rrdbuild - Instructions for building RRDtool
-=head1 DESCRIPTION
-
-=head2 Overview
+=head1 OVERVIEW
If you downloaded the source of rrdtool you have to compile it. This
document will give some information on how this is done.
This document will tell you about all the necessary steps to get going.
-=head2 Building
+These instructions assume you are using a B<bash> shell. If you use csh/tcsh,
+then you can either type F<bash> to switch to bash for the compilation or if
+you know what you are doing just replace the export bits with
+setenv.
+
+We further assume that your copies of B<tar> and B<make> are actually B<GNU
+tar> and B<GNU make> respectively. It could be that they are installed as
+B<gtar> and B<gmake> on your system.
+
+=head1 OPTIMISTIC BUILD
Before you start to build RRDtool, you have to decide two things:
=back
Once you have decided. Save the two locations into environment variables.
-Depending on the shell you are using, you can do either (bash,zsh):
BUILD_DIR=/tmp/rrdbuild
- INSTALL_DIR=/usr/local/rrdtool-1.2.12
+ INSTALL_DIR=/usr/local/rrdtool-1.3rc4
-Or if you run tcsh:
- set BUILD_DIR=/tmp/rrdbuild
- set INSTALL_DIR=/usr/local/rrdtool-1.2.12
+If your F</tmp> is mounted with the option noexec (RHEL seems todo that) you have to choose
+a different directory!
Now make sure the BUILD_DIR exists and go there:
cd $BUILD_DIR
Lets first assume you already have all the necessary libraries
-per-installed. Note that these instructions assume that your copies of
-B<tar> and B<make> are actually B<GNU tar> and B<GNU make> respectively. It
-could be that they are installed as B<gtar> and B<gmake> on your system.
+pre-installed.
- wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.2.12.tar.gz
- tar zxf rrdtool-1.2.12.tar.gz
- cd rrdtool-1.2.12
+ wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.3rc4.tar.gz
+ gunzip -c rrdtool-1.3rc4.tar.gz | tar xf -
+ cd rrdtool-1.3rc4
./configure --prefix=$INSTALL_DIR && make && make install
Ok, this was very optimistic. This try will probably have ended with
-B<configure> complaining about several missing libraries. If you are on a
-Linux or *bsd system you may want to just install the missing bits from your
-software repository. When you do that, make sure you also get the B<-dev>
-package for each library you install. Once you have the missing bits on
-board, just re-run the last line of the instructions above.
+B<configure> complaining about several missing libraries.
+
+=head1 INSTALLING DEPENDENCIES
+
+If your OS lets you install additional packages from a software repository,
+you may get away with installing the missing packages. When the packages are
+installed, run configure again and try to compile again. Below you find some
+hints on getting your OS ready for the rrdtool compilation. Additions to
+this list are welcome.
+
+=head2 OpenSolaris 2008.05
+
+Just add a compiler and the gnome development package:
+
+ pkg install sunstudioexpress
+ pkg install SUNWgnome-common-devel
+
+There is a a problem with F<cairo.pc> on opensolaris. It suggests that
+xrender is required for compilation with cairo. This is not true and also
+bad since opensolaris does not include an F<xrender.pc> file. Use perl to
+fix this:
+
+ perl -i~ -p -e 's/(Requires.*?)\s*xrender.*/$1/' /usr/lib/pkgconfig/cairo.pc
+
+=head2 Debian / Ubuntu
+
+Use apt-get to make sure you have all that is required. A number
+of packages will get added through dependencies.
+
+ apt-get install libpango1.0-dev libxml2-dev
+
+=head1 BUILDING DEPENDENCIES
+
+But again this may have been too optimistic still, and you actually have to
+compile your own copies of some of the required libraries. Things like
+libpng and zlib are pretty standard so you will probably have them on your
+system anyway. Freetype, Fontinst, Cairo, Pango may be installed, but it is
+possible that they are pretty old and thus don't live up to the
+expectations, so you may want to compile their latest versions.
-But again this may have been too optimistic, and you actually have to
-compile your own copies of the required libraries. Here is how:
+=head3 Build Tipps for AIX
+
+If you are woking with AIX, you may find the the B<--disable-shared> option
+will cause things to break for you. In that case you may have to install the
+shared libraries into the rrdtool PREFIX and work with B<--disable-static>
+instead.
+
+Another hint to get rrdtool working on AIX is to use the IBM XL C Compiler:
+
+ export CC=/usr/vac/bin/cc
+ export PERLCC=$CC
+
+(Better instructions for AIX welcome!)
