev;
+ uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+ /* Compare two bytes at a time. Note: this is not always beneficial.
+ * Try with and without -DUNALIGNED_OK to check.
+ */
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
+ register ush scan_start = *(ushf*)scan;
+ register ush scan_end = *(ushf*)(scan+best_len-1);
+#else
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+ register Byte scan_end1 = scan[best_len-1];
+ register Byte scan_end = scan[best_len];
+#endif
+
+ /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+ * It is easy to get rid of this optimization if necessary.
+ */
+ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+ /* Do not waste too much time if we already have a good match: */
+ if (s->prev_length >= s->good_match) {
+ chain_length >>= 2;
+ }
+ /* Do not look for matches beyond the end of the input. This is necessary
+ * to make deflate deterministic.
+ */
+ if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+ Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+ do {
+ Assert(cur_match < s->strstart, "no future");
+ match = s->window + cur_match;
+
+ /* Skip to next match if the match length cannot increase
+ * or if the match length is less than 2:
+ */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+ /* This code assumes sizeof(unsigned short) == 2. Do not use
+ * UNALIGNED_OK if your compiler uses a different size.
+ */
+ if (*(ushf*)(match+best_len-1) != scan_end ||
+ *(ushf*)match != scan_start) continue;
+
+ /* It is not necessary to compare scan[2] and match[2] since they are
+ * always equal when the other bytes match, given that the hash keys
+ * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+ * strstart+3, +5, ... up to strstart+257. We check for insufficient
+ * lookahead only every 4th comparison; the 128th check will be made
+ * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+ * necessary to put more guard bytes at the end of the window, or
+ * to check more often for insufficient lookahead.
+ */
+ Assert(scan[2] == match[2], "scan[2]?");
+ scan++, match++;
+ do {
+ } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+ scan < strend);
+ /* The funny "do {}" generates better code on most compilers */
+
+ /* Here, scan <= window+strstart+257 */
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+ if (*scan == *match) scan++;
+
+ len = (MAX_MATCH - 1) - (int)(strend-scan);
+ scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+ if (match[best_len] != scan_end ||
+ match[best_len-1] != scan_end1 ||
+ *match != *scan ||
+ *++match != scan[1]) continue;
+
+ /* The check at best_len-1 can be removed because it will be made
+ * again later. (This heuristic is not always a win.)
+ * It is not necessary to compare scan[2] and match[2] since they
+ * are always equal when the other bytes match, given that
+ * the hash keys are equal and that HASH_BITS >= 8.
+ */
+ scan += 2, match++;
+ Assert(*scan == *match, "match[2]?");
+
+ /* We check for insufficient lookahead only every 8th comparison;
+ * the 256th check will be made at strstart+258.
+ */
+ do {
+ } while (*++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ scan < strend);
+
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+ len = MAX_MATCH - (int)(strend - scan);
+ scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+ if (len > best_len) {
+ s->match_start = cur_match;
+ best_len = len;
+ if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+ scan_end = *(ushf*)(scan+best_len-1);
+#else
+ scan_end1 = scan[best_len-1];
+ scan_end = scan[best_len];
+#endif
+ }
+ } while ((cur_match = prev[cur_match & wmask]) > limit
+ && --chain_length != 0);
+
+ if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+ return s->lookahead;
+}
+
+#else /* FASTEST */
+/* ---------------------------------------------------------------------------
+ * Optimized version for level == 1 only
+ */
+local uInt longest_match(s, cur_match)
+ deflate_state *s;
+ IPos cur_match; /* current match */
+{
+ register Bytef *scan = s->window + s->strstart; /* current string */
+ register Bytef *match; /* matched string */
+ register int len; /* length of current match */
+ register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+
+ /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+ * It is easy to get rid of this optimization if necessary.
+ */
+ Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+ Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+ Assert(cur_match < s->strstart, "no future");
+
+ match = s->window + cur_match;
+
+ /* Return failure if the match length is less than 2:
+ */
+ if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
+
+ /* The check at best_len-1 can be removed because it will be made
+ * again later. (This heuristic is not always a win.)
+ * It is not necessary to compare scan[2] and match[2] since they
+ * are always equal when the other bytes match, given that
+ * the hash keys are equal and that HASH_BITS >= 8.
+ */
+ scan += 2, match += 2;
+ Assert(*scan == *match, "match[2]?");
+
+ /* We check for insufficient lookahead only every 8th comparison;
+ * the 256th check will be made at strstart+258.
+ */
+ do {
+ } while (*++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ *++scan == *++match && *++scan == *++match &&
+ scan < strend);
+
+ Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+ len = MAX_MATCH - (int)(strend - scan);
+
+ if (len < MIN_MATCH) return MIN_MATCH - 1;
+
+ s->match_start = cur_match;
+ return len <= s->lookahead ? len : s->lookahead;
+}
+#endif /* FASTEST */
+#endif /* ASMV */
+
+#ifdef DEBUG
+/* ===========================================================================
+ * Check that the match at match_start is indeed a match.
+ */
+local void check_match(s, start, match, length)
+ deflate_state *s;
+ IPos start, match;
+ int length;
+{
+ /* check that the match is indeed a match */
+ if (zmemcmp(s->window + match,
+ s->window + start, length) != EQUAL) {
+ fprintf(stderr, " start %u, match %u, length %d\n",
+ start, match, length);
+ do {
+ fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
+ } while (--length != 0);
+ z_error("invalid match");
+ }
+ if (z_verbose > 1) {
+ fprintf(stderr,"\\[%d,%d]", start-match, length);
+ do { putc(s->window[start++], stderr); } while (--length != 0);
+ }
+}
+#else
+# define check_match(s, start, match, length)
+#endif
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ * At least one byte has been read, or avail_in == 0; reads are
+ * performed for at least two bytes (required for the zip translate_eol
+ * option -- not supported here).
+ */
+local void fill_window(s)
+ deflate_state *s;
+{
+ register unsigned n, m;
+ register Posf *p;
+ unsigned more; /* Amount of free space at the end of the window. */
+ uInt wsize = s->w_size;
+
+ do {
+ more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
+
+ /* Deal with !@#$% 64K limit: */
+ if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
+ more = wsize;
+
+ } else if (more == (unsigned)(-1)) {
+ /* Very unlikely, but possible on 16 bit machine if strstart == 0
+ * and lookahead == 1 (input done one byte at time)
+ */
+ more--;
+
+ /* If the window is almost full and there is insufficient lookahead,
+ * move the upper half to the lower one to make room in the upper half.
+ */
+ } else if (s->strstart >= wsize+MAX_DIST(s)) {
+
+ zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
+ s->match_start -= wsize;
+ s->strstart -= wsize; /* we now have strstart >= MAX_DIST */
+ s->block_start -= (long) wsize;
+
+ /* Slide the hash table (could be avoided with 32 bit values
+ at the expense of memory usage). We slide even when level == 0
+ to keep the hash table consistent if we switch back to level > 0
+ later. (Using level 0 permanently is not an optimal usage of
+ zlib, so we don't care about this pathological case.)
+ */
+ n = s->hash_size;
+ p = &s->head[n];
+ do {
+ m = *--p;
+ *p = (Pos)(m >= wsize ? m-wsize : NIL);
+ } while (--n);
+
+ n = wsize;
+#ifndef FASTEST
+ p = &s->prev[n];
+ do {
+ m = *--p;
+ *p = (Pos)(m >= wsize ? m-wsize : NIL);
+ /* If n is not on any hash chain, prev[n] is garbage but
+ * its value will never be used.
+ */
+ } while (--n);
+#endif
+ more += wsize;
+ }
+ if (s->strm->avail_in == 0) return;
+
+ /* If there was no sliding:
+ * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+ * more == window_size - lookahead - strstart
+ * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+ * => more >= window_size - 2*WSIZE + 2
+ * In the BIG_MEM or MMAP case (not yet supported),
+ * window_size == input_size + MIN_LOOKAHEAD &&
+ * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+ * Otherwise, window_size == 2*WSIZE so more >= 2.
+ * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+ */
+ Assert(more >= 2, "more < 2");
+
+ n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
+ s->lookahead += n;
+
+ /* Initialize the hash value now that we have some input: */
+ if (s->lookahead >= MIN_MATCH) {
+ s->ins_h = s->window[s->strstart];
+ UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+ Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+ }
+ /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
+ * but this is not important since only literal bytes will be emitted.
+ */
+
+ } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
+}
+
+/* ===========================================================================
+ * Flush the current block, with given end-of-file flag.
+ * IN assertion: strstart is set to the end of the current match.
+ */
+#define FLUSH_BLOCK_ONLY(s, eof) { \
+ _tr_flush_block(s, (s->block_start >= 0L ? \
+ (charf *)&s->window[(unsigned)s->block_start] : \
+ (charf *)Z_NULL), \
+ (ulg)((long)s->strstart - s->block_start), \
+ (eof)); \
+ s->block_start = s->strstart; \
+ flush_pending(s->strm); \
+ Tracev((stderr,"[FLUSH]")); \
+}
+
+/* Same but force premature exit if necessary. */
+#define FLUSH_BLOCK(s, eof) { \
+ FLUSH_BLOCK_ONLY(s, eof); \
+ if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
+}
+
+/* ===========================================================================
+ * Copy without compression as much as possible from the input stream, return
+ * the current block state.
+ * This function does not insert new strings in the dictionary since
+ * uncompressible data is probably not useful. This function is used
+ * only for the level=0 compression option.
+ * NOTE: this function should be optimized to avoid extra copying from
+ * window to pending_buf.
+ */
+local block_state deflate_stored(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
+ * to pending_buf_size, and each stored block has a 5 byte header:
+ */
+ ulg max_block_size = 0xffff;
+ ulg max_start;
+
+ if (max_block_size > s->pending_buf_size - 5) {
+ max_block_size = s->pending_buf_size - 5;
+ }
+
+ /* Copy as much as possible from input to output: */
+ for (;;) {
+ /* Fill the window as much as possible: */
+ if (s->lookahead <= 1) {
+
+ Assert(s->strstart < s->w_size+MAX_DIST(s) ||
+ s->block_start >= (long)s->w_size, "slide too late");
+
+ fill_window(s);
+ if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
+
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+ Assert(s->block_start >= 0L, "block gone");
+
+ s->strstart += s->lookahead;
+ s->lookahead = 0;
+
+ /* Emit a stored block if pending_buf will be full: */
+ max_start = s->block_start + max_block_size;
+ if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
+ /* strstart == 0 is possible when wraparound on 16-bit machine */
+ s->lookahead = (uInt)(s->strstart - max_start);
+ s->strstart = (uInt)max_start;
+ FLUSH_BLOCK(s, 0);
+ }
+ /* Flush if we may have to slide, otherwise block_start may become
+ * negative and the data will be gone:
+ */
+ if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
+ FLUSH_BLOCK(s, 0);
+ }
+ }
+ FLUSH_BLOCK(s, flush == Z_FINISH);
+ return flush == Z_FINISH ? finish_done : block_done;
+}
+
+/* ===========================================================================
+ * Compress as much as possible from the input stream, return the current
+ * block state.
+ * This function does not perform lazy evaluation of matches and inserts
+ * new strings in the dictionary only for unmatched strings or for short
+ * matches. It is used only for the fast compression options.
+ */
+local block_state deflate_fast(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ IPos hash_head = NIL; /* head of the hash chain */
+ int bflush; /* set if current block must be flushed */
+
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (s->lookahead < MIN_LOOKAHEAD) {
+ fill_window(s);
+ if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ if (s->lookahead >= MIN_MATCH) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+
+ /* Find the longest match, discarding those <= prev_length.
+ * At this point we have always match_length < MIN_MATCH
+ */
+ if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+ if (s->strategy != Z_HUFFMAN_ONLY) {
+ s->match_length = longest_match (s, hash_head);
+ }
+ /* longest_match() sets match_start */
+ }
+ if (s->match_length >= MIN_MATCH) {
+ check_match(s, s->strstart, s->match_start, s->match_length);
+
+ _tr_tally_dist(s, s->strstart - s->match_start,
+ s->match_length - MIN_MATCH, bflush);
+
+ s->lookahead -= s->match_length;
+
+ /* Insert new strings in the hash table only if the match length
+ * is not too large. This saves time but degrades compression.
+ */
+#ifndef FASTEST
+ if (s->match_length <= s->max_insert_length &&
+ s->lookahead >= MIN_MATCH) {
+ s->match_length--; /* string at strstart already in hash table */
+ do {
+ s->strstart++;
+ INSERT_STRING(s, s->strstart, hash_head);
+ /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+ * always MIN_MATCH bytes ahead.
+ */
+ } while (--s->match_length != 0);
+ s->strstart++;
+ } else
+#endif
+ {
+ s->strstart += s->match_length;
+ s->match_length = 0;
+ s->ins_h = s->window[s->strstart];
+ UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+ Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+ /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
+ * matter since it will be recomputed at next deflate call.
+ */
+ }
+ } else {
+ /* No match, output a literal byte */
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ }
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ FLUSH_BLOCK(s, flush == Z_FINISH);
+ return flush == Z_FINISH ? finish_done : block_done;
+}
+
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+local block_state deflate_slow(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ IPos hash_head = NIL; /* head of hash chain */
+ int bflush; /* set if current block must be flushed */
+
+ /* Process the input block. */
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the next match, plus MIN_MATCH bytes to insert the
+ * string following the next match.
+ */
+ if (s->lookahead < MIN_LOOKAHEAD) {
+ fill_window(s);
+ if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* Insert the string window[strstart .. strstart+2] in the
+ * dictionary, and set hash_head to the head of the hash chain:
+ */
+ if (s->lookahead >= MIN_MATCH) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+
+ /* Find the longest match, discarding those <= prev_length.
+ */
+ s->prev_length = s->match_length, s->prev_match = s->match_start;
+ s->match_length = MIN_MATCH-1;
+
+ if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
+ s->strstart - hash_head <= MAX_DIST(s)) {
+ /* To simplify the code, we prevent matches with the string
+ * of window index 0 (in particular we have to avoid a match
+ * of the string with itself at the start of the input file).
+ */
+ if (s->strategy != Z_HUFFMAN_ONLY) {
+ s->match_length = longest_match (s, hash_head);
+ }
+ /* longest_match() sets match_start */
+
+ if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
+ (s->match_length == MIN_MATCH &&
+ s->strstart - s->match_start > TOO_FAR))) {
+
+ /* If prev_match is also MIN_MATCH, match_start is garbage
+ * but we will ignore the current match anyway.
+ */
+ s->match_length = MIN_MATCH-1;
+ }
+ }
+ /* If there was a match at the previous step and the current
+ * match is not better, output the previous match:
+ */
+ if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
+ uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
+ /* Do not insert strings in hash table beyond this. */
+
+ check_match(s, s->strstart-1, s->prev_match, s->prev_length);
+
+ _tr_tally_dist(s, s->strstart -1 - s->prev_match,
+ s->prev_length - MIN_MATCH, bflush);
+
+ /* Insert in hash table all strings up to the end of the match.
+ * strstart-1 and strstart are already inserted. If there is not
+ * enough lookahead, the last two strings are not inserted in
+ * the hash table.
+ */
+ s->lookahead -= s->prev_length-1;
+ s->prev_length -= 2;
+ do {
+ if (++s->strstart <= max_insert) {
+ INSERT_STRING(s, s->strstart, hash_head);
+ }
+ } while (--s->prev_length != 0);
+ s->match_available = 0;
+ s->match_length = MIN_MATCH-1;
+ s->strstart++;
+
+ if (bflush) FLUSH_BLOCK(s, 0);
+
+ } else if (s->match_available) {
+ /* If there was no match at the previous position, output a
+ * single literal. If there was a match but the current match
+ * is longer, truncate the previous match to a single literal.
+ */
+ Tracevv((stderr,"%c", s->window[s->strstart-1]));
+ _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+ if (bflush) {
+ FLUSH_BLOCK_ONLY(s, 0);
+ }
+ s->strstart++;
+ s->lookahead--;
+ if (s->strm->avail_out == 0) return need_more;
+ } else {
+ /* There is no previous match to compare with, wait for
+ * the next step to decide.
+ */
+ s->match_available = 1;
+ s->strstart++;
+ s->lookahead--;
+ }
+ }
+ Assert (flush != Z_NO_FLUSH, "no flush?");
+ if (s->match_available) {
+ Tracevv((stderr,"%c", s->window[s->strstart-1]));
+ _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+ s->match_available = 0;
+ }
+ FLUSH_BLOCK(s, flush == Z_FINISH);
+ return flush == Z_FINISH ? finish_done : block_done;
+}
--- /dev/null
+/* deflate.h -- internal compression state
+ * Copyright (C) 1995-2002 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef _DEFLATE_H
+#define _DEFLATE_H
+
+#include "zutil.h"
+
+/* ===========================================================================
+ * Internal compression state.
+ */
+
+#define LENGTH_CODES 29
+/* number of length codes, not counting the special END_BLOCK code */
+
+#define LITERALS 256
+/* number of literal bytes 0..255 */
+
+#define L_CODES (LITERALS+1+LENGTH_CODES)
+/* number of Literal or Length codes, including the END_BLOCK code */
+
+#define D_CODES 30
+/* number of distance codes */
+
+#define BL_CODES 19
+/* number of codes used to transfer the bit lengths */
+
+#define HEAP_SIZE (2*L_CODES+1)
+/* maximum heap size */
+
+#define MAX_BITS 15
+/* All codes must not exceed MAX_BITS bits */
+
+#define INIT_STATE 42
+#define BUSY_STATE 113
+#define FINISH_STATE 666
+/* Stream status */
+
+
+/* Data structure describing a single value and its code string. */
+typedef struct ct_data_s {
+ union {
+ ush freq; /* frequency count */
+ ush code; /* bit string */
+ } fc;
+ union {
+ ush dad; /* father node in Huffman tree */
+ ush len; /* length of bit string */
+ } dl;
+} FAR ct_data;
+
+#define Freq fc.freq
+#define Code fc.code
+#define Dad dl.dad
+#define Len dl.len
+
+typedef struct static_tree_desc_s static_tree_desc;
+
+typedef struct tree_desc_s {
+ ct_data *dyn_tree; /* the dynamic tree */
+ int max_code; /* largest code with non zero frequency */
+ static_tree_desc *stat_desc; /* the corresponding static tree */
+} FAR tree_desc;
+
+typedef ush Pos;
+typedef Pos FAR Posf;
+typedef unsigned IPos;
+
+/* A Pos is an index in the character window. We use short instead of int to
+ * save space in the various tables. IPos is used only for parameter passing.
+ */
+
+typedef struct internal_state {
+ z_streamp strm; /* pointer back to this zlib stream */
+ int status; /* as the name implies */
+ Bytef *pending_buf; /* output still pending */
+ ulg pending_buf_size; /* size of pending_buf */
+ Bytef *pending_out; /* next pending byte to output to the stream */
+ int pending; /* nb of bytes in the pending buffer */
+ int noheader; /* suppress zlib header and adler32 */
+ Byte data_type; /* UNKNOWN, BINARY or ASCII */
+ Byte method; /* STORED (for zip only) or DEFLATED */
+ int last_flush; /* value of flush param for previous deflate call */
+
+ /* used by deflate.c: */
+
+ uInt w_size; /* LZ77 window size (32K by default) */
+ uInt w_bits; /* log2(w_size) (8..16) */
+ uInt w_mask; /* w_size - 1 */
+
+ Bytef *window;
+ /* Sliding window. Input bytes are read into the second half of the window,
+ * and move to the first half later to keep a dictionary of at least wSize
+ * bytes. With this organization, matches are limited to a distance of
+ * wSize-MAX_MATCH bytes, but this ensures that IO is always
+ * performed with a length multiple of the block size. Also, it limits
+ * the window size to 64K, which is quite useful on MSDOS.
+ * To do: use the user input buffer as sliding window.
+ */
+
+ ulg window_size;
+ /* Actual size of window: 2*wSize, except when the user input buffer
+ * is directly used as sliding window.
+ */
+
+ Posf *prev;
+ /* Link to older string with same hash index. To limit the size of this
+ * array to 64K, this link is maintained only for the last 32K strings.
+ * An index in this array is thus a window index modulo 32K.
+ */
+
+ Posf *head; /* Heads of the hash chains or NIL. */
+
+ uInt ins_h; /* hash index of string to be inserted */
+ uInt hash_size; /* number of elements in hash table */
+ uInt hash_bits; /* log2(hash_size) */
+ uInt hash_mask; /* hash_size-1 */
+
+ uInt hash_shift;
+ /* Number of bits by which ins_h must be shifted at each input
+ * step. It must be such that after MIN_MATCH steps, the oldest
+ * byte no longer takes part in the hash key, that is:
+ * hash_shift * MIN_MATCH >= hash_bits
+ */
+
+ long block_start;
+ /* Window position at the beginning of the current output block. Gets
+ * negative when the window is moved backwards.
+ */
+
+ uInt match_length; /* length of best match */
+ IPos prev_match; /* previous match */
+ int match_available; /* set if previous match exists */
+ uInt strstart; /* start of string to insert */
+ uInt match_start; /* start of matching string */
+ uInt lookahead; /* number of valid bytes ahead in window */
+
+ uInt prev_length;
+ /* Length of the best match at previous step. Matches not greater than this
+ * are discarded. This is used in the lazy match evaluation.
+ */
+
+ uInt max_chain_length;
+ /* To speed up deflation, hash chains are never searched beyond this
+ * length. A higher limit improves compression ratio but degrades the
+ * speed.
+ */
+
+ uInt max_lazy_match;
+ /* Attempt to find a better match only when the current match is strictly
+ * smaller than this value. This mechanism is used only for compression
+ * levels >= 4.
+ */
+# define max_insert_length max_lazy_match
+ /* Insert new strings in the hash table only if the match length is not
+ * greater than this length. This saves time but degrades compression.
+ * max_insert_length is used only for compression levels <= 3.
+ */
+
+ int level; /* compression level (1..9) */
+ int strategy; /* favor or force Huffman coding*/
+
+ uInt good_match;
+ /* Use a faster search when the previous match is longer than this */
+
+ int nice_match; /* Stop searching when current match exceeds this */
+
+ /* used by trees.c: */
+ /* Didn't use ct_data typedef below to supress compiler warning */
+ struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
+ struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
+ struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
+
+ struct tree_desc_s l_desc; /* desc. for literal tree */
+ struct tree_desc_s d_desc; /* desc. for distance tree */
+ struct tree_desc_s bl_desc; /* desc. for bit length tree */
+
+ ush bl_count[MAX_BITS+1];
+ /* number of codes at each bit length for an optimal tree */
+
+ int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */
+ int heap_len; /* number of elements in the heap */
+ int heap_max; /* element of largest frequency */
+ /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+ * The same heap array is used to build all trees.
+ */
+
+ uch depth[2*L_CODES+1];
+ /* Depth of each subtree used as tie breaker for trees of equal frequency
+ */
+
+ uchf *l_buf; /* buffer for literals or lengths */
+
+ uInt lit_bufsize;
+ /* Size of match buffer for literals/lengths. There are 4 reasons for
+ * limiting lit_bufsize to 64K:
+ * - frequencies can be kept in 16 bit counters
+ * - if compression is not successful for the first block, all input
+ * data is still in the window so we can still emit a stored block even
+ * when input comes from standard input. (This can also be done for
+ * all blocks if lit_bufsize is not greater than 32K.)
+ * - if compression is not successful for a file smaller than 64K, we can
+ * even emit a stored file instead of a stored block (saving 5 bytes).
+ * This is applicable only for zip (not gzip or zlib).
+ * - creating new Huffman trees less frequently may not provide fast
+ * adaptation to changes in the input data statistics. (Take for
+ * example a binary file with poorly compressible code followed by
+ * a highly compressible string table.) Smaller buffer sizes give
+ * fast adaptation but have of course the overhead of transmitting
+ * trees more frequently.
+ * - I can't count above 4
+ */
+
+ uInt last_lit; /* running index in l_buf */
+
+ ushf *d_buf;
+ /* Buffer for distances. To simplify the code, d_buf and l_buf have
+ * the same number of elements. To use different lengths, an extra flag
+ * array would be necessary.
+ */
+
+ ulg opt_len; /* bit length of current block with optimal trees */
+ ulg static_len; /* bit length of current block with static trees */
+ uInt matches; /* number of string matches in current block */
+ int last_eob_len; /* bit length of EOB code for last block */
+
+#ifdef DEBUG
+ ulg compressed_len; /* total bit length of compressed file mod 2^32 */
+ ulg bits_sent; /* bit length of compressed data sent mod 2^32 */
+#endif
+
+ ush bi_buf;
+ /* Output buffer. bits are inserted starting at the bottom (least
+ * significant bits).
+ */
+ int bi_valid;
+ /* Number of valid bits in bi_buf. All bits above the last valid bit
+ * are always zero.
+ */
+
+} FAR deflate_state;
+
+/* Output a byte on the stream.
+ * IN assertion: there is enough room in pending_buf.
+ */
+#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
+
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD)
+/* In order to simplify the code, particularly on 16 bit machines, match
+ * distances are limited to MAX_DIST instead of WSIZE.
+ */
+
+ /* in trees.c */
+void _tr_init OF((deflate_state *s));
+int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
+void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
+ int eof));
+void _tr_align OF((deflate_state *s));
+void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
+ int eof));
+
+#define d_code(dist) \
+ ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+ extern uch _length_code[];
+ extern uch _dist_code[];
+#else
+ extern const uch _length_code[];
+ extern const uch _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+ { uch cc = (c); \
+ s->d_buf[s->last_lit] = 0; \
+ s->l_buf[s->last_lit++] = cc; \
+ s->dyn_ltree[cc].Freq++; \
+ flush = (s->last_lit == s->lit_bufsize-1); \
+ }
+# define _tr_tally_dist(s, distance, length, flush) \
+ { uch len = (length); \
+ ush dist = (distance); \
+ s->d_buf[s->last_lit] = dist; \
+ s->l_buf[s->last_lit++] = len; \
+ dist--; \
+ s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+ s->dyn_dtree[d_code(dist)].Freq++; \
+ flush = (s->last_lit == s->lit_bufsize-1); \
+ }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+ flush = _tr_tally(s, distance, length)
+#endif
+
+#endif
--- /dev/null
+# descrip.mms: MMS description file for building zlib on VMS
+# written by Martin P.J. Zinser <m.zinser@gsi.de>
+
+cc_defs =
+c_deb =
+
+.ifdef __DECC__
+pref = /prefix=all
+.endif
+
+OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\
+ deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\
+ inftrees.obj, infcodes.obj, infutil.obj, inffast.obj
+
+CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF)
+
+all : example.exe minigzip.exe
+ @ write sys$output " Example applications available"
+libz.olb : libz.olb($(OBJS))
+ @ write sys$output " libz available"
+
+example.exe : example.obj libz.olb
+ link example,libz.olb/lib
+
+minigzip.exe : minigzip.obj libz.olb
+ link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
+
+clean :
+ delete *.obj;*,libz.olb;*
+
+
+# Other dependencies.
+adler32.obj : zutil.h zlib.h zconf.h
+compress.obj : zlib.h zconf.h
+crc32.obj : zutil.h zlib.h zconf.h
+deflate.obj : deflate.h zutil.h zlib.h zconf.h
+example.obj : zlib.h zconf.h
+gzio.obj : zutil.h zlib.h zconf.h
+infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inflate.obj : zutil.h zlib.h zconf.h infblock.h
+inftrees.obj : zutil.h zlib.h zconf.h inftrees.h
+infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h
+minigzip.obj : zlib.h zconf.h
+trees.obj : deflate.h zutil.h zlib.h zconf.h
+uncompr.obj : zlib.h zconf.h
+zutil.obj : zutil.h zlib.h zconf.h
--- /dev/null
+/* example.c -- usage example of the zlib compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include <stdio.h>
+#include "zlib.h"
+
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+#else
+ extern void exit OF((int));
+#endif
+
+#if defined(VMS) || defined(RISCOS)
+# define TESTFILE "foo-gz"
+#else
+# define TESTFILE "foo.gz"
+#endif
+
+#define CHECK_ERR(err, msg) { \
+ if (err != Z_OK) { \
+ fprintf(stderr, "%s error: %d\n", msg, err); \
+ exit(1); \
+ } \
+}
+
+const char hello[] = "hello, hello!";
+/* "hello world" would be more standard, but the repeated "hello"
+ * stresses the compression code better, sorry...
+ */
+
+const char dictionary[] = "hello";
+uLong dictId; /* Adler32 value of the dictionary */
+
+void test_compress OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_gzio OF((const char *out, const char *in,
+ Byte *uncompr, int uncomprLen));
+void test_deflate OF((Byte *compr, uLong comprLen));
+void test_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_large_deflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_large_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_flush OF((Byte *compr, uLong *comprLen));
+void test_sync OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_dict_deflate OF((Byte *compr, uLong comprLen));
+void test_dict_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+int main OF((int argc, char *argv[]));
+
+/* ===========================================================================
+ * Test compress() and uncompress()
+ */
+void test_compress(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ uLong len = strlen(hello)+1;
+
+ err = compress(compr, &comprLen, (const Bytef*)hello, len);
+ CHECK_ERR(err, "compress");
+
+ strcpy((char*)uncompr, "garbage");
+
+ err = uncompress(uncompr, &uncomprLen, compr, comprLen);
+ CHECK_ERR(err, "uncompress");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad uncompress\n");
+ exit(1);
+ } else {
+ printf("uncompress(): %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Test read/write of .gz files
+ */
+void test_gzio(out, in, uncompr, uncomprLen)
+ const char *out; /* compressed output file */
+ const char *in; /* compressed input file */
+ Byte *uncompr;
+ int uncomprLen;
+{
+ int err;
+ int len = strlen(hello)+1;
+ gzFile file;
+ z_off_t pos;
+
+ file = gzopen(out, "wb");
+ if (file == NULL) {
+ fprintf(stderr, "gzopen error\n");
+ exit(1);
+ }
+ gzputc(file, 'h');
+ if (gzputs(file, "ello") != 4) {
+ fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (gzprintf(file, ", %s!", "hello") != 8) {
+ fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
+ gzclose(file);
+
+ file = gzopen(in, "rb");
+ if (file == NULL) {
+ fprintf(stderr, "gzopen error\n");
+ }
+ strcpy((char*)uncompr, "garbage");
+
+ uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen);
+ if (uncomprLen != len) {
+ fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
+ exit(1);
+ } else {
+ printf("gzread(): %s\n", (char *)uncompr);
+ }
+
+ pos = gzseek(file, -8L, SEEK_CUR);
+ if (pos != 6 || gztell(file) != pos) {
+ fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
+ (long)pos, (long)gztell(file));
+ exit(1);
+ }
+
+ if (gzgetc(file) != ' ') {
+ fprintf(stderr, "gzgetc error\n");
+ exit(1);
+ }
+
+ gzgets(file, (char*)uncompr, uncomprLen);
+ uncomprLen = strlen((char*)uncompr);
+ if (uncomprLen != 6) { /* "hello!" */
+ fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (strcmp((char*)uncompr, hello+7)) {
+ fprintf(stderr, "bad gzgets after gzseek\n");
+ exit(1);
+ } else {
+ printf("gzgets() after gzseek: %s\n", (char *)uncompr);
+ }
+
+ gzclose(file);
+}
+
+/* ===========================================================================
+ * Test deflate() with small buffers
+ */
+void test_deflate(compr, comprLen)
+ Byte *compr;
+ uLong comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+ int len = strlen(hello)+1;
+
+ c_stream.zalloc = (alloc_func)0;
+ c_stream.zfree = (free_func)0;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_in = (Bytef*)hello;
+ c_stream.next_out = compr;
+
+ while (c_stream.total_in != (uLong)len && c_stream.total_out < comprLen) {
+ c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+ }
+ /* Finish the stream, still forcing small buffers: */
+ for (;;) {
+ c_stream.avail_out = 1;
+ err = deflate(&c_stream, Z_FINISH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "deflate");
+ }
+
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with small buffers
+ */
+void test_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = (alloc_func)0;
+ d_stream.zfree = (free_func)0;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = 0;
+ d_stream.next_out = uncompr;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
+ d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "inflate");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad inflate\n");
+ exit(1);
+ } else {
+ printf("inflate(): %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Test deflate() with large buffers and dynamic change of compression level
+ */
+void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+
+ c_stream.zalloc = (alloc_func)0;
+ c_stream.zfree = (free_func)0;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_BEST_SPEED);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_out = compr;
+ c_stream.avail_out = (uInt)comprLen;
+
+ /* At this point, uncompr is still mostly zeroes, so it should compress
+ * very well:
+ */
+ c_stream.next_in = uncompr;
+ c_stream.avail_in = (uInt)uncomprLen;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+ if (c_stream.avail_in != 0) {
+ fprintf(stderr, "deflate not greedy\n");
+ exit(1);
+ }
+
+ /* Feed in already compressed data and switch to no compression: */
+ deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
+ c_stream.next_in = compr;
+ c_stream.avail_in = (uInt)comprLen/2;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ /* Switch back to compressing mode: */
+ deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
+ c_stream.next_in = uncompr;
+ c_stream.avail_in = (uInt)uncomprLen;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ fprintf(stderr, "deflate should report Z_STREAM_END\n");
+ exit(1);
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with large buffers
+ */
+void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = (alloc_func)0;
+ d_stream.zfree = (free_func)0;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = (uInt)comprLen;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ for (;;) {
+ d_stream.next_out = uncompr; /* discard the output */
+ d_stream.avail_out = (uInt)uncomprLen;
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "large inflate");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
+ fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
+ exit(1);
+ } else {
+ printf("large_inflate(): OK\n");
+ }
+}
+
+/* ===========================================================================
+ * Test deflate() with full flush
+ */
+void test_flush(compr, comprLen)
+ Byte *compr;
+ uLong *comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+ int len = strlen(hello)+1;
+
+ c_stream.zalloc = (alloc_func)0;
+ c_stream.zfree = (free_func)0;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_in = (Bytef*)hello;
+ c_stream.next_out = compr;
+ c_stream.avail_in = 3;
+ c_stream.avail_out = (uInt)*comprLen;
+ err = deflate(&c_stream, Z_FULL_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ compr[3]++; /* force an error in first compressed block */
+ c_stream.avail_in = len - 3;
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ CHECK_ERR(err, "deflate");
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+
+ *comprLen = c_stream.total_out;
+}
+
+/* ===========================================================================
+ * Test inflateSync()
+ */
+void test_sync(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = (alloc_func)0;
+ d_stream.zfree = (free_func)0;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = 2; /* just read the zlib header */
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ d_stream.next_out = uncompr;
+ d_stream.avail_out = (uInt)uncomprLen;
+
+ inflate(&d_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "inflate");
+
+ d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */
+ err = inflateSync(&d_stream); /* but skip the damaged part */
+ CHECK_ERR(err, "inflateSync");
+
+ err = inflate(&d_stream, Z_FINISH);
+ if (err != Z_DATA_ERROR) {
+ fprintf(stderr, "inflate should report DATA_ERROR\n");
+ /* Because of incorrect adler32 */
+ exit(1);
+ }
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ printf("after inflateSync(): hel%s\n", (char *)uncompr);
+}
+
+/* ===========================================================================
+ * Test deflate() with preset dictionary
+ */
+void test_dict_deflate(compr, comprLen)
+ Byte *compr;
+ uLong comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+
+ c_stream.zalloc = (alloc_func)0;
+ c_stream.zfree = (free_func)0;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ err = deflateSetDictionary(&c_stream,
+ (const Bytef*)dictionary, sizeof(dictionary));
+ CHECK_ERR(err, "deflateSetDictionary");
+
+ dictId = c_stream.adler;
+ c_stream.next_out = compr;
+ c_stream.avail_out = (uInt)comprLen;
+
+ c_stream.next_in = (Bytef*)hello;
+ c_stream.avail_in = (uInt)strlen(hello)+1;
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ fprintf(stderr, "deflate should report Z_STREAM_END\n");
+ exit(1);
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with a preset dictionary
+ */
+void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = (alloc_func)0;
+ d_stream.zfree = (free_func)0;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = (uInt)comprLen;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ d_stream.next_out = uncompr;
+ d_stream.avail_out = (uInt)uncomprLen;
+
+ for (;;) {
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ if (err == Z_NEED_DICT) {
+ if (d_stream.adler != dictId) {
+ fprintf(stderr, "unexpected dictionary");
+ exit(1);
+ }
+ err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
+ sizeof(dictionary));
+ }
+ CHECK_ERR(err, "inflate with dict");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad inflate with dict\n");
+ exit(1);
+ } else {
+ printf("inflate with dictionary: %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Usage: example [output.gz [input.gz]]
+ */
+
+int main(argc, argv)
+ int argc;
+ char *argv[];
+{
+ Byte *compr, *uncompr;
+ uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
+ uLong uncomprLen = comprLen;
+ static const char* myVersion = ZLIB_VERSION;
+
+ if (zlibVersion()[0] != myVersion[0]) {
+ fprintf(stderr, "incompatible zlib version\n");
+ exit(1);
+
+ } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
+ fprintf(stderr, "warning: different zlib version\n");
+ }
+
+ compr = (Byte*)calloc((uInt)comprLen, 1);
+ uncompr = (Byte*)calloc((uInt)uncomprLen, 1);
+ /* compr and uncompr are cleared to avoid reading uninitialized
+ * data and to ensure that uncompr compresses well.
