The syntax of this config file is similar to the config file of the famous
I<Apache> webserver. Each line contains either an option (a key and a list of
one or more values) or a section-start or -end. Empty lines and everything
-after a non-quoted hash-symbol (C<#>) is ignored. I<Keys> are unquoted
+after a non-quoted hash-symbol (C<#>) are ignored. I<Keys> are unquoted
strings, consisting only of alphanumeric characters and the underscore (C<_>)
character. Keys are handled case insensitive by I<collectd> itself and all
plugins included with it. I<Values> can either be an I<unquoted string>, a
=item B<BaseDir> I<Directory>
-Sets the base directory. This is the directory beneath all RRD-files are
+Sets the base directory. This is the directory beneath which all RRD-files are
created. Possibly more subdirectories are created. This is also the working
directory for the daemon.
Only the first B<LoadPlugin> statement or block for a given plugin name has any
effect. This is useful when you want to split up the configuration into smaller
files and want each file to be "self contained", i.e. it contains a B<Plugin>
-block I<and> then appropriate B<LoadPlugin> statement. The downside is that if
+block I<and> the appropriate B<LoadPlugin> statement. The downside is that if
you have multiple conflicting B<LoadPlugin> blocks, e.g. when they specify
different intervals, only one of them (the first one encountered) will take
effect and all others will be silently ignored.
=item B<Interval> I<Seconds>
Sets a plugin-specific interval for collecting metrics. This overrides the
-global B<Interval> setting. If a plugin provides own support for specifying an
-interval, that setting will take precedence.
+global B<Interval> setting. If a plugin provides its own support for specifying
+an interval, that setting will take precedence.
+
+=item B<FlushInterval> I<Seconds>
+
+Specifies the interval, in seconds, to call the flush callback if it's
+defined in this plugin. By default, this is disabled.
+
+=item B<FlushTimeout> I<Seconds>
+
+Specifies the value of the timeout argument of the flush callback.
=back
=back
-If more than one files are included by a single B<Include> option, the files
+If more than one file is included by a single B<Include> option, the files
will be included in lexicographical order (as defined by the C<strcmp>
function). Thus, you can e.E<nbsp>g. use numbered prefixes to specify the
order in which the files are loaded.
=item B<MaxReadInterval> I<Seconds>
-Read plugin doubles interval between queries after each failed attempt
+A read plugin doubles the interval between queries after each failed attempt
to get data.
This options limits the maximum value of the interval. The default value is
The I<AMQP plugin> can be used to communicate with other instances of
I<collectd> or third party applications using an AMQP message broker. Values
are sent to or received from the broker, which handles routing, queueing and
-possibly filtering or messages.
+possibly filtering out messages.
+
+B<Synopsis:>
<Plugin "amqp">
# Send values to an AMQP broker
TCP-Port to connect to. Defaults to B<3551>.
-=item B<ReportSeconds> B<true|false>
+=item B<ReportSeconds> B<true>|B<false>
If set to B<true>, the time reported in the C<timeleft> metric will be
converted to seconds. This is the recommended setting. If set to B<false>, the
default for backwards compatibility, the time will be reported in minutes.
+=item B<PersistentConnection> B<true>|B<false>
+
+By default, the plugin will try to keep the connection to UPS open between
+reads. Since this appears to be somewhat brittle (I<apcupsd> appears to close
+the connection due to inactivity quite quickly), the plugin will try to detect
+this problem and switch to an open-read-close mode in such cases.
+
+You can instruct the plugin to close the connection after each read by setting
+this option to B<false>.
+
=back
=head2 Plugin C<aquaero>
</Query>
<Database "product_information">
Driver "mysql"
+ Interval 120
DriverOption "host" "localhost"
DriverOption "username" "collectd"
DriverOption "password" "aZo6daiw"
=over 4
+=item B<Interval> I<Interval>
+
+Sets the interval (in seconds) in which the values will be collected from this
+database. By default the global B<Interval> setting will be used.
+
=item B<Driver> I<Driver>
Specifies the driver to use to connect to the database. In many cases those
=item B<IgnoreSelected> I<true>|I<false>
-If no configuration if given, the B<traffic>-plugin will collect data from
+If no configuration if given, the B<interface>-plugin will collect data from
all interfaces. This may not be practical, especially for loopback- and
similar interfaces. Thus, you can use the B<Interface>-option to pick the
interfaces you're interested in. Sometimes, however, it's easier/preferred
at least one digit.
