=over 4
-=item
+=item *
The I<Type> cannot be left unspecified, because it is not reasonable to add
apples to oranges. Also, the internal lookup structure won't work if you try
to group by type.
-=item
+=item *
There must be at least one unspecified, ungrouped field. Otherwise nothing
will be aggregated.
=over 4
-=item
+=item *
foo.example.com/cpu-even-average/cpu-idle
-=item
+=item *
foo.example.com/cpu-even-average/cpu-system
-=item
+=item *
foo.example.com/cpu-even-average/cpu-user
-=item
+=item *
...
=back
+=head2 Plugin C<chrony>
+
+The C<chrony> plugin collects ntp data from a B<chronyd> server, such as clock
+skew and per-peer stratum.
+
+For talking to B<chronyd>, it mimics what the B<chronyc> control program does
+on the wire.
+
+Available configuration options for the C<chrony> plugin:
+
+=over 4
+
+=item B<Host> I<Hostname>
+
+Hostname of the host running B<chronyd>. Defaults to B<localhost>.
+
+=item B<Port> I<Port>
+
+UDP-Port to connect to. Defaults to B<323>.
+
+=item B<Timeout> I<Timeout>
+
+Connection timeout in seconds. Defaults to B<2>.
+
+=back
+
=head2 Plugin C<conntrack>
This plugin collects IP conntrack statistics.
=over 4
-=item
+=item *
Sum, per-state, over all CPUs installed in the system; and
-=item
+=item *
Sum, per-CPU, over all non-idle states of a CPU, creating an "active" state.
=back
+=head2 Plugin C<dpdkstat>
+
+The I<dpdkstat plugin> collects information about DPDK interfaces using the
+extended NIC stats API in DPDK.
+
+B<Synopsis:>
+
+ <Plugin "dpdkstat">
+ Coremask "0x4"
+ MemoryChannels "4"
+ ProcessType "secondary"
+ FilePrefix "rte"
+ EnabledPortMask 0xffff
+ PortName "interface1"
+ PortName "interface2"
+ </Plugin>
+
+B<Options:>
+
+=over 4
+
+=item B<Coremask> I<Mask>
+
+A string containing an hexadecimal bit mask of the cores to run on. Note that
+core numbering can change between platforms and should be determined beforehand.
+
+=item B<Memorychannels> I<Channels>
+
+A string containing a number of memory channels per processor socket.
+
+=item B<ProcessType> I<type>
+
+A string containing the type of DPDK process instance.
+
+=item B<FilePrefix> I<File>
+
+The prefix text used for hugepage filenames. The filename will be set to
+/var/run/.<prefix>_config where prefix is what is passed in by the user.
+
+=item B<SocketMemory> I<MB>
+
+A string containing amount of Memory to allocate from hugepages on specific
+sockets in MB
+
+=item B<EnabledPortMask> I<Mask>
+
+A hexidecimal bit mask of the DPDK ports which should be enabled. A mask
+of 0x0 means that all ports will be disabled. A bitmask of all Fs means
+that all ports will be enabled. This is an optional argument - default
+is all ports enabled.
+
+=item B<PortName> I<Name>
+
+A string containing an optional name for the enabled DPDK ports. Each PortName
+option should contain only one port name; specify as many PortName options as
+desired. Default naming convention will be used if PortName is blank. If there
+are less PortName options than there are enabled ports, the default naming
+convention will be used for the additional ports.
+
+=back
+
=head2 Plugin C<email>
=over 4
=head2 Plugin C<ntpd>
-The C<ntpd> plugin collects per-peer ntpd data such as time offset and time
+The C<ntpd> plugin collects per-peer ntp data such as time offset and time
dispersion.
For talking to B<ntpd>, it mimics what the B<ntpdc> control program does on
-wire - using B<mode 7> specific requests. This mode is deprecated with
+the wire - using B<mode 7> specific requests. This mode is deprecated with
newer B<ntpd> releases (4.2.7p230 and later). For the C<ntpd> plugin to work
correctly with them, the ntp daemon must be explicitly configured to
enable B<mode 7> (which is disabled by default). Refer to the I<ntp.conf(5)>
set to B<false>, B<only> matching disks will be collected. If B<IgnoreSelected>
is set to B<true>, all disks are collected B<except> the ones matched.
+=item B<IgnoreSleepMode> B<true>|B<false>
+
+Normally, the C<smart> plugin will ignore disks that are reported to be asleep.
+This option disables the sleep mode check and allows the plugin to collect data
+from these disks anyway. This is useful in cases where libatasmart mistakenly
+reports disks as asleep because it has not been updated to incorporate support
+for newer idle states in the ATA spec.
+
+=item B<UseSerial> B<true>|B<false>
+
+A disk's kernel name (e.g., sda) can change from one boot to the next. If this
+option is enabled, the C<smart> plugin will use the disk's serial number (e.g.,
+HGST_HUH728080ALE600_2EJ8VH8X) instead of the kernel name as the key for
+storing data. This ensures that the data for a given disk will be kept together
+even if the kernel name changes.
+
=back
=head2 Plugin C<snmp>
=over 4
-=item
+=item *
Check I</etc/uuid> (or I<UUIDFile>).
-=item
+=item *
Check for UUID from HAL (L<http://www.freedesktop.org/wiki/Software/hal>) if
present.
-=item
+=item *
Check for UUID from C<dmidecode> / SMBIOS.
-=item
+=item *
Check for UUID from Xen hypervisor.
attempt to figure out the remote SSL protocol version. See
L<curl_easy_setopt(3)> for more details.
-=item B<Format> B<Command>|B<JSON>
+=item B<Format> B<Command>|B<JSON>|B<KAIROSDB>
Format of the output to generate. If set to B<Command>, will create output that
is understood by the I<Exec> and I<UnixSock> plugins. When set to B<JSON>, will
-create output in the I<JavaScript Object Notation> (JSON).
+create output in the I<JavaScript Object Notation> (JSON). When set to KAIROSDB
+, will create output in the KairosDB format.
Defaults to B<Command>.
projects / collectd.git / blobdiff