=item B<PostCacheChain> I<ChainName>
Configure the name of the "pre-cache chain" and the "post-cache chain". Please
-see L<FILTER CONFIGURATION> below on information on chains and how these
+see L</"FILTER CONFIGURATION"> below on information on chains and how these
setting change the daemon's behavior.
=back
collected or if they are ignored is controlled by the B<IgnoreSelected> option;
see below.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
Invert the selection: If set to true, all cgroups I<except> the ones that
Select partitions based on the devicename.
+See F</"IGNORELISTS"> for details.
+
=item B<MountPoint> I<Directory>
Select partitions based on the mountpoint.
+See F</"IGNORELISTS"> for details.
+
=item B<FSType> I<FSType>
Select partitions based on the filesystem type.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
Invert the selection: If set to true, all partitions B<except> the ones that
Disk "sdd"
Disk "/hda[34]/"
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
Sets whether selected disks, i.E<nbsp>e. the ones matches by any of the B<Disk>
Select this interface. By default these interfaces will then be collected. For
a more detailed description see B<IgnoreSelected> below.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
If no configuration if given, the B<interface>-plugin will collect data from
Selects sensors to collect or to ignore, depending on B<IgnoreSelected>.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
If no configuration if given, the B<ipmi> plugin will collect data from all
Select this irq. By default these irqs will then be collected. For a more
detailed description see B<IgnoreSelected> below.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
If no configuration if given, the B<irq>-plugin will collect data from all
the device, i.e. the name of the block device without the leading C</dev/>.
See B<IgnoreSelected> for more details.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
Invert device selection: If set to B<true>, all md devices B<except> those
If no volume was specified at all for either of the three options, that data
will be collected for all available volumes.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelectedIO> B<true>|B<false>
=item B<IgnoreSelectedOps> B<true>|B<false>
Filter "ppp0" "u32-1:0"
</Plugin>
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected>
The behavior is the same as with all other similar plugins: If nothing is
As there can be multiple devices on the bus you can list multiple sensor (use
multiple B<Sensor> elements).
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
If no configuration is given, the B<onewire> plugin will collect data from all
depends on the B<IgnoreSelected>. By default, only matched values are selected.
If no value is configured at all, all values will be selected.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
If set to B<true>, inverts the selection made by B<Value>, i.E<nbsp>e. all
I<it8712-isa-0290/voltage-in1>" will cause collectd to gather data for the
voltage sensor I<in1> of the I<it8712> on the isa bus at the address 0290.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
If no configuration if given, the B<sensors>-plugin will collect data from all
Disk "sdd"
Disk "/hda[34]/"
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> B<true>|B<false>
Sets whether selected disks, i.E<nbsp>e. the ones matches by any of the B<Disk>
depending on the value of the B<IgnoreSelected> option. This option may be
used multiple times to specify a list of devices.
+See F</"IGNORELISTS"> for details.
+
=item B<IgnoreSelected> I<true>|I<false>
Invert the selection: If set to true, all devices B<except> the ones that
=item B<Attribute> I<String> I<String>
-Only available for KAIROSDB output format.
+Only available for the KAIROSDB output format.
Consider the two given strings to be the key and value of an additional tag for
each metric being sent out.
You can add multiple B<Attribute>.
+=item B<TTL> I<Int>
+
+Only available for the KAIROSDB output format.
+
+Sets the Cassandra ttl for the data points.
+
+Please refer to L<http://kairosdb.github.io/docs/build/html/restapi/AddDataPoints.html?highlight=ttl>
+
=item B<Metrics> B<true>|B<false>
Controls whether I<metrics> are POSTed to this location. Defaults to B<true>.
Target "write"
</Chain>
+=head1 IGNORELISTS
+
+B<Ignorelists> are a generic framework to either ignore some metrics or report
+specific metircs only. Plugins usually provide one or more options to specify
+the items (mounts points, devices, ...) and the boolean option
+C<IgnoreSelected>.
+
+=over 4
+
+=item B<Select> I<String>
+
+Selects the item I<String>. This option often has a plugin specific name, e.g.
+B<Sensor> in the C<sensors> plugin. It is also plugin specific what this string
+is compared to. For example, the C<df> plugin's B<MountPoint> compares it to a
+mount point and the C<sensors> plugin's B<Sensor> compares it to a sensor name.
+
+By default, this option is doing a case-sensitive full-string match. The
+following config will match C<foo>, but not C<Foo>:
+
+ Select "foo"
+
+If I<String> starts and ends with C</> (a slash), the string is compiled as a
+I<regular expression>. For example, so match all item starting with C<foo>, use
+could use the following syntax:
+
+ Select "/^foo/"
+
+The regular expression is I<not> anchored, i.e. the following config will match
+C<foobar>, C<barfoo> and C<AfooZ>:
+
+ Select "/foo/"
+
+The B<Select> option may be repeated to select multiple items.
+
+=item B<IgnoreSelected> B<true>|B<false>
+
+If set to B<true>, matching metrics are I<ignored> and all other metrics are
+collected. If set to B<false>, matching metrics are I<collected> and all other
+metrics are ignored.
+
+=back
+
=head1 SEE ALSO
L<collectd(1)>,