+ */
+ if (compr == Z_NULL || uncompr == Z_NULL) {
+ printf("out of memory\n");
+ exit(1);
+ }
+ test_compress(compr, comprLen, uncompr, uncomprLen);
+
+ test_gzio((argc > 1 ? argv[1] : TESTFILE),
+ (argc > 2 ? argv[2] : TESTFILE),
+ uncompr, (int)uncomprLen);
+
+ test_deflate(compr, comprLen);
+ test_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ test_large_deflate(compr, comprLen, uncompr, uncomprLen);
+ test_large_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ test_flush(compr, &comprLen);
+ test_sync(compr, comprLen, uncompr, uncomprLen);
+ comprLen = uncomprLen;
+
+ test_dict_deflate(compr, comprLen);
+ test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ exit(0);
+ return 0; /* to avoid warning */
+}
--- /dev/null
+/* gzio.c -- IO on .gz files
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Compile this file with -DNO_DEFLATE to avoid the compression code.
+ */
+
+/* @(#) $Id$ */
+
+#include <stdio.h>
+
+#include "zutil.h"
+
+struct internal_state {int dummy;}; /* for buggy compilers */
+
+#ifndef Z_BUFSIZE
+# ifdef MAXSEG_64K
+# define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
+# else
+# define Z_BUFSIZE 16384
+# endif
+#endif
+#ifndef Z_PRINTF_BUFSIZE
+# define Z_PRINTF_BUFSIZE 4096
+#endif
+
+#define ALLOC(size) malloc(size)
+#define TRYFREE(p) {if (p) free(p);}
+
+static int gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
+#define HEAD_CRC 0x02 /* bit 1 set: header CRC present */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define RESERVED 0xE0 /* bits 5..7: reserved */
+
+typedef struct gz_stream {
+ z_stream stream;
+ int z_err; /* error code for last stream operation */
+ int z_eof; /* set if end of input file */
+ FILE *file; /* .gz file */
+ Byte *inbuf; /* input buffer */
+ Byte *outbuf; /* output buffer */
+ uLong crc; /* crc32 of uncompressed data */
+ char *msg; /* error message */
+ char *path; /* path name for debugging only */
+ int transparent; /* 1 if input file is not a .gz file */
+ char mode; /* 'w' or 'r' */
+ long startpos; /* start of compressed data in file (header skipped) */
+} gz_stream;
+
+
+local gzFile gz_open OF((const char *path, const char *mode, int fd));
+local int do_flush OF((gzFile file, int flush));
+local int get_byte OF((gz_stream *s));
+local void check_header OF((gz_stream *s));
+local int destroy OF((gz_stream *s));
+local void putLong OF((FILE *file, uLong x));
+local uLong getLong OF((gz_stream *s));
+
+/* ===========================================================================
+ Opens a gzip (.gz) file for reading or writing. The mode parameter
+ is as in fopen ("rb" or "wb"). The file is given either by file descriptor
+ or path name (if fd == -1).
+ gz_open return NULL if the file could not be opened or if there was
+ insufficient memory to allocate the (de)compression state; errno
+ can be checked to distinguish the two cases (if errno is zero, the
+ zlib error is Z_MEM_ERROR).
+*/
+local gzFile gz_open (path, mode, fd)
+ const char *path;
+ const char *mode;
+ int fd;
+{
+ int err;
+ int level = Z_DEFAULT_COMPRESSION; /* compression level */
+ int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
+ char *p = (char*)mode;
+ gz_stream *s;
+ char fmode[80]; /* copy of mode, without the compression level */
+ char *m = fmode;
+
+ if (!path || !mode) return Z_NULL;
+
+ s = (gz_stream *)ALLOC(sizeof(gz_stream));
+ if (!s) return Z_NULL;
+
+ s->stream.zalloc = (alloc_func)0;
+ s->stream.zfree = (free_func)0;
+ s->stream.opaque = (voidpf)0;
+ s->stream.next_in = s->inbuf = Z_NULL;
+ s->stream.next_out = s->outbuf = Z_NULL;
+ s->stream.avail_in = s->stream.avail_out = 0;
+ s->file = NULL;
+ s->z_err = Z_OK;
+ s->z_eof = 0;
+ s->crc = crc32(0L, Z_NULL, 0);
+ s->msg = NULL;
+ s->transparent = 0;
+
+ s->path = (char*)ALLOC(strlen(path)+1);
+ if (s->path == NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ strcpy(s->path, path); /* do this early for debugging */
+
+ s->mode = '\0';
+ do {
+ if (*p == 'r') s->mode = 'r';
+ if (*p == 'w' || *p == 'a') s->mode = 'w';
+ if (*p >= '0' && *p <= '9') {
+ level = *p - '0';
+ } else if (*p == 'f') {
+ strategy = Z_FILTERED;
+ } else if (*p == 'h') {
+ strategy = Z_HUFFMAN_ONLY;
+ } else {
+ *m++ = *p; /* copy the mode */
+ }
+ } while (*p++ && m != fmode + sizeof(fmode));
+ if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
+
+ if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+ err = Z_STREAM_ERROR;
+#else
+ err = deflateInit2(&(s->stream), level,
+ Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
+ /* windowBits is passed < 0 to suppress zlib header */
+
+ s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+#endif
+ if (err != Z_OK || s->outbuf == Z_NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ } else {
+ s->stream.next_in = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
+
+ err = inflateInit2(&(s->stream), -MAX_WBITS);
+ /* windowBits is passed < 0 to tell that there is no zlib header.
+ * Note that in this case inflate *requires* an extra "dummy" byte
+ * after the compressed stream in order to complete decompression and
+ * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
+ * present after the compressed stream.
+ */
+ if (err != Z_OK || s->inbuf == Z_NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ }
+ s->stream.avail_out = Z_BUFSIZE;
+
+ errno = 0;
+ s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
+
+ if (s->file == NULL) {
+ return destroy(s), (gzFile)Z_NULL;
+ }
+ if (s->mode == 'w') {
+ /* Write a very simple .gz header:
+ */
+ fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
+ Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
+ s->startpos = 10L;
+ /* We use 10L instead of ftell(s->file) to because ftell causes an
+ * fflush on some systems. This version of the library doesn't use
+ * startpos anyway in write mode, so this initialization is not
+ * necessary.
+ */
+ } else {
+ check_header(s); /* skip the .gz header */
+ s->startpos = (ftell(s->file) - s->stream.avail_in);
+ }
+
+ return (gzFile)s;
+}
+
+/* ===========================================================================
+ Opens a gzip (.gz) file for reading or writing.
+*/
+gzFile ZEXPORT gzopen (path, mode)
+ const char *path;
+ const char *mode;
+{
+ return gz_open (path, mode, -1);
+}
+
+/* ===========================================================================
+ Associate a gzFile with the file descriptor fd. fd is not dup'ed here
+ to mimic the behavio(u)r of fdopen.
+*/
+gzFile ZEXPORT gzdopen (fd, mode)
+ int fd;
+ const char *mode;
+{
+ char name[20];
+
+ if (fd < 0) return (gzFile)Z_NULL;
+ sprintf(name, "<fd:%d>", fd); /* for debugging */
+
+ return gz_open (name, mode, fd);
+}
+
+/* ===========================================================================
+ * Update the compression level and strategy
+ */
+int ZEXPORT gzsetparams (file, level, strategy)
+ gzFile file;
+ int level;
+ int strategy;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+ /* Make room to allow flushing */
+ if (s->stream.avail_out == 0) {
+
+ s->stream.next_out = s->outbuf;
+ if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+ s->z_err = Z_ERRNO;
+ }
+ s->stream.avail_out = Z_BUFSIZE;
+ }
+
+ return deflateParams (&(s->stream), level, strategy);
+}
+
+/* ===========================================================================
+ Read a byte from a gz_stream; update next_in and avail_in. Return EOF
+ for end of file.
+ IN assertion: the stream s has been sucessfully opened for reading.
+*/
+local int get_byte(s)
+ gz_stream *s;
+{
+ if (s->z_eof) return EOF;
+ if (s->stream.avail_in == 0) {
+ errno = 0;
+ s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+ if (s->stream.avail_in == 0) {
+ s->z_eof = 1;
+ if (ferror(s->file)) s->z_err = Z_ERRNO;
+ return EOF;
+ }
+ s->stream.next_in = s->inbuf;
+ }
+ s->stream.avail_in--;
+ return *(s->stream.next_in)++;
+}
+
+/* ===========================================================================
+ Check the gzip header of a gz_stream opened for reading. Set the stream
+ mode to transparent if the gzip magic header is not present; set s->err
+ to Z_DATA_ERROR if the magic header is present but the rest of the header
+ is incorrect.
+ IN assertion: the stream s has already been created sucessfully;
+ s->stream.avail_in is zero for the first time, but may be non-zero
+ for concatenated .gz files.
+*/
+local void check_header(s)
+ gz_stream *s;
+{
+ int method; /* method byte */
+ int flags; /* flags byte */
+ uInt len;
+ int c;
+
+ /* Check the gzip magic header */
+ for (len = 0; len < 2; len++) {
+ c = get_byte(s);
+ if (c != gz_magic[len]) {
+ if (len != 0) s->stream.avail_in++, s->stream.next_in--;
+ if (c != EOF) {
+ s->stream.avail_in++, s->stream.next_in--;
+ s->transparent = 1;
+ }
+ s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END;
+ return;
+ }
+ }
+ method = get_byte(s);
+ flags = get_byte(s);
+ if (method != Z_DEFLATED || (flags & RESERVED) != 0) {
+ s->z_err = Z_DATA_ERROR;
+ return;
+ }
+
+ /* Discard time, xflags and OS code: */
+ for (len = 0; len < 6; len++) (void)get_byte(s);
+
+ if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
+ len = (uInt)get_byte(s);
+ len += ((uInt)get_byte(s))<<8;
+ /* len is garbage if EOF but the loop below will quit anyway */
+ while (len-- != 0 && get_byte(s) != EOF) ;
+ }
+ if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
+ while ((c = get_byte(s)) != 0 && c != EOF) ;
+ }
+ if ((flags & COMMENT) != 0) { /* skip the .gz file comment */
+ while ((c = get_byte(s)) != 0 && c != EOF) ;
+ }
+ if ((flags & HEAD_CRC) != 0) { /* skip the header crc */
+ for (len = 0; len < 2; len++) (void)get_byte(s);
+ }
+ s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
+}
+
+ /* ===========================================================================
+ * Cleanup then free the given gz_stream. Return a zlib error code.
+ Try freeing in the reverse order of allocations.
+ */
+local int destroy (s)
+ gz_stream *s;
+{
+ int err = Z_OK;
+
+ if (!s) return Z_STREAM_ERROR;
+
+ TRYFREE(s->msg);
+
+ if (s->stream.state != NULL) {
+ if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+ err = Z_STREAM_ERROR;
+#else
+ err = deflateEnd(&(s->stream));
+#endif
+ } else if (s->mode == 'r') {
+ err = inflateEnd(&(s->stream));
+ }
+ }
+ if (s->file != NULL && fclose(s->file)) {
+#ifdef ESPIPE
+ if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
+#endif
+ err = Z_ERRNO;
+ }
+ if (s->z_err < 0) err = s->z_err;
+
+ TRYFREE(s->inbuf);
+ TRYFREE(s->outbuf);
+ TRYFREE(s->path);
+ TRYFREE(s);
+ return err;
+}
+
+/* ===========================================================================
+ Reads the given number of uncompressed bytes from the compressed file.
+ gzread returns the number of bytes actually read (0 for end of file).
+*/
+int ZEXPORT gzread (file, buf, len)
+ gzFile file;
+ voidp buf;
+ unsigned len;
+{
+ gz_stream *s = (gz_stream*)file;
+ Bytef *start = (Bytef*)buf; /* starting point for crc computation */
+ Byte *next_out; /* == stream.next_out but not forced far (for MSDOS) */
+
+ if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
+
+ if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
+ if (s->z_err == Z_STREAM_END) return 0; /* EOF */
+
+ next_out = (Byte*)buf;
+ s->stream.next_out = (Bytef*)buf;
+ s->stream.avail_out = len;
+
+ while (s->stream.avail_out != 0) {
+
+ if (s->transparent) {
+ /* Copy first the lookahead bytes: */
+ uInt n = s->stream.avail_in;
+ if (n > s->stream.avail_out) n = s->stream.avail_out;
+ if (n > 0) {
+ zmemcpy(s->stream.next_out, s->stream.next_in, n);
+ next_out += n;
+ s->stream.next_out = next_out;
+ s->stream.next_in += n;
+ s->stream.avail_out -= n;
+ s->stream.avail_in -= n;
+ }
+ if (s->stream.avail_out > 0) {
+ s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out,
+ s->file);
+ }
+ len -= s->stream.avail_out;
+ s->stream.total_in += (uLong)len;
+ s->stream.total_out += (uLong)len;
+ if (len == 0) s->z_eof = 1;
+ return (int)len;
+ }
+ if (s->stream.avail_in == 0 && !s->z_eof) {
+
+ errno = 0;
+ s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+ if (s->stream.avail_in == 0) {
+ s->z_eof = 1;
+ if (ferror(s->file)) {
+ s->z_err = Z_ERRNO;
+ break;
+ }
+ }
+ s->stream.next_in = s->inbuf;
+ }
+ s->z_err = inflate(&(s->stream), Z_NO_FLUSH);
+
+ if (s->z_err == Z_STREAM_END) {
+ /* Check CRC and original size */
+ s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+ start = s->stream.next_out;
+
+ if (getLong(s) != s->crc) {
+ s->z_err = Z_DATA_ERROR;
+ } else {
+ (void)getLong(s);
+ /* The uncompressed length returned by above getlong() may
+ * be different from s->stream.total_out) in case of
+ * concatenated .gz files. Check for such files:
+ */
+ check_header(s);
+ if (s->z_err == Z_OK) {
+ uLong total_in = s->stream.total_in;
+ uLong total_out = s->stream.total_out;
+
+ inflateReset(&(s->stream));
+ s->stream.total_in = total_in;
+ s->stream.total_out = total_out;
+ s->crc = crc32(0L, Z_NULL, 0);
+ }
+ }
+ }
+ if (s->z_err != Z_OK || s->z_eof) break;
+ }
+ s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+
+ return (int)(len - s->stream.avail_out);
+}
+
+
+/* ===========================================================================
+ Reads one byte from the compressed file. gzgetc returns this byte
+ or -1 in case of end of file or error.
+*/
+int ZEXPORT gzgetc(file)
+ gzFile file;
+{
+ unsigned char c;
+
+ return gzread(file, &c, 1) == 1 ? c : -1;
+}
+
+
+/* ===========================================================================
+ Reads bytes from the compressed file until len-1 characters are
+ read, or a newline character is read and transferred to buf, or an
+ end-of-file condition is encountered. The string is then terminated
+ with a null character.
+ gzgets returns buf, or Z_NULL in case of error.
+
+ The current implementation is not optimized at all.
+*/
+char * ZEXPORT gzgets(file, buf, len)
+ gzFile file;
+ char *buf;
+ int len;
+{
+ char *b = buf;
+ if (buf == Z_NULL || len <= 0) return Z_NULL;
+
+ while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
+ *buf = '\0';
+ return b == buf && len > 0 ? Z_NULL : b;
+}
+
+
+#ifndef NO_DEFLATE
+/* ===========================================================================
+ Writes the given number of uncompressed bytes into the compressed file.
+ gzwrite returns the number of bytes actually written (0 in case of error).
+*/
+int ZEXPORT gzwrite (file, buf, len)
+ gzFile file;
+ const voidp buf;
+ unsigned len;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+ s->stream.next_in = (Bytef*)buf;
+ s->stream.avail_in = len;
+
+ while (s->stream.avail_in != 0) {
+
+ if (s->stream.avail_out == 0) {
+
+ s->stream.next_out = s->outbuf;
+ if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+ s->z_err = Z_ERRNO;
+ break;
+ }
+ s->stream.avail_out = Z_BUFSIZE;
+ }
+ s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
+ if (s->z_err != Z_OK) break;
+ }
+ s->crc = crc32(s->crc, (const Bytef *)buf, len);
+
+ return (int)(len - s->stream.avail_in);
+}
+
+/* ===========================================================================
+ Converts, formats, and writes the args to the compressed file under
+ control of the format string, as in fprintf. gzprintf returns the number of
+ uncompressed bytes actually written (0 in case of error).
+*/
+#ifdef STDC
+#include <stdarg.h>
+
+int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
+{
+ char buf[Z_PRINTF_BUFSIZE];
+ va_list va;
+ int len;
+
+ va_start(va, format);
+#ifdef HAS_vsnprintf
+ (void)vsnprintf(buf, sizeof(buf), format, va);
+#else
+ (void)vsprintf(buf, format, va);
+#endif
+ va_end(va);
+ len = strlen(buf); /* some *sprintf don't return the nb of bytes written */
+ if (len <= 0) return 0;
+
+ return gzwrite(file, buf, (unsigned)len);
+}
+#else /* not ANSI C */
+
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+ a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+ gzFile file;
+ const char *format;
+ int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+ a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+ char buf[Z_PRINTF_BUFSIZE];
+ int len;
+
+#ifdef HAS_snprintf
+ snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#else
+ sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
+ a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#endif
+ len = strlen(buf); /* old sprintf doesn't return the nb of bytes written */
+ if (len <= 0) return 0;
+
+ return gzwrite(file, buf, len);
+}
+#endif
+
+/* ===========================================================================
+ Writes c, converted to an unsigned char, into the compressed file.
+ gzputc returns the value that was written, or -1 in case of error.
+*/
+int ZEXPORT gzputc(file, c)
+ gzFile file;
+ int c;
+{
+ unsigned char cc = (unsigned char) c; /* required for big endian systems */
+
+ return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
+}
+
+
+/* ===========================================================================
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+ gzputs returns the number of characters written, or -1 in case of error.
+*/
+int ZEXPORT gzputs(file, s)
+ gzFile file;
+ const char *s;
+{
+ return gzwrite(file, (char*)s, (unsigned)strlen(s));
+}
+
+
+/* ===========================================================================
+ Flushes all pending output into the compressed file. The parameter
+ flush is as in the deflate() function.
+*/
+local int do_flush (file, flush)
+ gzFile file;
+ int flush;
+{
+ uInt len;
+ int done = 0;
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+ s->stream.avail_in = 0; /* should be zero already anyway */
+
+ for (;;) {
+ len = Z_BUFSIZE - s->stream.avail_out;
+
+ if (len != 0) {
+ if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) {
+ s->z_err = Z_ERRNO;
+ return Z_ERRNO;
+ }
+ s->stream.next_out = s->outbuf;
+ s->stream.avail_out = Z_BUFSIZE;
+ }
+ if (done) break;
+ s->z_err = deflate(&(s->stream), flush);
+
+ /* Ignore the second of two consecutive flushes: */
+ if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
+
+ /* deflate has finished flushing only when it hasn't used up
+ * all the available space in the output buffer:
+ */
+ done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END);
+
+ if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
+ }
+ return s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+
+int ZEXPORT gzflush (file, flush)
+ gzFile file;
+ int flush;
+{
+ gz_stream *s = (gz_stream*)file;
+ int err = do_flush (file, flush);
+
+ if (err) return err;
+ fflush(s->file);
+ return s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+#endif /* NO_DEFLATE */
+
+/* ===========================================================================
+ Sets the starting position for the next gzread or gzwrite on the given
+ compressed file. The offset represents a number of bytes in the
+ gzseek returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error.
+ SEEK_END is not implemented, returns error.
+ In this version of the library, gzseek can be extremely slow.
+*/
+z_off_t ZEXPORT gzseek (file, offset, whence)
+ gzFile file;
+ z_off_t offset;
+ int whence;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || whence == SEEK_END ||
+ s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
+ return -1L;
+ }
+
+ if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+ return -1L;
+#else
+ if (whence == SEEK_SET) {
+ offset -= s->stream.total_in;
+ }
+ if (offset < 0) return -1L;
+
+ /* At this point, offset is the number of zero bytes to write. */
+ if (s->inbuf == Z_NULL) {
+ s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
+ zmemzero(s->inbuf, Z_BUFSIZE);
+ }
+ while (offset > 0) {
+ uInt size = Z_BUFSIZE;
+ if (offset < Z_BUFSIZE) size = (uInt)offset;
+
+ size = gzwrite(file, s->inbuf, size);
+ if (size == 0) return -1L;
+
+ offset -= size;
+ }
+ return (z_off_t)s->stream.total_in;
+#endif
+ }
+ /* Rest of function is for reading only */
+
+ /* compute absolute position */
+ if (whence == SEEK_CUR) {
+ offset += s->stream.total_out;
+ }
+ if (offset < 0) return -1L;
+
+ if (s->transparent) {
+ /* map to fseek */
+ s->stream.avail_in = 0;
+ s->stream.next_in = s->inbuf;
+ if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
+
+ s->stream.total_in = s->stream.total_out = (uLong)offset;
+ return offset;
+ }
+
+ /* For a negative seek, rewind and use positive seek */
+ if ((uLong)offset >= s->stream.total_out) {
+ offset -= s->stream.total_out;
+ } else if (gzrewind(file) < 0) {
+ return -1L;
+ }
+ /* offset is now the number of bytes to skip. */
+
+ if (offset != 0 && s->outbuf == Z_NULL) {
+ s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+ }
+ while (offset > 0) {
+ int size = Z_BUFSIZE;
+ if (offset < Z_BUFSIZE) size = (int)offset;
+
+ size = gzread(file, s->outbuf, (uInt)size);
+ if (size <= 0) return -1L;
+ offset -= size;
+ }
+ return (z_off_t)s->stream.total_out;
+}
+
+/* ===========================================================================
+ Rewinds input file.
+*/
+int ZEXPORT gzrewind (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL || s->mode != 'r') return -1;
+
+ s->z_err = Z_OK;
+ s->z_eof = 0;
+ s->stream.avail_in = 0;
+ s->stream.next_in = s->inbuf;
+ s->crc = crc32(0L, Z_NULL, 0);
+
+ if (s->startpos == 0) { /* not a compressed file */
+ rewind(s->file);
+ return 0;
+ }
+
+ (void) inflateReset(&s->stream);
+ return fseek(s->file, s->startpos, SEEK_SET);
+}
+
+/* ===========================================================================
+ Returns the starting position for the next gzread or gzwrite on the
+ given compressed file. This position represents a number of bytes in the
+ uncompressed data stream.
+*/
+z_off_t ZEXPORT gztell (file)
+ gzFile file;
+{
+ return gzseek(file, 0L, SEEK_CUR);
+}
+
+/* ===========================================================================
+ Returns 1 when EOF has previously been detected reading the given
+ input stream, otherwise zero.
+*/
+int ZEXPORT gzeof (file)
+ gzFile file;
+{
+ gz_stream *s = (gz_stream*)file;
+
+ return (s == NULL || s->mode != 'r') ? 0 : s->z_eof;
+}
+
+/* ===========================================================================
+ Outputs a long in LSB order to the given file
+*/
+local void putLong (file, x)
+ FILE *file;
+ uLong x;
+{
+ int n;
+ for (n = 0; n < 4; n++) {
+ fputc((int)(x & 0xff), file);
+ x >>= 8;
+ }
+}
+
+/* ===========================================================================
+ Reads a long in LSB order from the given gz_stream. Sets z_err in case
+ of error.
+*/
+local uLong getLong (s)
+ gz_stream *s;
+{
+ uLong x = (uLong)get_byte(s);
+ int c;
+
+ x += ((uLong)get_byte(s))<<8;
+ x += ((uLong)get_byte(s))<<16;
+ c = get_byte(s);
+ if (c == EOF) s->z_err = Z_DATA_ERROR;
+ x += ((uLong)c)<<24;
+ return x;
+}
+
+/* ===========================================================================
+ Flushes all pending output if necessary, closes the compressed file
+ and deallocates all the (de)compression state.
+*/
+int ZEXPORT gzclose (file)
+ gzFile file;
+{
+ int err;
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL) return Z_STREAM_ERROR;
+
+ if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+ return Z_STREAM_ERROR;
+#else
+ err = do_flush (file, Z_FINISH);
+ if (err != Z_OK) return destroy((gz_stream*)file);
+
+ putLong (s->file, s->crc);
+ putLong (s->file, s->stream.total_in);
+#endif
+ }
+ return destroy((gz_stream*)file);
+}
+
+/* ===========================================================================
+ Returns the error message for the last error which occured on the
+ given compressed file. errnum is set to zlib error number. If an
+ error occured in the file system and not in the compression library,
+ errnum is set to Z_ERRNO and the application may consult errno
+ to get the exact error code.
+*/
+const char* ZEXPORT gzerror (file, errnum)
+ gzFile file;
+ int *errnum;
+{
+ char *m;
+ gz_stream *s = (gz_stream*)file;
+
+ if (s == NULL) {
+ *errnum = Z_STREAM_ERROR;
+ return (const char*)ERR_MSG(Z_STREAM_ERROR);
+ }
+ *errnum = s->z_err;
+ if (*errnum == Z_OK) return (const char*)"";
+
+ m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
+
+ if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
+
+ TRYFREE(s->msg);
+ s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
+ strcpy(s->msg, s->path);
+ strcat(s->msg, ": ");
+ strcat(s->msg, m);
+ return (const char*)s->msg;
+}
--- /dev/null
+/* infblock.c -- interpret and process block types to last block
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "infblock.h"
+#include "inftrees.h"
+#include "infcodes.h"
+#include "infutil.h"
+
+struct inflate_codes_state {int dummy;}; /* for buggy compilers */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* Table for deflate from PKZIP's appnote.txt. */
+local const uInt border[] = { /* Order of the bit length code lengths */
+ 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+/*
+ Notes beyond the 1.93a appnote.txt:
+
+ 1. Distance pointers never point before the beginning of the output
+ stream.
+ 2. Distance pointers can point back across blocks, up to 32k away.
+ 3. There is an implied maximum of 7 bits for the bit length table and
+ 15 bits for the actual data.
+ 4. If only one code exists, then it is encoded using one bit. (Zero
+ would be more efficient, but perhaps a little confusing.) If two
+ codes exist, they are coded using one bit each (0 and 1).
+ 5. There is no way of sending zero distance codes--a dummy must be
+ sent if there are none. (History: a pre 2.0 version of PKZIP would
+ store blocks with no distance codes, but this was discovered to be
+ too harsh a criterion.) Valid only for 1.93a. 2.04c does allow
+ zero distance codes, which is sent as one code of zero bits in
+ length.
+ 6. There are up to 286 literal/length codes. Code 256 represents the
+ end-of-block. Note however that the static length tree defines
+ 288 codes just to fill out the Huffman codes. Codes 286 and 287
+ cannot be used though, since there is no length base or extra bits
+ defined for them. Similarily, there are up to 30 distance codes.
+ However, static trees define 32 codes (all 5 bits) to fill out the
+ Huffman codes, but the last two had better not show up in the data.
+ 7. Unzip can check dynamic Huffman blocks for complete code sets.
+ The exception is that a single code would not be complete (see #4).
+ 8. The five bits following the block type is really the number of
+ literal codes sent minus 257.
+ 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
+ (1+6+6). Therefore, to output three times the length, you output
+ three codes (1+1+1), whereas to output four times the same length,
+ you only need two codes (1+3). Hmm.
+ 10. In the tree reconstruction algorithm, Code = Code + Increment
+ only if BitLength(i) is not zero. (Pretty obvious.)
+ 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19)
+ 12. Note: length code 284 can represent 227-258, but length code 285
+ really is 258. The last length deserves its own, short code
+ since it gets used a lot in very redundant files. The length
+ 258 is special since 258 - 3 (the min match length) is 255.
+ 13. The literal/length and distance code bit lengths are read as a
+ single stream of lengths. It is possible (and advantageous) for
+ a repeat code (16, 17, or 18) to go across the boundary between
+ the two sets of lengths.
