either C<perl> or C<python>, the default is changed to enabled in order to keep
the average user from ever having to deal with this low level linking stuff.
+=item B<Interval> I<Seconds>
+
+Sets a plugin-specific interval for collecting metrics. This overrides the
+global B<Interval> setting. If a plugin provides own support for specifying an
+interval, that setting will take precedence.
+
=back
=item B<Include> I<Path>
require external configuration, too. The C<apache plugin>, for example,
required C<mod_status> to be configured in the webserver you're going to
collect data from. These plugins are listed below as well, even if they don't
-require any configuration within collectd's configfile.
+require any configuration within collectd's configuration file.
A list of all plugins and a short summary for each plugin can be found in the
F<README> file shipped with the sourcecode and hopefully binary packets as
well.
+=head2 Plugin C<aggregation>
+
+The I<Aggregation plugin> makes it possible to aggregate several values into
+one using aggregation functions such as I<sum>, I<average>, I<min> and I<max>.
+This can be put to a wide variety of uses, e.g. average and total CPU
+statistics for your entire fleet.
+
+The grouping is powerful but, as with many powerful tools, may be a bit
+difficult to wrap your head around. The grouping will therefore be
+demonstrated using an example: The average and sum of the CPU usage across
+all CPUs of each host is to be calculated.
+
+To select all the affected values for our example, set C<Plugin cpu> and
+C<Type cpu>. The other values are left unspecified, meaning "all values". The
+I<Host>, I<Plugin>, I<PluginInstance>, I<Type> and I<TypeInstance> options
+work as if they were specified in the C<WHERE> clause of an C<SELECT> SQL
+statement.
+
+ Plugin "cpu"
+ Type "cpu"
+
+Although the I<Host>, I<PluginInstance> (CPU number, i.e. 0, 1, 2, ...) and
+I<TypeInstance> (idle, user, system, ...) fields are left unspecified in the
+example, the intention is to have a new value for each host / type instance
+pair. This is achieved by "grouping" the values using the C<GroupBy> option.
+It can be specified multiple times to group by more than one field.
+
+ GroupBy "Host"
+ GroupBy "TypeInstance"
+
+We do neither specify nor group by I<plugin instance> (the CPU number), so all
+metrics that differ in the CPU number only will be aggregated. Each
+aggregation needs I<at least one> such field, otherwise no aggregation would
+take place.
+
+The full example configuration looks like this:
+
+ <Plugin "aggregation">
+ <Aggregation>
+ Plugin "cpu"
+ Type "cpu"
+
+ GroupBy "Host"
+ GroupBy "TypeInstance"
+
+ CalculateSum true
+ CalculateAverage true
+ </Aggregation>
+ </Plugin>
+
+There are a couple of limitations you should be aware of:
+
+=over 4
+
+=item
+
+The I<Type> cannot be left unspecified, because it is not reasonable to add
+apples to oranges. Also, the internal lookup structure won't work if you try
+to group by type.
+
+=item
+
+There must be at least one unspecified, ungrouped field. Otherwise nothing
+will be aggregated.
+
+=back
+
+As you can see in the example above, each aggregation has its own
+B<Aggregation> block. You can have multiple aggregation blocks and aggregation
+blocks may match the same values, i.e. one value list can update multiple
+aggregations. The following options are valid inside B<Aggregation> blocks:
+
+=over 4
+
+=item B<Host> I<Host>
+
+=item B<Plugin> I<Plugin>
+
+=item B<PluginInstance> I<PluginInstance>
+
+=item B<Type> I<Type>
+
+=item B<TypeInstance> I<TypeInstance>
+
+Selects the value lists to be added to this aggregation. B<Type> must be a
+valid data set name, see L<types.db(5)> for details.
+
+=item B<GroupBy> B<Host>|B<Plugin>|B<PluginInstance>|B<TypeInstance>
+
+Group valued by the specified field. The B<GroupBy> option may be repeated to
+group by multiple fields.
+
+=item B<CalculateNum> B<true>|B<false>
+
+=item B<CalculateSum> B<true>|B<false>
+
+=item B<CalculateAverage> B<true>|B<false>
+
+=item B<CalculateMinimum> B<true>|B<false>
+
+=item B<CalculateMaximum> B<true>|B<false>
+
+=item B<CalculateStddev> B<true>|B<false>
+
+Boolean options for enabling calculation of the number of value lists, their
+sum, average, minimum, maximum andE<nbsp>/ or standard deviation. All options
+are disabled by default.