+
+=head2 Building Libraries
+
+In order to build the libraries you need a compiler on your system.
+Unfortunately compilers are not all alike. This has an effect on the CFLAGS
+you want to set. The examples below are for the popular GCC compiler suite.
+If you have an other compile you have to use the following settings:
=over
+=item Sun Forte
+
+ CFLAGS="-xO3 -kPIC"
+
+=back
+
+=over
+
+Some libraries want to know where other libraries are. For this to work,
+set the following environamen variable
+
+ export PKG_CONFIG_PATH=${INSTALL_DIR}/lib/pkgconfig
+ export PATH=$INSTALL_DIR/bin:$PATH
+
+Since we are compiling libraries dynamically, you they must further know
+where to find each other. This is done by setting an appropriate LDFLAG.
+Unfortunatly the syntax differs from system to system:
+
+=over
+
+=item Solaris
+
+ export LDFLAGS=-R${INSTALL_DIR}/lib
+
+=item Linux
+
+ export LDFLAGS="-Wl,--rpath -Wl,${INSTALL_DIR}/lib"
+
+If you are on a 64bit platform, but would like to continue to use the rrd files created
+on your old 32bit linux, you may be able
+
+=item HPUX
+
+ export LDFLAGS="+b${INSTALL_DIR}/lib"
+
+=item AIX
+
+ export LDFLAGS="-Wl,-blibpath:${INSTALL_DIR}/lib"
+
+=back
+
+If you have GNUmake installed and it is not called 'make',
+then do
+
+ export MAKE=gmake
+ export GNUMAKE=gmake
+
+otherwhise just do
+
+ export MAKE=make
+
=item Building zlib
+Chances are very high that you already have that on your system ...
+
cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.2.tar.gz
- tar zxf zlib-1.2.2.tar.gz
- cd zlib-1.2.2
- env CFLAGS="-O3 -fPIC" ./configure --prefix=$BUILD_DIR/lb
- make
- make install
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/zlib-1.2.3.tar.gz
+ gunzip -c zlib-1.2.3.tar.gz | tar xf -
+ cd zlib-1.2.3
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --shared
+ $MAKE
+ $MAKE install
=item Building libpng
the end of line 4 means that line 4 and line 5 are on one line.
cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.8-config.tar.gz
- tar zxvf libpng-1.2.8-config.tar.gz
- cd libpng-1.2.8-config
- env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
- ./configure --disable-shared --prefix=$BUILD_DIR/lb
- make
- make install
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/libpng-1.2.18.tar.gz
+ gunzip -c libpng-1.2.18.tar.gz | tar xf -
+ cd libpng-1.2.10
+ env CFLAGS="-O3 -fPIC" ./configure --prefix=$INSTALL_DIR
+ $MAKE
+ $MAKE install
=item Building freetype
cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/freetype-2.1.9.tar.gz
- tar zxvf freetype-2.1.9.tar.gz
- cd freetype-2.1.9
- env CPPFLAGS="-I$BUILD_DIR/lb/include" LDFLAGS="-L$BUILD_DIR/lb/lib" CFLAGS="-O3 -fPIC" \
- ./configure --disable-shared --prefix=$BUILD_DIR/lb
- make
- make install
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/freetype-2.3.5.tar.gz
+ gunzip -c freetype-2.3.5.tar.gz | tar xf -
+ cd freetype-2.3.5
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
+ $MAKE
+ $MAKE install
If you run into problems building freetype on Solaris, you may want to try to
-add the following at the end of the configure line:
+add the following at the start the configure line:
- GNUMAKE=gmake EGREP=egrep
+ env EGREP=egrep
-=item Building libart_lgpl
+=item Building LibXML2
cd $BUILD_DIR
- wget http://oss.oetiker.ch/rrdtool/pub/libs/libart_lgpl-2.3.17.tar.gz
- tar zxvf libart_lgpl-2.3.17.tar.gz
- cd libart_lgpl-2.3.17
- env CFLAGS="-O3 -fPIC" ./configure --disable-shared --prefix=$BUILD_DIR/lb
- make
- make install
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/libxml2-sources-2.6.31.tar.gz
+ gunzip -c libxml2-sources-2.6.32.tar.gz | tar xf -
+ cd libxml2-sources-2.6.32
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
+ $MAKE
+ $MAKE install
-=back
+=item Building fontconfig
+
+Note that fontconfig has a runtime configuration file in INSTALL_DIR/etc you
+may want to adjust that so that fontconfig finds the fonts on your system.
