SYNOPSIS
--------
-'git-ls-files' [-z] [-t]
+[verse]
+'git-ls-files' [-z] [-t] [-v]
(--[cached|deleted|others|ignored|stage|unmerged|killed|modified])\*
(-[c|d|o|i|s|u|k|m])\*
[-x <pattern>|--exclude=<pattern>]
K:: to be killed
?:: other
+-v::
+ Similar to `-t`, but use lowercase letters for files
+ that are marked as 'always matching index'.
+
--full-name::
When run from a subdirectory, the command usually
outputs paths relative to the current directory. This
-------
The options available are:
+--cc::
+ Specify a starting "Cc:" value for each email.
+
--chain-reply-to, --no-chain-reply-to::
If this is set, each email will be sent as a reply to the previous
email sent. If disabled with "--no-chain-reply-to", all emails after
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
+--no-signed-off-by-cc::
+ Do not add emails foudn in Signed-off-by: lines to the cc list.
+
--quiet::
Make git-send-email less verbose. One line per email should be
all that is output.
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
+--suppress-from::
+ Do not add the From: address to the cc: list, if it shows up in a From:
+ line.
+
--to::
Specify the primary recipient of the emails generated.
Generally, this will be the upstream maintainer of the
the git repository. Use this option if you want to import into a
different branch.
+-r::
+ Prepend 'rX: ' to commit messages, where X is the imported
+ subversion revision.
+
-m::
Attempt to detect merges based on the commit message. This option
will enable default regexes that try to capture the name source
SYNOPSIS
--------
+[verse]
'git-update-index'
[--add] [--remove | --force-remove] [--replace]
[--refresh [-q] [--unmerged] [--ignore-missing]]
[--cacheinfo <mode> <object> <file>]\*
[--chmod=(+|-)x]
+ [--assume-unchanged | --no-assume-unchanged]
+ [--really-refresh]
[--info-only] [--index-info]
[-z] [--stdin]
[--verbose]
--chmod=(+|-)x::
Set the execute permissions on the updated files.
+--assume-unchanged, --no-assume-unchanged::
+ When these flags are specified, the object name recorded
+ for the paths are not updated. Instead, these options
+ sets and unsets the "assume unchanged" bit for the
+ paths. When the "assume unchanged" bit is on, git stops
+ checking the working tree files for possible
+ modifications, so you need to manually unset the bit to
+ tell git when you change the working tree file. This is
+ sometimes helpful when working with a big project on a
+ filesystem that has very slow lstat(2) system call
+ (e.g. cifs).
+
--info-only::
Do not create objects in the object database for all
<file> arguments that follow this flag; just insert
------------
+Using "assume unchanged" bit
+----------------------------
+
+Many operations in git depend on your filesystem to have an
+efficient `lstat(2)` implementation, so that `st_mtime`
+information for working tree files can be cheaply checked to see
+if the file contents have changed from the version recorded in
+the index file. Unfortunately, some filesystems have
+inefficient `lstat(2)`. If your filesystem is one of them, you
+can set "assume unchanged" bit to paths you have not changed to
+cause git not to do this check. Note that setting this bit on a
+path does not mean git will check the contents of the file to
+see if it has changed -- it makes git to omit any checking and
+assume it has *not* changed. When you make changes to working
+tree files, you have to explicitly tell git about it by dropping
+"assume unchanged" bit, either before or after you modify them.
+
+In order to set "assume unchanged" bit, use `--assume-unchanged`
+option. To unset, use `--no-assume-unchanged`.
+
+The command looks at `core.ignorestat` configuration variable. When
+this is true, paths updated with `git-update-index paths...` and
+paths updated with other git commands that update both index and
+working tree (e.g. `git-apply --index`, `git-checkout-index -u`,
+and `git-read-tree -u`) are automatically marked as "assume
+unchanged". Note that "assume unchanged" bit is *not* set if
+`git-update-index --refresh` finds the working tree file matches
+the index (use `git-update-index --really-refresh` if you want
+to mark them as "assume unchanged").
+
+
Examples
--------
To update and refresh only the files already checked out:
$ git-checkout-index -n -f -a && git-update-index --ignore-missing --refresh
----------------
+On an inefficient filesystem with `core.ignorestat` set:
+
+------------
+$ git update-index --really-refresh <1>
+$ git update-index --no-assume-unchanged foo.c <2>
+$ git diff --name-only <3>
+$ edit foo.c
+$ git diff --name-only <4>
+M foo.c
+$ git update-index foo.c <5>
+$ git diff --name-only <6>
+$ edit foo.c
+$ git diff --name-only <7>
+$ git update-index --no-assume-unchanged foo.c <8>
+$ git diff --name-only <9>
+M foo.c
+
+<1> forces lstat(2) to set "assume unchanged" bits for paths
+ that match index.
