mcelog server is running. When the server is running, the plugin will tail the
specified logfile to retrieve machine check exception information and send a
notification with the details from the logfile. The plugin will use the mcelog
-client protocol to retrieve memory related machine check exceptions.
+client protocol to retrieve memory related machine check exceptions. Note that
+for memory exceptions, notifications are only sent when there is a change in
+the number of corrected/uncorrected memory errors.
-=over 4
+=head3 The Memory block
+
+Note: these options cannot be used in conjunction with the logfile options, they are mutually
+exclusive.
+
+=over 3
=item B<McelogClientSocket> I<Path>
Connect to the mcelog client socket using the UNIX domain socket at I<Path>.
Defaults to B<"/var/run/mcelog-client">.
+=item B<PersistentNotification> B<true>|B<false>
+Override default configuration to only send notifications when sent when there
+is a change in the number of corrected/uncorrected memory errors. When set to
+true notifications will be sent for every read cycle. Default is false. Does
+not affect the stats being dispatched.
+
+=back
+
+=over 4
+
=item B<McelogLogfile> I<Path>
-The mcelog file to parse. Defaults to B<"/var/log/mcelog">.
+The mcelog file to parse. Defaults to B<"/var/log/mcelog">. Note: this option
+cannot be used in conjunction with the memory block options, they are mutually
+exclusive.
=back
Path to the PEM-encoded CA certificate file. Setting this option enables TLS
communication with the MQTT broker, and as such, B<Port> should be the TLS-enabled
port of the MQTT broker.
-A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+This option enables the use of TLS.
=item B<CertificateFile> I<file>
Path to the PEM-encoded certificate file to use as client certificate when
connecting to the MQTT broker.
-A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+Only valid if B<CACert> and B<CertificateKeyFile> are also set.
=item B<CertificateKeyFile> I<file>
Path to the unencrypted PEM-encoded key file corresponding to B<CertificateFile>.
-A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+Only valid if B<CACert> and B<CertificateFile> are also set.
=item B<TLSProtocol> I<protocol>
C<tlsv1.2>) to use for the TLS connection to the broker. If not set a default
version is used which depends on the version of OpenSSL the Mosquitto library
was linked against.
+Only valid if B<CACert> is set.
=item B<CipherSuite> I<ciphersuite>
A string describing the ciphers available for use. See L<ciphers(1)> and the
C<openssl ciphers> utility for more information. If unset, the default ciphers
will be used.
-
+Only valid if B<CACert> is set.
=back
or SQL threads are not running. Defaults to B<false>.
=item B<WsrepStats> I<true|false>
-
+
Enable the collection of wsrep plugin statistics, used in Master-Master
replication setups like in MySQL Galera/Percona XtraDB Cluster.
User needs only privileges to execute 'SHOW GLOBAL STATUS'
-
+
=item B<ConnectTimeout> I<Seconds>
Sets the connect timeout for the MySQL client.
=back
+=head2 Plugin C<nfs>
+
+The I<nfs plugin> collects information about the usage of the Network File
+System (NFS). It counts the number of procedure calls for each procedure,
+grouped by version and whether the system runs as server or client.
+
+It is possibly to omit metrics for a specific NFS version by setting one or
+more of the following options to B<false> (all of them default to B<true>).
+
+=over 4
+
+=item B<ReportV2> B<true>|B<false>
+
+=item B<ReportV3> B<true>|B<false>
+
+=item B<ReportV4> B<true>|B<false>
+
+=back
+
=head2 Plugin C<nginx>
This plugin collects the number of connections and requests handled by the
traffic statistics about connected clients.
To set up OpenVPN to write to the status file periodically, use the
-B<--status> option of OpenVPN. Since OpenVPN can write two different formats,
-you need to set the required format, too. This is done by setting
-B<--status-version> to B<2>.
+B<--status> option of OpenVPN.
So, in a nutshell you need:
openvpn $OTHER_OPTIONS \
- --status "/var/run/openvpn-status" 10 \
- --status-version 2
+ --status "/var/run/openvpn-status" 10
Available options:
When the C<rrdtool> plugin uses a cache (by setting B<CacheTimeout>, see below)
it writes all values for a certain RRD-file if the oldest value is older than
-(or equal to) the number of seconds specified. If some RRD-file is not updated
+(or equal to) the number of seconds specified by B<CacheTimeout>.
+That check happens on new values arriwal. If some RRD-file is not updated
anymore for some reason (the computer was shut down, the network is broken,
-etc.) some values may still be in the cache. If B<CacheFlush> is set, then the
-entire cache is searched for entries older than B<CacheTimeout> seconds and
-written to disk every I<Seconds> seconds. Since this is kind of expensive and
-does nothing under normal circumstances, this value should not be too small.
-900 seconds might be a good value, though setting this to 7200 seconds doesn't
-normally do much harm either.
+etc.) some values may still be in the cache. If B<CacheFlush> is set, then
+every I<Seconds> seconds the entire cache is searched for entries older than
+B<CacheTimeout> + B<RandomTimeout> seconds. The entries found are written to
+disk. Since scanning the entire cache is kind of expensive and does nothing
+under normal circumstances, this value should not be too small. 900 seconds
+might be a good value, though setting this to 7200 seconds doesn't normally
+do much harm either.
+
+Defaults to 10x B<CacheTimeout>.
+B<CacheFlush> must be larger than or equal to B<CacheTimeout>, otherwise the
+above default is used.
=item B<CacheTimeout> I<Seconds>
This is useful for deploying I<collectd> in a heterogeneous environment, where
swap sizes differ and you want to specify generic thresholds or similar.
+=item B<ReportIO> B<true>|B<false>
+
+Enables or disables reporting swap IO. Defaults to B<true>.
+
+This is useful for the cases when swap IO is not neccessary, is not available,
+or is not reliable.
+
=back
=head2 Plugin C<syslog>
<Plugin table>
<Table "/proc/slabinfo">
+ #Plugin "slab"
Instance "slabinfo"
Separator " "
<Result>
=over 4
+=item B<Plugin> I<Plugin>
+
+If specified, I<Plugin> is used as the plugin name when submitting values.
+Defaults to B<table>.
+
=item B<Instance> I<instance>
-If specified, I<instance> is used as the plugin instance. So, in the above
-example, the plugin name C<table-slabinfo> would be used. If omitted, the
+If specified, I<instance> is used as the plugin instance. If omitted, the
filename of the table is used instead, with all special characters replaced
with an underscore (C<_>).
=item B<BlockDeviceFormat> B<target>|B<source>
If I<BlockDeviceFormat> is set to B<target>, the default, then the device name
-seen by the guest will be used for reporting metrics.
+seen by the guest will be used for reporting metrics.
This corresponds to the C<E<lt>targetE<gt>> node in the XML definition of the
domain.