+
+=back
+
=head2 Plugin C<amqp>
The I<AMQMP plugin> can be used to communicate with other instances of
# Persistent false
# Format "command"
# StoreRates false
+ # GraphitePrefix "collectd."
+ # GraphiteEscapeChar "_"
</Publish>
# Receive values from an AMQP broker
an easy and straight forward exchange format. The C<Content-Type> header field
will be set to C<application/json>.
+If set to B<Graphite>, values are encoded in the I<Graphite> format, which is
+"<metric> <value> <timestamp>\n". The C<Content-Type> header field will be set to
+C<text/graphite>.
+
A subscribing client I<should> use the C<Content-Type> header field to
determine how to decode the values. Currently, the I<AMQP plugin> itself can
only decode the B<Command> format.
Please note that currently this option is only used if the B<Format> option has
been set to B<JSON>.
+=item B<GraphitePrefix> (Publish and B<Format>=I<Graphite> only)
+
+A prefix can be added in the metric name when outputting in the I<Graphite> format.
+It's added before the I<Host> name.
+Metric name will be "<prefix><host><postfix><plugin><type><name>"
+
+=item B<GraphitePostfix> (Publish and B<Format>=I<Graphite> only)
+
+A postfix can be added in the metric name when outputting in the I<Graphite> format.
+It's added after the I<Host> name.
+Metric name will be "<prefix><host><postfix><plugin><type><name>"
+
+=item B<GraphiteEscapeChar> (Publish and B<Format>=I<Graphite> only)
+
+Specify a character to replace dots (.) in the host part of the metric name.
+In I<Graphite> metric name, dots are used as separators between different
+metric parts (host, plugin, type).
+Default is "_" (I<Underscore>).
+
=back
=head2 Plugin C<apache>
<Plugin "bind">
URL "http://localhost:8053/"
+ ParseTime false
OpCodes true
QTypes true
URL from which to retrieve the XML data. If not specified,
C<http://localhost:8053/> will be used.
-=item B<OpCodes> I<true>|I<false>
+=item B<ParseTime> B<true>|B<false>
+
+When set to B<true>, the time provided by BIND will be parsed and used to
+dispatch the values. When set to B<false>, the local time source is queried.
+
+This setting is set to B<true> by default for backwards compatibility; setting
+this to B<false> is I<recommended> to avoid problems with timezones and
+localization.
+
+=item B<OpCodes> B<true>|B<false>
When enabled, statistics about the I<"OpCodes">, for example the number of
C<QUERY> packets, are collected.
Default: Enabled.
-=item B<QTypes> I<true>|I<false>
+=item B<QTypes> B<true>|B<false>
When enabled, the number of I<incoming> queries by query types (for example
C<A>, C<MX>, C<AAAA>) is collected.
Default: Enabled.
-=item B<ServerStats> I<true>|I<false>
+=item B<ServerStats> B<true>|B<false>
Collect global server statistics, such as requests received over IPv4 and IPv6,
successful queries, and failed updates.
Default: Enabled.
-=item B<ZoneMaintStats> I<true>|I<false>
+=item B<ZoneMaintStats> B<true>|B<false>
Collect zone maintenance statistics, mostly information about notifications
(zone updates) and zone transfers.
Default: Enabled.
-=item B<ResolverStats> I<true>|I<false>
+=item B<ResolverStats> B<true>|B<false>
Collect resolver statistics, i.E<nbsp>e. statistics about outgoing requests
(e.E<nbsp>g. queries over IPv4, lame servers). Since the global resolver
=over 4
-=item B<QTypes> I<true>|I<false>
+=item B<QTypes> B<true>|B<false>
If enabled, the number of I<outgoing> queries by query type (e.E<nbsp>g. C<A>,
C<MX>) is collected.
Default: Enabled.
-=item B<ResolverStats> I<true>|I<false>
+=item B<ResolverStats> B<true>|B<false>
Collect resolver statistics, i.E<nbsp>e. statistics about outgoing requests
(e.E<nbsp>g. queries over IPv4, lame servers).
Default: Enabled.
-=item B<CacheRRSets> I<true>|I<false>
+=item B<CacheRRSets> B<true>|B<false>
If enabled, the number of entries (I<"RR sets">) in the view's cache by query
type is collected. Negative entries (queries which resulted in an error, for
=back
+=head2 Plugin C<ethstat>
+
+The I<ethstat plugin> collects information about network interface cards (NICs)
+by talking directly with the underlying kernel driver using L<ioctl(2)>.