+=item B<UniqueName> I<true>|I<false>
+
+Interface name is not unique on Solaris (KSTAT), interface name is unique
+only within a module/instance. Following tuple is considered unique:
+ (ks_module, ks_instance, ks_name)
+If this option is set to true, interface name contains above three fields
+separated by an underscore. For more info on KSTAT, visit
+L<http://docs.oracle.com/cd/E23824_01/html/821-1468/kstat-3kstat.html#REFMAN3Ekstat-3kstat>
+
+This option is only available on Solaris.
+
=back
=head2 Plugin C<ipmi>
=back
+=head2 Plugin C<mqtt>
+
+The I<MQTT plugin> can send metrics to MQTT (B<Publish> blocks) and receive
+values from MQTT (B<Subscribe> blocks).
+
+B<Synopsis:>
+
+ <Plugin mqtt>
+ <Publish "name">
+ Host "mqtt.example.com"
+ Prefix "collectd"
+ </Publish>
+ <Subscribe "name">
+ Host "mqtt.example.com"
+ Topic "collectd/#"
+ </Subscribe>
+ </Plugin>
+
+The plugin's configuration is in B<Publish> and/or B<Subscribe> blocks,
+configuring the sending and receiving direction respectively. The plugin will
+register a write callback named C<mqtt/I<name>> where I<name> is the string
+argument given to the B<Publish> block. Both types of blocks share many but not
+all of the following options. If an option is valid in only one of the blocks,
+it will be mentioned explicitly.
+
+B<Options:>
+
+=over 4
+
+=item B<Host> I<Hostname>
+
+Hostname of the MQTT broker to connect to.
+
+=item B<Port> I<Service>
+
+Port number or service name of the MQTT broker to connect to.
+
+=item B<User> I<UserName>
+
+Username used when authenticating to the MQTT broker.
+
+=item B<Password> I<Password>
+
+Password used when authenticating to the MQTT broker.
+
+=item B<ClientId> I<ClientId>
+
+MQTT client ID to use. Defaults to the hostname used by I<collectd>.
+
+=item B<QoS> [B<0>-B<2>]
+
+Sets the I<Quality of Service>, with the values C<0>, C<1> and C<2> meaning:
+
+=over 4
+
+=item B<0>
+
+At most once
+
+=item B<1>
+
+At least once
+
+=item B<2>
+
+Exactly once
+
+=back
+
+In B<Publish> blocks, this option determines the QoS flag set on outgoing
+messages and defaults to B<0>. In B<Subscribe> blocks, determines the maximum
+QoS setting the client is going to accept and defaults to B<2>. If the QoS flag
+on a message is larger than the maximum accepted QoS of a subscriber, the
+message's QoS will be downgraded.
+
+=item B<Prefix> I<Prefix> (Publish only)
+
+This plugin will use one topic per I<value list> which will looks like a path.
+I<Prefix> is used as the first path element and defaults to B<collectd>.
+
+An example topic name would be:
+
+ collectd/cpu-0/cpu-user
+
+=item B<Retain> B<false>|B<true> (Publish only)
+
+Controls whether the MQTT broker will retain (keep a copy of) the last message
+sent to each topic and deliver it to new subscribers. Defaults to B<false>.
+
+=item B<StoreRates> B<true>|B<false> (Publish only)
+
+Controls whether C<DERIVE> and C<COUNTER> metrics are converted to a I<rate>
+before sending. Defaults to B<true>.
+
+=item B<CleanSession> B<true>|B<false> (Subscribe only)
+
+Controls whether the MQTT "cleans" the session up after the subscriber
+disconnects or if it maintains the subscriber's subscriptions and all messages
+that arrive while the subscriber is disconnected. Defaults to B<true>.
+
+=item B<Topic> I<TopicName> (Subscribe only)
+
+Configures the topic(s) to subscribe to. You can use the single level C<+> and
+multi level C<#> wildcards. Defaults to B<collectd/#>, i.e. all topics beneath
+the B<collectd> branch.
+
+=item B<CACert> I<file>
+
+Path to the PEM-encoded CA certificate file. Setting this option enables TLS
+communication with the MQTT broker, and as such, B<Port> should be the TLS-enabled
+port of the MQTT broker.
+A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+
+=item B<CertificateFile> I<file>
+
+Path to the PEM-encoded certificate file to use as client certificate when
+connecting to the MQTT broker.
+A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+
+=item B<CertificateKeyFile> I<file>
+
+Path to the unencrypted PEM-encoded key file corresponding to B<CertificateFile>.
+A valid TLS configuration requires B<CACert>, B<CertificateFile> and B<CertificateKeyFile>.