+<2> mark the path to be edited.
+<3> this does lstat(2) and finds index matches the path.
+<4> this does lstat(2) and finds index does not match the path.
+<5> registering the new version to index sets "assume unchanged" bit.
+<6> and it is assumed unchanged.
+<7> even after you edit it.
+<8> you can tell about the change after the fact.
+<9> now it checks with lstat(2) and finds it has been changed.
+------------
+
Configuration
-------------
executable bit. On such an unfortunate filesystem, you may
need to use `git-update-index --chmod=`.
+The command looks at `core.ignorestat` configuration variable. See
+'Using "assume unchanged" bit' section above.
+
See Also
--------
return -1;
}
- changed = ce_match_stat(active_cache[pos], &st);
+ changed = ce_match_stat(active_cache[pos], &st, 1);
if (changed)
return error("%s: does not match index",
old_name);
#define CE_NAMEMASK (0x0fff)
#define CE_STAGEMASK (0x3000)
#define CE_UPDATE (0x4000)
+#define CE_VALID (0x8000)
#define CE_STAGESHIFT 12
#define create_ce_flags(len, stage) htons((len) | ((stage) << CE_STAGESHIFT))
extern int remove_cache_entry_at(int pos);
extern int remove_file_from_cache(const char *path);
extern int ce_same_name(struct cache_entry *a, struct cache_entry *b);
-extern int ce_match_stat(struct cache_entry *ce, struct stat *st);
-extern int ce_modified(struct cache_entry *ce, struct stat *st);
+extern int ce_match_stat(struct cache_entry *ce, struct stat *st, int);
+extern int ce_modified(struct cache_entry *ce, struct stat *st, int);
extern int ce_path_match(const struct cache_entry *ce, const char **pathspec);
extern int index_fd(unsigned char *sha1, int fd, struct stat *st, int write_object, const char *type);
extern int index_pipe(unsigned char *sha1, int fd, const char *type, int write_object);
extern void rollback_index_file(struct cache_file *);
extern int trust_executable_bit;
+extern int assume_unchanged;
extern int only_use_symrefs;
extern int diff_rename_limit_default;
extern int shared_repository;
int all = 0;
prefix = setup_git_directory();
+ git_config(git_default_config);
prefix_length = prefix ? strlen(prefix) : 0;
if (read_cache() < 0) {
int i, show_hunks, shown_header = 0;
char ourtmp_buf[TMPPATHLEN];
char *ourtmp = ourtmp_buf;
+ int working_tree_file = !memcmp(elem->sha1, null_sha1, 20);
/* Read the result of merge first */
- if (memcmp(elem->sha1, null_sha1, 20)) {
+ if (!working_tree_file) {
result = grab_blob(elem->sha1, &size);
write_to_temp_file(ourtmp, result, size);
}
int len = st.st_size;
int cnt = 0;
+ elem->mode = DIFF_FILE_CANON_MODE(st.st_mode);
size = len;
result = xmalloc(len + 1);
while (cnt < len) {
else {
/* deleted file */
size = 0;
+ elem->mode = 0;
result = xmalloc(1);
result[0] = 0;
ourtmp = "/dev/null";
show_hunks = make_hunks(sline, cnt, num_parent, dense);
- if (show_hunks || mode_differs) {
+ if (show_hunks || mode_differs || working_tree_file) {
const char *abb;
if (header) {
putchar('\n');
printf("index ");
for (i = 0; i < num_parent; i++) {
- if (elem->parent[i].mode != elem->mode)
- mode_differs = 1;
abb = find_unique_abbrev(elem->parent[i].sha1,
DEFAULT_ABBREV);
printf("%s%s", i ? "," : "", abb);
return 0;
}
+ if (!strcmp(var, "core.ignorestat")) {
+ assume_unchanged = git_config_bool(var, value);
+ return 0;
+ }
+
if (!strcmp(var, "core.symrefsonly")) {
only_use_symrefs = git_config_bool(var, value);
return 0;
nce->sha1, 20);
combine.p.parent[stage-2].mode =
DIFF_FILE_CANON_MODE(mode);
+ combine.p.parent[stage-2].status =
+ DIFF_STATUS_MODIFIED;
}
/* diff against the proper unmerged stage */
show_file('-', ce);
continue;
}