+ */
+
+
+void inflate_blocks_reset(s, z, c)
+inflate_blocks_statef *s;
+z_streamp z;
+uLongf *c;
+{
+ if (c != Z_NULL)
+ *c = s->check;
+ if (s->mode == BTREE || s->mode == DTREE)
+ ZFREE(z, s->sub.trees.blens);
+ if (s->mode == CODES)
+ inflate_codes_free(s->sub.decode.codes, z);
+ s->mode = TYPE;
+ s->bitk = 0;
+ s->bitb = 0;
+ s->read = s->write = s->window;
+ if (s->checkfn != Z_NULL)
+ z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0);
+ Tracev((stderr, "inflate: blocks reset\n"));
+}
+
+
+inflate_blocks_statef *inflate_blocks_new(z, c, w)
+z_streamp z;
+check_func c;
+uInt w;
+{
+ inflate_blocks_statef *s;
+
+ if ((s = (inflate_blocks_statef *)ZALLOC
+ (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
+ return s;
+ if ((s->hufts =
+ (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL)
+ {
+ ZFREE(z, s);
+ return Z_NULL;
+ }
+ if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
+ {
+ ZFREE(z, s->hufts);
+ ZFREE(z, s);
+ return Z_NULL;
+ }
+ s->end = s->window + w;
+ s->checkfn = c;
+ s->mode = TYPE;
+ Tracev((stderr, "inflate: blocks allocated\n"));
+ inflate_blocks_reset(s, z, Z_NULL);
+ return s;
+}
+
+
+int inflate_blocks(s, z, r)
+inflate_blocks_statef *s;
+z_streamp z;
+int r;
+{
+ uInt t; /* temporary storage */
+ uLong b; /* bit buffer */
+ uInt k; /* bits in bit buffer */
+ Bytef *p; /* input data pointer */
+ uInt n; /* bytes available there */
+ Bytef *q; /* output window write pointer */
+ uInt m; /* bytes to end of window or read pointer */
+
+ /* copy input/output information to locals (UPDATE macro restores) */
+ LOAD
+
+ /* process input based on current state */
+ while (1) switch (s->mode)
+ {
+ case TYPE:
+ NEEDBITS(3)
+ t = (uInt)b & 7;
+ s->last = t & 1;
+ switch (t >> 1)
+ {
+ case 0: /* stored */
+ Tracev((stderr, "inflate: stored block%s\n",
+ s->last ? " (last)" : ""));
+ DUMPBITS(3)
+ t = k & 7; /* go to byte boundary */
+ DUMPBITS(t)
+ s->mode = LENS; /* get length of stored block */
+ break;
+ case 1: /* fixed */
+ Tracev((stderr, "inflate: fixed codes block%s\n",
+ s->last ? " (last)" : ""));
+ {
+ uInt bl, bd;
+ inflate_huft *tl, *td;
+
+ inflate_trees_fixed(&bl, &bd, &tl, &td, z);
+ s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
+ if (s->sub.decode.codes == Z_NULL)
+ {
+ r = Z_MEM_ERROR;
+ LEAVE
+ }
+ }
+ DUMPBITS(3)
+ s->mode = CODES;
+ break;
+ case 2: /* dynamic */
+ Tracev((stderr, "inflate: dynamic codes block%s\n",
+ s->last ? " (last)" : ""));
+ DUMPBITS(3)
+ s->mode = TABLE;
+ break;
+ case 3: /* illegal */
+ DUMPBITS(3)
+ s->mode = BAD;
+ z->msg = (char*)"invalid block type";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+ break;
+ case LENS:
+ NEEDBITS(32)
+ if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
+ {
+ s->mode = BAD;
+ z->msg = (char*)"invalid stored block lengths";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+ s->sub.left = (uInt)b & 0xffff;
+ b = k = 0; /* dump bits */
+ Tracev((stderr, "inflate: stored length %u\n", s->sub.left));
+ s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
+ break;
+ case STORED:
+ if (n == 0)
+ LEAVE
+ NEEDOUT
+ t = s->sub.left;
+ if (t > n) t = n;
+ if (t > m) t = m;
+ zmemcpy(q, p, t);
+ p += t; n -= t;
+ q += t; m -= t;
+ if ((s->sub.left -= t) != 0)
+ break;
+ Tracev((stderr, "inflate: stored end, %lu total out\n",
+ z->total_out + (q >= s->read ? q - s->read :
+ (s->end - s->read) + (q - s->window))));
+ s->mode = s->last ? DRY : TYPE;
+ break;
+ case TABLE:
+ NEEDBITS(14)
+ s->sub.trees.table = t = (uInt)b & 0x3fff;
+#ifndef PKZIP_BUG_WORKAROUND
+ if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
+ {
+ s->mode = BAD;
+ z->msg = (char*)"too many length or distance symbols";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+#endif
+ t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
+ if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
+ {
+ r = Z_MEM_ERROR;
+ LEAVE
+ }
+ DUMPBITS(14)
+ s->sub.trees.index = 0;
+ Tracev((stderr, "inflate: table sizes ok\n"));
+ s->mode = BTREE;
+ case BTREE:
+ while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
+ {
+ NEEDBITS(3)
+ s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
+ DUMPBITS(3)
+ }
+ while (s->sub.trees.index < 19)
+ s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
+ s->sub.trees.bb = 7;
+ t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
+ &s->sub.trees.tb, s->hufts, z);
+ if (t != Z_OK)
+ {
+ r = t;
+ if (r == Z_DATA_ERROR)
+ {
+ ZFREE(z, s->sub.trees.blens);
+ s->mode = BAD;
+ }
+ LEAVE
+ }
+ s->sub.trees.index = 0;
+ Tracev((stderr, "inflate: bits tree ok\n"));
+ s->mode = DTREE;
+ case DTREE:
+ while (t = s->sub.trees.table,
+ s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
+ {
+ inflate_huft *h;
+ uInt i, j, c;
+
+ t = s->sub.trees.bb;
+ NEEDBITS(t)
+ h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
+ t = h->bits;
+ c = h->base;
+ if (c < 16)
+ {
+ DUMPBITS(t)
+ s->sub.trees.blens[s->sub.trees.index++] = c;
+ }
+ else /* c == 16..18 */
+ {
+ i = c == 18 ? 7 : c - 14;
+ j = c == 18 ? 11 : 3;
+ NEEDBITS(t + i)
+ DUMPBITS(t)
+ j += (uInt)b & inflate_mask[i];
+ DUMPBITS(i)
+ i = s->sub.trees.index;
+ t = s->sub.trees.table;
+ if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
+ (c == 16 && i < 1))
+ {
+ ZFREE(z, s->sub.trees.blens);
+ s->mode = BAD;
+ z->msg = (char*)"invalid bit length repeat";
+ r = Z_DATA_ERROR;
+ LEAVE
+ }
+ c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
+ do {
+ s->sub.trees.blens[i++] = c;
+ } while (--j);
+ s->sub.trees.index = i;
+ }
+ }
+ s->sub.trees.tb = Z_NULL;
+ {
+ uInt bl, bd;
+ inflate_huft *tl, *td;
+ inflate_codes_statef *c;
+
+ bl = 9; /* must be <= 9 for lookahead assumptions */
+ bd = 6; /* must be <= 9 for lookahead assumptions */
+ t = s->sub.trees.table;
+ t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
+ s->sub.trees.blens, &bl, &bd, &tl, &td,
+ s->hufts, z);
+ if (t != Z_OK)
+ {
+ if (t == (uInt)Z_DATA_ERROR)
+ {
+ ZFREE(z, s->sub.trees.blens);
+ s->mode = BAD;
+ }
+ r = t;
+ LEAVE
+ }
+ Tracev((stderr, "inflate: trees ok\n"));
+ if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
+ {
+ r = Z_MEM_ERROR;
+ LEAVE
+ }
+ s->sub.decode.codes = c;
+ }
+ ZFREE(z, s->sub.trees.blens);
+ s->mode = CODES;
+ case CODES:
+ UPDATE
+ if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
+ return inflate_flush(s, z, r);
+ r = Z_OK;
+ inflate_codes_free(s->sub.decode.codes, z);
+ LOAD
+ Tracev((stderr, "inflate: codes end, %lu total out\n",
+ z->total_out + (q >= s->read ? q - s->read :
+ (s->end - s->read) + (q - s->window))));
+ if (!s->last)
+ {
+ s->mode = TYPE;
+ break;
+ }
+ s->mode = DRY;
+ case DRY:
+ FLUSH
+ if (s->read != s->write)
+ LEAVE
+ s->mode = DONE;
+ case DONE:
+ r = Z_STREAM_END;
+ LEAVE
+ case BAD:
+ r = Z_DATA_ERROR;
+ LEAVE
+ default:
+ r = Z_STREAM_ERROR;
+ LEAVE
+ }
+}
+
+
+int inflate_blocks_free(s, z)
+inflate_blocks_statef *s;
+z_streamp z;
+{
+ inflate_blocks_reset(s, z, Z_NULL);
+ ZFREE(z, s->window);
+ ZFREE(z, s->hufts);
+ ZFREE(z, s);
+ Tracev((stderr, "inflate: blocks freed\n"));
+ return Z_OK;
+}
+
+
+void inflate_set_dictionary(s, d, n)
+inflate_blocks_statef *s;
+const Bytef *d;
+uInt n;
+{
+ zmemcpy(s->window, d, n);
+ s->read = s->write = s->window + n;
+}
+
+
+/* Returns true if inflate is currently at the end of a block generated
+ * by Z_SYNC_FLUSH or Z_FULL_FLUSH.
+ * IN assertion: s != Z_NULL
+ */
+int inflate_blocks_sync_point(s)
+inflate_blocks_statef *s;
+{
+ return s->mode == LENS;
+}
--- /dev/null
+/* infblock.h -- header to use infblock.c
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+struct inflate_blocks_state;
+typedef struct inflate_blocks_state FAR inflate_blocks_statef;
+
+extern inflate_blocks_statef * inflate_blocks_new OF((
+ z_streamp z,
+ check_func c, /* check function */
+ uInt w)); /* window size */
+
+extern int inflate_blocks OF((
+ inflate_blocks_statef *,
+ z_streamp ,
+ int)); /* initial return code */
+
+extern void inflate_blocks_reset OF((
+ inflate_blocks_statef *,
+ z_streamp ,
+ uLongf *)); /* check value on output */
+
+extern int inflate_blocks_free OF((
+ inflate_blocks_statef *,
+ z_streamp));
+
+extern void inflate_set_dictionary OF((
+ inflate_blocks_statef *s,
+ const Bytef *d, /* dictionary */
+ uInt n)); /* dictionary length */
+
+extern int inflate_blocks_sync_point OF((
+ inflate_blocks_statef *s));
--- /dev/null
+/* infcodes.c -- process literals and length/distance pairs
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "infblock.h"
+#include "infcodes.h"
+#include "infutil.h"
+#include "inffast.h"
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+typedef enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
+ START, /* x: set up for LEN */
+ LEN, /* i: get length/literal/eob next */
+ LENEXT, /* i: getting length extra (have base) */
+ DIST, /* i: get distance next */
+ DISTEXT, /* i: getting distance extra */
+ COPY, /* o: copying bytes in window, waiting for space */
+ LIT, /* o: got literal, waiting for output space */
+ WASH, /* o: got eob, possibly still output waiting */
+ END, /* x: got eob and all data flushed */
+ BADCODE} /* x: got error */
+inflate_codes_mode;
+
+/* inflate codes private state */
+struct inflate_codes_state {
+
+ /* mode */
+ inflate_codes_mode mode; /* current inflate_codes mode */
+
+ /* mode dependent information */
+ uInt len;
+ union {
+ struct {
+ inflate_huft *tree; /* pointer into tree */
+ uInt need; /* bits needed */
+ } code; /* if LEN or DIST, where in tree */
+ uInt lit; /* if LIT, literal */
+ struct {
+ uInt get; /* bits to get for extra */
+ uInt dist; /* distance back to copy from */
+ } copy; /* if EXT or COPY, where and how much */
+ } sub; /* submode */
+
+ /* mode independent information */
+ Byte lbits; /* ltree bits decoded per branch */
+ Byte dbits; /* dtree bits decoder per branch */
+ inflate_huft *ltree; /* literal/length/eob tree */
+ inflate_huft *dtree; /* distance tree */
+
+};
+
+
+inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
+uInt bl, bd;
+inflate_huft *tl;
+inflate_huft *td; /* need separate declaration for Borland C++ */
+z_streamp z;
+{
+ inflate_codes_statef *c;
+
+ if ((c = (inflate_codes_statef *)
+ ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
+ {
+ c->mode = START;
+ c->lbits = (Byte)bl;
+ c->dbits = (Byte)bd;
+ c->ltree = tl;
+ c->dtree = td;
+ Tracev((stderr, "inflate: codes new\n"));
+ }
+ return c;
+}
+
+
+int inflate_codes(s, z, r)
+inflate_blocks_statef *s;
+z_streamp z;
+int r;
+{
+ uInt j; /* temporary storage */
+ inflate_huft *t; /* temporary pointer */
+ uInt e; /* extra bits or operation */
+ uLong b; /* bit buffer */
+ uInt k; /* bits in bit buffer */
+ Bytef *p; /* input data pointer */
+ uInt n; /* bytes available there */
+ Bytef *q; /* output window write pointer */
+ uInt m; /* bytes to end of window or read pointer */
+ Bytef *f; /* pointer to copy strings from */
+ inflate_codes_statef *c = s->sub.decode.codes; /* codes state */
+
+ /* copy input/output information to locals (UPDATE macro restores) */
+ LOAD
+
+ /* process input and output based on current state */
+ while (1) switch (c->mode)
+ { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
+ case START: /* x: set up for LEN */
+#ifndef SLOW
+ if (m >= 258 && n >= 10)
+ {
+ UPDATE
+ r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
+ LOAD
+ if (r != Z_OK)
+ {
+ c->mode = r == Z_STREAM_END ? WASH : BADCODE;
+ break;
+ }
+ }
+#endif /* !SLOW */
+ c->sub.code.need = c->lbits;
+ c->sub.code.tree = c->ltree;
+ c->mode = LEN;
+ case LEN: /* i: get length/literal/eob next */
+ j = c->sub.code.need;
+ NEEDBITS(j)
+ t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
+ DUMPBITS(t->bits)
+ e = (uInt)(t->exop);
+ if (e == 0) /* literal */
+ {
+ c->sub.lit = t->base;
+ Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+ "inflate: literal '%c'\n" :
+ "inflate: literal 0x%02x\n", t->base));
+ c->mode = LIT;
+ break;
+ }
+ if (e & 16) /* length */
+ {
+ c->sub.copy.get = e & 15;
+ c->len = t->base;
+ c->mode = LENEXT;
+ break;
+ }
+ if ((e & 64) == 0) /* next table */
+ {
+ c->sub.code.need = e;
+ c->sub.code.tree = t + t->base;
+ break;
+ }
+ if (e & 32) /* end of block */
+ {
+ Tracevv((stderr, "inflate: end of block\n"));
+ c->mode = WASH;
+ break;
+ }
+ c->mode = BADCODE; /* invalid code */
+ z->msg = (char*)"invalid literal/length code";
+ r = Z_DATA_ERROR;
+ LEAVE
+ case LENEXT: /* i: getting length extra (have base) */
+ j = c->sub.copy.get;
+ NEEDBITS(j)
+ c->len += (uInt)b & inflate_mask[j];
+ DUMPBITS(j)
+ c->sub.code.need = c->dbits;
+ c->sub.code.tree = c->dtree;
+ Tracevv((stderr, "inflate: length %u\n", c->len));
+ c->mode = DIST;
+ case DIST: /* i: get distance next */
+ j = c->sub.code.need;
+ NEEDBITS(j)
+ t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
+ DUMPBITS(t->bits)
+ e = (uInt)(t->exop);
+ if (e & 16) /* distance */
+ {
+ c->sub.copy.get = e & 15;
+ c->sub.copy.dist = t->base;
+ c->mode = DISTEXT;
+ break;
+ }
+ if ((e & 64) == 0) /* next table */
+ {
+ c->sub.code.need = e;
+ c->sub.code.tree = t + t->base;
+ break;
+ }
+ c->mode = BADCODE; /* invalid code */
+ z->msg = (char*)"invalid distance code";
+ r = Z_DATA_ERROR;
+ LEAVE
+ case DISTEXT: /* i: getting distance extra */
+ j = c->sub.copy.get;
+ NEEDBITS(j)
+ c->sub.copy.dist += (uInt)b & inflate_mask[j];
+ DUMPBITS(j)
+ Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist));
+ c->mode = COPY;
+ case COPY: /* o: copying bytes in window, waiting for space */
+ f = q - c->sub.copy.dist;
+ while (f < s->window) /* modulo window size-"while" instead */
+ f += s->end - s->window; /* of "if" handles invalid distances */
+ while (c->len)
+ {
+ NEEDOUT
+ OUTBYTE(*f++)
+ if (f == s->end)
+ f = s->window;
+ c->len--;
+ }
+ c->mode = START;
+ break;
+ case LIT: /* o: got literal, waiting for output space */
+ NEEDOUT
+ OUTBYTE(c->sub.lit)
+ c->mode = START;
+ break;
+ case WASH: /* o: got eob, possibly more output */
+ if (k > 7) /* return unused byte, if any */
+ {
+ Assert(k < 16, "inflate_codes grabbed too many bytes")
+ k -= 8;
+ n++;
+ p--; /* can always return one */
+ }
+ FLUSH
+ if (s->read != s->write)
+ LEAVE
+ c->mode = END;
+ case END:
+ r = Z_STREAM_END;
+ LEAVE
+ case BADCODE: /* x: got error */
+ r = Z_DATA_ERROR;
+ LEAVE
+ default:
+ r = Z_STREAM_ERROR;
+ LEAVE
+ }
+#ifdef NEED_DUMMY_RETURN
+ return Z_STREAM_ERROR; /* Some dumb compilers complain without this */
+#endif
+}
+
+
+void inflate_codes_free(c, z)
+inflate_codes_statef *c;
+z_streamp z;
+{
+ ZFREE(z, c);
+ Tracev((stderr, "inflate: codes free\n"));
+}
--- /dev/null
+/* infcodes.h -- header to use infcodes.c
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+struct inflate_codes_state;
+typedef struct inflate_codes_state FAR inflate_codes_statef;
+
+extern inflate_codes_statef *inflate_codes_new OF((
+ uInt, uInt,
+ inflate_huft *, inflate_huft *,
+ z_streamp ));
+
+extern int inflate_codes OF((
+ inflate_blocks_statef *,
+ z_streamp ,
+ int));
+
+extern void inflate_codes_free OF((
+ inflate_codes_statef *,
+ z_streamp ));
+
--- /dev/null
+/* inffast.c -- process literals and length/distance pairs fast
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "infblock.h"
+#include "infcodes.h"
+#include "infutil.h"
+#include "inffast.h"
+
+struct inflate_codes_state {int dummy;}; /* for buggy compilers */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* macros for bit input with no checking and for returning unused bytes */
+#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
+#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;}
+
+/* Called with number of bytes left to write in window at least 258
+ (the maximum string length) and number of input bytes available
+ at least ten. The ten bytes are six bytes for the longest length/
+ distance pair plus four bytes for overloading the bit buffer. */
+
+int inflate_fast(bl, bd, tl, td, s, z)
+uInt bl, bd;
+inflate_huft *tl;
+inflate_huft *td; /* need separate declaration for Borland C++ */
+inflate_blocks_statef *s;
+z_streamp z;
+{
+ inflate_huft *t; /* temporary pointer */
+ uInt e; /* extra bits or operation */
+ uLong b; /* bit buffer */
+ uInt k; /* bits in bit buffer */
+ Bytef *p; /* input data pointer */
+ uInt n; /* bytes available there */
+ Bytef *q; /* output window write pointer */
+ uInt m; /* bytes to end of window or read pointer */
+ uInt ml; /* mask for literal/length tree */
+ uInt md; /* mask for distance tree */
+ uInt c; /* bytes to copy */
+ uInt d; /* distance back to copy from */
+ Bytef *r; /* copy source pointer */
+
+ /* load input, output, bit values */
+ LOAD
+
+ /* initialize masks */
+ ml = inflate_mask[bl];
+ md = inflate_mask[bd];
+
+ /* do until not enough input or output space for fast loop */
+ do { /* assume called with m >= 258 && n >= 10 */
+ /* get literal/length code */
+ GRABBITS(20) /* max bits for literal/length code */
+ if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
+ {
+ DUMPBITS(t->bits)
+ Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+ "inflate: * literal '%c'\n" :
+ "inflate: * literal 0x%02x\n", t->base));
+ *q++ = (Byte)t->base;
+ m--;
+ continue;
+ }
+ do {
+ DUMPBITS(t->bits)
+ if (e & 16)
+ {
+ /* get extra bits for length */
+ e &= 15;
+ c = t->base + ((uInt)b & inflate_mask[e]);
+ DUMPBITS(e)
+ Tracevv((stderr, "inflate: * length %u\n", c));
+
+ /* decode distance base of block to copy */
+ GRABBITS(15); /* max bits for distance code */
+ e = (t = td + ((uInt)b & md))->exop;
+ do {
+ DUMPBITS(t->bits)
+ if (e & 16)
+ {
+ /* get extra bits to add to distance base */
+ e &= 15;
+ GRABBITS(e) /* get extra bits (up to 13) */
+ d = t->base + ((uInt)b & inflate_mask[e]);
+ DUMPBITS(e)
+ Tracevv((stderr, "inflate: * distance %u\n", d));
+
+ /* do the copy */
+ m -= c;
+ r = q - d;
+ if (r < s->window) /* wrap if needed */
+ {
+ do {
+ r += s->end - s->window; /* force pointer in window */
+ } while (r < s->window); /* covers invalid distances */
+ e = s->end - r;
+ if (c > e)
+ {
+ c -= e; /* wrapped copy */
+ do {
+ *q++ = *r++;
+ } while (--e);
+ r = s->window;
+ do {
+ *q++ = *r++;
+ } while (--c);
+ }
+ else /* normal copy */
+ {
+ *q++ = *r++; c--;
+ *q++ = *r++; c--;
+ do {
+ *q++ = *r++;
+ } while (--c);
+ }
+ }
+ else /* normal copy */
+ {
+ *q++ = *r++; c--;
+ *q++ = *r++; c--;
+ do {
+ *q++ = *r++;
+ } while (--c);
+ }
+ break;
+ }
+ else if ((e & 64) == 0)
+ {
+ t += t->base;
+ e = (t += ((uInt)b & inflate_mask[e]))->exop;
+ }
+ else
+ {
+ z->msg = (char*)"invalid distance code";
+ UNGRAB
+ UPDATE
+ return Z_DATA_ERROR;
+ }
+ } while (1);
+ break;
+ }
+ if ((e & 64) == 0)
+ {
+ t += t->base;
+ if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0)
+ {
+ DUMPBITS(t->bits)
+ Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+ "inflate: * literal '%c'\n" :
+ "inflate: * literal 0x%02x\n", t->base));
+ *q++ = (Byte)t->base;
+ m--;
+ break;
+ }
+ }
+ else if (e & 32)
+ {
+ Tracevv((stderr, "inflate: * end of block\n"));
+ UNGRAB
+ UPDATE
+ return Z_STREAM_END;
+ }
+ else
+ {
+ z->msg = (char*)"invalid literal/length code";
+ UNGRAB
+ UPDATE
+ return Z_DATA_ERROR;
+ }
+ } while (1);
+ } while (m >= 258 && n >= 10);
+
+ /* not enough input or output--restore pointers and return */
+ UNGRAB
+ UPDATE
+ return Z_OK;
+}
--- /dev/null
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+extern int inflate_fast OF((
+ uInt,
+ uInt,
+ inflate_huft *,
+ inflate_huft *,
+ inflate_blocks_statef *,
+ z_streamp ));
--- /dev/null
+/* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by the maketree.c program
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+local uInt fixed_bl = 9;
+local uInt fixed_bd = 5;
+local inflate_huft fixed_tl[] = {
+ {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+ {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
+ {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
+ {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
+ {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
+ {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
+ {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
+ {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
+ {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+ {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
+ {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
+ {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
+ {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
+ {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
+ {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
+ {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
+ {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+ {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
+ {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
+ {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
+ {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
+ {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
+ {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
+ {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
+ {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+ {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
+ {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
+ {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
+ {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
+ {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
+ {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
+ {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
+ {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+ {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
+ {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
+ {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
+ {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
+ {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
+ {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
+ {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
+ {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+ {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
+ {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
+ {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
+ {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
+ {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
+ {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
+ {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
+ {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+ {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
+ {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
+ {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
+ {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
+ {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
+ {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
+ {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
+ {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+ {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
+ {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
+ {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
+ {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
+ {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
+ {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
+ {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
+ {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+ {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
+ {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
+ {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
+ {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
+ {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
+ {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
+ {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
+ {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+ {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
+ {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
+ {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
+ {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
+ {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
+ {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
+ {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
+ {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+ {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
+ {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
+ {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
+ {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
+ {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
+ {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
+ {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
+ {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+ {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
+ {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
+ {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
+ {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
+ {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
+ {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
+ {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
+ {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+ {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
+ {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
+ {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
+ {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
+ {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
+ {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
+ {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
+ {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+ {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
+ {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
+ {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
+ {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
+ {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
+ {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
+ {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
+ {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+ {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
+ {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
+ {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
+ {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
+ {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
+ {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
+ {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
+ {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+ {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
+ {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
+ {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
+ {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
+ {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
+ {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
+ {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
+ };
+local inflate_huft fixed_td[] = {
+ {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
+ {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
+ {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
+ {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
+ {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
+ {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
+ {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
+ {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
+ };
--- /dev/null
+/* inflate.c -- zlib interface to inflate modules
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "infblock.h"
+
+struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
+
+typedef enum {
+ METHOD, /* waiting for method byte */
+ FLAG, /* waiting for flag byte */
+ DICT4, /* four dictionary check bytes to go */
+ DICT3, /* three dictionary check bytes to go */
+ DICT2, /* two dictionary check bytes to go */
+ DICT1, /* one dictionary check byte to go */
+ DICT0, /* waiting for inflateSetDictionary */
+ BLOCKS, /* decompressing blocks */
+ CHECK4, /* four check bytes to go */
+ CHECK3, /* three check bytes to go */
+ CHECK2, /* two check bytes to go */
+ CHECK1, /* one check byte to go */
+ DONE, /* finished check, done */
+ BAD} /* got an error--stay here */
+inflate_mode;
+
+/* inflate private state */
+struct internal_state {
+
+ /* mode */
+ inflate_mode mode; /* current inflate mode */
+
+ /* mode dependent information */
+ union {
+ uInt method; /* if FLAGS, method byte */
+ struct {
+ uLong was; /* computed check value */
+ uLong need; /* stream check value */
+ } check; /* if CHECK, check values to compare */
+ uInt marker; /* if BAD, inflateSync's marker bytes count */
+ } sub; /* submode */
+
+ /* mode independent information */
+ int nowrap; /* flag for no wrapper */
+ uInt wbits; /* log2(window size) (8..15, defaults to 15) */
+ inflate_blocks_statef
+ *blocks; /* current inflate_blocks state */
+
+};
+
+
+int ZEXPORT inflateReset(z)
+z_streamp z;
+{
+ if (z == Z_NULL || z->state == Z_NULL)
+ return Z_STREAM_ERROR;
+ z->total_in = z->total_out = 0;
+ z->msg = Z_NULL;
+ z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
+ inflate_blocks_reset(z->state->blocks, z, Z_NULL);
+ Tracev((stderr, "inflate: reset\n"));
+ return Z_OK;
+}
+
+
+int ZEXPORT inflateEnd(z)
+z_streamp z;
+{
+ if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
+ return Z_STREAM_ERROR;
+ if (z->state->blocks != Z_NULL)
+ inflate_blocks_free(z->state->blocks, z);
+ ZFREE(z, z->state);
+ z->state = Z_NULL;
+ Tracev((stderr, "inflate: end\n"));
+ return Z_OK;
+}
+
+
+int ZEXPORT inflateInit2_(z, w, version, stream_size)
+z_streamp z;
+int w;
+const char *version;
+int stream_size;
+{
+ if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+ stream_size != sizeof(z_stream))
+ return Z_VERSION_ERROR;
+
+ /* initialize state */
+ if (z == Z_NULL)
+ return Z_STREAM_ERROR;
+ z->msg = Z_NULL;
+ if (z->zalloc == Z_NULL)
+ {
+ z->zalloc = zcalloc;
+ z->opaque = (voidpf)0;
+ }
+ if (z->zfree == Z_NULL) z->zfree = zcfree;
+ if ((z->state = (struct internal_state FAR *)
+ ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
+ return Z_MEM_ERROR;
+ z->state->blocks = Z_NULL;
+
+ /* handle undocumented nowrap option (no zlib header or check) */
+ z->state->nowrap = 0;
+ if (w < 0)
+ {
+ w = - w;
+ z->state->nowrap = 1;
+ }
+
+ /* set window size */
+ if (w < 8 || w > 15)
+ {
+ inflateEnd(z);
+ return Z_STREAM_ERROR;
+ }
+ z->state->wbits = (uInt)w;
+
+ /* create inflate_blocks state */
+ if ((z->state->blocks =
+ inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
+ == Z_NULL)
+ {
+ inflateEnd(z);
+ return Z_MEM_ERROR;
+ }
+ Tracev((stderr, "inflate: allocated\n"));
+
+ /* reset state */
+ inflateReset(z);
+ return Z_OK;
+}
+
+
+int ZEXPORT inflateInit_(z, version, stream_size)
+z_streamp z;
+const char *version;
+int stream_size;
+{
+ return inflateInit2_(z, DEF_WBITS, version, stream_size);
+}
+
+
+#define NEEDBYTE {if(z->avail_in==0)return r;r=f;}
+#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
+
+int ZEXPORT inflate(z, f)
+z_streamp z;
+int f;
+{
+ int r;
+ uInt b;
+
+ if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL)
+ return Z_STREAM_ERROR;
+ f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;
+ r = Z_BUF_ERROR;
+ while (1) switch (z->state->mode)
+ {
+ case METHOD:
+ NEEDBYTE
+ if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
+ {
+ z->state->mode = BAD;
+ z->msg = (char*)"unknown compression method";
+ z->state->sub.marker = 5; /* can't try inflateSync */
+ break;
+ }
+ if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
+ {
+ z->state->mode = BAD;
+ z->msg = (char*)"invalid window size";
+ z->state->sub.marker = 5; /* can't try inflateSync */
+ break;
+ }
+ z->state->mode = FLAG;
+ case FLAG:
+ NEEDBYTE
+ b = NEXTBYTE;
+ if (((z->state->sub.method << 8) + b) % 31)
+ {
+ z->state->mode = BAD;
+ z->msg = (char*)"incorrect header check";
+ z->state->sub.marker = 5; /* can't try inflateSync */
+ break;
+ }
+ Tracev((stderr, "inflate: zlib header ok\n"));
+ if (!(b & PRESET_DICT))
+ {
+ z->state->mode = BLOCKS;
+ break;
+ }
+ z->state->mode = DICT4;
+ case DICT4:
+ NEEDBYTE
+ z->state->sub.check.need = (uLong)NEXTBYTE << 24;
+ z->state->mode = DICT3;
+ case DICT3:
+ NEEDBYTE
+ z->state->sub.check.need += (uLong)NEXTBYTE << 16;
+ z->state->mode = DICT2;
+ case DICT2:
+ NEEDBYTE
+ z->state->sub.check.need += (uLong)NEXTBYTE << 8;
+ z->state->mode = DICT1;
+ case DICT1:
+ NEEDBYTE
+ z->state->sub.check.need += (uLong)NEXTBYTE;
+ z->adler = z->state->sub.check.need;
+ z->state->mode = DICT0;
+ return Z_NEED_DICT;
+ case DICT0:
+ z->state->mode = BAD;
+ z->msg = (char*)"need dictionary";
+ z->state->sub.marker = 0; /* can try inflateSync */
+ return Z_STREAM_ERROR;
+ case BLOCKS:
+ r = inflate_blocks(z->state->blocks, z, r);
+ if (r == Z_DATA_ERROR)
+ {
+ z->state->mode = BAD;
+ z->state->sub.marker = 0; /* can try inflateSync */
+ break;
+ }
+ if (r == Z_OK)
+ r = f;
+ if (r != Z_STREAM_END)
+ return r;
+ r = f;
+ inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
+ if (z->state->nowrap)
+ {
+ z->state->mode = DONE;
+ break;
+ }
+ z->state->mode = CHECK4;
+ case CHECK4:
+ NEEDBYTE
+ z->state->sub.check.need = (uLong)NEXTBYTE << 24;
+ z->state->mode = CHECK3;
+ case CHECK3:
+ NEEDBYTE
+ z->state->sub.check.need += (uLong)NEXTBYTE << 16;
+ z->state->mode = CHECK2;
+ case CHECK2:
+ NEEDBYTE
+ z->state->sub.check.need += (uLong)NEXTBYTE << 8;
+ z->state->mode = CHECK1;
+ case CHECK1:
+ NEEDBYTE
+ z->state->sub.check.need += (uLong)NEXTBYTE;
+
+ if (z->state->sub.check.was != z->state->sub.check.need)
+ {
+ z->state->mode = BAD;
+ z->msg = (char*)"incorrect data check";
+ z->state->sub.marker = 5; /* can't try inflateSync */
+ break;
+ }
+ Tracev((stderr, "inflate: zlib check ok\n"));
+ z->state->mode = DONE;
+ case DONE:
+ return Z_STREAM_END;
+ case BAD:
+ return Z_DATA_ERROR;
+ default:
+ return Z_STREAM_ERROR;
+ }
+#ifdef NEED_DUMMY_RETURN
+ return Z_STREAM_ERROR; /* Some dumb compilers complain without this */
+#endif
+}
+
+
+int ZEXPORT inflateSetDictionary(z, dictionary, dictLength)
+z_streamp z;
+const Bytef *dictionary;
+uInt dictLength;
+{
+ uInt length = dictLength;
+
+ if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0)
+ return Z_STREAM_ERROR;
+
+ if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR;
+ z->adler = 1L;
+
+ if (length >= ((uInt)1<<z->state->wbits))
+ {
+ length = (1<<z->state->wbits)-1;
+ dictionary += dictLength - length;
+ }
+ inflate_set_dictionary(z->state->blocks, dictionary, length);
+ z->state->mode = BLOCKS;
+ return Z_OK;
+}
+
+
+int ZEXPORT inflateSync(z)
+z_streamp z;
+{
+ uInt n; /* number of bytes to look at */
+ Bytef *p; /* pointer to bytes */
+ uInt m; /* number of marker bytes found in a row */
+ uLong r, w; /* temporaries to save total_in and total_out */
+
+ /* set up */
+ if (z == Z_NULL || z->state == Z_NULL)
+ return Z_STREAM_ERROR;
+ if (z->state->mode != BAD)
+ {
+ z->state->mode = BAD;
+ z->state->sub.marker = 0;
+ }
+ if ((n = z->avail_in) == 0)
+ return Z_BUF_ERROR;
+ p = z->next_in;
+ m = z->state->sub.marker;
+
+ /* search */
+ while (n && m < 4)
+ {
+ static const Byte mark[4] = {0, 0, 0xff, 0xff};
+ if (*p == mark[m])
+ m++;
+ else if (*p)
+ m = 0;
+ else
+ m = 4 - m;
+ p++, n--;
+ }
+
+ /* restore */
+ z->total_in += p - z->next_in;
+ z->next_in = p;
+ z->avail_in = n;
+ z->state->sub.marker = m;
+
+ /* return no joy or set up to restart on a new block */
+ if (m != 4)
+ return Z_DATA_ERROR;
+ r = z->total_in; w = z->total_out;
+ inflateReset(z);
+ z->total_in = r; z->total_out = w;
+ z->state->mode = BLOCKS;
+ return Z_OK;
+}
+
+
+/* Returns true if inflate is currently at the end of a block generated
+ * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH
+ * but removes the length bytes of the resulting empty stored block. When
+ * decompressing, PPP checks that at the end of input packet, inflate is
+ * waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(z)
+z_streamp z;
+{
+ if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL)
+ return Z_STREAM_ERROR;
+ return inflate_blocks_sync_point(z->state->blocks);
+}
--- /dev/null
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+
+#if !defined(BUILDFIXED) && !defined(STDC)
+# define BUILDFIXED /* non ANSI compilers may not accept inffixed.h */
+#endif
+
+const char inflate_copyright[] =
+ " inflate 1.1.4 Copyright 1995-2002 Mark Adler ";
+/*
+ If you use the zlib library in a product, an acknowledgment is welcome
+ in the documentation of your product. If for some reason you cannot
+ include such an acknowledgment, I would appreciate that you keep this
+ copyright string in the executable of your product.