+
+=item B<TLSProtocol> I<protocol>
+
+If configured, this specifies the string protocol version (e.g. C<tlsv1>,
+C<tlsv1.2>) to use for the TLS connection to the broker. If not set a default
+version is used which depends on the version of OpenSSL the Mosquitto library
+was linked against.
+
+=item B<CipherSuite> I<ciphersuite>
+
+A string describing the ciphers available for use. See L<ciphers(1)> and the
+C<openssl ciphers> utility for more information. If unset, the default ciphers
+will be used.
+
+
+=back
+
=head2 Plugin C<mysql>
The C<mysql plugin> requires B<mysqlclient> to be installed. It connects to
=back
+=head2 Plugin C<notify_nagios>
+
+The I<notify_nagios> plugin writes notifications to Nagios' I<command file> as
+a I<passive service check result>.
+
+Available configuration options:
+
+=over 4
+
+=item B<CommandFile> I<Path>
+
+Sets the I<command file> to write to. Defaults to F</usr/local/nagios/var/rw/nagios.cmd>.
+
+=back
+
=head2 Plugin C<ntpd>
+The C<ntpd> plugin collects per-peer ntpd data such as time offset and time
+dispersion.
+
+For talking to B<ntpd>, it mimics what the B<ntpdc> control program does on
+wire - using B<mode 7> specific requests. This mode is deprecated with
+newer B<ntpd> releases (4.2.7p230 and later). For the C<ntpd> plugin to work
+correctly with them, the ntp daemon must be explicitly configured to
+enable B<mode 7> (which is disabled by default). Refer to the I<ntp.conf(5)>
+manual page for details.
+
+Available configuration options for the C<ntpd> plugin:
+
=over 4
=item B<Host> I<Hostname>
Sets the URL to use to connect to the I<OpenLDAP> server. This option is
I<mandatory>.
+=item B<BindDN> I<BindDN>
+
+Name in the form of an LDAP distinguished name intended to be used for
+authentication. Defaults to empty string to establish an anonymous authorization.
+
+=item B<Password> I<Password>
+
+Password for simple bind authentication. If this option is not set,
+unauthenticated bind operation is used.
+
=item B<StartTLS> B<true|false>
Defines whether TLS must be used when connecting to the I<OpenLDAP> server.
Sets the Time-To-Live of generated ICMP packets.
+=item B<Size> I<size>
+
+Sets the size of the data payload in ICMP packet to specified I<size> (it
+will be filled with regular ASCII pattern). If not set, default 56 byte
+long string is used so that the packet size of an ICMPv4 packet is exactly
+64 bytes, similar to the behaviour of normal ping(1) command.
+
=item B<SourceAddress> I<host>
Sets the source address to use. I<host> may either be a numerical network
allows to "group" several processes together. I<name> must not contain
slashes.
+=item B<CollectContextSwitch> I<Boolean>
+
+Collect context switch of the process.
+
=back
=head2 Plugin C<protocols>
are unchanged. If set to B<True>, the such metrics are not dispatched and
removed from the internal cache.
+=item B<CounterSum> B<false>|B<true>
+
+When enabled, creates a C<count> metric which reports the change since the last
+read. This option primarily exists for compatibility with the I<statsd>
+implementation by Etsy.
+
=item B<TimerPercentile> I<Percent>
Calculate and dispatch the configured percentile, i.e. compute the latency, so
=item B<DigitalTemperatureSensor> I<true>|I<false>
Boolean enabling the collection of the temperature of each core.
-This option should only be used if the automated detectionfails or
+This option should only be used if the automated detectionfails or
if you want to disable this feature.
=item B<DigitalTemperatureSensor> I<true>|I<false>
Boolean enabling the collection of the temperature of each package.
-This option should only be used if the automated detectionfails or
+This option should only be used if the automated detectionfails or
if you want to disable this feature.
=item B<TCCActivationTemp> I<Temperature>
B<address> means use the interface's mac address. This is useful since the
interface path might change between reboots of a guest or across migrations.
-=item B<PluginInstanceFormat> B<name|uuid>
+=item B<PluginInstanceFormat> B<name|uuid|none>
When the virt plugin logs data, it sets the plugin_instance of the collected
-data according to this setting. The default is to use the guest name as provided
-by the hypervisor, which is equal to setting B<name>.
+data according to this setting. The default is to not set the plugin_instance.
+B<name> means use the guest's name as provided by the hypervisor.
B<uuid> means use the guest's UUID.