- changed = ce_match_stat(ce, &st);
+ changed = ce_match_stat(ce, &st, 0);
if (!changed && !diff_options.find_copies_harder)
continue;
oldmode = ntohl(ce->ce_mode);
}
return -1;
}
- changed = ce_match_stat(ce, &st);
+ changed = ce_match_stat(ce, &st, 0);
if (changed) {
mode = create_ce_mode(st.st_mode);
if (!trust_executable_bit &&
ce = active_cache[pos];
if ((lstat(name, &st) < 0) ||
!S_ISREG(st.st_mode) || /* careful! */
- ce_match_stat(ce, &st) ||
+ ce_match_stat(ce, &st, 0) ||
memcmp(sha1, ce->sha1, 20))
return 0;
/* we return 1 only when we can stat, it is a regular file,
strcpy(path + len, ce->name);
if (!lstat(path, &st)) {
- unsigned changed = ce_match_stat(ce, &st);
+ unsigned changed = ce_match_stat(ce, &st, 1);
if (!changed)
return 0;
if (!state->force) {
char git_default_email[MAX_GITNAME];
char git_default_name[MAX_GITNAME];
int trust_executable_bit = 1;
+int assume_unchanged = 0;
int only_use_symrefs = 0;
int repository_format_version = 0;
char git_commit_encoding[MAX_ENCODING_LENGTH] = "utf-8";
exit 0
)
saved_err=$?
- test "$new" = "$old" ||
- git diff-index --name-status "$new"
+ if test "$saved_err" = 0
+ then
+ test "$new" = "$old" || git diff-index --name-status "$new"
+ fi
(exit $saved_err)
fi
verbose=
signoff=
force_author=
+only_include_assumed=
while case "$#" in 0) break;; esac
do
case "$1" in
0,)
;;
*,)
- echo >&2 "assuming --only paths..."
+ only_include_assumed="# Explicit paths specified without -i nor -o; assuming --only paths..."
also=
-
- # If we are going to launch an editor, the message won't be
- # shown without this...
- test -z "$log_given$status_only" && sleep 1
;;
esac
unset only
;;
,t)
save_index &&
+ git-ls-files --error-unmatch -- "$@" >/dev/null || exit
+
git-diff-files --name-only -z -- "$@" |
(
cd "$TOP"
refuse_partial "Different in index and the last commit:
$dirty_in_index"
fi
- commit_only=`git-ls-files -- "$@"`
+ commit_only=`git-ls-files --error-unmatch -- "$@"` || exit
# Build the temporary index and update the real index
# the same way.
PARENTS=""
fi
-run_status >>"$GIT_DIR"/COMMIT_EDITMSG
+{
+ test -z "$only_include_assumed" || echo "$only_include_assumed"
+ run_status
+} >>"$GIT_DIR"/COMMIT_EDITMSG
if [ "$?" != "0" -a ! -f "$GIT_DIR/MERGE_HEAD" ]
then
rm -f "$GIT_DIR/COMMIT_EDITMSG"
upstream=`git rev-parse --verify "${upstream_name}^0"` ||
die "invalid upsteram $upstream_name"
+# If a hook exists, give it a chance to interrupt
+if test -x "$GIT_DIR/hooks/pre-rebase"
+then
+ "$GIT_DIR/hooks/pre-rebase" ${1+"$@"} || {
+ echo >&2 "The pre-rebase hook refused to rebase."
+ exit 1
+ }
+fi
+
# If the branch to rebase is given, first switch to it.
case "$#" in
2)
my $compose_filename = ".msg.$$";
# Variables we fill in automatically, or via prompting:
-my (@to,@cc,$initial_reply_to,$initial_subject,@files,$from,$compose);
+my (@to,@cc,@initial_cc,$initial_reply_to,$initial_subject,@files,$from,$compose);
# Behavior modification variables
-my ($chain_reply_to, $smtp_server, $quiet) = (1, "localhost", 0);
+my ($chain_reply_to, $smtp_server, $quiet, $suppress_from, $no_signed_off_cc) = (1, "localhost", 0, 0, 0);
# Example reply to:
#$initial_reply_to = ''; #<20050203173208.GA23964@foobar.com>';
"in-reply-to=s" => \$initial_reply_to,
"subject=s" => \$initial_subject,
"to=s" => \@to,
+ "cc=s" => \@initial_cc,
"chain-reply-to!" => \$chain_reply_to,
"smtp-server=s" => \$smtp_server,
"compose" => \$compose,
"quiet" => \$quiet,
+ "suppress-from" => \$suppress_from,
+ "no-signed-off-cc" => \$no_signed_off_cc,
);
# Now, let's fill any that aren't set in with defaults:
--to Specify the primary "To:" line of the email.