+ */
+struct internal_state {int dummy;}; /* for buggy compilers */
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+
+local int huft_build OF((
+ uIntf *, /* code lengths in bits */
+ uInt, /* number of codes */
+ uInt, /* number of "simple" codes */
+ const uIntf *, /* list of base values for non-simple codes */
+ const uIntf *, /* list of extra bits for non-simple codes */
+ inflate_huft * FAR*,/* result: starting table */
+ uIntf *, /* maximum lookup bits (returns actual) */
+ inflate_huft *, /* space for trees */
+ uInt *, /* hufts used in space */
+ uIntf * )); /* space for values */
+
+/* Tables for deflate from PKZIP's appnote.txt. */
+local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+ 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+ /* see note #13 above about 258 */
+local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
+ 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
+local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+ 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+ 8193, 12289, 16385, 24577};
+local const uInt cpdext[30] = { /* Extra bits for distance codes */
+ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
+ 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
+ 12, 12, 13, 13};
+
+/*
+ Huffman code decoding is performed using a multi-level table lookup.
+ The fastest way to decode is to simply build a lookup table whose
+ size is determined by the longest code. However, the time it takes
+ to build this table can also be a factor if the data being decoded
+ is not very long. The most common codes are necessarily the
+ shortest codes, so those codes dominate the decoding time, and hence
+ the speed. The idea is you can have a shorter table that decodes the
+ shorter, more probable codes, and then point to subsidiary tables for
+ the longer codes. The time it costs to decode the longer codes is
+ then traded against the time it takes to make longer tables.
+
+ This results of this trade are in the variables lbits and dbits
+ below. lbits is the number of bits the first level table for literal/
+ length codes can decode in one step, and dbits is the same thing for
+ the distance codes. Subsequent tables are also less than or equal to
+ those sizes. These values may be adjusted either when all of the
+ codes are shorter than that, in which case the longest code length in
+ bits is used, or when the shortest code is *longer* than the requested
+ table size, in which case the length of the shortest code in bits is
+ used.
+
+ There are two different values for the two tables, since they code a
+ different number of possibilities each. The literal/length table
+ codes 286 possible values, or in a flat code, a little over eight
+ bits. The distance table codes 30 possible values, or a little less
+ than five bits, flat. The optimum values for speed end up being
+ about one bit more than those, so lbits is 8+1 and dbits is 5+1.
+ The optimum values may differ though from machine to machine, and
+ possibly even between compilers. Your mileage may vary.
+ */
+
+
+/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
+#define BMAX 15 /* maximum bit length of any code */
+
+local int huft_build(b, n, s, d, e, t, m, hp, hn, v)
+uIntf *b; /* code lengths in bits (all assumed <= BMAX) */
+uInt n; /* number of codes (assumed <= 288) */
+uInt s; /* number of simple-valued codes (0..s-1) */
+const uIntf *d; /* list of base values for non-simple codes */
+const uIntf *e; /* list of extra bits for non-simple codes */
+inflate_huft * FAR *t; /* result: starting table */
+uIntf *m; /* maximum lookup bits, returns actual */
+inflate_huft *hp; /* space for trees */
+uInt *hn; /* hufts used in space */
+uIntf *v; /* working area: values in order of bit length */
+/* Given a list of code lengths and a maximum table size, make a set of
+ tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR
+ if the given code set is incomplete (the tables are still built in this
+ case), or Z_DATA_ERROR if the input is invalid. */
+{
+
+ uInt a; /* counter for codes of length k */
+ uInt c[BMAX+1]; /* bit length count table */
+ uInt f; /* i repeats in table every f entries */
+ int g; /* maximum code length */
+ int h; /* table level */
+ register uInt i; /* counter, current code */
+ register uInt j; /* counter */
+ register int k; /* number of bits in current code */
+ int l; /* bits per table (returned in m) */
+ uInt mask; /* (1 << w) - 1, to avoid cc -O bug on HP */
+ register uIntf *p; /* pointer into c[], b[], or v[] */
+ inflate_huft *q; /* points to current table */
+ struct inflate_huft_s r; /* table entry for structure assignment */
+ inflate_huft *u[BMAX]; /* table stack */
+ register int w; /* bits before this table == (l * h) */
+ uInt x[BMAX+1]; /* bit offsets, then code stack */
+ uIntf *xp; /* pointer into x */
+ int y; /* number of dummy codes added */
+ uInt z; /* number of entries in current table */
+
+
+ /* Generate counts for each bit length */
+ p = c;
+#define C0 *p++ = 0;
+#define C2 C0 C0 C0 C0
+#define C4 C2 C2 C2 C2
+ C4 /* clear c[]--assume BMAX+1 is 16 */
+ p = b; i = n;
+ do {
+ c[*p++]++; /* assume all entries <= BMAX */
+ } while (--i);
+ if (c[0] == n) /* null input--all zero length codes */
+ {
+ *t = (inflate_huft *)Z_NULL;
+ *m = 0;
+ return Z_OK;
+ }
+
+
+ /* Find minimum and maximum length, bound *m by those */
+ l = *m;
+ for (j = 1; j <= BMAX; j++)
+ if (c[j])
+ break;
+ k = j; /* minimum code length */
+ if ((uInt)l < j)
+ l = j;
+ for (i = BMAX; i; i--)
+ if (c[i])
+ break;
+ g = i; /* maximum code length */
+ if ((uInt)l > i)
+ l = i;
+ *m = l;
+
+
+ /* Adjust last length count to fill out codes, if needed */
+ for (y = 1 << j; j < i; j++, y <<= 1)
+ if ((y -= c[j]) < 0)
+ return Z_DATA_ERROR;
+ if ((y -= c[i]) < 0)
+ return Z_DATA_ERROR;
+ c[i] += y;
+
+
+ /* Generate starting offsets into the value table for each length */
+ x[1] = j = 0;
+ p = c + 1; xp = x + 2;
+ while (--i) { /* note that i == g from above */
+ *xp++ = (j += *p++);
+ }
+
+
+ /* Make a table of values in order of bit lengths */
+ p = b; i = 0;
+ do {
+ if ((j = *p++) != 0)
+ v[x[j]++] = i;
+ } while (++i < n);
+ n = x[g]; /* set n to length of v */
+
+
+ /* Generate the Huffman codes and for each, make the table entries */
+ x[0] = i = 0; /* first Huffman code is zero */
+ p = v; /* grab values in bit order */
+ h = -1; /* no tables yet--level -1 */
+ w = -l; /* bits decoded == (l * h) */
+ u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */
+ q = (inflate_huft *)Z_NULL; /* ditto */
+ z = 0; /* ditto */
+
+ /* go through the bit lengths (k already is bits in shortest code) */
+ for (; k <= g; k++)
+ {
+ a = c[k];
+ while (a--)
+ {
+ /* here i is the Huffman code of length k bits for value *p */
+ /* make tables up to required level */
+ while (k > w + l)
+ {
+ h++;
+ w += l; /* previous table always l bits */
+
+ /* compute minimum size table less than or equal to l bits */
+ z = g - w;
+ z = z > (uInt)l ? l : z; /* table size upper limit */
+ if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */
+ { /* too few codes for k-w bit table */
+ f -= a + 1; /* deduct codes from patterns left */
+ xp = c + k;
+ if (j < z)
+ while (++j < z) /* try smaller tables up to z bits */
+ {
+ if ((f <<= 1) <= *++xp)
+ break; /* enough codes to use up j bits */
+ f -= *xp; /* else deduct codes from patterns */
+ }
+ }
+ z = 1 << j; /* table entries for j-bit table */
+
+ /* allocate new table */
+ if (*hn + z > MANY) /* (note: doesn't matter for fixed) */
+ return Z_DATA_ERROR; /* overflow of MANY */
+ u[h] = q = hp + *hn;
+ *hn += z;
+
+ /* connect to last table, if there is one */
+ if (h)
+ {
+ x[h] = i; /* save pattern for backing up */
+ r.bits = (Byte)l; /* bits to dump before this table */
+ r.exop = (Byte)j; /* bits in this table */
+ j = i >> (w - l);
+ r.base = (uInt)(q - u[h-1] - j); /* offset to this table */
+ u[h-1][j] = r; /* connect to last table */
+ }
+ else
+ *t = q; /* first table is returned result */
+ }
+
+ /* set up table entry in r */
+ r.bits = (Byte)(k - w);
+ if (p >= v + n)
+ r.exop = 128 + 64; /* out of values--invalid code */
+ else if (*p < s)
+ {
+ r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */
+ r.base = *p++; /* simple code is just the value */
+ }
+ else
+ {
+ r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
+ r.base = d[*p++ - s];
+ }
+
+ /* fill code-like entries with r */
+ f = 1 << (k - w);
+ for (j = i >> w; j < z; j += f)
+ q[j] = r;
+
+ /* backwards increment the k-bit code i */
+ for (j = 1 << (k - 1); i & j; j >>= 1)
+ i ^= j;
+ i ^= j;
+
+ /* backup over finished tables */
+ mask = (1 << w) - 1; /* needed on HP, cc -O bug */
+ while ((i & mask) != x[h])
+ {
+ h--; /* don't need to update q */
+ w -= l;
+ mask = (1 << w) - 1;
+ }
+ }
+ }
+
+
+ /* Return Z_BUF_ERROR if we were given an incomplete table */
+ return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
+}
+
+
+int inflate_trees_bits(c, bb, tb, hp, z)
+uIntf *c; /* 19 code lengths */
+uIntf *bb; /* bits tree desired/actual depth */
+inflate_huft * FAR *tb; /* bits tree result */
+inflate_huft *hp; /* space for trees */
+z_streamp z; /* for messages */
+{
+ int r;
+ uInt hn = 0; /* hufts used in space */
+ uIntf *v; /* work area for huft_build */
+
+ if ((v = (uIntf*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL)
+ return Z_MEM_ERROR;
+ r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL,
+ tb, bb, hp, &hn, v);
+ if (r == Z_DATA_ERROR)
+ z->msg = (char*)"oversubscribed dynamic bit lengths tree";
+ else if (r == Z_BUF_ERROR || *bb == 0)
+ {
+ z->msg = (char*)"incomplete dynamic bit lengths tree";
+ r = Z_DATA_ERROR;
+ }
+ ZFREE(z, v);
+ return r;
+}
+
+
+int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, hp, z)
+uInt nl; /* number of literal/length codes */
+uInt nd; /* number of distance codes */
+uIntf *c; /* that many (total) code lengths */
+uIntf *bl; /* literal desired/actual bit depth */
+uIntf *bd; /* distance desired/actual bit depth */
+inflate_huft * FAR *tl; /* literal/length tree result */
+inflate_huft * FAR *td; /* distance tree result */
+inflate_huft *hp; /* space for trees */
+z_streamp z; /* for messages */
+{
+ int r;
+ uInt hn = 0; /* hufts used in space */
+ uIntf *v; /* work area for huft_build */
+
+ /* allocate work area */
+ if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+ return Z_MEM_ERROR;
+
+ /* build literal/length tree */
+ r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);
+ if (r != Z_OK || *bl == 0)
+ {
+ if (r == Z_DATA_ERROR)
+ z->msg = (char*)"oversubscribed literal/length tree";
+ else if (r != Z_MEM_ERROR)
+ {
+ z->msg = (char*)"incomplete literal/length tree";
+ r = Z_DATA_ERROR;
+ }
+ ZFREE(z, v);
+ return r;
+ }
+
+ /* build distance tree */
+ r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);
+ if (r != Z_OK || (*bd == 0 && nl > 257))
+ {
+ if (r == Z_DATA_ERROR)
+ z->msg = (char*)"oversubscribed distance tree";
+ else if (r == Z_BUF_ERROR) {
+#ifdef PKZIP_BUG_WORKAROUND
+ r = Z_OK;
+ }
+#else
+ z->msg = (char*)"incomplete distance tree";
+ r = Z_DATA_ERROR;
+ }
+ else if (r != Z_MEM_ERROR)
+ {
+ z->msg = (char*)"empty distance tree with lengths";
+ r = Z_DATA_ERROR;
+ }
+ ZFREE(z, v);
+ return r;
+#endif
+ }
+
+ /* done */
+ ZFREE(z, v);
+ return Z_OK;
+}
+
+
+/* build fixed tables only once--keep them here */
+#ifdef BUILDFIXED
+local int fixed_built = 0;
+#define FIXEDH 544 /* number of hufts used by fixed tables */
+local inflate_huft fixed_mem[FIXEDH];
+local uInt fixed_bl;
+local uInt fixed_bd;
+local inflate_huft *fixed_tl;
+local inflate_huft *fixed_td;
+#else
+#include "inffixed.h"
+#endif
+
+
+int inflate_trees_fixed(bl, bd, tl, td, z)
+uIntf *bl; /* literal desired/actual bit depth */
+uIntf *bd; /* distance desired/actual bit depth */
+inflate_huft * FAR *tl; /* literal/length tree result */
+inflate_huft * FAR *td; /* distance tree result */
+z_streamp z; /* for memory allocation */
+{
+#ifdef BUILDFIXED
+ /* build fixed tables if not already */
+ if (!fixed_built)
+ {
+ int k; /* temporary variable */
+ uInt f = 0; /* number of hufts used in fixed_mem */
+ uIntf *c; /* length list for huft_build */
+ uIntf *v; /* work area for huft_build */
+
+ /* allocate memory */
+ if ((c = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+ return Z_MEM_ERROR;
+ if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+ {
+ ZFREE(z, c);
+ return Z_MEM_ERROR;
+ }
+
+ /* literal table */
+ for (k = 0; k < 144; k++)
+ c[k] = 8;
+ for (; k < 256; k++)
+ c[k] = 9;
+ for (; k < 280; k++)
+ c[k] = 7;
+ for (; k < 288; k++)
+ c[k] = 8;
+ fixed_bl = 9;
+ huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl,
+ fixed_mem, &f, v);
+
+ /* distance table */
+ for (k = 0; k < 30; k++)
+ c[k] = 5;
+ fixed_bd = 5;
+ huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd,
+ fixed_mem, &f, v);
+
+ /* done */
+ ZFREE(z, v);
+ ZFREE(z, c);
+ fixed_built = 1;
+ }
+#endif
+ *bl = fixed_bl;
+ *bd = fixed_bd;
+ *tl = fixed_tl;
+ *td = fixed_td;
+ return Z_OK;
+}
--- /dev/null
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* Huffman code lookup table entry--this entry is four bytes for machines
+ that have 16-bit pointers (e.g. PC's in the small or medium model). */
+
+typedef struct inflate_huft_s FAR inflate_huft;
+
+struct inflate_huft_s {
+ union {
+ struct {
+ Byte Exop; /* number of extra bits or operation */
+ Byte Bits; /* number of bits in this code or subcode */
+ } what;
+ uInt pad; /* pad structure to a power of 2 (4 bytes for */
+ } word; /* 16-bit, 8 bytes for 32-bit int's) */
+ uInt base; /* literal, length base, distance base,
+ or table offset */
+};
+
+/* Maximum size of dynamic tree. The maximum found in a long but non-
+ exhaustive search was 1004 huft structures (850 for length/literals
+ and 154 for distances, the latter actually the result of an
+ exhaustive search). The actual maximum is not known, but the
+ value below is more than safe. */
+#define MANY 1440
+
+extern int inflate_trees_bits OF((
+ uIntf *, /* 19 code lengths */
+ uIntf *, /* bits tree desired/actual depth */
+ inflate_huft * FAR *, /* bits tree result */
+ inflate_huft *, /* space for trees */
+ z_streamp)); /* for messages */
+
+extern int inflate_trees_dynamic OF((
+ uInt, /* number of literal/length codes */
+ uInt, /* number of distance codes */
+ uIntf *, /* that many (total) code lengths */
+ uIntf *, /* literal desired/actual bit depth */
+ uIntf *, /* distance desired/actual bit depth */
+ inflate_huft * FAR *, /* literal/length tree result */
+ inflate_huft * FAR *, /* distance tree result */
+ inflate_huft *, /* space for trees */
+ z_streamp)); /* for messages */
+
+extern int inflate_trees_fixed OF((
+ uIntf *, /* literal desired/actual bit depth */
+ uIntf *, /* distance desired/actual bit depth */
+ inflate_huft * FAR *, /* literal/length tree result */
+ inflate_huft * FAR *, /* distance tree result */
+ z_streamp)); /* for memory allocation */
--- /dev/null
+/* inflate_util.c -- data and routines common to blocks and codes
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "infblock.h"
+#include "inftrees.h"
+#include "infcodes.h"
+#include "infutil.h"
+
+struct inflate_codes_state {int dummy;}; /* for buggy compilers */
+
+/* And'ing with mask[n] masks the lower n bits */
+uInt inflate_mask[17] = {
+ 0x0000,
+ 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
+ 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
+};
+
+
+/* copy as much as possible from the sliding window to the output area */
+int inflate_flush(s, z, r)
+inflate_blocks_statef *s;
+z_streamp z;
+int r;
+{
+ uInt n;
+ Bytef *p;
+ Bytef *q;
+
+ /* local copies of source and destination pointers */
+ p = z->next_out;
+ q = s->read;
+
+ /* compute number of bytes to copy as far as end of window */
+ n = (uInt)((q <= s->write ? s->write : s->end) - q);
+ if (n > z->avail_out) n = z->avail_out;
+ if (n && r == Z_BUF_ERROR) r = Z_OK;
+
+ /* update counters */
+ z->avail_out -= n;
+ z->total_out += n;
+
+ /* update check information */
+ if (s->checkfn != Z_NULL)
+ z->adler = s->check = (*s->checkfn)(s->check, q, n);
+
+ /* copy as far as end of window */
+ zmemcpy(p, q, n);
+ p += n;
+ q += n;
+
+ /* see if more to copy at beginning of window */
+ if (q == s->end)
+ {
+ /* wrap pointers */
+ q = s->window;
+ if (s->write == s->end)
+ s->write = s->window;
+
+ /* compute bytes to copy */
+ n = (uInt)(s->write - q);
+ if (n > z->avail_out) n = z->avail_out;
+ if (n && r == Z_BUF_ERROR) r = Z_OK;
+
+ /* update counters */
+ z->avail_out -= n;
+ z->total_out += n;
+
+ /* update check information */
+ if (s->checkfn != Z_NULL)
+ z->adler = s->check = (*s->checkfn)(s->check, q, n);
+
+ /* copy */
+ zmemcpy(p, q, n);
+ p += n;
+ q += n;
+ }
+
+ /* update pointers */
+ z->next_out = p;
+ s->read = q;
+
+ /* done */
+ return r;
+}
--- /dev/null
+/* infutil.h -- types and macros common to blocks and codes
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+#ifndef _INFUTIL_H
+#define _INFUTIL_H
+
+typedef enum {
+ TYPE, /* get type bits (3, including end bit) */
+ LENS, /* get lengths for stored */
+ STORED, /* processing stored block */
+ TABLE, /* get table lengths */
+ BTREE, /* get bit lengths tree for a dynamic block */
+ DTREE, /* get length, distance trees for a dynamic block */
+ CODES, /* processing fixed or dynamic block */
+ DRY, /* output remaining window bytes */
+ DONE, /* finished last block, done */
+ BAD} /* got a data error--stuck here */
+inflate_block_mode;
+
+/* inflate blocks semi-private state */
+struct inflate_blocks_state {
+
+ /* mode */
+ inflate_block_mode mode; /* current inflate_block mode */
+
+ /* mode dependent information */
+ union {
+ uInt left; /* if STORED, bytes left to copy */
+ struct {
+ uInt table; /* table lengths (14 bits) */
+ uInt index; /* index into blens (or border) */
+ uIntf *blens; /* bit lengths of codes */
+ uInt bb; /* bit length tree depth */
+ inflate_huft *tb; /* bit length decoding tree */
+ } trees; /* if DTREE, decoding info for trees */
+ struct {
+ inflate_codes_statef
+ *codes;
+ } decode; /* if CODES, current state */
+ } sub; /* submode */
+ uInt last; /* true if this block is the last block */
+
+ /* mode independent information */
+ uInt bitk; /* bits in bit buffer */
+ uLong bitb; /* bit buffer */
+ inflate_huft *hufts; /* single malloc for tree space */
+ Bytef *window; /* sliding window */
+ Bytef *end; /* one byte after sliding window */
+ Bytef *read; /* window read pointer */
+ Bytef *write; /* window write pointer */
+ check_func checkfn; /* check function */
+ uLong check; /* check on output */
+
+};
+
+
+/* defines for inflate input/output */
+/* update pointers and return */
+#define UPDBITS {s->bitb=b;s->bitk=k;}
+#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
+#define UPDOUT {s->write=q;}
+#define UPDATE {UPDBITS UPDIN UPDOUT}
+#define LEAVE {UPDATE return inflate_flush(s,z,r);}
+/* get bytes and bits */
+#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
+#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
+#define NEXTBYTE (n--,*p++)
+#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
+#define DUMPBITS(j) {b>>=(j);k-=(j);}
+/* output bytes */
+#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
+#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
+#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
+#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
+#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
+#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
+/* load local pointers */
+#define LOAD {LOADIN LOADOUT}
+
+/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
+extern uInt inflate_mask[17];
+
+/* copy as much as possible from the sliding window to the output area */
+extern int inflate_flush OF((
+ inflate_blocks_statef *,
+ z_streamp ,
+ int));
+
+struct internal_state {int dummy;}; /* for buggy compilers */
+
+#endif
--- /dev/null
+/* maketree.c -- make inffixed.h table for decoding fixed codes
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* This program is included in the distribution for completeness.
+ You do not need to compile or run this program since inffixed.h
+ is already included in the distribution. To use this program
+ you need to compile zlib with BUILDFIXED defined and then compile
+ and link this program with the zlib library. Then the output of
+ this program can be piped to inffixed.h. */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "zutil.h"
+#include "inftrees.h"
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* generate initialization table for an inflate_huft structure array */
+void maketree(uInt b, inflate_huft *t)
+{
+ int i, e;
+
+ i = 0;
+ while (1)
+ {
+ e = t[i].exop;
+ if (e && (e & (16+64)) == 0) /* table pointer */
+ {
+ fprintf(stderr, "maketree: cannot initialize sub-tables!\n");
+ exit(1);
+ }
+ if (i % 4 == 0)
+ printf("\n ");
+ printf(" {{{%u,%u}},%u}", t[i].exop, t[i].bits, t[i].base);
+ if (++i == (1<<b))
+ break;
+ putchar(',');
+ }
+ puts("");
+}
+
+/* create the fixed tables in C initialization syntax */
+void main(void)
+{
+ int r;
+ uInt bl, bd;
+ inflate_huft *tl, *td;
+ z_stream z;
+
+ z.zalloc = zcalloc;
+ z.opaque = (voidpf)0;
+ z.zfree = zcfree;
+ r = inflate_trees_fixed(&bl, &bd, &tl, &td, &z);
+ if (r)
+ {
+ fprintf(stderr, "inflate_trees_fixed error %d\n", r);
+ return;
+ }
+ puts("/* inffixed.h -- table for decoding fixed codes");
+ puts(" * Generated automatically by the maketree.c program");
+ puts(" */");
+ puts("");
+ puts("/* WARNING: this file should *not* be used by applications. It is");
+ puts(" part of the implementation of the compression library and is");
+ puts(" subject to change. Applications should only use zlib.h.");
+ puts(" */");
+ puts("");
+ printf("local uInt fixed_bl = %d;\n", bl);
+ printf("local uInt fixed_bd = %d;\n", bd);
+ printf("local inflate_huft fixed_tl[] = {");
+ maketree(bl, tl);
+ puts(" };");
+ printf("local inflate_huft fixed_td[] = {");
+ maketree(bd, td);
+ puts(" };");
+}
--- /dev/null
+/* minigzip.c -- simulate gzip using the zlib compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * minigzip is a minimal implementation of the gzip utility. This is
+ * only an example of using zlib and isn't meant to replace the
+ * full-featured gzip. No attempt is made to deal with file systems
+ * limiting names to 14 or 8+3 characters, etc... Error checking is
+ * very limited. So use minigzip only for testing; use gzip for the
+ * real thing. On MSDOS, use only on file names without extension
+ * or in pipe mode.
+ */
+
+/* @(#) $Id$ */
+
+#include <stdio.h>
+#include "zlib.h"
+
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+#else
+ extern void exit OF((int));
+#endif
+
+#ifdef USE_MMAP
+# include <sys/types.h>
+# include <sys/mman.h>
+# include <sys/stat.h>
+#endif
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32)
+# include <fcntl.h>
+# include <io.h>
+# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+# define SET_BINARY_MODE(file)
+#endif
+
+#ifdef VMS
+# define unlink delete
+# define GZ_SUFFIX "-gz"
+#endif
+#ifdef RISCOS
+# define unlink remove
+# define GZ_SUFFIX "-gz"
+# define fileno(file) file->__file
+#endif
+#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+# include <unix.h> /* for fileno */
+#endif
+
+#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
+ extern int unlink OF((const char *));
+#endif
+
+#ifndef GZ_SUFFIX
+# define GZ_SUFFIX ".gz"
+#endif
+#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
+
+#define BUFLEN 16384
+#define MAX_NAME_LEN 1024
+
+#ifdef MAXSEG_64K
+# define local static
+ /* Needed for systems with limitation on stack size. */
+#else
+# define local
+#endif
+
+char *prog;
+
+void error OF((const char *msg));
+void gz_compress OF((FILE *in, gzFile out));
+#ifdef USE_MMAP
+int gz_compress_mmap OF((FILE *in, gzFile out));
+#endif
+void gz_uncompress OF((gzFile in, FILE *out));
+void file_compress OF((char *file, char *mode));
+void file_uncompress OF((char *file));
+int main OF((int argc, char *argv[]));
+
+/* ===========================================================================
+ * Display error message and exit
+ */
+void error(msg)
+ const char *msg;
+{
+ fprintf(stderr, "%s: %s\n", prog, msg);
+ exit(1);
+}
+
+/* ===========================================================================
+ * Compress input to output then close both files.
+ */
+
+void gz_compress(in, out)
+ FILE *in;
+ gzFile out;
+{
+ local char buf[BUFLEN];
+ int len;
+ int err;
+
+#ifdef USE_MMAP
+ /* Try first compressing with mmap. If mmap fails (minigzip used in a
+ * pipe), use the normal fread loop.
+ */
+ if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
+ for (;;) {
+ len = fread(buf, 1, sizeof(buf), in);
+ if (ferror(in)) {
+ perror("fread");
+ exit(1);
+ }
+ if (len == 0) break;
+
+ if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
+ }
+ fclose(in);
+ if (gzclose(out) != Z_OK) error("failed gzclose");
+}
+
+#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
+
+/* Try compressing the input file at once using mmap. Return Z_OK if
+ * if success, Z_ERRNO otherwise.
+ */
+int gz_compress_mmap(in, out)
+ FILE *in;
+ gzFile out;
+{
+ int len;
+ int err;
+ int ifd = fileno(in);
+ caddr_t buf; /* mmap'ed buffer for the entire input file */
+ off_t buf_len; /* length of the input file */
+ struct stat sb;
+
+ /* Determine the size of the file, needed for mmap: */
+ if (fstat(ifd, &sb) < 0) return Z_ERRNO;
+ buf_len = sb.st_size;
+ if (buf_len <= 0) return Z_ERRNO;
+
+ /* Now do the actual mmap: */
+ buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
+ if (buf == (caddr_t)(-1)) return Z_ERRNO;
+
+ /* Compress the whole file at once: */
+ len = gzwrite(out, (char *)buf, (unsigned)buf_len);
+
+ if (len != (int)buf_len) error(gzerror(out, &err));
+
+ munmap(buf, buf_len);
+ fclose(in);
+ if (gzclose(out) != Z_OK) error("failed gzclose");
+ return Z_OK;
+}
+#endif /* USE_MMAP */
+
+/* ===========================================================================
+ * Uncompress input to output then close both files.
+ */
+void gz_uncompress(in, out)
+ gzFile in;
+ FILE *out;
+{
+ local char buf[BUFLEN];
+ int len;
+ int err;
+
+ for (;;) {
+ len = gzread(in, buf, sizeof(buf));
+ if (len < 0) error (gzerror(in, &err));
+ if (len == 0) break;
+
+ if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
+ error("failed fwrite");
+ }
+ }
+ if (fclose(out)) error("failed fclose");
+
+ if (gzclose(in) != Z_OK) error("failed gzclose");
+}
+
+
+/* ===========================================================================
+ * Compress the given file: create a corresponding .gz file and remove the
+ * original.
+ */
+void file_compress(file, mode)
+ char *file;
+ char *mode;
+{
+ local char outfile[MAX_NAME_LEN];
+ FILE *in;
+ gzFile out;
+
+ strcpy(outfile, file);
+ strcat(outfile, GZ_SUFFIX);
+
+ in = fopen(file, "rb");
+ if (in == NULL) {
+ perror(file);
+ exit(1);
+ }
+ out = gzopen(outfile, mode);
+ if (out == NULL) {
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
+ exit(1);
+ }
+ gz_compress(in, out);
+
+ unlink(file);
+}
+
+
+/* ===========================================================================
+ * Uncompress the given file and remove the original.
+ */
+void file_uncompress(file)
+ char *file;
+{
+ local char buf[MAX_NAME_LEN];
+ char *infile, *outfile;
+ FILE *out;
+ gzFile in;
+ int len = strlen(file);
+
+ strcpy(buf, file);
+
+ if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
+ infile = file;
+ outfile = buf;
+ outfile[len-3] = '\0';
+ } else {
+ outfile = file;
+ infile = buf;
+ strcat(infile, GZ_SUFFIX);
+ }
+ in = gzopen(infile, "rb");
+ if (in == NULL) {
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
+ exit(1);
+ }
+ out = fopen(outfile, "wb");
+ if (out == NULL) {
+ perror(file);
+ exit(1);
+ }
+
+ gz_uncompress(in, out);
+
+ unlink(infile);
+}
+
+
+/* ===========================================================================
+ * Usage: minigzip [-d] [-f] [-h] [-1 to -9] [files...]
+ * -d : decompress
+ * -f : compress with Z_FILTERED
+ * -h : compress with Z_HUFFMAN_ONLY
+ * -1 to -9 : compression level
+ */
+
+int main(argc, argv)
+ int argc;
+ char *argv[];
+{
+ int uncompr = 0;
+ gzFile file;
+ char outmode[20];
+
+ strcpy(outmode, "wb6 ");
+
+ prog = argv[0];
+ argc--, argv++;
+
+ while (argc > 0) {
+ if (strcmp(*argv, "-d") == 0)
+ uncompr = 1;
+ else if (strcmp(*argv, "-f") == 0)
+ outmode[3] = 'f';
+ else if (strcmp(*argv, "-h") == 0)
+ outmode[3] = 'h';
+ else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
+ (*argv)[2] == 0)
+ outmode[2] = (*argv)[1];
+ else
+ break;
+ argc--, argv++;
+ }
+ if (argc == 0) {
+ SET_BINARY_MODE(stdin);
+ SET_BINARY_MODE(stdout);
+ if (uncompr) {
+ file = gzdopen(fileno(stdin), "rb");
+ if (file == NULL) error("can't gzdopen stdin");
+ gz_uncompress(file, stdout);
+ } else {
+ file = gzdopen(fileno(stdout), outmode);
+ if (file == NULL) error("can't gzdopen stdout");
+ gz_compress(stdin, file);
+ }
+ } else {
+ do {
+ if (uncompr) {
+ file_uncompress(*argv);
+ } else {
+ file_compress(*argv, outmode);
+ }
+ } while (argv++, --argc);
+ }
+ exit(0);
+ return 0; /* to avoid warning */
+}
--- /dev/null
+/* trees.c -- output deflated data using Huffman coding
+ * Copyright (C) 1995-2002 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * ALGORITHM
+ *
+ * The "deflation" process uses several Huffman trees. The more
+ * common source values are represented by shorter bit sequences.
