1 /*****************************************************************************
2 * RRDtool 1.2.23 Copyright by Tobi Oetiker, 1997-2007
3 *****************************************************************************
4 * rrd_dump Display a RRD
5 *****************************************************************************
8 * Revision 1.7 2004/05/25 20:53:21 oetiker
9 * prevent small leak when resources are exhausted -- Mike Slifcak
11 * Revision 1.6 2004/05/25 20:51:49 oetiker
12 * Update displayed copyright messages to be consistent. -- Mike Slifcak
14 * Revision 1.5 2003/02/13 07:05:27 oetiker
15 * Find attached the patch I promised to send to you. Please note that there
16 * are three new source files (src/rrd_is_thread_safe.h, src/rrd_thread_safe.c
17 * and src/rrd_not_thread_safe.c) and the introduction of librrd_th. This
18 * library is identical to librrd, but it contains support code for per-thread
19 * global variables currently used for error information only. This is similar
20 * to how errno per-thread variables are implemented. librrd_th must be linked
21 * alongside of libpthred
23 * There is also a new file "THREADS", holding some documentation.
25 * -- Peter Stamfest <peter@stamfest.at>
27 * Revision 1.4 2002/02/01 20:34:49 oetiker
28 * fixed version number and date/time
30 * Revision 1.3 2001/03/10 23:54:39 oetiker
31 * Support for COMPUTE data sources (CDEF data sources). Removes the RPN
32 * parser and calculator from rrd_graph and puts then in a new file,
33 * rrd_rpncalc.c. Changes to core files rrd_create and rrd_update. Some
34 * clean-up of aberrant behavior stuff, including a bug fix.
35 * Documentation update (rrdcreate.pod, rrdupdate.pod). Change xml format.
36 * -- Jake Brutlag <jakeb@corp.webtv.net>
38 * Revision 1.2 2001/03/04 13:01:55 oetiker
40 * Revision 1.1.1.1 2001/02/25 22:25:05 oetiker
43 *****************************************************************************/
45 #include "rrd_rpncalc.h"
47 #if !(defined(NETWARE) || defined(WIN32))
48 extern char *tzname[2];
58 rrd_set_error("Not enough arguments");
63 rc = rrd_dump_r(argv[1], argv[2]);
65 rc = rrd_dump_r(argv[1], NULL);
75 unsigned int i, ii, ix, iii = 0;
79 off_t rra_base, rra_start, rra_next;
86 rrd_file = rrd_open(filename, &rrd, RRD_READONLY | RRD_READAHEAD);
87 if (rrd_file == NULL) {
94 if (!(out_file = fopen(outname, "w"))) {
101 fputs("<!-- Round Robin Database Dump -->", out_file);
102 fputs("<rrd>", out_file);
103 if (atoi(rrd.stat_head->version) <= 3) {
104 fprintf(out_file, "\t<version> %s </version>\n", RRD_VERSION3);
106 fprintf(out_file, "\t<version> %s </version>\n", RRD_VERSION);
108 fprintf(out_file, "\t<step> %lu </step> <!-- Seconds -->\n",
109 rrd.stat_head->pdp_step);
111 localtime_r(&rrd.live_head->last_up, &tm);
112 strftime(somestring, 200, "%Y-%m-%d %H:%M:%S %Z", &tm);
114 # error "Need strftime"
116 fprintf(out_file, "\t<lastupdate> %ld </lastupdate> <!-- %s -->\n\n",
117 rrd.live_head->last_up, somestring);
118 for (i = 0; i < rrd.stat_head->ds_cnt; i++) {
119 fprintf(out_file, "\t<ds>\n");
120 fprintf(out_file, "\t\t<name> %s </name>\n", rrd.ds_def[i].ds_nam);
121 fprintf(out_file, "\t\t<type> %s </type>\n", rrd.ds_def[i].dst);
122 if (dst_conv(rrd.ds_def[i].dst) != DST_CDEF) {
124 "\t\t<minimal_heartbeat> %lu </minimal_heartbeat>\n",
125 rrd.ds_def[i].par[DS_mrhb_cnt].u_cnt);
126 if (isnan(rrd.ds_def[i].par[DS_min_val].u_val)) {
