Select partitions based on the filesystem type.
-=item B<IgnoreSelected> I<true>|I<false>
+=item B<IgnoreSelected> B<true>|B<false>
Invert the selection: If set to true, all partitions B<except> the ones that
match any one of the criteria are collected. By default only selected
partitions are collected if a selection is made. If no selection is configured
at all, B<all> partitions are selected.
-=item B<ReportByDevice> I<true>|I<false>
+=item B<ReportByDevice> B<true>|B<false>
Report using the device name rather than the mountpoint. i.e. with this I<false>,
(the default), it will report a disk as "root", but with it I<true>, it will be
"sda1" (or whichever).
+=item B<ReportReserved> B<true>|B<false>
+
+When enabled, the blocks reserved for root are reported separately. When
+disabled (the default for backwards compatibility reasons) the reserved space
+will be included in the "free" space.
+
+When disabled, the "df" type will be used to store "free" and "used" space. The
+mount point or disk name (see option B<ReportByDevice>) is used as type
+instance in this case (again: backwards compatibility).
+
+When enabled, the type "df_complex" is used and three files are created. The
+mount point or disk name is used as plugin instance and the type instance is
+set to "free", "reserved" and "used" as appropriate.
+
+Enabling this option is recommended.
+
+=item B<ReportInodes> B<true>|B<false>
+
+Enables or disables reporting of free, reserved and used inodes. Defaults to
+inode collection being disabled.
+
+Enable this option if inodes are a scarce resource for you, usually because
+many small files are stored on the disk. This is a usual scenario for mail
+transfer agents and web caches.
+
=back
=head2 Plugin C<disk>
</Disks>
<VolumePerf>
+ Interval 30
GetIO "volume0"
IgnoreSelectedIO false
GetOps "volume0"
</VolumePerf>
<VolumeUsage>
+ Interval 30
GetCapacity "vol0"
GetCapacity "vol1"
IgnoreSelectedCapacity false
=over 4
-=item B<Multiplier> I<Multiplier>
-
-The host specific interval between data collections is multiplied by this value
-for collecting these data.
-
-Optional
-
-Type: integer
+=item B<Interval> I<Seconds>
-Default: 1
+Collect the respective statistics every I<Seconds> seconds. Defaults to the
+host specific setting.
=back
=over 4
+=item B<Interval> I<Seconds>
+
+Collect volume performance data every I<Seconds> seconds.
+
=item B<GetIO> I<Volume>
=item B<GetOps> I<Volume>
=over 4
+=item B<Interval> I<Seconds>
+
+Collect volume usage statistics every I<Seconds> seconds.
+
=item B<GetCapacity> I<VolumeName>
The current capacity of the volume will be collected. This will result in two
=item B<GetSnapshot> I<VolumeName>
-B<Defunct!> Select volumes from which to collect snapshot information.
+Select volumes from which to collect snapshot information.
+
+Usually, the space used for snapshots is included in the space reported as
+"used". If snapshot information is collected as well, the space used for
+snapshots is subtracted from the used space.
+
+To make things even more interesting, it is possible to reserve space to be
+used for snapshots. If the space required for snapshots is less than that
+reserved space, there is "reserved free" and "reserved used" space in addition
+to "free" and "used". If the space required for snapshots exceeds the reserved
+space, that part allocated in the normal space is subtracted from the "used"
+space again.
Repeat this option to specify multiple volumes.
1800 seconds, but setting this to 86400 seconds (one day) will not do much harm
either.
+=item B<ReportStats> B<true>|B<false>
+
+The network plugin cannot only receive and send statistics, it can also create
+statistics about itself. Collected data included the number of received and
+sent octets and packets, the length of the receive queue and the number of
+values handled. When set to B<true>, the I<Network plugin> will make these
+statistics available. Defaults to B<false>.
+
=back
=head2 Plugin C<nginx>
Specifies the location of the status file.
+=item B<Compression> B<true>|B<false>
+
+Sets whether or not statistics about the compression used by OpenVPN should be
+collected. This information is only available in I<single> mode. Enabled by
+default.
+
=back
=head2 Plugin C<oracle>
Select more detailed statistics of processes matching this name. The statistics
collected for these selected processes are size of the resident segment size
(RSS), user- and system-time used, number of processes and number of threads,
-and minor and major pagefaults.
+io data (where available) and minor and major pagefaults.
=item B<ProcessMatch> I<name> I<regex>
usually), the graph will be empty (NAN) for a long time. People may not
understand why.
+=item B<hashed>
+
+Calculates a hash value of the host name and matches values according to that
+hash value. This makes it possible to divide all hosts into groups and match
+only values that are in a specific group. The intended use is in load
+balancing, where you want to handle only part of all data and leave the rest
+for other servers.
+
+The hashing function used tries to distribute the hosts evenly. First, it
+calculates a 32E<nbsp>bit hash value using the characters of the hostname:
+
+ hash_value = 0;
+ for (i = 0; host[i] != 0; i++)
+ hash_value = (hash_value * 251) + host[i];
+
+The constant 251 is a prime number which is supposed to make this hash value
+more random. The code then checks the group for this host according to the
+I<Total> and I<Match> arguments:
+
+ if ((hash_value % Total) == Match)
+ matches;
+ else
+ does not match;
+
+Please note that when you set I<Total> to two (i.E<nbsp>e. you have only two
+groups), then the least significant bit of the hash value will be the XOR of
+all least significant bits in the host name. One consequence is that when you
+have two hosts, "server0.example.com" and "server1.example.com", where the host
+name differs in one digit only and the digits differ by one, those hosts will
+never end up in the same group.
+
+Available options:
+
+=over 4
+
+=item B<Match> I<Match> I<Total>
+
+Divide the data into I<Total> groups and match all hosts in group I<Match> as
+described above. The groups are numbered from zero, i.E<nbsp>e. I<Match> must
+be smaller than I<Total>. I<Total> must be at least one, although only values
+greater than one really do make any sense.
+
+You can repeat this option to match multiple groups, for example:
+
+ Match 3 7
+ Match 5 7
+
+The above config will divide the data into seven groups and match groups three
+and five. One use would be to keep every value on two hosts so that if one
+fails the missing data can later be reconstructed from the second host.
+
+=back
+
+Example:
+
+ # Operate on the pre-cache chain, so that ignored values are not even in the
+ # global cache.
+ <Chain "PreCache">
+ <Rule>
+ <Match "hashed">
+ # Divide all received hosts in seven groups and accept all hosts in
+ # group three.
+ Match 3 7
+ </Match>
+ # If matched: Return and continue.
+ Target "return"
+ </Rule>
+ # If not matched: Return and stop.
+ Target "stop"
+ </Chain>
+
=back
=head2 Available targets