+ *
+ * Each code tree is stored in a compressed form which is itself
+ * a Huffman encoding of the lengths of all the code strings (in
+ * ascending order by source values). The actual code strings are
+ * reconstructed from the lengths in the inflate process, as described
+ * in the deflate specification.
+ *
+ * REFERENCES
+ *
+ * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
+ * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
+ *
+ * Storer, James A.
+ * Data Compression: Methods and Theory, pp. 49-50.
+ * Computer Science Press, 1988. ISBN 0-7167-8156-5.
+ *
+ * Sedgewick, R.
+ * Algorithms, p290.
+ * Addison-Wesley, 1983. ISBN 0-201-06672-6.
+ */
+
+/* @(#) $Id$ */
+
+/* #define GEN_TREES_H */
+
+#include "deflate.h"
+
+#ifdef DEBUG
+# include <ctype.h>
+#endif
+
+/* ===========================================================================
+ * Constants
+ */
+
+#define MAX_BL_BITS 7
+/* Bit length codes must not exceed MAX_BL_BITS bits */
+
+#define END_BLOCK 256
+/* end of block literal code */
+
+#define REP_3_6 16
+/* repeat previous bit length 3-6 times (2 bits of repeat count) */
+
+#define REPZ_3_10 17
+/* repeat a zero length 3-10 times (3 bits of repeat count) */
+
+#define REPZ_11_138 18
+/* repeat a zero length 11-138 times (7 bits of repeat count) */
+
+local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
+ = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
+
+local const int extra_dbits[D_CODES] /* extra bits for each distance code */
+ = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
+
+local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
+ = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
+
+local const uch bl_order[BL_CODES]
+ = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
+/* The lengths of the bit length codes are sent in order of decreasing
+ * probability, to avoid transmitting the lengths for unused bit length codes.
+ */
+
+#define Buf_size (8 * 2*sizeof(char))
+/* Number of bits used within bi_buf. (bi_buf might be implemented on
+ * more than 16 bits on some systems.)
+ */
+
+/* ===========================================================================
+ * Local data. These are initialized only once.
+ */
+
+#define DIST_CODE_LEN 512 /* see definition of array dist_code below */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+/* non ANSI compilers may not accept trees.h */
+
+local ct_data static_ltree[L_CODES+2];
+/* The static literal tree. Since the bit lengths are imposed, there is no
+ * need for the L_CODES extra codes used during heap construction. However
+ * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
+ * below).
+ */
+
+local ct_data static_dtree[D_CODES];
+/* The static distance tree. (Actually a trivial tree since all codes use
+ * 5 bits.)
+ */
+
+uch _dist_code[DIST_CODE_LEN];
+/* Distance codes. The first 256 values correspond to the distances
+ * 3 .. 258, the last 256 values correspond to the top 8 bits of
+ * the 15 bit distances.
+ */
+
+uch _length_code[MAX_MATCH-MIN_MATCH+1];
+/* length code for each normalized match length (0 == MIN_MATCH) */
+
+local int base_length[LENGTH_CODES];
+/* First normalized length for each code (0 = MIN_MATCH) */
+
+local int base_dist[D_CODES];
+/* First normalized distance for each code (0 = distance of 1) */
+
+#else
+# include "trees.h"
+#endif /* GEN_TREES_H */
+
+struct static_tree_desc_s {
+ const ct_data *static_tree; /* static tree or NULL */
+ const intf *extra_bits; /* extra bits for each code or NULL */
+ int extra_base; /* base index for extra_bits */
+ int elems; /* max number of elements in the tree */
+ int max_length; /* max bit length for the codes */
+};
+
+local static_tree_desc static_l_desc =
+{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
+
+local static_tree_desc static_d_desc =
+{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS};
+
+local static_tree_desc static_bl_desc =
+{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS};
+
+/* ===========================================================================
+ * Local (static) routines in this file.
+ */
+
+local void tr_static_init OF((void));
+local void init_block OF((deflate_state *s));
+local void pqdownheap OF((deflate_state *s, ct_data *tree, int k));
+local void gen_bitlen OF((deflate_state *s, tree_desc *desc));
+local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count));
+local void build_tree OF((deflate_state *s, tree_desc *desc));
+local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code));
+local void send_tree OF((deflate_state *s, ct_data *tree, int max_code));
+local int build_bl_tree OF((deflate_state *s));
+local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
+ int blcodes));
+local void compress_block OF((deflate_state *s, ct_data *ltree,
+ ct_data *dtree));
+local void set_data_type OF((deflate_state *s));
+local unsigned bi_reverse OF((unsigned value, int length));
+local void bi_windup OF((deflate_state *s));
+local void bi_flush OF((deflate_state *s));
+local void copy_block OF((deflate_state *s, charf *buf, unsigned len,
+ int header));
+
+#ifdef GEN_TREES_H
+local void gen_trees_header OF((void));
+#endif
+
+#ifndef DEBUG
+# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
+ /* Send a code of the given tree. c and tree must not have side effects */
+
+#else /* DEBUG */
+# define send_code(s, c, tree) \
+ { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
+ send_bits(s, tree[c].Code, tree[c].Len); }
+#endif
+
+/* ===========================================================================
+ * Output a short LSB first on the stream.
+ * IN assertion: there is enough room in pendingBuf.
+ */
+#define put_short(s, w) { \
+ put_byte(s, (uch)((w) & 0xff)); \
+ put_byte(s, (uch)((ush)(w) >> 8)); \
+}
+
+/* ===========================================================================
+ * Send a value on a given number of bits.
+ * IN assertion: length <= 16 and value fits in length bits.
+ */
+#ifdef DEBUG
+local void send_bits OF((deflate_state *s, int value, int length));
+
+local void send_bits(s, value, length)
+ deflate_state *s;
+ int value; /* value to send */
+ int length; /* number of bits */
+{
+ Tracevv((stderr," l %2d v %4x ", length, value));
+ Assert(length > 0 && length <= 15, "invalid length");
+ s->bits_sent += (ulg)length;
+
+ /* If not enough room in bi_buf, use (valid) bits from bi_buf and
+ * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
+ * unused bits in value.
+ */
+ if (s->bi_valid > (int)Buf_size - length) {
+ s->bi_buf |= (value << s->bi_valid);
+ put_short(s, s->bi_buf);
+ s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
+ s->bi_valid += length - Buf_size;
+ } else {
+ s->bi_buf |= value << s->bi_valid;
+ s->bi_valid += length;
+ }
+}
+#else /* !DEBUG */
+
+#define send_bits(s, value, length) \
+{ int len = length;\
+ if (s->bi_valid > (int)Buf_size - len) {\
+ int val = value;\
+ s->bi_buf |= (val << s->bi_valid);\
+ put_short(s, s->bi_buf);\
+ s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
+ s->bi_valid += len - Buf_size;\
+ } else {\
+ s->bi_buf |= (value) << s->bi_valid;\
+ s->bi_valid += len;\
+ }\
+}
+#endif /* DEBUG */
+
+
+#define MAX(a,b) (a >= b ? a : b)
+/* the arguments must not have side effects */
+
+/* ===========================================================================
+ * Initialize the various 'constant' tables.
+ */
+local void tr_static_init()
+{
+#if defined(GEN_TREES_H) || !defined(STDC)
+ static int static_init_done = 0;
+ int n; /* iterates over tree elements */
+ int bits; /* bit counter */
+ int length; /* length value */
+ int code; /* code value */
+ int dist; /* distance index */
+ ush bl_count[MAX_BITS+1];
+ /* number of codes at each bit length for an optimal tree */
+
+ if (static_init_done) return;
+
+ /* For some embedded targets, global variables are not initialized: */
+ static_l_desc.static_tree = static_ltree;
+ static_l_desc.extra_bits = extra_lbits;
+ static_d_desc.static_tree = static_dtree;
+ static_d_desc.extra_bits = extra_dbits;
+ static_bl_desc.extra_bits = extra_blbits;
+
+ /* Initialize the mapping length (0..255) -> length code (0..28) */
+ length = 0;
+ for (code = 0; code < LENGTH_CODES-1; code++) {
+ base_length[code] = length;
+ for (n = 0; n < (1<<extra_lbits[code]); n++) {
+ _length_code[length++] = (uch)code;
+ }
+ }
+ Assert (length == 256, "tr_static_init: length != 256");
+ /* Note that the length 255 (match length 258) can be represented
+ * in two different ways: code 284 + 5 bits or code 285, so we
+ * overwrite length_code[255] to use the best encoding:
+ */
+ _length_code[length-1] = (uch)code;
+
+ /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
+ dist = 0;
+ for (code = 0 ; code < 16; code++) {
+ base_dist[code] = dist;
+ for (n = 0; n < (1<<extra_dbits[code]); n++) {
+ _dist_code[dist++] = (uch)code;
+ }
+ }
+ Assert (dist == 256, "tr_static_init: dist != 256");
+ dist >>= 7; /* from now on, all distances are divided by 128 */
+ for ( ; code < D_CODES; code++) {
+ base_dist[code] = dist << 7;
+ for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
+ _dist_code[256 + dist++] = (uch)code;
+ }
+ }
+ Assert (dist == 256, "tr_static_init: 256+dist != 512");
+
+ /* Construct the codes of the static literal tree */
+ for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
+ n = 0;
+ while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
+ while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
+ while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
+ while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
+ /* Codes 286 and 287 do not exist, but we must include them in the
+ * tree construction to get a canonical Huffman tree (longest code
+ * all ones)
+ */
+ gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
+
+ /* The static distance tree is trivial: */
+ for (n = 0; n < D_CODES; n++) {
+ static_dtree[n].Len = 5;
+ static_dtree[n].Code = bi_reverse((unsigned)n, 5);
+ }
+ static_init_done = 1;
+
+# ifdef GEN_TREES_H
+ gen_trees_header();
+# endif
+#endif /* defined(GEN_TREES_H) || !defined(STDC) */
+}
+
+/* ===========================================================================
+ * Genererate the file trees.h describing the static trees.
+ */
+#ifdef GEN_TREES_H
+# ifndef DEBUG
+# include <stdio.h>
+# endif
+
+# define SEPARATOR(i, last, width) \
+ ((i) == (last)? "\n};\n\n" : \
+ ((i) % (width) == (width)-1 ? ",\n" : ", "))
+
+void gen_trees_header()
+{
+ FILE *header = fopen("trees.h", "w");
+ int i;
+
+ Assert (header != NULL, "Can't open trees.h");
+ fprintf(header,
+ "/* header created automatically with -DGEN_TREES_H */\n\n");
+
+ fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
+ for (i = 0; i < L_CODES+2; i++) {
+ fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
+ static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
+ }
+
+ fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
+ for (i = 0; i < D_CODES; i++) {
+ fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
+ static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
+ }
+
+ fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
+ for (i = 0; i < DIST_CODE_LEN; i++) {
+ fprintf(header, "%2u%s", _dist_code[i],
+ SEPARATOR(i, DIST_CODE_LEN-1, 20));
+ }
+
+ fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+ for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
+ fprintf(header, "%2u%s", _length_code[i],
+ SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
+ }
+
+ fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
+ for (i = 0; i < LENGTH_CODES; i++) {
+ fprintf(header, "%1u%s", base_length[i],
+ SEPARATOR(i, LENGTH_CODES-1, 20));
+ }
+
+ fprintf(header, "local const int base_dist[D_CODES] = {\n");
+ for (i = 0; i < D_CODES; i++) {
+ fprintf(header, "%5u%s", base_dist[i],
+ SEPARATOR(i, D_CODES-1, 10));
+ }
+
+ fclose(header);
+}
+#endif /* GEN_TREES_H */
+
+/* ===========================================================================
+ * Initialize the tree data structures for a new zlib stream.
+ */
+void _tr_init(s)
+ deflate_state *s;
+{
+ tr_static_init();
+
+ s->l_desc.dyn_tree = s->dyn_ltree;
+ s->l_desc.stat_desc = &static_l_desc;
+
+ s->d_desc.dyn_tree = s->dyn_dtree;
+ s->d_desc.stat_desc = &static_d_desc;
+
+ s->bl_desc.dyn_tree = s->bl_tree;
+ s->bl_desc.stat_desc = &static_bl_desc;
+
+ s->bi_buf = 0;
+ s->bi_valid = 0;
+ s->last_eob_len = 8; /* enough lookahead for inflate */
+#ifdef DEBUG
+ s->compressed_len = 0L;
+ s->bits_sent = 0L;
+#endif
+
+ /* Initialize the first block of the first file: */
+ init_block(s);
+}
+
+/* ===========================================================================
+ * Initialize a new block.
+ */
+local void init_block(s)
+ deflate_state *s;
+{
+ int n; /* iterates over tree elements */
+
+ /* Initialize the trees. */
+ for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0;
+ for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0;
+ for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
+
+ s->dyn_ltree[END_BLOCK].Freq = 1;
+ s->opt_len = s->static_len = 0L;
+ s->last_lit = s->matches = 0;
+}
+
+#define SMALLEST 1
+/* Index within the heap array of least frequent node in the Huffman tree */
+
+
+/* ===========================================================================
+ * Remove the smallest element from the heap and recreate the heap with
+ * one less element. Updates heap and heap_len.
+ */
+#define pqremove(s, tree, top) \
+{\
+ top = s->heap[SMALLEST]; \
+ s->heap[SMALLEST] = s->heap[s->heap_len--]; \
+ pqdownheap(s, tree, SMALLEST); \
+}
+
+/* ===========================================================================
+ * Compares to subtrees, using the tree depth as tie breaker when
+ * the subtrees have equal frequency. This minimizes the worst case length.
+ */
+#define smaller(tree, n, m, depth) \
+ (tree[n].Freq < tree[m].Freq || \
+ (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
+
+/* ===========================================================================
+ * Restore the heap property by moving down the tree starting at node k,
+ * exchanging a node with the smallest of its two sons if necessary, stopping
+ * when the heap property is re-established (each father smaller than its
+ * two sons).
+ */
+local void pqdownheap(s, tree, k)
+ deflate_state *s;
+ ct_data *tree; /* the tree to restore */
+ int k; /* node to move down */
+{
+ int v = s->heap[k];
+ int j = k << 1; /* left son of k */
+ while (j <= s->heap_len) {
+ /* Set j to the smallest of the two sons: */
+ if (j < s->heap_len &&
+ smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
+ j++;
+ }
+ /* Exit if v is smaller than both sons */
+ if (smaller(tree, v, s->heap[j], s->depth)) break;
+
+ /* Exchange v with the smallest son */
+ s->heap[k] = s->heap[j]; k = j;
+
+ /* And continue down the tree, setting j to the left son of k */
+ j <<= 1;
+ }
+ s->heap[k] = v;
+}
+
+/* ===========================================================================
+ * Compute the optimal bit lengths for a tree and update the total bit length
+ * for the current block.
+ * IN assertion: the fields freq and dad are set, heap[heap_max] and
+ * above are the tree nodes sorted by increasing frequency.
+ * OUT assertions: the field len is set to the optimal bit length, the
+ * array bl_count contains the frequencies for each bit length.
+ * The length opt_len is updated; static_len is also updated if stree is
+ * not null.
+ */
+local void gen_bitlen(s, desc)
+ deflate_state *s;
+ tree_desc *desc; /* the tree descriptor */
+{
+ ct_data *tree = desc->dyn_tree;
+ int max_code = desc->max_code;
+ const ct_data *stree = desc->stat_desc->static_tree;
+ const intf *extra = desc->stat_desc->extra_bits;
+ int base = desc->stat_desc->extra_base;
+ int max_length = desc->stat_desc->max_length;
+ int h; /* heap index */
+ int n, m; /* iterate over the tree elements */
+ int bits; /* bit length */
+ int xbits; /* extra bits */
+ ush f; /* frequency */
+ int overflow = 0; /* number of elements with bit length too large */
+
+ for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
+
+ /* In a first pass, compute the optimal bit lengths (which may
+ * overflow in the case of the bit length tree).
+ */
+ tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
+
+ for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
+ n = s->heap[h];
+ bits = tree[tree[n].Dad].Len + 1;
+ if (bits > max_length) bits = max_length, overflow++;
+ tree[n].Len = (ush)bits;
+ /* We overwrite tree[n].Dad which is no longer needed */
+
+ if (n > max_code) continue; /* not a leaf node */
+
+ s->bl_count[bits]++;
+ xbits = 0;
+ if (n >= base) xbits = extra[n-base];
+ f = tree[n].Freq;
+ s->opt_len += (ulg)f * (bits + xbits);
+ if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
+ }
+ if (overflow == 0) return;
+
+ Trace((stderr,"\nbit length overflow\n"));
+ /* This happens for example on obj2 and pic of the Calgary corpus */
+
+ /* Find the first bit length which could increase: */
+ do {
+ bits = max_length-1;
+ while (s->bl_count[bits] == 0) bits--;
+ s->bl_count[bits]--; /* move one leaf down the tree */
+ s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
+ s->bl_count[max_length]--;
+ /* The brother of the overflow item also moves one step up,
+ * but this does not affect bl_count[max_length]
+ */
+ overflow -= 2;
+ } while (overflow > 0);
+
+ /* Now recompute all bit lengths, scanning in increasing frequency.
+ * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
+ * lengths instead of fixing only the wrong ones. This idea is taken
+ * from 'ar' written by Haruhiko Okumura.)
+ */
+ for (bits = max_length; bits != 0; bits--) {
+ n = s->bl_count[bits];
+ while (n != 0) {
+ m = s->heap[--h];
+ if (m > max_code) continue;
+ if (tree[m].Len != (unsigned) bits) {
+ Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
+ s->opt_len += ((long)bits - (long)tree[m].Len)
+ *(long)tree[m].Freq;
+ tree[m].Len = (ush)bits;
+ }
+ n--;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Generate the codes for a given tree and bit counts (which need not be
+ * optimal).
+ * IN assertion: the array bl_count contains the bit length statistics for
+ * the given tree and the field len is set for all tree elements.
+ * OUT assertion: the field code is set for all tree elements of non
+ * zero code length.
+ */
+local void gen_codes (tree, max_code, bl_count)
+ ct_data *tree; /* the tree to decorate */
+ int max_code; /* largest code with non zero frequency */
+ ushf *bl_count; /* number of codes at each bit length */
+{
+ ush next_code[MAX_BITS+1]; /* next code value for each bit length */
+ ush code = 0; /* running code value */
+ int bits; /* bit index */
+ int n; /* code index */
+
+ /* The distribution counts are first used to generate the code values
+ * without bit reversal.
+ */
+ for (bits = 1; bits <= MAX_BITS; bits++) {
+ next_code[bits] = code = (code + bl_count[bits-1]) << 1;
+ }
+ /* Check that the bit counts in bl_count are consistent. The last code
+ * must be all ones.
+ */
+ Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
+ "inconsistent bit counts");
+ Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
+
+ for (n = 0; n <= max_code; n++) {
+ int len = tree[n].Len;
+ if (len == 0) continue;
+ /* Now reverse the bits */
+ tree[n].Code = bi_reverse(next_code[len]++, len);
+
+ Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
+ n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
+ }
+}
+
+/* ===========================================================================
+ * Construct one Huffman tree and assigns the code bit strings and lengths.
+ * Update the total bit length for the current block.
+ * IN assertion: the field freq is set for all tree elements.
+ * OUT assertions: the fields len and code are set to the optimal bit length
+ * and corresponding code. The length opt_len is updated; static_len is
+ * also updated if stree is not null. The field max_code is set.
+ */
+local void build_tree(s, desc)
+ deflate_state *s;
+ tree_desc *desc; /* the tree descriptor */
+{
+ ct_data *tree = desc->dyn_tree;
+ const ct_data *stree = desc->stat_desc->static_tree;
+ int elems = desc->stat_desc->elems;
+ int n, m; /* iterate over heap elements */
+ int max_code = -1; /* largest code with non zero frequency */
+ int node; /* new node being created */
+
+ /* Construct the initial heap, with least frequent element in
+ * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+ * heap[0] is not used.
+ */
+ s->heap_len = 0, s->heap_max = HEAP_SIZE;
+
+ for (n = 0; n < elems; n++) {
+ if (tree[n].Freq != 0) {
+ s->heap[++(s->heap_len)] = max_code = n;
+ s->depth[n] = 0;
+ } else {
+ tree[n].Len = 0;
+ }
+ }
+
+ /* The pkzip format requires that at least one distance code exists,
+ * and that at least one bit should be sent even if there is only one
+ * possible code. So to avoid special checks later on we force at least
+ * two codes of non zero frequency.
+ */
+ while (s->heap_len < 2) {
+ node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
+ tree[node].Freq = 1;
+ s->depth[node] = 0;
+ s->opt_len--; if (stree) s->static_len -= stree[node].Len;
+ /* node is 0 or 1 so it does not have extra bits */
+ }
+ desc->max_code = max_code;
+
+ /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+ * establish sub-heaps of increasing lengths:
+ */
+ for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
+
+ /* Construct the Huffman tree by repeatedly combining the least two
+ * frequent nodes.
+ */
+ node = elems; /* next internal node of the tree */
+ do {
+ pqremove(s, tree, n); /* n = node of least frequency */
+ m = s->heap[SMALLEST]; /* m = node of next least frequency */
+
+ s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
+ s->heap[--(s->heap_max)] = m;
+
+ /* Create a new node father of n and m */
+ tree[node].Freq = tree[n].Freq + tree[m].Freq;
+ s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
+ tree[n].Dad = tree[m].Dad = (ush)node;
+#ifdef DUMP_BL_TREE
+ if (tree == s->bl_tree) {
+ fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
+ node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
+ }
+#endif
+ /* and insert the new node in the heap */
+ s->heap[SMALLEST] = node++;
+ pqdownheap(s, tree, SMALLEST);
+
+ } while (s->heap_len >= 2);
+
+ s->heap[--(s->heap_max)] = s->heap[SMALLEST];
+
+ /* At this point, the fields freq and dad are set. We can now
+ * generate the bit lengths.
+ */
+ gen_bitlen(s, (tree_desc *)desc);
+
+ /* The field len is now set, we can generate the bit codes */
+ gen_codes ((ct_data *)tree, max_code, s->bl_count);
+}
+
+/* ===========================================================================
+ * Scan a literal or distance tree to determine the frequencies of the codes
+ * in the bit length tree.
+ */
+local void scan_tree (s, tree, max_code)
+ deflate_state *s;
+ ct_data *tree; /* the tree to be scanned */
+ int max_code; /* and its largest code of non zero frequency */
+{
+ int n; /* iterates over all tree elements */
+ int prevlen = -1; /* last emitted length */
+ int curlen; /* length of current code */
+ int nextlen = tree[0].Len; /* length of next code */
+ int count = 0; /* repeat count of the current code */
+ int max_count = 7; /* max repeat count */
+ int min_count = 4; /* min repeat count */
+
+ if (nextlen == 0) max_count = 138, min_count = 3;
+ tree[max_code+1].Len = (ush)0xffff; /* guard */
+
+ for (n = 0; n <= max_code; n++) {
+ curlen = nextlen; nextlen = tree[n+1].Len;
+ if (++count < max_count && curlen == nextlen) {
+ continue;
+ } else if (count < min_count) {
+ s->bl_tree[curlen].Freq += count;
+ } else if (curlen != 0) {
+ if (curlen != prevlen) s->bl_tree[curlen].Freq++;
+ s->bl_tree[REP_3_6].Freq++;
+ } else if (count <= 10) {
+ s->bl_tree[REPZ_3_10].Freq++;
+ } else {
+ s->bl_tree[REPZ_11_138].Freq++;
+ }
+ count = 0; prevlen = curlen;
+ if (nextlen == 0) {
+ max_count = 138, min_count = 3;
+ } else if (curlen == nextlen) {
+ max_count = 6, min_count = 3;
+ } else {
+ max_count = 7, min_count = 4;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Send a literal or distance tree in compressed form, using the codes in
+ * bl_tree.
+ */
+local void send_tree (s, tree, max_code)
+ deflate_state *s;
+ ct_data *tree; /* the tree to be scanned */
+ int max_code; /* and its largest code of non zero frequency */
+{
+ int n; /* iterates over all tree elements */
+ int prevlen = -1; /* last emitted length */
+ int curlen; /* length of current code */
+ int nextlen = tree[0].Len; /* length of next code */
+ int count = 0; /* repeat count of the current code */
+ int max_count = 7; /* max repeat count */
+ int min_count = 4; /* min repeat count */
+
+ /* tree[max_code+1].Len = -1; */ /* guard already set */
+ if (nextlen == 0) max_count = 138, min_count = 3;
+
+ for (n = 0; n <= max_code; n++) {
+ curlen = nextlen; nextlen = tree[n+1].Len;
+ if (++count < max_count && curlen == nextlen) {
+ continue;
+ } else if (count < min_count) {
+ do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
+
+ } else if (curlen != 0) {
+ if (curlen != prevlen) {
+ send_code(s, curlen, s->bl_tree); count--;
+ }
+ Assert(count >= 3 && count <= 6, " 3_6?");
+ send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
+
+ } else if (count <= 10) {
+ send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
+
+ } else {
+ send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
+ }
+ count = 0; prevlen = curlen;
+ if (nextlen == 0) {
+ max_count = 138, min_count = 3;
+ } else if (curlen == nextlen) {
+ max_count = 6, min_count = 3;
+ } else {
+ max_count = 7, min_count = 4;
+ }
+ }
+}
+
+/* ===========================================================================
+ * Construct the Huffman tree for the bit lengths and return the index in
+ * bl_order of the last bit length code to send.
+ */
+local int build_bl_tree(s)
+ deflate_state *s;
+{
+ int max_blindex; /* index of last bit length code of non zero freq */
+
+ /* Determine the bit length frequencies for literal and distance trees */
+ scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
+ scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
+
+ /* Build the bit length tree: */
+ build_tree(s, (tree_desc *)(&(s->bl_desc)));
+ /* opt_len now includes the length of the tree representations, except
+ * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
+ */
+
+ /* Determine the number of bit length codes to send. The pkzip format
+ * requires that at least 4 bit length codes be sent. (appnote.txt says
+ * 3 but the actual value used is 4.)
+ */
+ for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
+ if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
+ }
+ /* Update opt_len to include the bit length tree and counts */
+ s->opt_len += 3*(max_blindex+1) + 5+5+4;
+ Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
+ s->opt_len, s->static_len));
+
+ return max_blindex;
+}
+
+/* ===========================================================================
+ * Send the header for a block using dynamic Huffman trees: the counts, the
+ * lengths of the bit length codes, the literal tree and the distance tree.
+ * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+ */
+local void send_all_trees(s, lcodes, dcodes, blcodes)
+ deflate_state *s;
+ int lcodes, dcodes, blcodes; /* number of codes for each tree */
+{
+ int rank; /* index in bl_order */
+
+ Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
+ Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
+ "too many codes");
+ Tracev((stderr, "\nbl counts: "));
+ send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
+ send_bits(s, dcodes-1, 5);
+ send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */
+ for (rank = 0; rank < blcodes; rank++) {
+ Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
+ send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
+ }
+ Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
+
+ send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
+ Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
+
+ send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
+ Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
+}
+
+/* ===========================================================================
+ * Send a stored block
+ */
+void _tr_stored_block(s, buf, stored_len, eof)
+ deflate_state *s;
+ charf *buf; /* input block */
+ ulg stored_len; /* length of input block */
+ int eof; /* true if this is the last block for a file */
+{
+ send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */
+#ifdef DEBUG
+ s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
+ s->compressed_len += (stored_len + 4) << 3;
+#endif
+ copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
+}
+
+/* ===========================================================================
+ * Send one empty static block to give enough lookahead for inflate.
+ * This takes 10 bits, of which 7 may remain in the bit buffer.
+ * The current inflate code requires 9 bits of lookahead. If the
+ * last two codes for the previous block (real code plus EOB) were coded
+ * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
+ * the last real code. In this case we send two empty static blocks instead
+ * of one. (There are no problems if the previous block is stored or fixed.)
+ * To simplify the code, we assume the worst case of last real code encoded
+ * on one bit only.
+ */
+void _tr_align(s)
+ deflate_state *s;
+{
+ send_bits(s, STATIC_TREES<<1, 3);
+ send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
+ s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
+#endif
+ bi_flush(s);
+ /* Of the 10 bits for the empty block, we have already sent
+ * (10 - bi_valid) bits. The lookahead for the last real code (before
+ * the EOB of the previous block) was thus at least one plus the length
+ * of the EOB plus what we have just sent of the empty static block.
+ */
+ if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
+ send_bits(s, STATIC_TREES<<1, 3);
+ send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
+ s->compressed_len += 10L;
+#endif
+ bi_flush(s);
+ }
+ s->last_eob_len = 7;
+}
+
+/* ===========================================================================
+ * Determine the best encoding for the current block: dynamic trees, static
+ * trees or store, and output the encoded block to the zip file.
+ */
+void _tr_flush_block(s, buf, stored_len, eof)
+ deflate_state *s;
+ charf *buf; /* input block, or NULL if too old */
+ ulg stored_len; /* length of input block */
+ int eof; /* true if this is the last block for a file */
+{
+ ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
+ int max_blindex = 0; /* index of last bit length code of non zero freq */
+
+ /* Build the Huffman trees unless a stored block is forced */
+ if (s->level > 0) {
+
+ /* Check if the file is ascii or binary */
+ if (s->data_type == Z_UNKNOWN) set_data_type(s);
+
+ /* Construct the literal and distance trees */
+ build_tree(s, (tree_desc *)(&(s->l_desc)));
+ Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
+ s->static_len));
+
+ build_tree(s, (tree_desc *)(&(s->d_desc)));
+ Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
+ s->static_len));
+ /* At this point, opt_len and static_len are the total bit lengths of
+ * the compressed block data, excluding the tree representations.
+ */
+
+ /* Build the bit length tree for the above two trees, and get the index
+ * in bl_order of the last bit length code to send.
+ */
+ max_blindex = build_bl_tree(s);
+
+ /* Determine the best encoding. Compute first the block length in bytes*/
+ opt_lenb = (s->opt_len+3+7)>>3;
+ static_lenb = (s->static_len+3+7)>>3;
+
+ Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
+ opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
+ s->last_lit));
+
+ if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
+
+ } else {
+ Assert(buf != (char*)0, "lost buf");
+ opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
+ }
+
+#ifdef FORCE_STORED
+ if (buf != (char*)0) { /* force stored block */
+#else
+ if (stored_len+4 <= opt_lenb && buf != (char*)0) {
+ /* 4: two words for the lengths */
+#endif
+ /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+ * Otherwise we can't have processed more than WSIZE input bytes since
+ * the last block flush, because compression would have been
+ * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+ * transform a block into a stored block.
+ */
+ _tr_stored_block(s, buf, stored_len, eof);
+
+#ifdef FORCE_STATIC
+ } else if (static_lenb >= 0) { /* force static trees */
+#else
+ } else if (static_lenb == opt_lenb) {
+#endif
+ send_bits(s, (STATIC_TREES<<1)+eof, 3);
+ compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
+#ifdef DEBUG
+ s->compressed_len += 3 + s->static_len;
+#endif
+ } else {
+ send_bits(s, (DYN_TREES<<1)+eof, 3);
+ send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
+ max_blindex+1);
+ compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
+#ifdef DEBUG
+ s->compressed_len += 3 + s->opt_len;
+#endif
+ }
+ Assert (s->compressed_len == s->bits_sent, "bad compressed size");
+ /* The above check is made mod 2^32, for files larger than 512 MB
+ * and uLong implemented on 32 bits.
+ */
+ init_block(s);
+
+ if (eof) {
+ bi_windup(s);
+#ifdef DEBUG
+ s->compressed_len += 7; /* align on byte boundary */
+#endif
+ }
+ Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
+ s->compressed_len-7*eof));
+}
+
+/* ===========================================================================
+ * Save the match info and tally the frequency counts. Return true if
+ * the current block must be flushed.
+ */
+int _tr_tally (s, dist, lc)
+ deflate_state *s;
+ unsigned dist; /* distance of matched string */
+ unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */
+{
+ s->d_buf[s->last_lit] = (ush)dist;
+ s->l_buf[s->last_lit++] = (uch)lc;
+ if (dist == 0) {
+ /* lc is the unmatched char */
+ s->dyn_ltree[lc].Freq++;
+ } else {
+ s->matches++;
+ /* Here, lc is the match length - MIN_MATCH */
+ dist--; /* dist = match distance - 1 */
+ Assert((ush)dist < (ush)MAX_DIST(s) &&
+ (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
+ (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match");
+
+ s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
+ s->dyn_dtree[d_code(dist)].Freq++;
+ }
+
+#ifdef TRUNCATE_BLOCK
+ /* Try to guess if it is profitable to stop the current block here */
+ if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
+ /* Compute an upper bound for the compressed length */
+ ulg out_length = (ulg)s->last_lit*8L;
+ ulg in_length = (ulg)((long)s->strstart - s->block_start);
+ int dcode;
+ for (dcode = 0; dcode < D_CODES; dcode++) {
+ out_length += (ulg)s->dyn_dtree[dcode].Freq *
+ (5L+extra_dbits[dcode]);
+ }
+ out_length >>= 3;
+ Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
+ s->last_lit, in_length, out_length,
+ 100L - out_length*100L/in_length));
+ if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
+ }
+#endif
+ return (s->last_lit == s->lit_bufsize-1);
+ /* We avoid equality with lit_bufsize because of wraparound at 64K
+ * on 16 bit machines and because stored blocks are restricted to
+ * 64K-1 bytes.