+Run the fc-cache program to build the fontconfig cache after changeing the
+config file.
+
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/fontconfig-2.4.2.tar.gz
+ gunzip -c fontconfig-2.4.2.tar.gz | tar xf -
+ cd fontconfig-2.4.2
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
+ $MAKE
+ $MAKE install
+
+=item Building Pixman
-Now all the dependent libraries are built and you can try again. Since these
-are static libraries, you may have to use F<ranlib> to make them accessible.
-Especially BSD systems like Mac OS X may require this, Linux and Solaris
-will do just fine without since their F<ar> command does ranlibs job as well.
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/pixman-0.10.0.tar.gz
+ gunzip -c pixman-0.10.0.tar.gz | tar xf -
+ cd fontconfig-2.4.2
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
+ $MAKE
+ $MAKE install
+
+=item Building Cairo
- ranlib $BUILD_DIR/lb/lib/*.a
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/cairo-1.6.4.tar.gz
+ gunzip -c cairo-1.4.10.tar.gz | tar xf -
+ cd cairo-1.4.10
+ ./configure --prefix=$INSTALL_DIR \
+ --enable-xlib=no \
+ --enable-xlib-render=no \
+ --enable-win32=no \
+ CFLAGS="-O3 -fPIC"
+ $MAKE
+ $MAKE install
+
+=item Building Glib
-This time you tell configure where it should be looking for libraries and
-include files. This is done via environment variables. Depending on the
-shell you are running, the syntax for setting environment variables is
-different. Under csh/tcsh you use:
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/glib-2.15.4.tar.gz
+ gunzip -c glib-2.12.13.tar.gz | tar xf -
+ cd glib-2.12.13
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC"
+ $MAKE
+ $MAKE install
- set IR=-I$BUILD_DIR/lb/include
- setenv CPPFLAGS "$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- setenv LDFLAGS -L$BUILD_DIR/lb/lib
- setenv CFLAGS -O3
+=item Building Pango
-If you are running bash/sh/ash/ksh/zsh use this:
+ cd $BUILD_DIR
+ wget http://oss.oetiker.ch/rrdtool/pub/libs/pango-1.21.1.tar.gz
+ gunzip -c pango-1.21.1.tar.gz | tar xf -
+ cd pango-1.21.1
+ ./configure --prefix=$INSTALL_DIR CFLAGS="-O3 -fPIC" --without-x
+ $MAKE
+ $MAKE install
+
+=back
- IR=-I$BUILD_DIR/lb/include
- CPPFLAGS="$IR $IR/libart-2.0 $IR/freetype2 $IR/libpng"
- LDFLAGS="-L$BUILD_DIR/lb/lib"
- CFLAGS=-O3
- export CPPFLAGS LDFLAGS CFLAGS
+Now all the dependent libraries are built and you can try again. This time
+you tell configure where it should be looking for libraries and include
+files. This is done via environment variables. Depending on the shell you
+are running, the syntax for setting environment variables is different.
And finally try building again. We disable the python and tcl bindings
because it seems that a fair number of people have ill configured python and
tcl setups that would prevent rrdtool from building if they are included in
their current state.
- cd $BUILD_DIR/rrdtool-1.2.12
- ./configure --prefix=$INSTALL_DIR --disable-python --disable-tcl
- make clean
- make
- make install
+ cd $BUILD_DIR/rrdtool-1.3rc4
+ ./configure --prefix=$INSTALL_DIR --disable-tcl --disable-python
+ $MAKE clean
+ $MAKE
+ $MAKE install
SOLARIS HINT: if you want to build the perl module for the native perl (the
-one shipping with solaris) you will need the sun forte compiler
-installed on your box or you have to hand-tune bindings/perl-shared/Makefile
-while building!
+one shipping with solaris) you will need the sun forte compiler installed on
+your box or you have to hand-tune bindings/perl-shared/Makefile while
+building!
-Now go to I<$INSTALL_DIR>B</share/rrdtool/examples/> and run them to see if your
-build has been successful.
+Now go to I<$INSTALL_DIR>B</share/rrdtool/examples/> and run them to see if
+your build has been successful.
=head1 AUTHOR
-Tobias Oetiker E<lt>oetiker@ee.ethz.chE<gt>
+Tobias Oetiker E<lt>tobi@oetiker.chE<gt>