127 fprintf(out_file, "\t\t<min> NaN </min>\n");
129 fprintf(out_file, "\t\t<min> %0.10e </min>\n",
130 rrd.ds_def[i].par[DS_min_val].u_val);
132 if (isnan(rrd.ds_def[i].par[DS_max_val].u_val)) {
133 fprintf(out_file, "\t\t<max> NaN </max>\n");
135 fprintf(out_file, "\t\t<max> %0.10e </max>\n",
136 rrd.ds_def[i].par[DS_max_val].u_val);
138 } else { /* DST_CDEF */
141 rpn_compact2str((rpn_cdefds_t *) &(rrd.ds_def[i].par[DS_cdef]),
143 fprintf(out_file, "\t\t<cdef> %s </cdef>\n", str);
146 fprintf(out_file, "\n\t\t<!-- PDP Status -->\n");
147 fprintf(out_file, "\t\t<last_ds> %s </last_ds>\n",
148 rrd.pdp_prep[i].last_ds);
149 if (isnan(rrd.pdp_prep[i].scratch[PDP_val].u_val)) {
150 fprintf(out_file, "\t\t<value> NaN </value>\n");
152 fprintf(out_file, "\t\t<value> %0.10e </value>\n",
153 rrd.pdp_prep[i].scratch[PDP_val].u_val);
155 fprintf(out_file, "\t\t<unknown_sec> %lu </unknown_sec>\n",
156 rrd.pdp_prep[i].scratch[PDP_unkn_sec_cnt].u_cnt);
158 fprintf(out_file, "\t</ds>\n\n");
161 fputs("<!-- Round Robin Archives -->", out_file);
163 rra_base = rrd_file->header_len;
166 for (i = 0; i < rrd.stat_head->rra_cnt; i++) {
170 rra_start = rra_next;
171 rra_next += (rrd.stat_head->ds_cnt
172 * rrd.rra_def[i].row_cnt * sizeof(rrd_value_t));
173 fprintf(out_file, "\t<rra>\n");
174 fprintf(out_file, "\t\t<cf> %s </cf>\n", rrd.rra_def[i].cf_nam);
176 "\t\t<pdp_per_row> %lu </pdp_per_row> <!-- %lu seconds -->\n\n",
177 rrd.rra_def[i].pdp_cnt,
178 rrd.rra_def[i].pdp_cnt * rrd.stat_head->pdp_step);
179 /* support for RRA parameters */
180 fprintf(out_file, "\t\t<params>\n");
181 switch (cf_conv(rrd.rra_def[i].cf_nam)) {
184 fprintf(out_file, "\t\t<hw_alpha> %0.10e </hw_alpha>\n",
185 rrd.rra_def[i].par[RRA_hw_alpha].u_val);
186 fprintf(out_file, "\t\t<hw_beta> %0.10e </hw_beta>\n",
187 rrd.rra_def[i].par[RRA_hw_beta].u_val);
189 "\t\t<dependent_rra_idx> %lu </dependent_rra_idx>\n",
190 rrd.rra_def[i].par[RRA_dependent_rra_idx].u_cnt);
195 "\t\t<seasonal_gamma> %0.10e </seasonal_gamma>\n",
196 rrd.rra_def[i].par[RRA_seasonal_gamma].u_val);
198 "\t\t<seasonal_smooth_idx> %lu </seasonal_smooth_idx>\n",
199 rrd.rra_def[i].par[RRA_seasonal_smooth_idx].u_cnt);
201 "\t\t<dependent_rra_idx> %lu </dependent_rra_idx>\n",
202 rrd.rra_def[i].par[RRA_dependent_rra_idx].u_cnt);
205 fprintf(out_file, "\t\t<delta_pos> %0.10e </delta_pos>\n",
206 rrd.rra_def[i].par[RRA_delta_pos].u_val);
207 fprintf(out_file, "\t\t<delta_neg> %0.10e </delta_neg>\n",
208 rrd.rra_def[i].par[RRA_delta_neg].u_val);
209 fprintf(out_file, "\t\t<window_len> %lu </window_len>\n",
210 rrd.rra_def[i].par[RRA_window_len].u_cnt);
212 "\t\t<failure_threshold> %lu </failure_threshold>\n",
213 rrd.rra_def[i].par[RRA_failure_threshold].u_cnt);
217 "\t\t<dependent_rra_idx> %lu </dependent_rra_idx>\n",
218 rrd.rra_def[i].par[RRA_dependent_rra_idx].u_cnt);
225 fprintf(out_file, "\t\t<xff> %0.10e </xff>\n",
226 rrd.rra_def[i].par[RRA_cdp_xff_val].u_val);
229 fprintf(out_file, "\t\t</params>\n");
230 fprintf(out_file, "\t\t<cdp_prep>\n");
231 for (ii = 0; ii < rrd.stat_head->ds_cnt; ii++) {
232 unsigned long ivalue;
234 fprintf(out_file, "\t\t\t<ds>\n");
235 /* support for exporting all CDP parameters */
236 /* parameters common to all CFs */
237 /* primary_val and secondary_val do not need to be saved between updates
238 * so strictly speaking they could be omitted.