+ --cc Specify an initial "Cc:" list for the entire series
+ of emails.
+
--compose Use \$EDITOR to edit an introductory message for the
patch series.
email sent, rather than to the first email sent.
Defaults to on.
+ --no-signed-off-cc Suppress the automatic addition of email addresses
+ that appear in a Signed-off-by: line, to the cc: list.
+ Note: Using this option is not recommended.
+
--smtp-server If set, specifies the outgoing SMTP server to use.
Defaults to localhost.
+ --suppress-from Supress sending emails to yourself if your address
+ appears in a From: line.
+
--quiet Make git-send-email less verbose. One line per email should be
all that is output.
-
Error: Please specify a file or a directory on the command line.
EOT
exit(1);
foreach my $t (@files) {
open(F,"<",$t) or die "can't open file $t";
- @cc = ();
+ @cc = @initial_cc;
my $found_mbox = 0;
my $header_done = 0;
$message = "";
$subject = $1;
} elsif (/^(Cc|From):\s+(.*)$/) {
+ next if ($2 eq $from && $suppress_from);
printf("(mbox) Adding cc: %s from line '%s'\n",
$2, $_) unless $quiet;
push @cc, $2;
}
} else {
$message .= $_;
- if (/^Signed-off-by: (.*)$/i) {
+ if (/^Signed-off-by: (.*)$/i && !$no_signed_off_cc) {
my $c = $1;
chomp $c;
push @cc, $c;
$SIG{'PIPE'}="IGNORE";
$ENV{'TZ'}="UTC";
-our($opt_h,$opt_o,$opt_v,$opt_u,$opt_C,$opt_i,$opt_m,$opt_M,$opt_t,$opt_T,$opt_b,$opt_s,$opt_l,$opt_d,$opt_D);
+our($opt_h,$opt_o,$opt_v,$opt_u,$opt_C,$opt_i,$opt_m,$opt_M,$opt_t,$opt_T,$opt_b,$opt_r,$opt_s,$opt_l,$opt_d,$opt_D);
sub usage() {
print STDERR <<END;
Usage: ${\basename $0} # fetch/update GIT from SVN
[-o branch-for-HEAD] [-h] [-v] [-l max_rev]
[-C GIT_repository] [-t tagname] [-T trunkname] [-b branchname]
- [-d|-D] [-i] [-u] [-s start_chg] [-m] [-M regex] [SVN_URL]
+ [-d|-D] [-i] [-u] [-r] [-s start_chg] [-m] [-M regex] [SVN_URL]
END
exit(1);
}
-getopts("b:C:dDhil:mM:o:s:t:T:uv") or usage();
+getopts("b:C:dDhil:mM:o:rs:t:T:uv") or usage();
usage if $opt_h;
my $tag_name = $opt_t || "tags";
$pr->reader();
$message =~ s/[\s\n]+\z//;
+ $message = "r$revision: $message" if $opt_r;
print $pw "$message\n"
or die "Error writing to git-commit-tree: $!\n";
static int show_modified = 0;
static int show_killed = 0;
static int show_other_directories = 0;
+static int show_valid_bit = 0;
static int line_terminator = '\n';
static int prefix_len = 0, prefix_offset = 0;
static const char *prefix = NULL;
static const char **pathspec = NULL;
+static int error_unmatch = 0;
+static char *ps_matched = NULL;
static const char *tag_cached = "";
static const char *tag_unmerged = "";
* Match a pathspec against a filename. The first "len" characters
* are the common prefix
*/
-static int match(const char **spec, const char *filename, int len)
+static int match(const char **spec, char *ps_matched,
+ const char *filename, int len)
{
const char *m;
int matchlen = strlen(m + len);
if (!matchlen)
- return 1;
+ goto matched;
if (!strncmp(m + len, filename + len, matchlen)) {
if (m[len + matchlen - 1] == '/')
- return 1;
+ goto matched;
switch (filename[len + matchlen]) {
case '/': case '\0':
- return 1;
+ goto matched;
}
}
if (!fnmatch(m + len, filename + len, 0))
- return 1;
+ goto matched;
+ if (ps_matched)
+ ps_matched++;
+ continue;
+ matched:
+ if (ps_matched)
+ *ps_matched = 1;
+ return 1;
}
return 0;
}
if (len >= ent->len)
die("git-ls-files: internal error - directory entry not superset of prefix");
- if (pathspec && !match(pathspec, ent->name, len))
+ if (pathspec && !match(pathspec, ps_matched, ent->name, len))
return;
fputs(tag, stdout);
if (len >= ce_namelen(ce))
die("git-ls-files: internal error - cache entry not superset of prefix");
- if (pathspec && !match(pathspec, ce->name, len))
+ if (pathspec && !match(pathspec, ps_matched, ce->name, len))
return;
+ if (tag && *tag && show_valid_bit &&
+ (ce->ce_flags & htons(CE_VALID))) {
+ static char alttag[4];
+ memcpy(alttag, tag, 3);
+ if (isalpha(tag[0]))
+ alttag[0] = tolower(tag[0]);
+ else if (tag[0] == '?')