-You can also specify combinations of these fields. For example B<name uuid>
-means to concatenate the guest name and UUID (with a literal colon character
-between, thus I<"foo:1234-1234-1234-1234">).
+You can also specify combinations of the B<name> and B<uuid> fields.
+For example B<name uuid> means to concatenate the guest name and UUID
+(with a literal colon character between, thus I<"foo:1234-1234-1234-1234">).
=back
Protocol to use when connecting to I<Graphite>. Defaults to C<tcp>.
+=item B<ReconnectInterval> I<Seconds>
+
+When set to non-zero, forces the connection to the Graphite backend to be
+closed and re-opend periodically. This behavior is desirable in environments
+where the connection to the Graphite backend is done through load balancers,
+for example. When set to zero, the default, the connetion is kept open for as
+long as possible.
+
=item B<LogSendErrors> B<false>|B<true>
If set to B<true> (the default), logs errors when sending data to I<Graphite>.
all the data in the current send buffer will probably be lost. Defaults to 0,
which means the connection never times out.
+=item B<LogHttpError> B<false>|B<true>
+
+Enables printing of HTTP error code to log. Turned off by default.
+
The C<write_http> plugin regularly submits the collected values to the HTTP
server. How frequently this happens depends on how much data you are collecting
and the size of B<BufferSize>. The optimal value to set B<Timeout> to is
Host "localhost"
Port "6379"
Timeout 1000
+ Prefix "collectd/"
+ Database 1
+ MaxSetSize -1
+ StoreRates true
</Node>
</Plugin>
Values are submitted to I<Sorted Sets>, using the metric name as the key, and
the timestamp as the score. Retrieving a date range can then be done using the
C<ZRANGEBYSCORE> I<Redis> command. Additionally, all the identifiers of these
-I<Sorted Sets> are kept in a I<Set> called C<collectd/values> and can be
-retrieved using the C<SMEMBERS> I<Redis> command. See
+I<Sorted Sets> are kept in a I<Set> called C<collectd/values> (or
+C<${prefix}/values> if the B<Prefix> option was specified) and can be retrieved
+using the C<SMEMBERS> I<Redis> command. You can specify the database to use
+with the B<Database> parameter (default is C<0>). See
L<http://redis.io/commands#sorted_set> and L<http://redis.io/commands#set> for
details.
The B<Timeout> option sets the socket connection timeout, in milliseconds.
+=item B<Prefix> I<Prefix>
+
+Prefix used when constructing the name of the I<Sorted Sets> and the I<Set>
+containing all metrics. Defaults to C<collectd/>, so metrics will have names
+like C<collectd/cpu-0/cpu-user>. When setting this to something different, it
+is recommended but not required to include a trailing slash in I<Prefix>.
+
+=item B<Database> I<Index>
+
+This index selects the redis database to use for writing operations. Defaults
+to C<0>.
+
+=item B<MaxSetSize> I<Items>
+
+The B<MaxSetSize> option limits the number of items that the I<Sorted Sets> can
+hold. Negative values for I<Items> sets no limit, which is the default behavior.
+
+=item B<StoreRates> B<true>|B<false>
+
+If set to B<true> (the default), convert counter values to rates. If set to
+B<false> counter values are stored as is, i.e. as an increasing integer number.
+
=back
=head2 Plugin C<write_riemann>
Service name or port number to connect to. Defaults to C<5555>.
-=item B<Protocol> B<UDP>|B<TCP>
+=item B<Protocol> B<UDP>|B<TCP>|B<TLS>
Specify the protocol to use when communicating with I<Riemann>. Defaults to
B<TCP>.
+=item B<TLSCertFile> I<Path>
+
+When using the B<TLS> protocol, path to a PEM certificate to present
+to remote host.
+
+=item B<TLSCAFile> I<Path>
+
+When using the B<TLS> protocol, path to a PEM CA certificate to
+use to validate the remote hosts's identity.
+
+=item B<TLSKeyFile> I<Path>
+
+When using the B<TLS> protocol, path to a PEM private key associated
+with the certificate defined by B<TLSCertFile>.
+
=item B<Batch> B<true>|B<false>
If set to B<true> and B<Protocol> is set to B<TCP>,
Maximum payload size for a riemann packet. Defaults to 8192
+=item B<BatchFlushTimeout> I<seconds>
+
+Maximum amount of seconds to wait in between to batch flushes.
+No timeout by default.
+
=item B<StoreRates> B<true>|B<false>
If set to B<true> (the default), convert counter values to rates. If set to