239 * However, they can be useful for diagnostic purposes, so are included here. */
240 value = rrd.cdp_prep[i * rrd.stat_head->ds_cnt
241 + ii].scratch[CDP_primary_val].u_val;
244 "\t\t\t<primary_value> NaN </primary_value>\n");
247 "\t\t\t<primary_value> %0.10e </primary_value>\n",
251 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
252 ii].scratch[CDP_secondary_val].u_val;
255 "\t\t\t<secondary_value> NaN </secondary_value>\n");
258 "\t\t\t<secondary_value> %0.10e </secondary_value>\n",
261 switch (cf_conv(rrd.rra_def[i].cf_nam)) {
265 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
266 ii].scratch[CDP_hw_intercept].u_val;
268 fprintf(out_file, "\t\t\t<intercept> NaN </intercept>\n");
271 "\t\t\t<intercept> %0.10e </intercept>\n", value);
274 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
275 ii].scratch[CDP_hw_last_intercept].u_val;
278 "\t\t\t<last_intercept> NaN </last_intercept>\n");
281 "\t\t\t<last_intercept> %0.10e </last_intercept>\n",
285 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
286 ii].scratch[CDP_hw_slope].u_val;
288 fprintf(out_file, "\t\t\t<slope> NaN </slope>\n");
290 fprintf(out_file, "\t\t\t<slope> %0.10e </slope>\n",
294 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
295 ii].scratch[CDP_hw_last_slope].u_val;
298 "\t\t\t<last_slope> NaN </last_slope>\n");
301 "\t\t\t<last_slope> %0.10e </last_slope>\n",
305 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
306 ii].scratch[CDP_null_count].u_cnt;
307 fprintf(out_file, "\t\t\t<nan_count> %lu </nan_count>\n",
310 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
311 ii].scratch[CDP_last_null_count].u_cnt;
313 "\t\t\t<last_nan_count> %lu </last_nan_count>\n",
319 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
320 ii].scratch[CDP_hw_seasonal].u_val;
322 fprintf(out_file, "\t\t\t<seasonal> NaN </seasonal>\n");
324 fprintf(out_file, "\t\t\t<seasonal> %0.10e </seasonal>\n",
328 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
329 ii].scratch[CDP_hw_last_seasonal].u_val;
332 "\t\t\t<last_seasonal> NaN </last_seasonal>\n");
335 "\t\t\t<last_seasonal> %0.10e </last_seasonal>\n",
339 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
340 ii].scratch[CDP_init_seasonal].u_cnt;
341 fprintf(out_file, "\t\t\t<init_flag> %lu </init_flag>\n",
349 char *violations_array = (char *) ((void *)
356 fprintf(out_file, "\t\t\t<history> ");
358 vidx < rrd.rra_def[i].par[RRA_window_len].u_cnt;
360 fprintf(out_file, "%d", violations_array[vidx]);
362 fprintf(out_file, " </history>\n");
371 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
372 ii].scratch[CDP_val].u_val;
374 fprintf(out_file, "\t\t\t<value> NaN </value>\n");
376 fprintf(out_file, "\t\t\t<value> %0.10e </value>\n",
380 "\t\t\t<unknown_datapoints> %lu </unknown_datapoints>\n",
381 rrd.cdp_prep[i * rrd.stat_head->ds_cnt +
382 ii].scratch[CDP_unkn_pdp_cnt].u_cnt);
385 fprintf(out_file, "\t\t\t</ds>\n");
387 fprintf(out_file, "\t\t</cdp_prep>\n");
389 fprintf(out_file, "\t\t<database>\n");
390 rrd_seek(rrd_file, (rra_start + (rrd.rra_ptr[i].cur_row + 1)
391 * rrd.stat_head->ds_cnt
392 * sizeof(rrd_value_t)), SEEK_SET);
393 timer = -(rrd.rra_def[i].row_cnt - 1);
394 ii = rrd.rra_ptr[i].cur_row;
395 for (ix = 0; ix < rrd.rra_def[i].row_cnt; ix++) {
397 if (ii >= rrd.rra_def[i].row_cnt) {
398 rrd_seek(rrd_file, rra_start, SEEK_SET);
399 ii = 0; /* wrap if max row cnt is reached */
401 now = (rrd.live_head->last_up
402 - rrd.live_head->last_up
403 % (rrd.rra_def[i].pdp_cnt * rrd.stat_head->pdp_step))
404 + (timer * rrd.rra_def[i].pdp_cnt * rrd.stat_head->pdp_step);
408 localtime_r(&now, &tm);
409 strftime(somestring, 200, "%Y-%m-%d %H:%M:%S %Z", &tm);
411 # error "Need strftime"
413 fprintf(out_file, "\t\t\t<!-- %s / %d --> <row>", somestring,
415 for (iii = 0; iii < rrd.stat_head->ds_cnt; iii++) {
416 rrd_read(rrd_file, &my_cdp, sizeof(rrd_value_t) * 1);
418 fprintf(out_file, "<v> NaN </v>");
420 fprintf(out_file, "<v> %0.10e </v>", my_cdp);
423 fprintf(out_file, "</row>\n");
425 fprintf(out_file, "\t\t</database>\n\t</rra>\n");
428 fprintf(out_file, "</rrd>\n");
430 if (out_file != stdout) {
433 return rrd_close(rrd_file);