+ */
+}
+
+/* ===========================================================================
+ * Send the block data compressed using the given Huffman trees
+ */
+local void compress_block(s, ltree, dtree)
+ deflate_state *s;
+ ct_data *ltree; /* literal tree */
+ ct_data *dtree; /* distance tree */
+{
+ unsigned dist; /* distance of matched string */
+ int lc; /* match length or unmatched char (if dist == 0) */
+ unsigned lx = 0; /* running index in l_buf */
+ unsigned code; /* the code to send */
+ int extra; /* number of extra bits to send */
+
+ if (s->last_lit != 0) do {
+ dist = s->d_buf[lx];
+ lc = s->l_buf[lx++];
+ if (dist == 0) {
+ send_code(s, lc, ltree); /* send a literal byte */
+ Tracecv(isgraph(lc), (stderr," '%c' ", lc));
+ } else {
+ /* Here, lc is the match length - MIN_MATCH */
+ code = _length_code[lc];
+ send_code(s, code+LITERALS+1, ltree); /* send the length code */
+ extra = extra_lbits[code];
+ if (extra != 0) {
+ lc -= base_length[code];
+ send_bits(s, lc, extra); /* send the extra length bits */
+ }
+ dist--; /* dist is now the match distance - 1 */
+ code = d_code(dist);
+ Assert (code < D_CODES, "bad d_code");
+
+ send_code(s, code, dtree); /* send the distance code */
+ extra = extra_dbits[code];
+ if (extra != 0) {
+ dist -= base_dist[code];
+ send_bits(s, dist, extra); /* send the extra distance bits */
+ }
+ } /* literal or match pair ? */
+
+ /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
+ Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
+
+ } while (lx < s->last_lit);
+
+ send_code(s, END_BLOCK, ltree);
+ s->last_eob_len = ltree[END_BLOCK].Len;
+}
+
+/* ===========================================================================
+ * Set the data type to ASCII or BINARY, using a crude approximation:
+ * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
+ * IN assertion: the fields freq of dyn_ltree are set and the total of all
+ * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
+ */
+local void set_data_type(s)
+ deflate_state *s;
+{
+ int n = 0;
+ unsigned ascii_freq = 0;
+ unsigned bin_freq = 0;
+ while (n < 7) bin_freq += s->dyn_ltree[n++].Freq;
+ while (n < 128) ascii_freq += s->dyn_ltree[n++].Freq;
+ while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
+ s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII);
+}
+
+/* ===========================================================================
+ * Reverse the first len bits of a code, using straightforward code (a faster
+ * method would use a table)
+ * IN assertion: 1 <= len <= 15
+ */
+local unsigned bi_reverse(code, len)
+ unsigned code; /* the value to invert */
+ int len; /* its bit length */
+{
+ register unsigned res = 0;
+ do {
+ res |= code & 1;
+ code >>= 1, res <<= 1;
+ } while (--len > 0);
+ return res >> 1;
+}
+
+/* ===========================================================================
+ * Flush the bit buffer, keeping at most 7 bits in it.
+ */
+local void bi_flush(s)
+ deflate_state *s;
+{
+ if (s->bi_valid == 16) {
+ put_short(s, s->bi_buf);
+ s->bi_buf = 0;
+ s->bi_valid = 0;
+ } else if (s->bi_valid >= 8) {
+ put_byte(s, (Byte)s->bi_buf);
+ s->bi_buf >>= 8;
+ s->bi_valid -= 8;
+ }
+}
+
+/* ===========================================================================
+ * Flush the bit buffer and align the output on a byte boundary
+ */
+local void bi_windup(s)
+ deflate_state *s;
+{
+ if (s->bi_valid > 8) {
+ put_short(s, s->bi_buf);
+ } else if (s->bi_valid > 0) {
+ put_byte(s, (Byte)s->bi_buf);
+ }
+ s->bi_buf = 0;
+ s->bi_valid = 0;
+#ifdef DEBUG
+ s->bits_sent = (s->bits_sent+7) & ~7;
+#endif
+}
+
+/* ===========================================================================
+ * Copy a stored block, storing first the length and its
+ * one's complement if requested.
+ */
+local void copy_block(s, buf, len, header)
+ deflate_state *s;
+ charf *buf; /* the input data */
+ unsigned len; /* its length */
+ int header; /* true if block header must be written */
+{
+ bi_windup(s); /* align on byte boundary */
+ s->last_eob_len = 8; /* enough lookahead for inflate */
+
+ if (header) {
+ put_short(s, (ush)len);
+ put_short(s, (ush)~len);
+#ifdef DEBUG
+ s->bits_sent += 2*16;
+#endif
+ }
+#ifdef DEBUG
+ s->bits_sent += (ulg)len<<3;
+#endif
+ while (len--) {
+ put_byte(s, *buf++);
+ }
+}
--- /dev/null
+/* header created automatically with -DGEN_TREES_H */
+
+local const ct_data static_ltree[L_CODES+2] = {
+{{ 12},{ 8}}, {{140},{ 8}}, {{ 76},{ 8}}, {{204},{ 8}}, {{ 44},{ 8}},
+{{172},{ 8}}, {{108},{ 8}}, {{236},{ 8}}, {{ 28},{ 8}}, {{156},{ 8}},
+{{ 92},{ 8}}, {{220},{ 8}}, {{ 60},{ 8}}, {{188},{ 8}}, {{124},{ 8}},
+{{252},{ 8}}, {{ 2},{ 8}}, {{130},{ 8}}, {{ 66},{ 8}}, {{194},{ 8}},
+{{ 34},{ 8}}, {{162},{ 8}}, {{ 98},{ 8}}, {{226},{ 8}}, {{ 18},{ 8}},
+{{146},{ 8}}, {{ 82},{ 8}}, {{210},{ 8}}, {{ 50},{ 8}}, {{178},{ 8}},
+{{114},{ 8}}, {{242},{ 8}}, {{ 10},{ 8}}, {{138},{ 8}}, {{ 74},{ 8}},
+{{202},{ 8}}, {{ 42},{ 8}}, {{170},{ 8}}, {{106},{ 8}}, {{234},{ 8}},
+{{ 26},{ 8}}, {{154},{ 8}}, {{ 90},{ 8}}, {{218},{ 8}}, {{ 58},{ 8}},
+{{186},{ 8}}, {{122},{ 8}}, {{250},{ 8}}, {{ 6},{ 8}}, {{134},{ 8}},
+{{ 70},{ 8}}, {{198},{ 8}}, {{ 38},{ 8}}, {{166},{ 8}}, {{102},{ 8}},
+{{230},{ 8}}, {{ 22},{ 8}}, {{150},{ 8}}, {{ 86},{ 8}}, {{214},{ 8}},
+{{ 54},{ 8}}, {{182},{ 8}}, {{118},{ 8}}, {{246},{ 8}}, {{ 14},{ 8}},
+{{142},{ 8}}, {{ 78},{ 8}}, {{206},{ 8}}, {{ 46},{ 8}}, {{174},{ 8}},
+{{110},{ 8}}, {{238},{ 8}}, {{ 30},{ 8}}, {{158},{ 8}}, {{ 94},{ 8}},
+{{222},{ 8}}, {{ 62},{ 8}}, {{190},{ 8}}, {{126},{ 8}}, {{254},{ 8}},
+{{ 1},{ 8}}, {{129},{ 8}}, {{ 65},{ 8}}, {{193},{ 8}}, {{ 33},{ 8}},
+{{161},{ 8}}, {{ 97},{ 8}}, {{225},{ 8}}, {{ 17},{ 8}}, {{145},{ 8}},
+{{ 81},{ 8}}, {{209},{ 8}}, {{ 49},{ 8}}, {{177},{ 8}}, {{113},{ 8}},
+{{241},{ 8}}, {{ 9},{ 8}}, {{137},{ 8}}, {{ 73},{ 8}}, {{201},{ 8}},
+{{ 41},{ 8}}, {{169},{ 8}}, {{105},{ 8}}, {{233},{ 8}}, {{ 25},{ 8}},
+{{153},{ 8}}, {{ 89},{ 8}}, {{217},{ 8}}, {{ 57},{ 8}}, {{185},{ 8}},
+{{121},{ 8}}, {{249},{ 8}}, {{ 5},{ 8}}, {{133},{ 8}}, {{ 69},{ 8}},
+{{197},{ 8}}, {{ 37},{ 8}}, {{165},{ 8}}, {{101},{ 8}}, {{229},{ 8}},
+{{ 21},{ 8}}, {{149},{ 8}}, {{ 85},{ 8}}, {{213},{ 8}}, {{ 53},{ 8}},
+{{181},{ 8}}, {{117},{ 8}}, {{245},{ 8}}, {{ 13},{ 8}}, {{141},{ 8}},
+{{ 77},{ 8}}, {{205},{ 8}}, {{ 45},{ 8}}, {{173},{ 8}}, {{109},{ 8}},
+{{237},{ 8}}, {{ 29},{ 8}}, {{157},{ 8}}, {{ 93},{ 8}}, {{221},{ 8}},
+{{ 61},{ 8}}, {{189},{ 8}}, {{125},{ 8}}, {{253},{ 8}}, {{ 19},{ 9}},
+{{275},{ 9}}, {{147},{ 9}}, {{403},{ 9}}, {{ 83},{ 9}}, {{339},{ 9}},
+{{211},{ 9}}, {{467},{ 9}}, {{ 51},{ 9}}, {{307},{ 9}}, {{179},{ 9}},
+{{435},{ 9}}, {{115},{ 9}}, {{371},{ 9}}, {{243},{ 9}}, {{499},{ 9}},
+{{ 11},{ 9}}, {{267},{ 9}}, {{139},{ 9}}, {{395},{ 9}}, {{ 75},{ 9}},
+{{331},{ 9}}, {{203},{ 9}}, {{459},{ 9}}, {{ 43},{ 9}}, {{299},{ 9}},
+{{171},{ 9}}, {{427},{ 9}}, {{107},{ 9}}, {{363},{ 9}}, {{235},{ 9}},
+{{491},{ 9}}, {{ 27},{ 9}}, {{283},{ 9}}, {{155},{ 9}}, {{411},{ 9}},
+{{ 91},{ 9}}, {{347},{ 9}}, {{219},{ 9}}, {{475},{ 9}}, {{ 59},{ 9}},
+{{315},{ 9}}, {{187},{ 9}}, {{443},{ 9}}, {{123},{ 9}}, {{379},{ 9}},
+{{251},{ 9}}, {{507},{ 9}}, {{ 7},{ 9}}, {{263},{ 9}}, {{135},{ 9}},
+{{391},{ 9}}, {{ 71},{ 9}}, {{327},{ 9}}, {{199},{ 9}}, {{455},{ 9}},
+{{ 39},{ 9}}, {{295},{ 9}}, {{167},{ 9}}, {{423},{ 9}}, {{103},{ 9}},
+{{359},{ 9}}, {{231},{ 9}}, {{487},{ 9}}, {{ 23},{ 9}}, {{279},{ 9}},
+{{151},{ 9}}, {{407},{ 9}}, {{ 87},{ 9}}, {{343},{ 9}}, {{215},{ 9}},
+{{471},{ 9}}, {{ 55},{ 9}}, {{311},{ 9}}, {{183},{ 9}}, {{439},{ 9}},
+{{119},{ 9}}, {{375},{ 9}}, {{247},{ 9}}, {{503},{ 9}}, {{ 15},{ 9}},
+{{271},{ 9}}, {{143},{ 9}}, {{399},{ 9}}, {{ 79},{ 9}}, {{335},{ 9}},
+{{207},{ 9}}, {{463},{ 9}}, {{ 47},{ 9}}, {{303},{ 9}}, {{175},{ 9}},
+{{431},{ 9}}, {{111},{ 9}}, {{367},{ 9}}, {{239},{ 9}}, {{495},{ 9}},
+{{ 31},{ 9}}, {{287},{ 9}}, {{159},{ 9}}, {{415},{ 9}}, {{ 95},{ 9}},
+{{351},{ 9}}, {{223},{ 9}}, {{479},{ 9}}, {{ 63},{ 9}}, {{319},{ 9}},
+{{191},{ 9}}, {{447},{ 9}}, {{127},{ 9}}, {{383},{ 9}}, {{255},{ 9}},
+{{511},{ 9}}, {{ 0},{ 7}}, {{ 64},{ 7}}, {{ 32},{ 7}}, {{ 96},{ 7}},
+{{ 16},{ 7}}, {{ 80},{ 7}}, {{ 48},{ 7}}, {{112},{ 7}}, {{ 8},{ 7}},
+{{ 72},{ 7}}, {{ 40},{ 7}}, {{104},{ 7}}, {{ 24},{ 7}}, {{ 88},{ 7}},
+{{ 56},{ 7}}, {{120},{ 7}}, {{ 4},{ 7}}, {{ 68},{ 7}}, {{ 36},{ 7}},
+{{100},{ 7}}, {{ 20},{ 7}}, {{ 84},{ 7}}, {{ 52},{ 7}}, {{116},{ 7}},
+{{ 3},{ 8}}, {{131},{ 8}}, {{ 67},{ 8}}, {{195},{ 8}}, {{ 35},{ 8}},
+{{163},{ 8}}, {{ 99},{ 8}}, {{227},{ 8}}
+};
+
+local const ct_data static_dtree[D_CODES] = {
+{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
+{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
+{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
+{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
+{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
+{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
+};
+
+const uch _dist_code[DIST_CODE_LEN] = {
+ 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8,
+ 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10,
+10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
+11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 0, 0, 16, 17,
+18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
+};
+
+const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12,
+13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
+17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
+19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
+22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
+};
+
+local const int base_length[LENGTH_CODES] = {
+0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
+64, 80, 96, 112, 128, 160, 192, 224, 0
+};
+
+local const int base_dist[D_CODES] = {
+ 0, 1, 2, 3, 4, 6, 8, 12, 16, 24,
+ 32, 48, 64, 96, 128, 192, 256, 384, 512, 768,
+ 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576
+};
+
--- /dev/null
+/* uncompr.c -- decompress a memory buffer
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zlib.h"
+
+/* ===========================================================================
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be large enough to hold the
+ entire uncompressed data. (The size of the uncompressed data must have
+ been saved previously by the compressor and transmitted to the decompressor
+ by some mechanism outside the scope of this compression library.)
+ Upon exit, destLen is the actual size of the compressed buffer.
+ This function can be used to decompress a whole file at once if the
+ input file is mmap'ed.
+
+ uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer, or Z_DATA_ERROR if the input data was corrupted.
+*/
+int ZEXPORT uncompress (dest, destLen, source, sourceLen)
+ Bytef *dest;
+ uLongf *destLen;
+ const Bytef *source;
+ uLong sourceLen;
+{
+ z_stream stream;
+ int err;
+
+ stream.next_in = (Bytef*)source;
+ stream.avail_in = (uInt)sourceLen;
+ /* Check for source > 64K on 16-bit machine: */
+ if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
+
+ stream.next_out = dest;
+ stream.avail_out = (uInt)*destLen;
+ if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
+
+ stream.zalloc = (alloc_func)0;
+ stream.zfree = (free_func)0;
+
+ err = inflateInit(&stream);
+ if (err != Z_OK) return err;
+
+ err = inflate(&stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ inflateEnd(&stream);
+ return err == Z_OK ? Z_BUF_ERROR : err;
+ }
+ *destLen = stream.total_out;
+
+ err = inflateEnd(&stream);
+ return err;
+}
--- /dev/null
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#ifndef _ZCONF_H
+#define _ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ */
+#ifdef Z_PREFIX
+# define deflateInit_ z_deflateInit_
+# define deflate z_deflate
+# define deflateEnd z_deflateEnd
+# define inflateInit_ z_inflateInit_
+# define inflate z_inflate
+# define inflateEnd z_inflateEnd
+# define deflateInit2_ z_deflateInit2_
+# define deflateSetDictionary z_deflateSetDictionary
+# define deflateCopy z_deflateCopy
+# define deflateReset z_deflateReset
+# define deflateParams z_deflateParams
+# define inflateInit2_ z_inflateInit2_
+# define inflateSetDictionary z_inflateSetDictionary
+# define inflateSync z_inflateSync
+# define inflateSyncPoint z_inflateSyncPoint
+# define inflateReset z_inflateReset
+# define compress z_compress
+# define compress2 z_compress2
+# define uncompress z_uncompress
+# define adler32 z_adler32
+# define crc32 z_crc32
+# define get_crc_table z_get_crc_table
+
+# define Byte z_Byte
+# define uInt z_uInt
+# define uLong z_uLong
+# define Bytef z_Bytef
+# define charf z_charf
+# define intf z_intf
+# define uIntf z_uIntf
+# define uLongf z_uLongf
+# define voidpf z_voidpf
+# define voidp z_voidp
+#endif
+
+#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
+# define WIN32
+#endif
+#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
+# ifndef __32BIT__
+# define __32BIT__
+# endif
+#endif
+#if defined(__MSDOS__) && !defined(MSDOS)
+# define MSDOS
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#if defined(MSDOS) && !defined(__32BIT__)
+# define MAXSEG_64K
+#endif
+#ifdef MSDOS
+# define UNALIGNED_OK
+#endif
+
+#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32)) && !defined(STDC)
+# define STDC
+#endif
+#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__)
+# ifndef STDC
+# define STDC
+# endif
+#endif
+
+#ifndef STDC
+# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+# define const
+# endif
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
+# define NO_DUMMY_DECL
+#endif
+
+/* Old Borland C incorrectly complains about missing returns: */
+#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
+# define NEED_DUMMY_RETURN
+#endif
+
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+# ifdef MAXSEG_64K
+# define MAX_MEM_LEVEL 8
+# else
+# define MAX_MEM_LEVEL 9
+# endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+# define MAX_WBITS 15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+ (1 << (windowBits+2)) + (1 << (memLevel+9))
+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+ The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+ /* Type declarations */
+
+#ifndef OF /* function prototypes */
+# ifdef STDC
+# define OF(args) args
+# else
+# define OF(args) ()
+# endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
+ /* MSC small or medium model */
+# define SMALL_MEDIUM
+# ifdef _MSC_VER
+# define FAR _far
+# else
+# define FAR far
+# endif
+#endif
+#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
+# ifndef __32BIT__
+# define SMALL_MEDIUM
+# define FAR _far
+# endif
+#endif
+
+/* Compile with -DZLIB_DLL for Windows DLL support */
+#if defined(ZLIB_DLL)
+# if defined(_WINDOWS) || defined(WINDOWS)
+# ifdef FAR
+# undef FAR
+# endif
+# include <windows.h>
+# define ZEXPORT WINAPI
+# ifdef WIN32
+# define ZEXPORTVA WINAPIV
+# else
+# define ZEXPORTVA FAR _cdecl _export
+# endif
+# endif
+# if defined (__BORLANDC__)
+# if (__BORLANDC__ >= 0x0500) && defined (WIN32)
+# include <windows.h>
+# define ZEXPORT __declspec(dllexport) WINAPI
+# define ZEXPORTRVA __declspec(dllexport) WINAPIV
+# else
+# if defined (_Windows) && defined (__DLL__)
+# define ZEXPORT _export
+# define ZEXPORTVA _export
+# endif
+# endif
+# endif
+#endif
+
+#if defined (__BEOS__)
+# if defined (ZLIB_DLL)
+# define ZEXTERN extern __declspec(dllexport)
+# else
+# define ZEXTERN extern __declspec(dllimport)
+# endif
+#endif
+
+#ifndef ZEXPORT
+# define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+# define ZEXPORTVA
+#endif
+#ifndef ZEXTERN
+# define ZEXTERN extern
+#endif
+
+#ifndef FAR
+# define FAR
+#endif
+
+#if !defined(MACOS) && !defined(TARGET_OS_MAC)
+typedef unsigned char Byte; /* 8 bits */
+#endif
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+ /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+# define Bytef Byte FAR
+#else
+ typedef Byte FAR Bytef;
+#endif
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+ typedef void FAR *voidpf;
+ typedef void *voidp;
+#else
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+#ifdef HAVE_UNISTD_H
+# include <sys/types.h> /* for off_t */
+# include <unistd.h> /* for SEEK_* and off_t */
+# define z_off_t off_t
+#endif
+#ifndef SEEK_SET
+# define SEEK_SET 0 /* Seek from beginning of file. */
+# define SEEK_CUR 1 /* Seek from current position. */
+# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
+#endif
+#ifndef z_off_t
+# define z_off_t long
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+# pragma map(deflateInit_,"DEIN")
+# pragma map(deflateInit2_,"DEIN2")
+# pragma map(deflateEnd,"DEEND")
+# pragma map(inflateInit_,"ININ")
+# pragma map(inflateInit2_,"ININ2")
+# pragma map(inflateEnd,"INEND")
+# pragma map(inflateSync,"INSY")
+# pragma map(inflateSetDictionary,"INSEDI")
+# pragma map(inflate_blocks,"INBL")
+# pragma map(inflate_blocks_new,"INBLNE")
+# pragma map(inflate_blocks_free,"INBLFR")
+# pragma map(inflate_blocks_reset,"INBLRE")
+# pragma map(inflate_codes_free,"INCOFR")
+# pragma map(inflate_codes,"INCO")
+# pragma map(inflate_fast,"INFA")
+# pragma map(inflate_flush,"INFLU")
+# pragma map(inflate_mask,"INMA")
+# pragma map(inflate_set_dictionary,"INSEDI2")
+# pragma map(inflate_copyright,"INCOPY")
+# pragma map(inflate_trees_bits,"INTRBI")
+# pragma map(inflate_trees_dynamic,"INTRDY")
+# pragma map(inflate_trees_fixed,"INTRFI")
+# pragma map(inflate_trees_free,"INTRFR")
+#endif
+
+#endif /* _ZCONF_H */
--- /dev/null
+.TH ZLIB 3 "11 March 2002"
+.SH NAME
+zlib \- compression/decompression library
+.SH SYNOPSIS
+[see
+.I zlib.h
+for full description]
+.SH DESCRIPTION
+The
+.I zlib
+library is a general purpose data compression library.
+The code is thread safe.
+It provides in-memory compression and decompression functions,
+including integrity checks of the uncompressed data.
+This version of the library supports only one compression method (deflation)
+but other algorithms will be added later and will have the same stream interface.
+.LP
+Compression can be done in a single step if the buffers are large enough
+(for example if an input file is mmap'ed),
+or can be done by repeated calls of the compression function.
+In the latter case,
+the application must provide more input and/or consume the output
+(providing more output space) before each call.
+.LP
+The library also supports reading and writing files in
+.I gzip
+(.gz) format
+with an interface similar to that of stdio.
+.LP
+The library does not install any signal handler. The decoder checks
+the consistency of the compressed data, so the library should never
+crash even in case of corrupted input.
+.LP
+All functions of the compression library are documented in the file
+.IR zlib.h.
+The distribution source includes examples of use of the library
+the files
+.I example.c
+and
+.IR minigzip.c .
+.LP
+A Java implementation of
+.IR zlib
+is available in the Java Development Kit 1.1
+.IP
+http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+.LP
+A Perl interface to
+.IR zlib ,
+written by Paul Marquess (pmarquess@bfsec.bt.co.uk)
+is available at CPAN (Comprehensive Perl Archive Network) sites,
+such as:
+.IP
+ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
+.LP
+A Python interface to
+.IR zlib
+written by A.M. Kuchling <amk@magnet.com>
+is available from the Python Software Association sites, such as:
+.IP
+ftp://ftp.python.org/pub/python/contrib/Encoding/zlib*.tar.gz
+.SH "SEE ALSO"
+Questions about zlib should be sent to:
+.IP
+zlib@quest.jpl.nasa.gov
+or, if this fails, to the author addresses given below.
+The zlib home page is:
+.IP
+http://www.cdrom.com/pub/infozip/zlib/
+.LP
+The data format used by the zlib library is described by RFC
+(Request for Comments) 1950 to 1952 in the files:
+.IP
+ftp://ds.internic.net/rfc/rfc1950.txt (zlib format)
+.br
+rfc1951.txt (deflate format)
+.br
+rfc1952.txt (gzip format)
+.LP
+These documents are also available in other formats from:
+.IP
+ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+.SH AUTHORS
+Version 1.1.4
+Copyright (C) 1995-2002 Jean-loup Gailly (jloup@gzip.org)
+and Mark Adler (madler@alumni.caltech.edu).
+.LP
+This software is provided "as-is,"
+without any express or implied warranty.
+In no event will the authors be held liable for any damages
+arising from the use of this software.
+See the distribution directory with respect to requirements
+governing redistribution.
+The deflate format used by
+.I zlib
+was defined by Phil Katz.
+The deflate and
+.I zlib
+specifications were written by L. Peter Deutsch.
+Thanks to all the people who reported problems and suggested various
+improvements in
+.IR zlib ;
+who are too numerous to cite here.
+.LP
+UNIX manual page by R. P. C. Rodgers,
+U.S. National Library of Medicine (rodgers@nlm.nih.gov).
+.\" end of man page
--- /dev/null
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+ version 1.1.4, March 11th, 2002
+
+ Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ jloup@gzip.org madler@alumni.caltech.edu
+
+
+ The data format used by the zlib library is described by RFCs (Request for
+ Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
+ (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.1.4"
+
+/*
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed
+ data. This version of the library supports only one compression method
+ (deflation) but other algorithms will be added later and will have the same
+ stream interface.
+
+ Compression can be done in a single step if the buffers are large
+ enough (for example if an input file is mmap'ed), or can be done by
+ repeated calls of the compression function. In the latter case, the
+ application must provide more input and/or consume the output
+ (providing more output space) before each call.
+
+ The library also supports reading and writing files in gzip (.gz) format
+ with an interface similar to that of stdio.
+
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never
+ crash even in case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void (*free_func) OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+ Bytef *next_in; /* next input byte */
+ uInt avail_in; /* number of bytes available at next_in */
+ uLong total_in; /* total nb of input bytes read so far */
+
+ Bytef *next_out; /* next output byte should be put there */
+ uInt avail_out; /* remaining free space at next_out */
+ uLong total_out; /* total nb of bytes output so far */
+
+ char *msg; /* last error message, NULL if no error */
+ struct internal_state FAR *state; /* not visible by applications */
+
+ alloc_func zalloc; /* used to allocate the internal state */
+ free_func zfree; /* used to free the internal state */
+ voidpf opaque; /* private data object passed to zalloc and zfree */
+
+ int data_type; /* best guess about the data type: ascii or binary */
+ uLong adler; /* adler32 value of the uncompressed data */
+ uLong reserved; /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+ The application must update next_in and avail_in when avail_in has
+ dropped to zero. It must update next_out and avail_out when avail_out
+ has dropped to zero. The application must initialize zalloc, zfree and
+ opaque before calling the init function. All other fields are set by the
+ compression library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ opaque value.
+
+ zalloc must return Z_NULL if there is not enough memory for the object.
+ If zlib is used in a multi-threaded application, zalloc and zfree must be
+ thread safe.
+
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this
+ if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+ pointers returned by zalloc for objects of exactly 65536 bytes *must*
+ have their offset normalized to zero. The default allocation function
+ provided by this library ensures this (see zutil.c). To reduce memory
+ requirements and avoid any allocation of 64K objects, at the expense of
+ compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or
+ progress reports. After compression, total_in holds the total size of
+ the uncompressed data and may be saved for use in the decompressor
+ (particularly if the decompressor wants to decompress everything in
+ a single step).
+*/
+
+ /* constants */
+
+#define Z_NO_FLUSH 0
+#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_SYNC_FLUSH 2
+#define Z_FULL_FLUSH 3
+#define Z_FINISH 4
+/* Allowed flush values; see deflate() below for details */
+
+#define Z_OK 0
+#define Z_STREAM_END 1
+#define Z_NEED_DICT 2
+#define Z_ERRNO (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR (-3)
+#define Z_MEM_ERROR (-4)
+#define Z_BUF_ERROR (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION 0
+#define Z_BEST_SPEED 1
+#define Z_BEST_COMPRESSION 9
+#define Z_DEFAULT_COMPRESSION (-1)
+/* compression levels */
+
+#define Z_FILTERED 1
+#define Z_HUFFMAN_ONLY 2
+#define Z_DEFAULT_STRATEGY 0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY 0
+#define Z_ASCII 1
+#define Z_UNKNOWN 2
+/* Possible values of the data_type field */
+
+#define Z_DEFLATED 8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+ /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is
+ not compatible with the zlib.h header file used by the application.
+ This check is automatically made by deflateInit and inflateInit.
+ */
+
+/*
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+ Initializes the internal stream state for compression. The fields
+ zalloc, zfree and opaque must be initialized before by the caller.
+ If zalloc and zfree are set to Z_NULL, deflateInit updates them to
+ use default allocation functions.
+
+ The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at
+ all (the input data is simply copied a block at a time).
+ Z_DEFAULT_COMPRESSION requests a default compromise between speed and
+ compression (currently equivalent to level 6).
+
+ deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+ Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+ with the version assumed by the caller (ZLIB_VERSION).
+ msg is set to null if there is no error message. deflateInit does not
+ perform any compression: this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+ deflate compresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce some
+ output latency (reading input without producing any output) except when
+ forced to flush.
+
+ The detailed semantics are as follows. deflate performs one or both of the
+ following actions:
+
+ - Compress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in and avail_in are updated and
+ processing will resume at this point for the next call of deflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. This action is forced if the parameter flush is non zero.
+ Forcing flush frequently degrades the compression ratio, so this parameter
+ should be set only when necessary (in interactive applications).
+ Some output may be provided even if flush is not set.
+
+ Before the call of deflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating avail_in or avail_out accordingly; avail_out
+ should never be zero before the call. The application can consume the
+ compressed output when it wants, for example when the output buffer is full
+ (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
+ and with zero avail_out, it must be called again after making room in the
+ output buffer because there might be more output pending.
+
+ If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+ flushed to the output buffer and the output is aligned on a byte boundary, so
+ that the decompressor can get all input data available so far. (In particular
+ avail_in is zero after the call if enough output space has been provided
+ before the call.) Flushing may degrade compression for some compression
+ algorithms and so it should be used only when necessary.
+
+ If flush is set to Z_FULL_FLUSH, all output is flushed as with
+ Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+ restart from this point if previous compressed data has been damaged or if
+ random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+ the compression.
+
+ If deflate returns with avail_out == 0, this function must be called again
+ with the same value of the flush parameter and more output space (updated
+ avail_out), until the flush is complete (deflate returns with non-zero
+ avail_out).
+
+ If the parameter flush is set to Z_FINISH, pending input is processed,
+ pending output is flushed and deflate returns with Z_STREAM_END if there
+ was enough output space; if deflate returns with Z_OK, this function must be
+ called again with Z_FINISH and more output space (updated avail_out) but no
+ more input data, until it returns with Z_STREAM_END or an error. After
+ deflate has returned Z_STREAM_END, the only possible operations on the
+ stream are deflateReset or deflateEnd.
+
+ Z_FINISH can be used immediately after deflateInit if all the compression
+ is to be done in a single step. In this case, avail_out must be at least
+ 0.1% larger than avail_in plus 12 bytes. If deflate does not return
+ Z_STREAM_END, then it must be called again as described above.
+
+ deflate() sets strm->adler to the adler32 checksum of all input read
+ so far (that is, total_in bytes).
+
+ deflate() may update data_type if it can make a good guess about
+ the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
+ binary. This field is only for information purposes and does not affect
+ the compression algorithm in any manner.
+
+ deflate() returns Z_OK if some progress has been made (more input
+ processed or more output produced), Z_STREAM_END if all input has been
+ consumed and all output has been produced (only when flush is set to
+ Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+ if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
+ (for example avail_in or avail_out was zero).
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+
+ deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+ stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+ prematurely (some input or output was discarded). In the error case,
+ msg may be set but then points to a static string (which must not be
+ deallocated).
+*/
+
+
+/*
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+ Initializes the internal stream state for decompression. The fields
+ next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+ the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
+ value depends on the compression method), inflateInit determines the
+ compression method from the zlib header and allocates all data structures
+ accordingly; otherwise the allocation will be deferred to the first call of
+ inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+ use default allocation functions.
+
+ inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller. msg is set to null if there is no error
+ message. inflateInit does not perform any decompression apart from reading
+ the zlib header if present: this will be done by inflate(). (So next_in and
+ avail_in may be modified, but next_out and avail_out are unchanged.)
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+ inflate decompresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may some
+ introduce some output latency (reading input without producing any output)
+ except when forced to flush.
+
+ The detailed semantics are as follows. inflate performs one or both of the
+ following actions:
+
+ - Decompress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in is updated and processing
+ will resume at this point for the next call of inflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. inflate() provides as much output as possible, until there
+ is no more input data or no more space in the output buffer (see below
+ about the flush parameter).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating the next_* and avail_* values accordingly.
+ The application can consume the uncompressed output when it wants, for
+ example when the output buffer is full (avail_out == 0), or after each
+ call of inflate(). If inflate returns Z_OK and with zero avail_out, it
+ must be called again after making room in the output buffer because there
+ might be more output pending.
+
+ If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
+ output as possible to the output buffer. The flushing behavior of inflate is
+ not specified for values of the flush parameter other than Z_SYNC_FLUSH
+ and Z_FINISH, but the current implementation actually flushes as much output
+ as possible anyway.
