3 **Data Plane Development Kit** (DPDK) is a set of drivers and libraries for fast
8 The *dpdkstat plugin* has the following requirements:
13 You can also build with GCC 4.8 (e.g. Ubuntu 14.04) if you specify the SSSE3
14 instruction set manually:
16 make -j CFLAGS+='-mssse3'
20 * Setup the build environment:
22 Ensure that you have GCC 4.9 or later. Ubuntu 14.04, for example, has GCC
23 4.8 by default and requires an upgrade:
25 add-apt-repository ppa:ubuntu-toolchain-r/test
27 apt-get install gcc-4.9
29 If you know that the platform that you wish to run collectd on supports the
30 SSSE3 instruction set, GCC 4.8 also works if you enable SSSE3 manually:
32 make -j CFLAGS+='-mssse3'
36 git clone git://dpdk.org/dpdk
38 * Checkout the [DPDK system
39 requirements](http://dpdk.org/doc/guides/linux_gsg/sys_reqs.html) and make
40 sure you have the required tools and hugepage setup as specified there.
42 **Note:** It's recommended to use the 1GB hugepage setup for best
43 performance, please follow the instruction for "Reserving Hugepages for DPDK
44 Use" in the link above.
46 However if you plan on configuring 2MB hugepages on the fly please ensure to
47 add appropriate commands to reserve hugepages in a system startup script if
48 collectd is booted at system startup time. These commands include:
51 mount -t hugetlbfs nodev /mnt/huge
52 echo 64 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
54 * To configure the DPDK build for the combined shared library and enable autoload
55 of pmd drivers modify `config/common_base` in your DPDK as follows
58 # Compile to share library
60 -CONFIG_RTE_BUILD_SHARED_LIB=n
61 +CONFIG_RTE_BUILD_SHARED_LIB=y
63 # Default driver path (or "" to disable)
64 -CONFIG_RTE_EAL_PMD_PATH=""
65 +CONFIG_RTE_EAL_PMD_PATH="/usr/lib/dpdk-pmd/"
67 * Prepare the configuration for the appropriate target as specified at:
68 http://dpdk.org/doc/guides/linux_gsg/build_dpdk.html.
72 make config T=x86_64-native-linuxapp-gcc
78 * Install DPDK to `/usr`
80 sudo make install prefix=/usr
82 * Create dpdk-pmd folder
84 mkdir -p /usr/lib/dpdk-pmd
86 * Create symlinks to pmd drivers
88 find /usr/lib -type f -name 'librte_pmd*' | while read path ; do ln -s $path /usr/lib/dpdk-pmd/`echo $path | grep -o 'librte_.*so'` ; done
90 **Note 1:** You must run make install as the configuration of collectd with
91 DPDK expects DPDK to be installed somewhere.
93 **Note 2:** If you don't specify a prefix then DPDK will be installed in
96 **Note 3:** If you are not root then use sudo to make install DPDK to the
99 **Note 4:** You **MUST** create symlink to a NIC driver lib. This way collectd
100 will be able to work with device bound to dpdk.
102 * Check that the DPDK library has been installed in `/usr/lib` or `/lib`:
104 ls /usr/lib | grep dpdk
106 * Bind the interfaces to use with dpdkstat to DPDK:
108 DPDK devices can be setup with either the VFIO (for DPDK 1.7+) or UIO
111 **Note:** UIO requires inserting an out of tree driver `igb_uio.ko` that is
120 * Insert `igb_uio.ko`:
122 sudo insmod $DPDK_BUILD/kmod/igb_uio.ko
124 * Bind network device to `igb_uio`:
126 sudo $DPDK_DIR/tools/dpdk_nic_bind.py --bind=igb_uio eth1
130 * VFIO needs to be supported in the kernel and the BIOS. More information
131 can be found at: http://dpdk.org/doc/guides/linux_gsg/build_dpdk.html.
132 * Insert the `vfio-pci.ko` module:
136 * Set the correct permissions for the VFIO device:
138 sudo /usr/bin/chmod a+x /dev/vfio
139 sudo /usr/bin/chmod 0666 /dev/vfio/*
141 * Bind the network device to `vfio-pci`:
143 sudo $DPDK_DIR/tools/dpdk_nic_bind.py --bind=vfio-pci eth1
145 **Note:** Please ensure to add appropriate commands to bind the network
146 interfaces to DPDK in a system startup script if collectd is booted at
149 * Run `ldconfig` to update the shared library cache.
151 ## Build collectd with DPDK
153 **Note:** DPDK 16.04 is the minimum version and currently supported version of
154 DPDK required for the dpdkstat plugin. This is to allow the plugin to take
155 advantage of functions added to detect if the DPDK primary process is alive.
158 **Note:** The *Address-Space Layout Randomization* (ASLR) security feature in
159 Linux should be disabled, in order for the same hugepage memory mappings to be
160 present in all DPDK multi-process applications. Note that this has security
165 echo 0 > /proc/sys/kernel/randomize_va_space
167 * To fully enable ASLR:
169 echo 2 > /proc/sys/kernel/randomize_va_space
171 See also: http://dpdk.org/doc/guides/prog_guide/multi_proc_support.html
173 * Generate the build script as specified below. (i.e. run `build.sh`).
174 * Configure collectd with the DPDK shared library. If DPDK is installed in
175 custom installation path you can specify headers include path using
176 LIBDPDK_CPPFLAGS variable and libraries path with LIBDPDK_LDFLAGS.
181 or for custom DPKD installation:
183 ./configure LIBDPDK_CPPFLAGS="-I/home/joe/include/dpdk" LIBDPDK_LDFLAGS="-L/home/joe/usr/lib"
185 * Make sure that libdpdk and dpdkstat are enabled in the *configure* output.
191 libdpdk . . . . . . . . yes
195 dpdkstat . . . . . . .yes
199 make -j && make -j install
201 **Note:** As mentioned above, if you are building on Ubuntu 14.04 with
202 GCC <= 4.8.X, you need to use:
204 make -j CFLAGS+='-mssse3' && make -j install
208 * The same PCI device configuration should be passed to the primary process as
209 the secondary process uses the same port indexes as the primary.
210 * A blacklist / whitelist of NICs isn't supported yet.
214 The *dpdkstat plugin* is copyright (c) 2016 *Intel Corporation* and licensed
215 under the *MIT license*. Full licensing terms can be found in the file