+ alttag[0] = '!';
+ else {
+ alttag[0] = 'v';
+ alttag[1] = tag[0];
+ alttag[2] = ' ';
+ alttag[3] = 0;
+ }
+ tag = alttag;
+ }
+
if (!show_stage) {
fputs(tag, stdout);
write_name_quoted("", 0, ce->name + offset,
err = lstat(ce->name, &st);
if (show_deleted && err)
show_ce_entry(tag_removed, ce);
- if (show_modified && ce_modified(ce, &st))
+ if (show_modified && ce_modified(ce, &st, 0))
show_ce_entry(tag_modified, ce);
}
}
}
static const char ls_files_usage[] =
- "git-ls-files [-z] [-t] (--[cached|deleted|others|stage|unmerged|killed|modified])* "
+ "git-ls-files [-z] [-t] [-v] (--[cached|deleted|others|stage|unmerged|killed|modified])* "
"[ --ignored ] [--exclude=<pattern>] [--exclude-from=<file>] "
"[ --exclude-per-directory=<filename> ] [--full-name] [--] [<file>]*";
line_terminator = 0;
continue;
}
- if (!strcmp(arg, "-t")) {
+ if (!strcmp(arg, "-t") || !strcmp(arg, "-v")) {
tag_cached = "H ";
tag_unmerged = "M ";
tag_removed = "R ";
tag_modified = "C ";
tag_other = "? ";
tag_killed = "K ";
+ if (arg[1] == 'v')
+ show_valid_bit = 1;
continue;
}
if (!strcmp(arg, "-c") || !strcmp(arg, "--cached")) {
prefix_offset = 0;
continue;
}
+ if (!strcmp(arg, "--error-unmatch")) {
+ error_unmatch = 1;
+ continue;
+ }
if (*arg == '-')
usage(ls_files_usage);
break;
if (pathspec)
verify_pathspec();
+ /* Treat unmatching pathspec elements as errors */
+ if (pathspec && error_unmatch) {
+ int num;
+ for (num = 0; pathspec[num]; num++)
+ ;
+ ps_matched = xcalloc(1, num);
+ }
+
if (show_ignored && !exc_given) {
fprintf(stderr, "%s: --ignored needs some exclude pattern\n",
argv[0]);
if (prefix)
prune_cache();
show_files();
+
+ if (ps_matched) {
+ /* We need to make sure all pathspec matched otherwise
+ * it is an error.
+ */
+ int num, errors = 0;
+ for (num = 0; pathspec[num]; num++) {
+ if (ps_matched[num])
+ continue;
+ error("pathspec '%s' did not match any.",
+ pathspec[num] + prefix_len);
+ }
+ return errors ? 1 : 0;
+ }
+
return 0;
}
ce->ce_uid = htonl(st->st_uid);
ce->ce_gid = htonl(st->st_gid);
ce->ce_size = htonl(st->st_size);
+
+ if (assume_unchanged)
+ ce->ce_flags |= htons(CE_VALID);
}
static int ce_compare_data(struct cache_entry *ce, struct stat *st)
return changed;
}
-int ce_match_stat(struct cache_entry *ce, struct stat *st)
+int ce_match_stat(struct cache_entry *ce, struct stat *st, int ignore_valid)
{
- unsigned int changed = ce_match_stat_basic(ce, st);
+ unsigned int changed;
+
+ /*
+ * If it's marked as always valid in the index, it's
+ * valid whatever the checked-out copy says.
