* collectd is able to collect the following data:
- apache
- Apache server utilization: Number of bytes transfered, number of
+ Apache server utilization: Number of bytes transferred, number of
requests handled and detailed scoreboard statistics
- apcups
APC UPS Daemon: UPS charge, load, input/output/battery voltage, etc.
- apple_sensors
- Sensors in Macs running Mac OS X / Darwin: Temperature, fanspeed and
+ Sensors in Macs running Mac OS X / Darwin: Temperature, fan speed and
voltage sensors.
- aquaero
- Various sensors in the Aquaero 5 watercooling board made by Aquacomputer.
+ Various sensors in the Aquaero 5 water cooling board made by Aquacomputer.
- ascent
Statistics about Ascent, a free server for the game `World of Warcraft'.
+ - barometer
+ Reads absolute barometric pressure, air pressure reduced to sea level and
+ temperature. Supported sensors are MPL115A2 and MPL3115 from Freescale
+ and BMP085 from Bosch.
+
- battery
Batterycharge, -current and voltage of ACPI and PMU based laptop
batteries.
Name server and resolver statistics from the `statistics-channel'
interface of BIND 9.5, 9,6 and later.
+ - ceph
+ Statistics from the Ceph distributed storage system.
+
- cgroups
CPU accounting information for process groups under Linux.
- dns
DNS traffic: Query types, response codes, opcodes and traffic/octets
- transfered.
+ transferred.
+
+ - drbd
+ Collect individual drbd resource statistics.
- email
Email statistics: Count, traffic, spam scores and checks.
Values gathered by a custom program or script.
See collectd-exec(5).
+ - fhcount
+ File handles statistics.
+
- filecount
Count the number of files in directories.
- gmond
Receive multicast traffic from Ganglia instances.
+ - gps
+ Monitor gps related data through gpsd.
+
- hddtemp
- Harddisk temperatures using hddtempd.
+ Hard disk temperatures using hddtempd.
- interface
Interface traffic: Number of octets, packets and errors for each
interface.
- - iptables
- Iptables' counters: Number of bytes that were matched by a certain
- iptables rule.
+ - ipc
+ IPC counters: semaphores used, number of allocated segments in shared
+ memory and more.
- ipmi
IPMI (Intelligent Platform Management Interface) sensors information.
+ - iptables
+ Iptables' counters: Number of bytes that were matched by a certain
+ iptables rule.
+
- ipvs
IPVS connection statistics (number of connections, octets and packets
for each service and destination).
Detailed CPU statistics of the “Logical Partitions” virtualization
technique built into IBM's POWER processors.
- - libvirt
- CPU, memory, disk and network I/O statistics from virtual machines.
-
- lvm
Size of “Logical Volumes” (LV) and “Volume Groups” (VG) of Linux'
“Logical Volume Manager” (LVM).
interfaces that use the Atheros chipset and the MadWifi driver.
- mbmon
- Motherboard sensors: temperature, fanspeed and voltage information,
+ Motherboard sensors: temperature, fan speed and voltage information,
using mbmon(1).
- md
Reads values from Modbus/TCP enabled devices. Supports reading values
from multiple "slaves" so gateway devices can be used.
+ - mqtt
+ Publishes and subscribes to MQTT topics.
+
- multimeter
Information provided by serial multimeters, such as the `Metex
M-4650CR'.
- ntpd
NTP daemon statistics: Local clock drift, offset to peers, etc.
+ - numa
+ Information about Non-Uniform Memory Access (NUMA).
+
- nut
Network UPS tools: UPS current, voltage, power, charge, utilisation,
temperature, etc. See upsd(8).
- - numa
- Information about Non-Uniform Memory Access (NUMA).
-
- olsrd
Queries routing information from the “Optimized Link State Routing”
daemon.
Read onewire sensors using the owcapu library of the owfs project.
Please read in collectd.conf(5) why this plugin is experimental.
+ - openldap
+ Read monitoring information from OpenLDAP's cn=Monitor subtree.
+
- openvpn
RX and TX of each client in openvpn-status.log (status-version 2).
<http://openvpn.net/index.php/documentation/howto.html>
See collectd-python(5) for details.
- redis
- The redis plugin gathers information from a redis server, including:
+ The redis plugin gathers information from a Redis server, including:
uptime, used memory, total connections etc.
- routeros
to have its measurements fed to collectd. This includes multimeters,
sound level meters, thermometers, and much more.
+ - smart
+ Collect SMART statistics, notably load cycle count, temperature
+ and bad sectors.
+
- snmp
Read values from SNMP (Simple Network Management Protocol) enabled
network devices such as switches, routers, thermometers, rack monitoring
servers, etc. See collectd-snmp(5).
+ - statsd
+ Acts as a StatsD server, reading values sent over the network from StatsD
+ clients and calculating rates and other aggregates out of these values.
+
- swap
- Pages swapped out onto harddisk or whatever is called `swap' by the OS..