+
+B<Synopsis:>
+
+ <Plugin "ethstat">
+ Interface "eth0"
+ Map "rx_csum_offload_errors" "if_rx_errors" "checksum_offload"
+ Map "multicast" "if_multicast"
+ </Plugin>
+
+B<Options:>
+
+=over 4
+
+=item B<Interface> I<Name>
+
+Collect statistical information about interface I<Name>.
+
+=item B<Map> I<Name> I<Type> [I<TypeInstance>]
+
+By default, the plugin will submit values as type C<derive> and I<type
+instance> set to I<Name>, the name of the metric as reported by the driver. If
+an appropriate B<Map> option exists, the given I<Type> and, optionally,
+I<TypeInstance> will be used.
+
+=item B<MappedOnly> B<true>|B<false>
+
+When set to B<true>, only metrics that can be mapped to to a I<type> will be
+collected, all other metrics will be ignored. Defaults to B<false>.
+
+=back
+
=head2 Plugin C<exec>
Please make sure to read L<collectd-exec(5)> before using this plugin. It
=back
+=head2 Plugin C<md>
+
+The C<md plugin> collects information from Linux Software-RAID devices (md).
+
+All reported values are of the type C<md_disks>. Reported type instances are
+I<active>, I<failed> (present but not operational), I<spare> (hot stand-by) and
+I<missing> (physically absent) disks.
+
+=over 4
+
+=item B<Device> I<Device>
+
+Select md devices based on device name. The I<device name> is the basename of
+the device, i.e. the name of the block device without the leading C</dev/>.
+See B<IgnoreSelected> for more details.
+
+=item B<IgnoreSelected> B<true>|B<false>
+
+Invert device selection: If set to B<true>, all md devices B<except> those
+listed using B<Device> are collected. If B<false> (the default), only those
+listed are collected. If no configuration is given, the B<md> plugin will
+collect data from all md devices.
+
+=back
+
=head2 Plugin C<memcachec>
The C<memcachec plugin> connects to a memcached server, queries one or more
about cache utilization, memory and bandwidth used.
L<http://www.danga.com/memcached/>
+ <Plugin "memcached">
+ <Instance "name">
+ Host "memcache.example.com"
+ Port 11211
+ </Instance>
+ </Plugin>
+
+The plugin configuration consists of one or more B<Instance> blocks which
+specify one I<memcached> connection each. Within the B<Instance> blocks, the
+following options are allowed:
+
=over 4
=item B<Host> I<Hostname>
TCP-Port to connect to. Defaults to B<11211>.
+=item B<Socket> I<Path>
+
+Connect to I<memcached> using the UNIX domain socket at I<Path>. If this
+setting is given, the B<Host> and B<Port> settings are ignored.
+
=back
=head2 Plugin C<modbus>
B<RegisterType> has been set to B<Uint32> or B<Float>, this and the next
register will be read (the register number is increased by one).
-=item B<RegisterType> B<Uint16>|B<Uint32>|B<Float>
+=item B<RegisterType> B<Int16>|B<Int32>|B<Uint16>|B<Uint32>|B<Float>
-Specifies what kind of data is returned by the device. If the type is B<Uint32>
-or B<Float>, two 16E<nbsp>bit registers will be read and the data is combined
-into one value. Defaults to B<Uint16>.
+Specifies what kind of data is returned by the device. If the type is B<Int32>,
+B<Uint32> or B<Float>, two 16E<nbsp>bit registers will be read and the data is
+combined into one value. Defaults to B<Uint16>.
=item B<Type> I<Type>
lookups. The default is to do reverse lookups to preserve backwards
compatibility, though.
+=item B<IncludeUnitID> B<true>|B<false>
+
+When a peer is a refclock, include the unit ID in the I<type instance>.
+Defaults to B<false> for backward compatibility.
+
+If two refclock peers use the same driver and this is B<false>, the plugin will
+try to write simultaneous measurements from both to the same type instance.
+This will result in error messages in the log and only one set of measurements
+making it through.
+
=back
=head2 Plugin C<nut>
Defines the "database alias" or "service name" to connect to. Usually, these
names are defined in the file named C<$ORACLE_HOME/network/admin/tnsnames.ora>.
+=item B<Host> I<Host>
+
+Hostname to use when dispatching values for this database. Defaults to using
+the global hostname of the I<collectd> instance.
+
=item B<Username> I<Username>
Username used for authentication.
The name of the database of the current connection.
+=item I<instance>
+
+The name of the database plugin instance. See the B<Instance> option of the
+database specification below for details.
+
=item I<username>
The username used to connect to the database.