+
+ inflate() should normally be called until it returns Z_STREAM_END or an
+ error. However if all decompression is to be performed in a single step
+ (a single call of inflate), the parameter flush should be set to
+ Z_FINISH. In this case all pending input is processed and all pending
+ output is flushed; avail_out must be large enough to hold all the
+ uncompressed data. (The size of the uncompressed data may have been saved
+ by the compressor for this purpose.) The next operation on this stream must
+ be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+ is never required, but can be used to inform inflate that a faster routine
+ may be used for the single inflate() call.
+
+ If a preset dictionary is needed at this point (see inflateSetDictionary
+ below), inflate sets strm-adler to the adler32 checksum of the
+ dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise
+ it sets strm->adler to the adler32 checksum of all output produced
+ so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
+ an error code as described below. At the end of the stream, inflate()
+ checks that its computed adler32 checksum is equal to that saved by the
+ compressor and returns Z_STREAM_END only if the checksum is correct.
+
+ inflate() returns Z_OK if some progress has been made (more input processed
+ or more output produced), Z_STREAM_END if the end of the compressed data has
+ been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+ preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+ corrupted (input stream not conforming to the zlib format or incorrect
+ adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
+ (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if no progress is possible or if there was not
+ enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
+ case, the application may then call inflateSync to look for a good
+ compression block.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+
+ inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+ was inconsistent. In the error case, msg may be set but then points to a
+ static string (which must not be deallocated).
+*/
+
+ /* Advanced functions */
+
+/*
+ The following functions are needed only in some special applications.
+*/
+
+/*
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+ int level,
+ int method,
+ int windowBits,
+ int memLevel,
+ int strategy));
+
+ This is another version of deflateInit with more compression options. The
+ fields next_in, zalloc, zfree and opaque must be initialized before by
+ the caller.
+
+ The method parameter is the compression method. It must be Z_DEFLATED in
+ this version of the library.
+
+ The windowBits parameter is the base two logarithm of the window size
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
+ deflateInit is used instead.
+
+ The memLevel parameter specifies how much memory should be allocated
+ for the internal compression state. memLevel=1 uses minimum memory but
+ is slow and reduces compression ratio; memLevel=9 uses maximum memory
+ for optimal speed. The default value is 8. See zconf.h for total memory
+ usage as a function of windowBits and memLevel.
+
+ The strategy parameter is used to tune the compression algorithm. Use the
+ value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+ filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
+ string match). Filtered data consists mostly of small values with a
+ somewhat random distribution. In this case, the compression algorithm is
+ tuned to compress them better. The effect of Z_FILTERED is to force more
+ Huffman coding and less string matching; it is somewhat intermediate
+ between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
+ the compression ratio but not the correctness of the compressed output even
+ if it is not set appropriately.
+
+ deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
+ method). msg is set to null if there is no error message. deflateInit2 does
+ not perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the compression dictionary from the given byte sequence
+ without producing any compressed output. This function must be called
+ immediately after deflateInit, deflateInit2 or deflateReset, before any
+ call of deflate. The compressor and decompressor must use exactly the same
+ dictionary (see inflateSetDictionary).
+
+ The dictionary should consist of strings (byte sequences) that are likely
+ to be encountered later in the data to be compressed, with the most commonly
+ used strings preferably put towards the end of the dictionary. Using a
+ dictionary is most useful when the data to be compressed is short and can be
+ predicted with good accuracy; the data can then be compressed better than
+ with the default empty dictionary.
+
+ Depending on the size of the compression data structures selected by
+ deflateInit or deflateInit2, a part of the dictionary may in effect be
+ discarded, for example if the dictionary is larger than the window size in
+ deflate or deflate2. Thus the strings most likely to be useful should be
+ put at the end of the dictionary, not at the front.
+
+ Upon return of this function, strm->adler is set to the Adler32 value
+ of the dictionary; the decompressor may later use this value to determine
+ which dictionary has been used by the compressor. (The Adler32 value
+ applies to the whole dictionary even if only a subset of the dictionary is
+ actually used by the compressor.)
+
+ deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+ parameter is invalid (such as NULL dictionary) or the stream state is
+ inconsistent (for example if deflate has already been called for this stream
+ or if the compression method is bsort). deflateSetDictionary does not
+ perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+ z_streamp source));
+/*
+ Sets the destination stream as a complete copy of the source stream.
+
+ This function can be useful when several compression strategies will be
+ tried, for example when there are several ways of pre-processing the input
+ data with a filter. The streams that will be discarded should then be freed
+ by calling deflateEnd. Note that deflateCopy duplicates the internal
+ compression state which can be quite large, so this strategy is slow and
+ can consume lots of memory.
+
+ deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+ (such as zalloc being NULL). msg is left unchanged in both source and
+ destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to deflateEnd followed by deflateInit,
+ but does not free and reallocate all the internal compression state.
+ The stream will keep the same compression level and any other attributes
+ that may have been set by deflateInit2.
+
+ deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+ int level,
+ int strategy));
+/*
+ Dynamically update the compression level and compression strategy. The
+ interpretation of level and strategy is as in deflateInit2. This can be
+ used to switch between compression and straight copy of the input data, or
+ to switch to a different kind of input data requiring a different
+ strategy. If the compression level is changed, the input available so far
+ is compressed with the old level (and may be flushed); the new level will
+ take effect only at the next call of deflate().
+
+ Before the call of deflateParams, the stream state must be set as for
+ a call of deflate(), since the currently available input may have to
+ be compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+ deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+ stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
+ if strm->avail_out was zero.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+ int windowBits));
+
+ This is another version of inflateInit with an extra parameter. The
+ fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+ before by the caller.
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library. The default value is 15 if inflateInit is used
+ instead. If a compressed stream with a larger window size is given as
+ input, inflate() will return with the error code Z_DATA_ERROR instead of
+ trying to allocate a larger window.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
+ memLevel). msg is set to null if there is no error message. inflateInit2
+ does not perform any decompression apart from reading the zlib header if
+ present: this will be done by inflate(). (So next_in and avail_in may be
+ modified, but next_out and avail_out are unchanged.)
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+ const Bytef *dictionary,
+ uInt dictLength));
+/*
+ Initializes the decompression dictionary from the given uncompressed byte
+ sequence. This function must be called immediately after a call of inflate
+ if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
+ can be determined from the Adler32 value returned by this call of
+ inflate. The compressor and decompressor must use exactly the same
+ dictionary (see deflateSetDictionary).
+
+ inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+ parameter is invalid (such as NULL dictionary) or the stream state is
+ inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+ expected one (incorrect Adler32 value). inflateSetDictionary does not
+ perform any decompression: this will be done by subsequent calls of
+ inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/*
+ Skips invalid compressed data until a full flush point (see above the
+ description of deflate with Z_FULL_FLUSH) can be found, or until all
+ available input is skipped. No output is provided.
+
+ inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+ if no more input was provided, Z_DATA_ERROR if no flush point has been found,
+ or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+ case, the application may save the current current value of total_in which
+ indicates where valid compressed data was found. In the error case, the
+ application may repeatedly call inflateSync, providing more input each time,
+ until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+ This function is equivalent to inflateEnd followed by inflateInit,
+ but does not free and reallocate all the internal decompression state.
+ The stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+
+ /* utility functions */
+
+/*
+ The following utility functions are implemented on top of the
+ basic stream-oriented functions. To simplify the interface, some
+ default options are assumed (compression level and memory usage,
+ standard memory allocation functions). The source code of these
+ utility functions can easily be modified if you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Compresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be at least 0.1% larger than
+ sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
+ compressed buffer.
+ This function can be used to compress a whole file at once if the
+ input file is mmap'ed.
+ compress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen,
+ int level));
+/*
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in deflateInit. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least 0.1% larger than sourceLen plus
+ 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+ compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+ Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
+ const Bytef *source, uLong sourceLen));
+/*
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be large enough to hold the
+ entire uncompressed data. (The size of the uncompressed data must have
+ been saved previously by the compressor and transmitted to the decompressor
+ by some mechanism outside the scope of this compression library.)
+ Upon exit, destLen is the actual size of the compressed buffer.
+ This function can be used to decompress a whole file at once if the
+ input file is mmap'ed.
+
+ uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory, Z_BUF_ERROR if there was not enough room in the output
+ buffer, or Z_DATA_ERROR if the input data was corrupted.
+*/
+
+
+typedef voidp gzFile;
+
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+/*
+ Opens a gzip (.gz) file for reading or writing. The mode parameter
+ is as in fopen ("rb" or "wb") but can also include a compression level
+ ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
+ Huffman only compression as in "wb1h". (See the description
+ of deflateInit2 for more information about the strategy parameter.)
+
+ gzopen can be used to read a file which is not in gzip format; in this
+ case gzread will directly read from the file without decompression.
+
+ gzopen returns NULL if the file could not be opened or if there was
+ insufficient memory to allocate the (de)compression state; errno
+ can be checked to distinguish the two cases (if errno is zero, the
+ zlib error is Z_MEM_ERROR). */
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+ gzdopen() associates a gzFile with the file descriptor fd. File
+ descriptors are obtained from calls like open, dup, creat, pipe or
+ fileno (in the file has been previously opened with fopen).
+ The mode parameter is as in gzopen.
+ The next call of gzclose on the returned gzFile will also close the
+ file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
+ descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
+ gzdopen returns NULL if there was insufficient memory to allocate
+ the (de)compression state.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+ Dynamically update the compression level or strategy. See the description
+ of deflateInit2 for the meaning of these parameters.
+ gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+ opened for writing.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+/*
+ Reads the given number of uncompressed bytes from the compressed file.
+ If the input file was not in gzip format, gzread copies the given number
+ of bytes into the buffer.
+ gzread returns the number of uncompressed bytes actually read (0 for
+ end of file, -1 for error). */
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+ const voidp buf, unsigned len));
+/*
+ Writes the given number of uncompressed bytes into the compressed file.
+ gzwrite returns the number of uncompressed bytes actually written
+ (0 in case of error).
+*/
+
+ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
+/*
+ Converts, formats, and writes the args to the compressed file under
+ control of the format string, as in fprintf. gzprintf returns the number of
+ uncompressed bytes actually written (0 in case of error).
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+ gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+ Reads bytes from the compressed file until len-1 characters are read, or
+ a newline character is read and transferred to buf, or an end-of-file
+ condition is encountered. The string is then terminated with a null
+ character.
+ gzgets returns buf, or Z_NULL in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+/*
+ Writes c, converted to an unsigned char, into the compressed file.
+ gzputc returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
+ Reads one byte from the compressed file. gzgetc returns this byte
+ or -1 in case of end of file or error.
+*/
+
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+/*
+ Flushes all pending output into the compressed file. The parameter
+ flush is as in the deflate() function. The return value is the zlib
+ error number (see function gzerror below). gzflush returns Z_OK if
+ the flush parameter is Z_FINISH and all output could be flushed.
+ gzflush should be called only when strictly necessary because it can
+ degrade compression.
+*/
+
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+ z_off_t offset, int whence));
+/*
+ Sets the starting position for the next gzread or gzwrite on the
+ given compressed file. The offset represents a number of bytes in the
+ uncompressed data stream. The whence parameter is defined as in lseek(2);
+ the value SEEK_END is not supported.
+ If the file is opened for reading, this function is emulated but can be
+ extremely slow. If the file is opened for writing, only forward seeks are
+ supported; gzseek then compresses a sequence of zeroes up to the new
+ starting position.
+
+ gzseek returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error, in
+ particular if the file is opened for writing and the new starting position
+ would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
+/*
+ Rewinds the given file. This function is supported only for reading.
+
+ gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
+/*
+ Returns the starting position for the next gzread or gzwrite on the
+ given compressed file. This position represents a number of bytes in the
+ uncompressed data stream.
+
+ gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+ Returns 1 when EOF has previously been detected reading the given
+ input stream, otherwise zero.
+*/
+
+ZEXTERN int ZEXPORT gzclose OF((gzFile file));
+/*
+ Flushes all pending output if necessary, closes the compressed file
+ and deallocates all the (de)compression state. The return value is the zlib
+ error number (see function gzerror below).
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+ Returns the error message for the last error which occurred on the
+ given compressed file. errnum is set to zlib error number. If an
+ error occurred in the file system and not in the compression library,
+ errnum is set to Z_ERRNO and the application may consult errno
+ to get the exact error code.
+*/
+
+ /* checksum functions */
+
+/*
+ These functions are not related to compression but are exported
+ anyway because they might be useful in applications using the
+ compression library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+
+/*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is NULL, this function returns
+ the required initial value for the checksum.
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster. Usage example:
+
+ uLong adler = adler32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+*/
+
+ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
+/*
+ Update a running crc with the bytes buf[0..len-1] and return the updated
+ crc. If buf is NULL, this function returns the required initial value
+ for the crc. Pre- and post-conditioning (one's complement) is performed
+ within this function so it shouldn't be done by the application.
+ Usage example:
+
+ uLong crc = crc32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = crc32(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+*/
+
+
+ /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+ const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
+ int windowBits, int memLevel,
+ int strategy, const char *version,
+ int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
+ const char *version, int stream_size));
+#define deflateInit(strm, level) \
+ deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit(strm) \
+ inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+ deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+ (strategy), ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+ inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+
+
+#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
+ struct internal_state {int dummy;}; /* hack for buggy compilers */
+#endif
+
+ZEXTERN const char * ZEXPORT zError OF((int err));
+ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z));
+ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _ZLIB_H */
--- /dev/null
+<html>
+<head>
+ <title>
+ zlib general purpose compression library version 1.1.4
+ </title>
+</head>
+<body bgcolor="White" text="Black" vlink="Red" alink="Navy" link="Red">
+<!-- background="zlibbg.gif" -->
+
+<h1> zlib 1.1.4 Manual </h1>
+<hr>
+<a name="Contents"><h2>Contents</h2>
+<ol type="I">
+<li> <a href="#Prologue">Prologue</a>
+<li> <a href="#Introduction">Introduction</a>
+<li> <a href="#Utility functions">Utility functions</a>
+<li> <a href="#Basic functions">Basic functions</a>
+<li> <a href="#Advanced functions">Advanced functions</a>
+<li> <a href="#Constants">Constants</a>
+<li> <a href="#struct z_stream_s">struct z_stream_s</a>
+<li> <a href="#Checksum functions">Checksum functions</a>
+<li> <a href="#Misc">Misc</a>
+</ol>
+<hr>
+<a name="Prologue"><h2> Prologue </h2>
+ 'zlib' general purpose compression library version 1.1.4, March 11th, 2002
+ <p>
+ Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+ <p>
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+ <p>
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+ <ol>
+ <li> The origin of this software must not be misrepresented ; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ <li> Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ <li> This notice may not be removed or altered from any source distribution.
+ </ol>
+
+ <dl>
+ <dt>Jean-loup Gailly
+ <dd><a href="mailto:jloup@gzip.org">jloup@gzip.org</a>
+ <dt>Mark Adler
+ <dd><a href="mailto:madler@alumni.caltech.edu">madler@alumni.caltech.edu</a>
+ </dl>
+
+ The data format used by the zlib library is described by RFCs (Request for
+ Comments) 1950 to 1952 in the files
+ <a href="ftp://ds.internic.net/rfc/rfc1950.txt">
+ ftp://ds.internic.net/rfc/rfc1950.txt </a>
+ (zlib format),
+ <a href="ftp://ds.internic.net/rfc/rfc1951.txt">
+ rfc1951.txt </a>
+ (<a href="#deflate">deflate</a> format) and
+ <a href="ftp://ds.internic.net/rfc/rfc1952.txt">
+ rfc1952.txt </a>
+ (gzip format).
+ <p>
+ This manual is converted from zlib.h by
+ <a href="mailto:piaip@csie.ntu.edu.tw"> piaip </a>
+ <p>
+ Visit <a href="http://ftp.cdrom.com/pub/infozip/zlib/">
+ http://ftp.cdrom.com/pub/infozip/zlib/</a>
+ for the official zlib web page.
+ <p>
+
+<hr>
+<a name="Introduction"><h2> Introduction </h2>
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed
+ data. This version of the library supports only one compression method
+ (deflation) but other algorithms will be added later and will have the same
+ stream interface.
+ <p>
+
+ Compression can be done in a single step if the buffers are large
+ enough (for example if an input file is mmap'ed), or can be done by
+ repeated calls of the compression function. In the latter case, the
+ application must provide more input and/or consume the output
+ (providing more output space) before each call.
+ <p>
+
+ The library also supports reading and writing files in gzip (.gz) format
+ with an interface similar to that of stdio.
+ <p>
+
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never
+ crash even in case of corrupted input.
+ <p>
+
+<hr>
+<a name="Utility functions"><h2> Utility functions </h2>
+ The following utility functions are implemented on top of the
+ <a href="#Basic functions">basic stream-oriented functions</a>.
+ To simplify the interface, some
+ default options are assumed (compression level and memory usage,
+ standard memory allocation functions). The source code of these
+ utility functions can easily be modified if you need special options.
+<h3> Function list </h3>
+<ul>
+<li> int <a href="#compress">compress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);
+<li> int <a href="#compress2">compress2</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level);
+<li> int <a href="#uncompress">uncompress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);
+<li> typedef voidp gzFile;
+<li> gzFile <a href="#gzopen">gzopen</a> (const char *path, const char *mode);
+<li> gzFile <a href="#gzdopen">gzdopen</a> (int fd, const char *mode);
+<li> int <a href="#gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);
+<li> int <a href="#gzread">gzread</a> (gzFile file, voidp buf, unsigned len);
+<li> int <a href="#gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);
+<li> int VA <a href="#gzprintf">gzprintf</a> (gzFile file, const char *format, ...);
+<li> int <a href="#gzputs">gzputs</a> (gzFile file, const char *s);
+<li> char * <a href="#gzgets">gzgets</a> (gzFile file, char *buf, int len);
+<li> int <a href="#gzputc">gzputc</a> (gzFile file, int c);
+<li> int <a href="#gzgetc">gzgetc</a> (gzFile file);
+<li> int <a href="#gzflush">gzflush</a> (gzFile file, int flush);
+<li> z_off_t <a href="#gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);
+<li> z_off_t <a href="#gztell">gztell</a> (gzFile file);
+<li> int <a href="#gzrewind">gzrewind</a> (gzFile file);
+<li> int <a href="#gzeof">gzeof</a> (gzFile file);
+<li> int <a href="#gzclose">gzclose</a> (gzFile file);
+<li> const char * <a href="#gzerror">gzerror</a> (gzFile file, int *errnum);
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> int <a name="compress">compress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
+<dd>
+ Compresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be at least 0.1% larger than
+ sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
+ compressed buffer.<p>
+ This function can be used to <a href="#compress">compress</a> a whole file at once if the
+ input file is mmap'ed.<p>
+ <a href="#compress">compress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
+ buffer.<p>
+
+<font color="Blue"><dt> int <a name="compress2">compress2</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level);</font>
+<dd>
+ Compresses the source buffer into the destination buffer. The level
+ parameter has the same meaning as in <a href="#deflateInit">deflateInit</a>. sourceLen is the byte
+ length of the source buffer. Upon entry, destLen is the total size of the
+ destination buffer, which must be at least 0.1% larger than sourceLen plus
+ 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+ <p>
+
+ <a href="#compress2">compress2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output buffer,
+ <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the level parameter is invalid.
+ <p>
+
+<font color="Blue"><dt> int <a name="uncompress">uncompress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
+<dd>
+ Decompresses the source buffer into the destination buffer. sourceLen is
+ the byte length of the source buffer. Upon entry, destLen is the total
+ size of the destination buffer, which must be large enough to hold the
+ entire uncompressed data. (The size of the uncompressed data must have
+ been saved previously by the compressor and transmitted to the decompressor
+ by some mechanism outside the scope of this compression library.)
+ Upon exit, destLen is the actual size of the compressed buffer. <p>
+ This function can be used to decompress a whole file at once if the
+ input file is mmap'ed.
+ <p>
+
+ <a href="#uncompress">uncompress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
+ buffer, or <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was corrupted.
+ <p>
+
+<dt> typedef voidp gzFile;
+<dd> <p>
+
+<font color="Blue"><dt> gzFile <a name="gzopen">gzopen</a> (const char *path, const char *mode);</font>
+<dd>
+ Opens a gzip (.gz) file for reading or writing. The mode parameter
+ is as in fopen ("rb" or "wb") but can also include a compression level
+ ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
+ Huffman only compression as in "wb1h". (See the description
+ of <a href="#deflateInit2">deflateInit2</a> for more information about the strategy parameter.)
+ <p>
+
+ <a href="#gzopen">gzopen</a> can be used to read a file which is not in gzip format ; in this
+ case <a href="#gzread">gzread</a> will directly read from the file without decompression.
+ <p>
+
+ <a href="#gzopen">gzopen</a> returns NULL if the file could not be opened or if there was
+ insufficient memory to allocate the (de)compression <a href="#state">state</a> ; errno
+ can be checked to distinguish the two cases (if errno is zero, the
+ zlib error is <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a>).
+ <p>
+
+<font color="Blue"><dt> gzFile <a name="gzdopen">gzdopen</a> (int fd, const char *mode);</font>
+<dd>
+ <a href="#gzdopen">gzdopen</a>() associates a gzFile with the file descriptor fd. File
+ descriptors are obtained from calls like open, dup, creat, pipe or
+ fileno (in the file has been previously opened with fopen).
+ The mode parameter is as in <a href="#gzopen">gzopen</a>.
+ <p>
+ The next call of <a href="#gzclose">gzclose</a> on the returned gzFile will also close the
+ file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
+ descriptor fd. If you want to keep fd open, use <a href="#gzdopen">gzdopen</a>(dup(fd), mode).
+ <p>
+ <a href="#gzdopen">gzdopen</a> returns NULL if there was insufficient memory to allocate
+ the (de)compression <a href="#state">state</a>.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);</font>
+<dd>
+ Dynamically update the compression level or strategy. See the description
+ of <a href="#deflateInit2">deflateInit2</a> for the meaning of these parameters.
+ <p>
+ <a href="#gzsetparams">gzsetparams</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the file was not
+ opened for writing.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzread">gzread</a> (gzFile file, voidp buf, unsigned len);</font>
+<dd>
+ Reads the given number of uncompressed bytes from the compressed file.
+ If the input file was not in gzip format, <a href="#gzread">gzread</a> copies the given number
+ of bytes into the buffer.
+ <p>
+ <a href="#gzread">gzread</a> returns the number of uncompressed bytes actually read (0 for
+ end of file, -1 for error).
+ <p>
+
+<font color="Blue"><dt> int <a name="gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);</font>
+<dd>
+ Writes the given number of uncompressed bytes into the compressed file.
+ <a href="#gzwrite">gzwrite</a> returns the number of uncompressed bytes actually written
+ (0 in case of error).
+ <p>
+
+<font color="Blue"><dt> int VA <a name="gzprintf">gzprintf</a> (gzFile file, const char *format, ...);</font>
+<dd>
+ Converts, formats, and writes the args to the compressed file under
+ control of the format string, as in fprintf. <a href="#gzprintf">gzprintf</a> returns the number of
+ uncompressed bytes actually written (0 in case of error).
+ <p>
+
+<font color="Blue"><dt> int <a name="gzputs">gzputs</a> (gzFile file, const char *s);</font>
+<dd>
+ Writes the given null-terminated string to the compressed file, excluding
+ the terminating null character.
+ <p>
+ <a href="#gzputs">gzputs</a> returns the number of characters written, or -1 in case of error.
+ <p>
+
+<font color="Blue"><dt> char * <a name="gzgets">gzgets</a> (gzFile file, char *buf, int len);</font>
+<dd>
+ Reads bytes from the compressed file until len-1 characters are read, or
+ a newline character is read and transferred to buf, or an end-of-file
+ condition is encountered. The string is then terminated with a null
+ character.
+ <p>
+ <a href="#gzgets">gzgets</a> returns buf, or <a href="#Z_NULL">Z_NULL</a> in case of error.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzputc">gzputc</a> (gzFile file, int c);</font>
+<dd>
+ Writes c, converted to an unsigned char, into the compressed file.
+ <a href="#gzputc">gzputc</a> returns the value that was written, or -1 in case of error.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzgetc">gzgetc</a> (gzFile file);</font>
+<dd>
+ Reads one byte from the compressed file. <a href="#gzgetc">gzgetc</a> returns this byte
+ or -1 in case of end of file or error.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzflush">gzflush</a> (gzFile file, int flush);</font>
+<dd>
+ Flushes all pending output into the compressed file. The parameter
+ flush is as in the <a href="#deflate">deflate</a>() function. The return value is the zlib
+ error number (see function <a href="#gzerror">gzerror</a> below). <a href="#gzflush">gzflush</a> returns <a href="#Z_OK">Z_OK</a> if
+ the flush parameter is <a href="#Z_FINISH">Z_FINISH</a> and all output could be flushed.
+ <p>
+ <a href="#gzflush">gzflush</a> should be called only when strictly necessary because it can
+ degrade compression.
+ <p>
+
+<font color="Blue"><dt> z_off_t <a name="gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);</font>
+<dd>
+ Sets the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
+ given compressed file. The offset represents a number of bytes in the
+ uncompressed data stream. The whence parameter is defined as in lseek(2);
+ the value SEEK_END is not supported.
+ <p>
+ If the file is opened for reading, this function is emulated but can be
+ extremely slow. If the file is opened for writing, only forward seeks are
+ supported ; <a href="#gzseek">gzseek</a> then compresses a sequence of zeroes up to the new
+ starting position.
+ <p>
+ <a href="#gzseek">gzseek</a> returns the resulting offset location as measured in bytes from
+ the beginning of the uncompressed stream, or -1 in case of error, in
+ particular if the file is opened for writing and the new starting position
+ would be before the current position.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzrewind">gzrewind</a> (gzFile file);</font>
+<dd>
+ Rewinds the given file. This function is supported only for reading.
+ <p>
+ <a href="#gzrewind">gzrewind</a>(file) is equivalent to (int)<a href="#gzseek">gzseek</a>(file, 0L, SEEK_SET)
+ <p>
+
+<font color="Blue"><dt> z_off_t <a name="gztell">gztell</a> (gzFile file);</font>
+<dd>
+ Returns the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
+ given compressed file. This position represents a number of bytes in the
+ uncompressed data stream.
+ <p>
+
+ <a href="#gztell">gztell</a>(file) is equivalent to <a href="#gzseek">gzseek</a>(file, 0L, SEEK_CUR)
+ <p>
+
+<font color="Blue"><dt> int <a name="gzeof">gzeof</a> (gzFile file);</font>
+<dd>
+ Returns 1 when EOF has previously been detected reading the given
+ input stream, otherwise zero.
+ <p>
+
+<font color="Blue"><dt> int <a name="gzclose">gzclose</a> (gzFile file);</font>
+<dd>
+ Flushes all pending output if necessary, closes the compressed file
+ and deallocates all the (de)compression <a href="#state">state</a>. The return value is the zlib
+ error number (see function <a href="#gzerror">gzerror</a> below).
+ <p>
+
+<font color="Blue"><dt> const char * <a name="gzerror">gzerror</a> (gzFile file, int *errnum);</font>
+<dd>
+ Returns the error message for the last error which occurred on the
+ given compressed file. errnum is set to zlib error number. If an
+ error occurred in the file system and not in the compression library,
+ errnum is set to <a href="#Z_ERRNO">Z_ERRNO</a> and the application may consult errno
+ to get the exact error code.
+ <p>
+</dl>
+<hr>
+<a name="Basic functions"><h2> Basic functions </h2>
+<h3> Function list </h3>
+<ul>
+<li> const char * <a href="#zlibVersion">zlibVersion</a> (void);
+<li> int <a href="#deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);
+<li> int <a href="#deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
+<li> int <a href="#deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
+<li> int <a href="#inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
+</ul>
+
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> const char * <a name="zlibVersion">zlibVersion</a> (void);</font>
+<dd> The application can compare <a href="#zlibVersion">zlibVersion</a> and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is
+ not compatible with the zlib.h header file used by the application.
+ This check is automatically made by <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a>.
+ <p>
+
+<font color="Blue"><dt> int <a name="deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);</font>
+<dd>
+ Initializes the internal stream <a href="#state">state</a> for compression. The fields
+ <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by the caller.
+ If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#deflateInit">deflateInit</a> updates them to
+ use default allocation functions.
+ <p>
+
+ The compression level must be <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>, or between 0 and 9:
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at
+ all (the input data is simply copied a block at a time).
+ <p>
+
+ <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a> requests a default compromise between speed and
+ compression (currently equivalent to level 6).
+ <p>
+
+ <a href="#deflateInit">deflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if level is not a valid compression level,
+ <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version (<a href="#zlib_version">zlib_version</a>) is incompatible
+ with the version assumed by the caller (ZLIB_VERSION).
+ <a href="#msg">msg</a> is set to null if there is no error message. <a href="#deflateInit">deflateInit</a> does not
+ perform any compression: this will be done by <a href="#deflate">deflate</a>().
+ <p>
+
+<font color="Blue"><dt> int <a name="deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
+<dd>
+ <a href="#deflate">deflate</a> compresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may introduce some
+ output latency (reading input without producing any output) except when
+ forced to flush.<p>
+
+ The detailed semantics are as follows. <a href="#deflate">deflate</a> performs one or both of the
+ following actions:
+
+ <ul>
+ <li> Compress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> are updated and
+ processing will resume at this point for the next call of <a href="#deflate">deflate</a>().
+
+ <li>
+ Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a>
+ accordingly. This action is forced if the parameter flush is non zero.
+ Forcing flush frequently degrades the compression ratio, so this parameter
+ should be set only when necessary (in interactive applications).
+ Some output may be provided even if flush is not set.
+ </ul> <p>
+
+ Before the call of <a href="#deflate">deflate</a>(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> accordingly ; <a href="#avail_out">avail_out</a>
+ should never be zero before the call. The application can consume the
+ compressed output when it wants, for example when the output buffer is full
+ (<a href="#avail_out">avail_out</a> == 0), or after each call of <a href="#deflate">deflate</a>(). If <a href="#deflate">deflate</a> returns <a href="#Z_OK">Z_OK</a>
+ and with zero <a href="#avail_out">avail_out</a>, it must be called again after making room in the
+ output buffer because there might be more output pending.
+ <p>
+
+ If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, all pending output is
+ flushed to the output buffer and the output is aligned on a byte boundary, so
+ that the decompressor can get all input data available so far. (In particular
+ <a href="#avail_in">avail_in</a> is zero after the call if enough output space has been provided
+ before the call.) Flushing may degrade compression for some compression
+ algorithms and so it should be used only when necessary.
+ <p>
+
+ If flush is set to <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>, all output is flushed as with
+ <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, and the compression <a href="#state">state</a> is reset so that decompression can
+ restart from this point if previous compressed data has been damaged or if
+ random access is desired. Using <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a> too often can seriously degrade
+ the compression.
+ <p>
+
+ If <a href="#deflate">deflate</a> returns with <a href="#avail_out">avail_out</a> == 0, this function must be called again
+ with the same value of the flush parameter and more output space (updated
+ <a href="#avail_out">avail_out</a>), until the flush is complete (<a href="#deflate">deflate</a> returns with non-zero
+ <a href="#avail_out">avail_out</a>).
+ <p>
+
+ If the parameter flush is set to <a href="#Z_FINISH">Z_FINISH</a>, pending input is processed,
+ pending output is flushed and <a href="#deflate">deflate</a> returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> if there
+ was enough output space ; if <a href="#deflate">deflate</a> returns with <a href="#Z_OK">Z_OK</a>, this function must be
+ called again with <a href="#Z_FINISH">Z_FINISH</a> and more output space (updated <a href="#avail_out">avail_out</a>) but no
+ more input data, until it returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> or an error. After
+ <a href="#deflate">deflate</a> has returned <a href="#Z_STREAM_END">Z_STREAM_END</a>, the only possible operations on the
+ stream are <a href="#deflateReset">deflateReset</a> or <a href="#deflateEnd">deflateEnd</a>.
+ <p>
+
+ <a href="#Z_FINISH">Z_FINISH</a> can be used immediately after <a href="#deflateInit">deflateInit</a> if all the compression
+ is to be done in a single step. In this case, <a href="#avail_out">avail_out</a> must be at least
+ 0.1% larger than <a href="#avail_in">avail_in</a> plus 12 bytes. If <a href="#deflate">deflate</a> does not return
+ <a href="#Z_STREAM_END">Z_STREAM_END</a>, then it must be called again as described above.
+ <p>
+
+ <a href="#deflate">deflate</a>() sets strm-> <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all input read
+ so far (that is, <a href="#total_in">total_in</a> bytes).
+ <p>
+
+ <a href="#deflate">deflate</a>() may update <a href="#data_type">data_type</a> if it can make a good guess about
+ the input data type (<a href="#Z_ASCII">Z_ASCII</a> or <a href="#Z_BINARY">Z_BINARY</a>). In doubt, the data is considered
+ binary. This field is only for information purposes and does not affect
+ the compression algorithm in any manner.
+ <p>
+
+ <a href="#deflate">deflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input
+ processed or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if all input has been
+ consumed and all output has been produced (only when flush is set to
+ <a href="#Z_FINISH">Z_FINISH</a>), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a> was inconsistent (for example
+ if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible
+ (for example <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> was zero).
+ <p>
+
+<font color="Blue"><dt> int <a name="deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+ <p>
+
+ <a href="#deflateEnd">deflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the
+ stream <a href="#state">state</a> was inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the stream was freed
+ prematurely (some input or output was discarded). In the error case,
+ <a href="#msg">msg</a> may be set but then points to a static string (which must not be
+ deallocated).