+ Pages swapped out onto hard disk or whatever is called `swap' by the OS..
- table
Parse table-like structured files.
- tail
- Follows (tails) logfiles, parses them by lines and submits matched
+ Follows (tails) log files, parses them by lines and submits matched
values.
- tail_csv
Reads the number of records and file size from a running Tokyo Tyrant
server.
+ - turbostat
+ Reads CPU frequency and C-state residency on modern Intel
+ turbo-capable processors.
+
- uptime
System uptime statistics.
- varnish
Various statistics from Varnish, an HTTP accelerator.
+ - virt
+ CPU, memory, disk and network I/O statistics from virtual machines.
+
- vmem
Virtual memory statistics, e. g. the number of page-ins/-outs or the
number of pagefaults.
- zfs_arc
Statistics for ZFS' “Adaptive Replacement Cache” (ARC).
+ - zone
+ Measures the percentage of cpu load per container (zone) under Solaris 10
+ and higher
+
+ - zookeeper
+ Read data from Zookeeper's MNTR command.
+
* Output can be written or sent to various destinations by the following
plugins:
- write_kafka
Sends data to Apache Kafka, a distributed queue.
+ - write_log
+ Writes data to the log
+
- write_mongodb
Sends data to MongoDB, a NoSQL database.
- write_riemann
Sends data to Riemann, a stream processing and monitoring system.
+ - write_sensu
+ Sends data to Sensu, a stream processing and monitoring system, via the
+ Sensu client local TCP socket.
+
+ - write_tsdb
+ Sends data OpenTSDB, a scalable no master, no shared state time series
+ database.
+
* Logging is, as everything in collectd, provided by plugins. The following
- plugins keep up informed about what's going on:
+ plugins keep us informed about what's going on:
- logfile
- Writes logmessages to a file or STDOUT/STDERR.
+ Writes log messages to a file or STDOUT/STDERR.
- perl
Log messages are propagated to plugins written in Perl as well.
- syslog
Logs to the standard UNIX logging mechanism, syslog.
+ - log_logstash
+ Writes log messages formatted as logstash JSON events.
+
* Notifications can be handled by the following plugins:
- notify_desktop
values are out of bounds. See collectd-threshold(5) for details.
- uuid
- Sets the hostname to an unique identifier. This is meant for setups
+ Sets the hostname to a unique identifier. This is meant for setups
where each client may migrate to another physical host, possibly going
through one or more name changes in the process.
time starting up again and again. With the exception of the exec plugin no
processes are forked. Caching in output plugins, such as the rrdtool and
network plugins, makes sure your resources are used efficiently. Also,
- since collectd is programmed multithreaded it benefits from hyperthreading
+ since collectd is programmed multithreaded it benefits from hyper-threading
and multicore processors and makes sure that the daemon isn't idle if only
one plugin waits for an IO-operation to complete.
---------
* collectd's configuration file can be found at `sysconfdir'/collectd.conf.
- Run `collectd -h' for a list of builtin defaults. See `collectd.conf(5)'
+ Run `collectd -h' for a list of built-in defaults. See `collectd.conf(5)'
for a list of options and a syntax description.
* When the `csv' or `rrdtool' plugins are loaded they'll write the values to
particular.
<http://developer.apple.com/corefoundation/>
+ * libatasmart (optional)
+ Used by the `smart' plugin.
+ <http://git.0pointer.de/?p=libatasmart.git>
+
+ * libcap (optional)
+ The `turbostat' plugin can optionally build Linux Capabilities support,
+ which avoids full privileges requirement (aka. running as root) to read
+ values.
+ <http://sites.google.com/site/fullycapable/>
+
* libclntsh (optional)
Used by the `oracle' plugin.
- * libcredis (optional)
- Used by the redis plugin. Please note that you require a 0.2.2 version
- or higher. <http://code.google.com/p/credis/>
+ * libhiredis (optional)
+ Used by the redis plugin. Please note that you require a 0.10.0 version
+ or higher. <https://github.com/redis/hiredis>
* libcurl (optional)
- If you want to use the `apache', `ascent', `curl', `nginx', or `write_http'
- plugin.
+ If you want to use the `apache', `ascent', `bind', `curl', `curl_json',
+ `curl_xml', `nginx', or `write_http' plugin.
<http://curl.haxx.se/>
* libdbi (optional)
Used by the `network' plugin for encryption and authentication.
<http://www.gnupg.org/>
+ * libgps (optional)
+ Used by the `gps' plugin.
+ <http://developer.berlios.de/projects/gpsd/>
+
* libhal (optional)
- If present, the uuid plugin will check for UUID from HAL.
+ If present, the `uuid' plugin will check for UUID from HAL.
<http://hal.freedesktop.org/>
+ * libi2c-dev (optional)
+ Used for the plugin `barometer', provides just the i2c-dev.h header file
+ for user space i2c development.