Specify whether to use an SSL connection when contacting the server. The
following modes are supported:
+=item B<Instance> I<name>
+
+Specify the plugin instance name that should be used instead of the database
+name (which is the default, if this option has not been specified). This
+allows to query multiple databases of the same name on the same host (e.g.
+when running multiple database server versions in parallel).
+
=over 4
=item I<disable>
connections. Either a service name of a port number may be given. Please note
that numerical port numbers must be given as a string, too.
+=item B<Password> I<Password>
+
+Use I<Password> to authenticate when connecting to I<Redis>.
+
=item B<Timeout> I<Timeout in miliseconds>
The B<Timeout> option set the socket timeout for node response. Since the Redis
locally, or B<DataDir> is set to a relative path, this will not work as
expected. Default is B<true>.
+=item B<StepSize> I<Seconds>
+
+B<Force> the stepsize of newly created RRD-files. Ideally (and per default)
+this setting is unset and the stepsize is set to the interval in which the data
+is collected. Do not use this option unless you absolutely have to for some
+reason. Setting this option may cause problems with the C<snmp plugin>, the
+C<exec plugin> or when the daemon is set up to receive data from other hosts.
+
+=item B<HeartBeat> I<Seconds>
+
+B<Force> the heartbeat of newly created RRD-files. This setting should be unset
+in which case the heartbeat is set to twice the B<StepSize> which should equal
+the interval in which data is collected. Do not set this option unless you have
+a very good reason to do so.
+
+=item B<RRARows> I<NumRows>
+
+The C<rrdtool plugin> calculates the number of PDPs per CDP based on the
+B<StepSize>, this setting and a timespan. This plugin creates RRD-files with
+three times five RRAs, i. e. five RRAs with the CFs B<MIN>, B<AVERAGE>, and
+B<MAX>. The five RRAs are optimized for graphs covering one hour, one day, one
+week, one month, and one year.
+
+So for each timespan, it calculates how many PDPs need to be consolidated into
+one CDP by calculating:
+ number of PDPs = timespan / (stepsize * rrarows)
+
+Bottom line is, set this no smaller than the width of you graphs in pixels. The
+default is 1200.
+
+=item B<RRATimespan> I<Seconds>
+
+Adds an RRA-timespan, given in seconds. Use this option multiple times to have
+more then one RRA. If this option is never used, the built-in default of (3600,
+86400, 604800, 2678400, 31622400) is used.
+
+For more information on how RRA-sizes are calculated see B<RRARows> above.
+
+=item B<XFF> I<Factor>
+
+Set the "XFiles Factor". The default is 0.1. If unsure, don't set this option.
+I<Factor> must be in the range C<[0.0-1.0)>, i.e. between zero (inclusive) and
+one (exclusive).
+
=back
=head2 Plugin C<rrdtool>
=item B<XFF> I<Factor>
Set the "XFiles Factor". The default is 0.1. If unsure, don't set this option.
+I<Factor> must be in the range C<[0.0-1.0)>, i.e. between zero (inclusive) and
+one (exclusive).
=item B<CacheFlush> I<Seconds>
=over 4
+=item B<SensorConfigFile> I<File>
+
+Read the I<lm_sensors> configuration from I<File>. When unset (recommended),
+the library's default will be used.
+
=item B<Sensor> I<chip-bus-address/type-feature>
Selects the name of the sensor which you want to collect or ignore, depending
=head2 Plugin C<swap>
The I<Swap plugin> collects information about used and available swap space. On
-I<Solaris>, the following options are available:
+I<Linux> and I<Solaris>, the following options are available:
=over 4
=item B<ReportByDevice> B<false>|B<true>
-Configures how to report physical swap devices. If set to B<false> is used (the
+Configures how to report physical swap devices. If set to B<false> (the
default), the summary over all swap devices is reported only, i.e. the globally
used and available space over all devices. If B<true> is configured, the used
and available space of each device will be reported separately.
-This option is only available if the I<Swap plugin> can use the L<swapctl(2)>
-mechanism under I<Solaris>.
+This option is only available if the I<Swap plugin> can read C</proc/swaps>
+(under Linux) or use the L<swapctl(2)> mechanism (under I<Solaris>).
+
+=item B<ReportBytes> B<false>|B<true>
+
+When enabled, the I<swap I/O> is reported in bytes. When disabled, the default,
+I<swap I/O> is reported in pages. This option is available under Linux only.
=back
Please note that B<debug> is only available if collectd has been compiled with
debugging support.