+ <p>
+
+<font color="Blue"><dt> int <a name="inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ Initializes the internal stream <a href="#state">state</a> for decompression. The fields
+ <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
+ the caller. If <a href="#next_in">next_in</a> is not <a href="#Z_NULL">Z_NULL</a> and <a href="#avail_in">avail_in</a> is large enough (the exact
+ value depends on the compression method), <a href="#inflateInit">inflateInit</a> determines the
+ compression method from the zlib header and allocates all data structures
+ accordingly ; otherwise the allocation will be deferred to the first call of
+ <a href="#inflate">inflate</a>. If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#inflateInit">inflateInit</a> updates them to
+ use default allocation functions.
+ <p>
+
+ <a href="#inflateInit">inflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version is incompatible with the
+ version assumed by the caller. <a href="#msg">msg</a> is set to null if there is no error
+ message. <a href="#inflateInit">inflateInit</a> does not perform any decompression apart from reading
+ the zlib header if present: this will be done by <a href="#inflate">inflate</a>(). (So <a href="#next_in">next_in</a> and
+ <a href="#avail_in">avail_in</a> may be modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)
+ <p>
+
+<font color="Blue"><dt> int <a name="inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
+<dd>
+ <a href="#inflate">inflate</a> decompresses as much data as possible, and stops when the input
+ buffer becomes empty or the output buffer becomes full. It may some
+ introduce some output latency (reading input without producing any output)
+ except when forced to flush.
+ <p>
+
+ The detailed semantics are as follows. <a href="#inflate">inflate</a> performs one or both of the
+ following actions:
+
+ <ul>
+ <li> Decompress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), <a href="#next_in">next_in</a> is updated and processing
+ will resume at this point for the next call of <a href="#inflate">inflate</a>().
+
+ <li> Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and
+ <a href="#avail_out">avail_out</a> accordingly. <a href="#inflate">inflate</a>() provides as much output as possible,
+ until there is no more input data or no more space in the output buffer
+ (see below about the flush parameter).
+ </ul> <p>
+
+ Before the call of <a href="#inflate">inflate</a>(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating the next_* and avail_* values accordingly.
+ The application can consume the uncompressed output when it wants, for
+ example when the output buffer is full (<a href="#avail_out">avail_out</a> == 0), or after each
+ call of <a href="#inflate">inflate</a>(). If <a href="#inflate">inflate</a> returns <a href="#Z_OK">Z_OK</a> and with zero <a href="#avail_out">avail_out</a>, it
+ must be called again after making room in the output buffer because there
+ might be more output pending.
+ <p>
+
+ If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, <a href="#inflate">inflate</a> flushes as much
+ output as possible to the output buffer. The flushing behavior of <a href="#inflate">inflate</a> is
+ not specified for values of the flush parameter other than <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>
+ and <a href="#Z_FINISH">Z_FINISH</a>, but the current implementation actually flushes as much output
+ as possible anyway.
+ <p>
+
+ <a href="#inflate">inflate</a>() should normally be called until it returns <a href="#Z_STREAM_END">Z_STREAM_END</a> or an
+ error. However if all decompression is to be performed in a single step
+ (a single call of <a href="#inflate">inflate</a>), the parameter flush should be set to
+ <a href="#Z_FINISH">Z_FINISH</a>. In this case all pending input is processed and all pending
+ output is flushed ; <a href="#avail_out">avail_out</a> must be large enough to hold all the
+ uncompressed data. (The size of the uncompressed data may have been saved
+ by the compressor for this purpose.) The next operation on this stream must
+ be <a href="#inflateEnd">inflateEnd</a> to deallocate the decompression <a href="#state">state</a>. The use of <a href="#Z_FINISH">Z_FINISH</a>
+ is never required, but can be used to inform <a href="#inflate">inflate</a> that a faster routine
+ may be used for the single <a href="#inflate">inflate</a>() call.
+ <p>
+
+ If a preset dictionary is needed at this point (see <a href="#inflateSetDictionary">inflateSetDictionary</a>
+ below), <a href="#inflate">inflate</a> sets strm-<a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of the
+ dictionary chosen by the compressor and returns <a href="#Z_NEED_DICT">Z_NEED_DICT</a> ; otherwise
+ it sets strm-> <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all output produced
+ so far (that is, <a href="#total_out">total_out</a> bytes) and returns <a href="#Z_OK">Z_OK</a>, <a href="#Z_STREAM_END">Z_STREAM_END</a> or
+ an error code as described below. At the end of the stream, <a href="#inflate">inflate</a>()
+ checks that its computed <a href="#adler32">adler32</a> checksum is equal to that saved by the
+ compressor and returns <a href="#Z_STREAM_END">Z_STREAM_END</a> only if the checksum is correct.
+ <p>
+
+ <a href="#inflate">inflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input processed
+ or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if the end of the compressed data has
+ been reached and all uncompressed output has been produced, <a href="#Z_NEED_DICT">Z_NEED_DICT</a> if a
+ preset dictionary is needed at this point, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was
+ corrupted (input stream not conforming to the zlib format or incorrect
+ <a href="#adler32">adler32</a> checksum), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent
+ (for example if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible or if there was not
+ enough room in the output buffer when <a href="#Z_FINISH">Z_FINISH</a> is used. In the <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a>
+ case, the application may then call <a href="#inflateSync">inflateSync</a> to look for a good
+ compression block.
+ <p>
+
+<font color="Blue"><dt> int <a name="inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+ <p>
+
+ <a href="#inflateEnd">inflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a>
+ was inconsistent. In the error case, <a href="#msg">msg</a> may be set but then points to a
+ static string (which must not be deallocated).
+</dl>
+<hr>
+<a name="Advanced functions"><h2> Advanced functions </h2>
+ The following functions are needed only in some special applications.
+<h3> Function list </h3>
+<ul>
+<li> int <a href="#deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm,
+<li> int <a href="#deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);
+<li> int <a href="#deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);
+<li> int <a href="#deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);
+<li> int <a href="#inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int windowBits);
+<li> int <a href="#inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);
+<li> int <a href="#inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);
+<li> int <a href="#inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
+
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> int <a name="deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int method, int windowBits, int memLevel, int strategy);</font>
+
+<dd> This is another version of <a href="#deflateInit">deflateInit</a> with more compression options. The
+ fields <a href="#next_in">next_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
+ the caller.<p>
+
+ The method parameter is the compression method. It must be <a href="#Z_DEFLATED">Z_DEFLATED</a> in
+ this version of the library.<p>
+
+ The windowBits parameter is the base two logarithm of the window size
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
+ <a href="#deflateInit">deflateInit</a> is used instead.<p>
+
+ The memLevel parameter specifies how much memory should be allocated
+ for the internal compression <a href="#state">state</a>. memLevel=1 uses minimum memory but
+ is slow and reduces compression ratio ; memLevel=9 uses maximum memory
+ for optimal speed. The default value is 8. See zconf.h for total memory
+ usage as a function of windowBits and memLevel.<p>
+
+ The strategy parameter is used to tune the compression algorithm. Use the
+ value <a href="#Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> for normal data, <a href="#Z_FILTERED">Z_FILTERED</a> for data produced by a
+ filter (or predictor), or <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> to force Huffman encoding only (no
+ string match). Filtered data consists mostly of small values with a
+ somewhat random distribution. In this case, the compression algorithm is
+ tuned to <a href="#compress">compress</a> them better. The effect of <a href="#Z_FILTERED">Z_FILTERED</a> is to force more
+ Huffman coding and less string matching ; it is somewhat intermediate
+ between Z_DEFAULT and <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a>. The strategy parameter only affects
+ the compression ratio but not the correctness of the compressed output even
+ if it is not set appropriately.<p>
+
+ <a href="#deflateInit2">deflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as an invalid
+ method). <a href="#msg">msg</a> is set to null if there is no error message. <a href="#deflateInit2">deflateInit2</a> does
+ not perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
+
+<font color="Blue"><dt> int <a name="deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);</font>
+<dd>
+ Initializes the compression dictionary from the given byte sequence
+ without producing any compressed output. This function must be called
+ immediately after <a href="#deflateInit">deflateInit</a>, <a href="#deflateInit2">deflateInit2</a> or <a href="#deflateReset">deflateReset</a>, before any
+ call of <a href="#deflate">deflate</a>. The compressor and decompressor must use exactly the same
+ dictionary (see <a href="#inflateSetDictionary">inflateSetDictionary</a>).<p>
+
+ The dictionary should consist of strings (byte sequences) that are likely
+ to be encountered later in the data to be compressed, with the most commonly
+ used strings preferably put towards the end of the dictionary. Using a
+ dictionary is most useful when the data to be compressed is short and can be
+ predicted with good accuracy ; the data can then be compressed better than
+ with the default empty dictionary.<p>
+
+ Depending on the size of the compression data structures selected by
+ <a href="#deflateInit">deflateInit</a> or <a href="#deflateInit2">deflateInit2</a>, a part of the dictionary may in effect be
+ discarded, for example if the dictionary is larger than the window size in
+ <a href="#deflate">deflate</a> or deflate2. Thus the strings most likely to be useful should be
+ put at the end of the dictionary, not at the front.<p>
+
+ Upon return of this function, strm-> <a href="#adler">adler</a> is set to the Adler32 value
+ of the dictionary ; the decompressor may later use this value to determine
+ which dictionary has been used by the compressor. (The Adler32 value
+ applies to the whole dictionary even if only a subset of the dictionary is
+ actually used by the compressor.)<p>
+
+ <a href="#deflateSetDictionary">deflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
+ parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
+ inconsistent (for example if <a href="#deflate">deflate</a> has already been called for this stream
+ or if the compression method is bsort). <a href="#deflateSetDictionary">deflateSetDictionary</a> does not
+ perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
+
+<font color="Blue"><dt> int <a name="deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);</font>
+<dd>
+ Sets the destination stream as a complete copy of the source stream.<p>
+
+ This function can be useful when several compression strategies will be
+ tried, for example when there are several ways of pre-processing the input
+ data with a filter. The streams that will be discarded should then be freed
+ by calling <a href="#deflateEnd">deflateEnd</a>. Note that <a href="#deflateCopy">deflateCopy</a> duplicates the internal
+ compression <a href="#state">state</a> which can be quite large, so this strategy is slow and
+ can consume lots of memory.<p>
+
+ <a href="#deflateCopy">deflateCopy</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
+ enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source stream <a href="#state">state</a> was inconsistent
+ (such as <a href="#zalloc">zalloc</a> being NULL). <a href="#msg">msg</a> is left unchanged in both source and
+ destination.<p>
+
+<font color="Blue"><dt> int <a name="deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd> This function is equivalent to <a href="#deflateEnd">deflateEnd</a> followed by <a href="#deflateInit">deflateInit</a>,
+ but does not free and reallocate all the internal compression <a href="#state">state</a>.
+ The stream will keep the same compression level and any other attributes
+ that may have been set by <a href="#deflateInit2">deflateInit2</a>.<p>
+
+ <a href="#deflateReset">deflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+ stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).<p>
+
+<font color="Blue"><dt> int <a name="deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);</font>
+<dd>
+ Dynamically update the compression level and compression strategy. The
+ interpretation of level and strategy is as in <a href="#deflateInit2">deflateInit2</a>. This can be
+ used to switch between compression and straight copy of the input data, or
+ to switch to a different kind of input data requiring a different
+ strategy. If the compression level is changed, the input available so far
+ is compressed with the old level (and may be flushed); the new level will
+ take effect only at the next call of <a href="#deflate">deflate</a>().<p>
+
+ Before the call of <a href="#deflateParams">deflateParams</a>, the stream <a href="#state">state</a> must be set as for
+ a call of <a href="#deflate">deflate</a>(), since the currently available input may have to
+ be compressed and flushed. In particular, strm-> <a href="#avail_out">avail_out</a> must be
+ non-zero.<p>
+
+ <a href="#deflateParams">deflateParams</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+ stream <a href="#state">state</a> was inconsistent or if a parameter was invalid, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
+ if strm->avail_out was zero.<p>
+
+<font color="Blue"><dt> int <a name="inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int windowBits);</font>
+
+<dd> This is another version of <a href="#inflateInit">inflateInit</a> with an extra parameter. The
+ fields <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized
+ before by the caller.<p>
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library. The default value is 15 if <a href="#inflateInit">inflateInit</a> is used
+ instead. If a compressed stream with a larger window size is given as
+ input, <a href="#inflate">inflate</a>() will return with the error code <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> instead of
+ trying to allocate a larger window.<p>
+
+ <a href="#inflateInit2">inflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
+ memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as a negative
+ memLevel). <a href="#msg">msg</a> is set to null if there is no error message. <a href="#inflateInit2">inflateInit2</a>
+ does not perform any decompression apart from reading the zlib header if
+ present: this will be done by <a href="#inflate">inflate</a>(). (So <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> may be
+ modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)<p>
+
+<font color="Blue"><dt> int <a name="inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);</font>
+<dd>
+ Initializes the decompression dictionary from the given uncompressed byte
+ sequence. This function must be called immediately after a call of <a href="#inflate">inflate</a>
+ if this call returned <a href="#Z_NEED_DICT">Z_NEED_DICT</a>. The dictionary chosen by the compressor
+ can be determined from the Adler32 value returned by this call of
+ <a href="#inflate">inflate</a>. The compressor and decompressor must use exactly the same
+ dictionary (see <a href="#deflateSetDictionary">deflateSetDictionary</a>).<p>
+
+ <a href="#inflateSetDictionary">inflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
+ parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
+ inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the given dictionary doesn't match the
+ expected one (incorrect Adler32 value). <a href="#inflateSetDictionary">inflateSetDictionary</a> does not
+ perform any decompression: this will be done by subsequent calls of
+ <a href="#inflate">inflate</a>().<p>
+
+<font color="Blue"><dt> int <a name="inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+
+<dd> Skips invalid compressed data until a full flush point (see above the
+ description of <a href="#deflate">deflate</a> with <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>) can be found, or until all
+ available input is skipped. No output is provided.<p>
+
+ <a href="#inflateSync">inflateSync</a> returns <a href="#Z_OK">Z_OK</a> if a full flush point has been found, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
+ if no more input was provided, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if no flush point has been found,
+ or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent. In the success
+ case, the application may save the current current value of <a href="#total_in">total_in</a> which
+ indicates where valid compressed data was found. In the error case, the
+ application may repeatedly call <a href="#inflateSync">inflateSync</a>, providing more input each time,
+ until success or end of the input data.<p>
+
+<font color="Blue"><dt> int <a name="inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
+<dd>
+ This function is equivalent to <a href="#inflateEnd">inflateEnd</a> followed by <a href="#inflateInit">inflateInit</a>,
+ but does not free and reallocate all the internal decompression <a href="#state">state</a>.
+ The stream will keep attributes that may have been set by <a href="#inflateInit2">inflateInit2</a>.
+ <p>
+
+ <a href="#inflateReset">inflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
+ stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).
+ <p>
+</dl>
+
+<hr>
+<a name="Checksum functions"><h2> Checksum functions </h2>
+ These functions are not related to compression but are exported
+ anyway because they might be useful in applications using the
+ compression library.
+<h3> Function list </h3>
+<ul>
+<li> uLong <a href="#adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);
+<li> uLong <a href="#crc32">crc32</a> (uLong crc, const Bytef *buf, uInt len);
+</ul>
+<h3> Function description </h3>
+<dl>
+<font color="Blue"><dt> uLong <a name="adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);</font>
+<dd>
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is NULL, this function returns
+ the required initial value for the checksum.
+ <p>
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster. Usage example:
+ <pre>
+
+ uLong <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(<a href="#adler">adler</a>, buffer, length);
+ }
+ if (<a href="#adler">adler</a> != original_adler) error();
+ </pre>
+
+<font color="Blue"><dt> uLong <a name="crc32">crc32</a> (uLong crc, const Bytef *buf, uInt len);</font>
+<dd>
+ Update a running crc with the bytes buf[0..len-1] and return the updated
+ crc. If buf is NULL, this function returns the required initial value
+ for the crc. Pre- and post-conditioning (one's complement) is performed
+ within this function so it shouldn't be done by the application.
+ Usage example:
+ <pre>
+
+ uLong crc = <a href="#crc32">crc32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = <a href="#crc32">crc32</a>(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+ </pre>
+</dl>
+<hr>
+<a name="struct z_stream_s"><h2> struct z_stream_s </h2>
+<font color="Blue">
+<a name="z_stream_s">
+<pre>
+typedef struct z_stream_s {
+ Bytef *<a name="next_in">next_in</a>; /* next input byte */
+ uInt <a name="avail_in">avail_in</a>; /* number of bytes available at <a href="#next_in">next_in</a> */
+ uLong <a name="total_in">total_in</a>; /* total nb of input bytes read so far */
+
+ Bytef *<a name="next_out">next_out</a>; /* next output byte should be put there */
+ uInt <a name="avail_out">avail_out</a>; /* remaining free space at <a href="#next_out">next_out</a> */
+ uLong <a name="total_out">total_out</a>; /* total nb of bytes output so far */
+
+ char *<a name="msg">msg</a>; /* last error message, NULL if no error */
+ struct internal_state FAR *<a name="state">state</a>; /* not visible by applications */
+
+ alloc_func <a name="zalloc">zalloc</a>; /* used to allocate the internal <a href="#state">state</a> */
+ free_func <a name="zfree">zfree</a>; /* used to free the internal <a href="#state">state</a> */
+ voidpf <a name="opaque">opaque</a>; /* private data object passed to <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> */
+
+ int <a name="data_type">data_type</a>; /* best guess about the data type: ascii or binary */
+ uLong <a name="adler">adler</a>; /* <a href="#adler32">adler32</a> value of the uncompressed data */
+ uLong <a name="reserved">reserved</a>; /* <a href="#reserved">reserved</a> for future use */
+} <a href="#z_stream_s">z_stream</a> ;
+
+typedef <a href="#z_stream_s">z_stream</a> FAR * <a name="z_streamp">z_streamp</a>; ΓΏ
+</pre>
+</font>
+ The application must update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> when <a href="#avail_in">avail_in</a> has
+ dropped to zero. It must update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> when <a href="#avail_out">avail_out</a>
+ has dropped to zero. The application must initialize <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and
+ <a href="#opaque">opaque</a> before calling the init function. All other fields are set by the
+ compression library and must not be updated by the application. <p>
+
+ The <a href="#opaque">opaque</a> value provided by the application will be passed as the first
+ parameter for calls of <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a>. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ <a href="#opaque">opaque</a> value. <p>
+
+ <a href="#zalloc">zalloc</a> must return <a href="#Z_NULL">Z_NULL</a> if there is not enough memory for the object.
+ If zlib is used in a multi-threaded application, <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be
+ thread safe. <p>
+
+ On 16-bit systems, the functions <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this
+ if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+ pointers returned by <a href="#zalloc">zalloc</a> for objects of exactly 65536 bytes *must*
+ have their offset normalized to zero. The default allocation function
+ provided by this library ensures this (see zutil.c). To reduce memory
+ requirements and avoid any allocation of 64K objects, at the expense of
+ compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+ <p>
+
+ The fields <a href="#total_in">total_in</a> and <a href="#total_out">total_out</a> can be used for statistics or
+ progress reports. After compression, <a href="#total_in">total_in</a> holds the total size of
+ the uncompressed data and may be saved for use in the decompressor
+ (particularly if the decompressor wants to decompress everything in
+ a single step). <p>
+
+<hr>
+<a name="Constants"><h2> Constants </h2>
+<font color="Blue">
+<pre>
+#define <a name="Z_NO_FLUSH">Z_NO_FLUSH</a> 0
+#define <a name="Z_PARTIAL_FLUSH">Z_PARTIAL_FLUSH</a> 1
+ /* will be removed, use <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> instead */
+#define <a name="Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> 2
+#define <a name="Z_FULL_FLUSH">Z_FULL_FLUSH</a> 3
+#define <a name="Z_FINISH">Z_FINISH</a> 4
+/* Allowed flush values ; see <a href="#deflate">deflate</a>() below for details */
+
+#define <a name="Z_OK">Z_OK</a> 0
+#define <a name="Z_STREAM_END">Z_STREAM_END</a> 1
+#define <a name="Z_NEED_DICT">Z_NEED_DICT</a> 2
+#define <a name="Z_ERRNO">Z_ERRNO</a> (-1)
+#define <a name="Z_STREAM_ERROR">Z_STREAM_ERROR</a> (-2)
+#define <a name="Z_DATA_ERROR">Z_DATA_ERROR</a> (-3)
+#define <a name="Z_MEM_ERROR">Z_MEM_ERROR</a> (-4)
+#define <a name="Z_BUF_ERROR">Z_BUF_ERROR</a> (-5)
+#define <a name="Z_VERSION_ERROR">Z_VERSION_ERROR</a> (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define <a name="Z_NO_COMPRESSION">Z_NO_COMPRESSION</a> 0
+#define <a name="Z_BEST_SPEED">Z_BEST_SPEED</a> 1
+#define <a name="Z_BEST_COMPRESSION">Z_BEST_COMPRESSION</a> 9
+#define <a name="Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a> (-1)
+/* compression levels */
+
+#define <a name="Z_FILTERED">Z_FILTERED</a> 1
+#define <a name="Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> 2
+#define <a name="Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> 0
+/* compression strategy ; see <a href="#deflateInit2">deflateInit2</a>() below for details */
+
+#define <a name="Z_BINARY">Z_BINARY</a> 0
+#define <a name="Z_ASCII">Z_ASCII</a> 1
+#define <a name="Z_UNKNOWN">Z_UNKNOWN</a> 2
+/* Possible values of the <a href="#data_type">data_type</a> field */
+
+#define <a name="Z_DEFLATED">Z_DEFLATED</a> 8
+/* The <a href="#deflate">deflate</a> compression method (the only one supported in this version) */
+
+#define <a name="Z_NULL">Z_NULL</a> 0 /* for initializing <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a>, <a href="#opaque">opaque</a> */
+
+#define <a name="zlib_version">zlib_version</a> <a href="#zlibVersion">zlibVersion</a>()
+/* for compatibility with versions less than 1.0.2 */
+</pre>
+</font>
+
+<hr>
+<a name="Misc"><h2> Misc </h2>
+ <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a> are macros to allow checking the zlib version
+ and the compiler's view of <a href="#z_stream_s">z_stream</a>.
+ <p>
+ Other functions:
+ <dl>
+ <font color="Blue"><dt> const char * <a name="zError">zError</a> (int err);</font>
+ <font color="Blue"><dt> int <a name="inflateSyncPoint">inflateSyncPoint</a> (<a href="#z_streamp">z_streamp</a> z);</font>
+ <font color="Blue"><dt> const uLongf * <a name="get_crc_table">get_crc_table</a> (void);</font>
+ </dl>
+ <hr>
+ <font size="-1">
+ Last update: Wed Oct 13 20:42:34 1999<br>
+ piapi@csie.ntu.edu.tw
+ </font>
+
+</body>
+</html>
--- /dev/null
+/* zutil.c -- target dependent utility functions for the compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id$ */
+
+#include "zutil.h"
+
+struct internal_state {int dummy;}; /* for buggy compilers */
+
+#ifndef STDC
+extern void exit OF((int));
+#endif
+
+const char *z_errmsg[10] = {
+"need dictionary", /* Z_NEED_DICT 2 */
+"stream end", /* Z_STREAM_END 1 */
+"", /* Z_OK 0 */
+"file error", /* Z_ERRNO (-1) */
+"stream error", /* Z_STREAM_ERROR (-2) */
+"data error", /* Z_DATA_ERROR (-3) */
+"insufficient memory", /* Z_MEM_ERROR (-4) */
+"buffer error", /* Z_BUF_ERROR (-5) */
+"incompatible version",/* Z_VERSION_ERROR (-6) */
+""};
+
+
+const char * ZEXPORT zlibVersion()
+{
+ return ZLIB_VERSION;
+}
+
+#ifdef DEBUG
+
+# ifndef verbose
+# define verbose 0
+# endif
+int z_verbose = verbose;
+
+void z_error (m)
+ char *m;
+{
+ fprintf(stderr, "%s\n", m);
+ exit(1);
+}
+#endif
+
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(err)
+ int err;
+{
+ return ERR_MSG(err);
+}
+
+
+#ifndef HAVE_MEMCPY
+
+void zmemcpy(dest, source, len)
+ Bytef* dest;
+ const Bytef* source;
+ uInt len;
+{
+ if (len == 0) return;
+ do {
+ *dest++ = *source++; /* ??? to be unrolled */
+ } while (--len != 0);
+}
+
+int zmemcmp(s1, s2, len)
+ const Bytef* s1;
+ const Bytef* s2;
+ uInt len;
+{
+ uInt j;
+
+ for (j = 0; j < len; j++) {
+ if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
+ }
+ return 0;
+}
+
+void zmemzero(dest, len)
+ Bytef* dest;
+ uInt len;
+{
+ if (len == 0) return;
+ do {
+ *dest++ = 0; /* ??? to be unrolled */
+ } while (--len != 0);
+}
+#endif
+
+#ifdef __TURBOC__
+#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__)
+/* Small and medium model in Turbo C are for now limited to near allocation
+ * with reduced MAX_WBITS and MAX_MEM_LEVEL
+ */
+# define MY_ZCALLOC
+
+/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
+ * and farmalloc(64K) returns a pointer with an offset of 8, so we
+ * must fix the pointer. Warning: the pointer must be put back to its
+ * original form in order to free it, use zcfree().
+ */
+
+#define MAX_PTR 10
+/* 10*64K = 640K */
+
+local int next_ptr = 0;
+
+typedef struct ptr_table_s {
+ voidpf org_ptr;
+ voidpf new_ptr;
+} ptr_table;
+
+local ptr_table table[MAX_PTR];
+/* This table is used to remember the original form of pointers
+ * to large buffers (64K). Such pointers are normalized with a zero offset.
+ * Since MSDOS is not a preemptive multitasking OS, this table is not
+ * protected from concurrent access. This hack doesn't work anyway on
+ * a protected system like OS/2. Use Microsoft C instead.
+ */
+
+voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+ voidpf buf = opaque; /* just to make some compilers happy */
+ ulg bsize = (ulg)items*size;
+
+ /* If we allocate less than 65520 bytes, we assume that farmalloc
+ * will return a usable pointer which doesn't have to be normalized.
+ */
+ if (bsize < 65520L) {
+ buf = farmalloc(bsize);
+ if (*(ush*)&buf != 0) return buf;
+ } else {
+ buf = farmalloc(bsize + 16L);
+ }
+ if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
+ table[next_ptr].org_ptr = buf;
+
+ /* Normalize the pointer to seg:0 */
+ *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
+ *(ush*)&buf = 0;
+ table[next_ptr++].new_ptr = buf;
+ return buf;
+}
+
+void zcfree (voidpf opaque, voidpf ptr)
+{
+ int n;
+ if (*(ush*)&ptr != 0) { /* object < 64K */
+ farfree(ptr);
+ return;
+ }
+ /* Find the original pointer */
+ for (n = 0; n < next_ptr; n++) {
+ if (ptr != table[n].new_ptr) continue;
+
+ farfree(table[n].org_ptr);
+ while (++n < next_ptr) {
+ table[n-1] = table[n];
+ }
+ next_ptr--;
+ return;
+ }
+ ptr = opaque; /* just to make some compilers happy */
+ Assert(0, "zcfree: ptr not found");
+}
+#endif
+#endif /* __TURBOC__ */
+
+
+#if defined(M_I86) && !defined(__32BIT__)
+/* Microsoft C in 16-bit mode */
+
+# define MY_ZCALLOC
+
+#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
+# define _halloc halloc
+# define _hfree hfree
+#endif
+
+voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+{
+ if (opaque) opaque = 0; /* to make compiler happy */
+ return _halloc((long)items, size);
+}
+
+void zcfree (voidpf opaque, voidpf ptr)
+{
+ if (opaque) opaque = 0; /* to make compiler happy */
+ _hfree(ptr);
+}
+
+#endif /* MSC */
+
+
+#ifndef MY_ZCALLOC /* Any system without a special alloc function */
+
+#ifndef STDC
+extern voidp calloc OF((uInt items, uInt size));
+extern void free OF((voidpf ptr));
+#endif
+
+voidpf zcalloc (opaque, items, size)
+ voidpf opaque;
+ unsigned items;
+ unsigned size;
+{
+ if (opaque) items += size - size; /* make compiler happy */
+ return (voidpf)calloc(items, size);
+}
+
+void zcfree (opaque, ptr)
+ voidpf opaque;
+ voidpf ptr;
+{
+ free(ptr);
+ if (opaque) return; /* make compiler happy */
+}
+
+#endif /* MY_ZCALLOC */
--- /dev/null
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id$ */
+
+#ifndef _Z_UTIL_H
+#define _Z_UTIL_H
+
+#include "zlib.h"
+
+#ifdef STDC
+# include <stddef.h>
+# include <string.h>
+# include <stdlib.h>
+#endif
+#ifdef NO_ERRNO_H
+ extern int errno;
+#else
+# include <errno.h>
+#endif
+
+#ifndef local
+# define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+typedef unsigned char uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long ulg;
+
+extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
+#define ERR_RETURN(strm,err) \
+ return (strm->msg = (char*)ERR_MSG(err), (err))
+/* To be used only when the state is known to be valid */
+
+ /* common constants */
+
+#ifndef DEF_WBITS
+# define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+# define DEF_MEM_LEVEL 8
+#else
+# define DEF_MEM_LEVEL MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES 2
+/* The three kinds of block type */
+
+#define MIN_MATCH 3
+#define MAX_MATCH 258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+ /* target dependencies */
+
+#ifdef MSDOS
+# define OS_CODE 0x00
+# if defined(__TURBOC__) || defined(__BORLANDC__)
+# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+ /* Allow compilation with ANSI keywords only enabled */
+ void _Cdecl farfree( void *block );
+ void *_Cdecl farmalloc( unsigned long nbytes );
+# else
+# include <alloc.h>
+# endif
+# else /* MSC or DJGPP */
+# include <malloc.h>
+# endif
+#endif
+
+#ifdef OS2
+# define OS_CODE 0x06
+#endif
+
+#ifdef WIN32 /* Window 95 & Windows NT */
+# define OS_CODE 0x0b
+#endif
+
+#if defined(VAXC) || defined(VMS)
+# define OS_CODE 0x02
+# define F_OPEN(name, mode) \
+ fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+#endif
+
+#ifdef AMIGA
+# define OS_CODE 0x01
+#endif
+
+#if defined(ATARI) || defined(atarist)
+# define OS_CODE 0x05
+#endif
+
+#if defined(MACOS) || defined(TARGET_OS_MAC)
+# define OS_CODE 0x07
+# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+# include <unix.h> /* for fdopen */
+# else
+# ifndef fdopen
+# define fdopen(fd,mode) NULL /* No fdopen() */
+# endif
+# endif
+#endif
+
+#ifdef __50SERIES /* Prime/PRIMOS */
+# define OS_CODE 0x0F
+#endif
+
+#ifdef TOPS20
+# define OS_CODE 0x0a
+#endif
+
+#if defined(_BEOS_) || defined(RISCOS)
+# define fdopen(fd,mode) NULL /* No fdopen() */
+#endif
+
+#if (defined(_MSC_VER) && (_MSC_VER > 600))
+# define fdopen(fd,type) _fdopen(fd,type)
+#endif
+
+
+ /* Common defaults */
+
+#ifndef OS_CODE
+# define OS_CODE 0x03 /* assume Unix */
+#endif
+
+#ifndef F_OPEN
+# define F_OPEN(name, mode) fopen((name), (mode))
+#endif
+
+ /* functions */
+
+#ifdef HAVE_STRERROR
+ extern char *strerror OF((int));
+# define zstrerror(errnum) strerror(errnum)
+#else
+# define zstrerror(errnum) ""
+#endif
+
+#if defined(pyr)
+# define NO_MEMCPY
+#endif
+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
+ /* Use our own functions for small and medium model with MSC <= 5.0.
+ * You may have to use the same strategy for Borland C (untested).
+ * The __SC__ check is for Symantec.
+ */
+# define NO_MEMCPY
+#endif
+#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
+# define HAVE_MEMCPY
+#endif
+#ifdef HAVE_MEMCPY
+# ifdef SMALL_MEDIUM /* MSDOS small or medium model */
+# define zmemcpy _fmemcpy
+# define zmemcmp _fmemcmp
+# define zmemzero(dest, len) _fmemset(dest, 0, len)
+# else
+# define zmemcpy memcpy
+# define zmemcmp memcmp
+# define zmemzero(dest, len) memset(dest, 0, len)
+# endif
+#else
+ extern void zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+ extern int zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
+ extern void zmemzero OF((Bytef* dest, uInt len));
+#endif
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# include <stdio.h>
+ extern int z_verbose;
+ extern void z_error OF((char *m));
+# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+# define Trace(x) {if (z_verbose>=0) fprintf x ;}
+# define Tracev(x) {if (z_verbose>0) fprintf x ;}
+# define Tracevv(x) {if (z_verbose>1) fprintf x ;}
+# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
+# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
+#else
+# define Assert(cond,msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c,x)
+# define Tracecv(c,x)
+#endif
+
+
+typedef uLong (ZEXPORT *check_func) OF((uLong check, const Bytef *buf,
+ uInt len));
+voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
+void zcfree OF((voidpf opaque, voidpf ptr));
+
+#define ZALLOC(strm, items, size) \
+ (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
+
+#endif /* _Z_UTIL_H */
projects / rrdtool.git / commitdiff