+
* libiptc (optional)
For querying iptables counters.
<http://netfilter.org/>
- If not found on the system, a version shipped with this distribution can
- be used. It requires some Linux headers in /usr/include/linux. You can
- force the build system to use the shipped version by specifying
- --with-libiptc=shipped
- when running the configure script.
-
* libjvm (optional)
Library that encapsulates the `Java Virtual Machine' (JVM). This library is
- used by the Java plugin to execute Java bytecode. See “Configuring with
+ used by the `java' plugin to execute Java bytecode. See “Configuring with
libjvm” below.
<http://openjdk.java.net/> (and others)
+ * libldap (optional)
+ Used by the `openldap' plugin.
+ <http://www.openldap.org/>
+
+ * liblvm2 (optional)
+ Used by the `lvm' plugin.
+ <ftp://sources.redhat.com/pub/lvm2/>
+
* libmemcached (optional)
Used by the `memcachec' plugin to connect to a memcache daemon.
<http://tangent.org/552/libmemcached.html>
<http://www.netfilter.org/projects/libmnl/>
* libmodbus (optional)
- Used by the “modbus” plugin to communicate with Modbus/TCP devices. The
- “modbus” plugin works with version 2.0.3 of the library – due to frequent
+ Used by the `modbus' plugin to communicate with Modbus/TCP devices. The
+ `modbus' plugin works with version 2.0.3 of the library – due to frequent
API changes other versions may or may not compile cleanly.
<http://www.libmodbus.org/>
<http://dev.mysql.com/>
* libnetapp (optional)
- Required for the “netapp” plugin.
+ Required for the `netapp' plugin.
This library is part of the “Manage ONTAP SDK” published by NetApp.
* libnetsnmp (optional)
For the `notify_desktop' plugin.
<http://www.galago-project.org/>
+ * libopenipmi (optional)
+ Used by the `ipmi' plugin to prove IPMI devices.
+ <http://openipmi.sourceforge.net/>
+
* liboping (optional)
Used by the `ping' plugin to send and receive ICMP packets.
<http://octo.it/liboping/>
* libprotobuf-c, protoc-c (optional)
Used by the `pinba' plugin to generate a parser for the network packets
- sent by the Pinba PHP extension.
+ sent by the Pinba PHP extension, and by the `write_riemann' plugin to
+ generate events to be sent to a Riemann server.
<http://code.google.com/p/protobuf-c/>
* libpython (optional)
<http://www.python.org/>
* librabbitmq (optional; also called “rabbitmq-c”)
- Used by the AMQP plugin for AMQP connections, for example to RabbitMQ.
+ Used by the `amqp' plugin for AMQP connections, for example to RabbitMQ.
<http://hg.rabbitmq.com/rabbitmq-c/>
* librdkafka (optional; also called “rdkafka”)
- Used by the Kafka plugin for producing.
+ Used by the `write_kafka' plugin for producing messages and sending them
+ to a Kafka broker.
<https://github.com/edenhill/librdkafka>
* librouteros (optional)
<http://www.lm-sensors.org/>
* libsigrok (optional)
- Used by the sigrok plugin. In addition, libsigrok depends on glib,
+ Used by the `sigrok' plugin. In addition, libsigrok depends on glib,
libzip, and optionally (depending on which drivers are enabled) on
libusb, libftdi and libudev.
<http://www.i-scream.org/libstatgrab/>
* libtokyotyrant (optional)
- Used by the tokyotyrant plugin.
+ Used by the `tokyotyrant' plugin.
<http://1978th.net/tokyotyrant/>
* libupsclient/nut (optional)
<http://libvirt.org/>
* libxml2 (optional)
- Parse XML data. This is needed for the `ascent' and `libvirt' plugins.
+ Parse XML data. This is needed for the `ascent', `bind', `curl_xml' and
+ `virt' plugins.
<http://xmlsoft.org/>
* libxmms (optional)
<http://www.xmms.org/>
* libyajl (optional)
- Parse JSON data. This is needed for the `curl_json' plugin.
+ Parse JSON data. This is needed for the `ceph', `curl_json' and
+ `log_logstash' plugins.
<http://github.com/lloyd/yajl>
* libvarnish (optional)
- Fetches statistics from a Varnish instance. This is needed for the Varnish plugin
+ Fetches statistics from a Varnish instance. This is needed for the
+ `varnish' plugin.
<http://varnish-cache.org>
Configuring / Compiling / Installing
Adding "-ljvm" to the JAVA_LDFLAGS is done automatically, you don't have to
do that.
+Generating the configure script
+-------------------------------
+
+Collectd ships with a `build.sh' script to generate the `configure'
+script shipped with releases.
+
+To generate the `configure` script, you'll need the following dependencies:
+
+- autoconf
+- automake
+- flex
+- bison
+- libtool
+- libtool-ltdl
+
+The `build.sh' script takes no arguments.
+
Crosscompiling
--------------