+=item B<NotifyLevel> B<OKAY>|B<WARNING>|B<FAILURE>
+
+Controls which notifications should be sent to syslog. The default behaviour is
+not to send any. Less severe notifications always imply logging more severe
+notifications: Setting this to B<OKAY> means all notifications will be sent to
+syslog, setting this to B<WARNING> will send B<WARNING> and B<FAILURE>
+notifications but will dismiss B<OKAY> notifications. Setting this option to
+B<FAILURE> will only send failures to syslog.
+
=back
=head2 Plugin C<table>
collect on-wire traffic you could, for example, use the logging facilities of
iptables to feed data for the guest IPs into the iptables plugin.
+=head2 Plugin C<write_graphite>
+
+The C<write_graphite> plugin writes data to I<Graphite>, an open-source metrics
+storage and graphing project. The plugin connects to I<Carbon>, the data layer
+of I<Graphite>, and sends data via the "line based" protocol (per default using
+portE<nbsp>2003). The data will be sent in blocks of at most 1428 bytes to
+minimize the number of network packets.
+
+Synopsis:
+
+ <Plugin write_graphite>
+ <Carbon>
+ Host "localhost"
+ Port "2003"
+ Prefix "collectd"
+ </Carbon>
+ </Plugin>
+
+=over 4
+
+=item B<Host> I<Address>
+
+Hostname or address to connect to. Defaults to C<localhost>.
+
+=item B<Port> I<Service>
+
+Service name or port number to connect to. Defaults to C<2003>.
+
+=item B<Prefix> I<String>
+
+When set, I<String> is added in front of the host name. Dots and whitespace are
+I<not> escaped in this string (see B<EscapeCharacter> below).
+
+=item B<Postfix> I<String>
+
+When set, I<String> is appended to the host name. Dots and whitespace are
+I<not> escaped in this string (see B<EscapeCharacter> below).
+
+=item B<EscapeCharacter> I<Char>
+
+I<Carbon> uses the dot (C<.>) as escape character and doesn't allow whitespace
+in the identifier. The B<EscapeCharacter> option determines which character
+dots, whitespace and control characters are replaced with. Defaults to
+underscore (C<_>).
+
+=item B<StoreRates> B<false>|B<true>
+
+If set to B<true> (the default), convert counter values to rates. If set to
+B<false> counter values are stored as is, i.E<nbsp>e. as an increasing integer
+number.
+
+=item B<SeparateInstances> B<false>|B<true>
+
+If set to B<true>, the plugin instance and type instance will be in their own
+path component, for example C<host.cpu.0.cpu.idle>. If set to B<false> (the
+default), the plugin and plugin instance (and likewise the type and type
+instance) are put into one component, for example C<host.cpu-0.cpu-idle>.
+
+=item B<AlwaysAppendDS> B<false>|B<true>
+
+If set the B<true>, append the name of the I<Data Source> (DS) to the "metric"
+identifier. If set to B<false> (the default), this is only done when there is
+more than one DS.
+
+=back
+
+=head2 Plugin C<write_mongodb>
+
+The I<write_mongodb plugin> will send values to I<MongoDB>, a schema-less
+NoSQL database.
+
+B<Synopsis:>
+
+ <Plugin "write_mongodb">
+ <Node "default">
+ Host "localhost"
+ Port "27017"
+ Timeout 1000
+ StoreRates true
+ </Node>
+ </Plugin>
+
+The plugin can send values to multiple instances of I<MongoDB> by specifying
+one B<Node> block for each instance. Within the B<Node> blocks, the following
+options are available:
+
+=over 4
+
+=item B<Host> I<Address>
+
+Hostname or address to connect to. Defaults to C<localhost>.
+
+=item B<Port> I<Service>
+
+Service name or port number to connect to. Defaults to C<27017>.
+
+=item B<Timeout> I<Timeout>
+
+Set the timeout for each operation on I<MongoDB> to I<Timeout> milliseconds.
+Setting this option to zero means no timeout, which is the default.
+
+=item B<StoreRates> B<false>|B<true>
+
+If set to B<true> (the default), convert counter values to rates. If set to
+B<false> counter values are stored as is, i.e. as an increasing integer
+number.
+
+=back
+
=head2 Plugin C<write_http>
This output plugin submits values to an http server by POST them using the
Please note that these placeholders are B<case sensitive>!
-=item B<Severity> B<"FATAL">|B<"WARNING">|B<"OKAY">
+=item B<Severity> B<"FAILURE">|B<"WARNING">|B<"OKAY">
Sets the severity of the message. If omitted, the severity B<"WARNING"> is
used.