+ */
+ if (!ignore_valid && (ce->ce_flags & htons(CE_VALID)))
+ return 0;
+
+ changed = ce_match_stat_basic(ce, st);
/*
* Within 1 second of this sequence:
* effectively mean we can make at most one commit per second,
* which is not acceptable. Instead, we check cache entries
* whose mtime are the same as the index file timestamp more
- * careful than others.
+ * carefully than others.
*/
if (!changed &&
index_file_timestamp &&
return changed;
}
-int ce_modified(struct cache_entry *ce, struct stat *st)
+int ce_modified(struct cache_entry *ce, struct stat *st, int really)
{
int changed, changed_fs;
- changed = ce_match_stat(ce, st);
+ changed = ce_match_stat(ce, st, really);
if (!changed)
return 0;
/*
return -1;
if (len1 > len2)
return 1;
+
+ /* Compare stages */
+ flags1 &= CE_STAGEMASK;
+ flags2 &= CE_STAGEMASK;
+
if (flags1 < flags2)
return -1;
if (flags1 > flags2)
int ok_to_add = option & ADD_CACHE_OK_TO_ADD;
int ok_to_replace = option & ADD_CACHE_OK_TO_REPLACE;
int skip_df_check = option & ADD_CACHE_SKIP_DFCHECK;
+
pos = cache_name_pos(ce->name, ntohs(ce->ce_flags));
/* existing match? Just replace it. */
return;
if (!lstat(ce->name, &st)) {
- unsigned changed = ce_match_stat(ce, &st);
+ unsigned changed = ce_match_stat(ce, &st, 1);
if (!changed)
return;
errno = 0;
--- /dev/null
+#!/bin/sh
+#
+# Copyright (c) 2006 Junio C Hamano
+#
+
+publish=next
+basebranch="$1"
+if test "$#" = 2
+then
+ topic="refs/heads/$2"
+else
+ topic=`git symbolic-ref HEAD`
+fi
+
+case "$basebranch,$topic" in
+master,refs/heads/??/*)
+ ;;
+*)
+ exit 0 ;# we do not interrupt others.
+ ;;
+esac
+
+# Now we are dealing with a topic branch being rebased
+# on top of master. Is it OK to rebase it?
+
+# Is topic fully merged to master?
+not_in_master=`git-rev-list --pretty=oneline ^master "$topic"`
+if test -z "$not_in_master"
+then
+ echo >&2 "$topic is fully merged to master; better remove it."
+ exit 1 ;# we could allow it, but there is no point.
+fi
+
+# Is topic ever merged to next? If so you should not be rebasing it.
+only_next_1=`git-rev-list ^master "^$topic" ${publish} | sort`
+only_next_2=`git-rev-list ^master ${publish} | sort`
+if test "$only_next_1" = "$only_next_2"
+then
+ not_in_topic=`git-rev-list "^$topic" master`
+ if test -z "$not_in_topic"
+ then
+ echo >&2 "$topic is already up-to-date with master"
+ exit 1 ;# we could allow it, but there is no point.
+ else
+ exit 0
+ fi
+else
+ not_in_next=`git-rev-list --pretty=oneline ^${publish} "$topic"`
+ perl -e '
+ my $topic = $ARGV[0];
+ my $msg = "* $topic has commits already merged to public branch:\n";
+ my (%not_in_next) = map {
+ /^([0-9a-f]+) /;
+ ($1 => 1);
+ } split(/\n/, $ARGV[1]);
+ for my $elem (map {
+ /^([0-9a-f]+) (.*)$/;
+ [$1 => $2];
+ } split(/\n/, $ARGV[2])) {
+ if (!exists $not_in_next{$elem->[0]}) {
+ if ($msg) {
+ print STDERR $msg;
+ undef $msg;
+ }
+ print STDERR " $elem->[1]\n";
+ }
+ }
+ ' "$topic" "$not_in_next" "$not_in_master"
+ exit 1
+fi
+
+exit 0
+
+################################################################
+
+This sample hook safeguards topic branches that have been
+published from being rewound.
+
+The workflow assumed here is:
+
+ * Once a topic branch forks from "master", "master" is never
+ merged into it again (either directly or indirectly).
+
+ * Once a topic branch is fully cooked and merged into "master",
+ it is deleted. If you need to build on top of it to correct
+ earlier mistakes, a new topic branch is created by forking at
+ the tip of the "master". This is not strictly necessary, but
+ it makes it easier to keep your history simple.
+
+ * Whenever you need to test or publish your changes to topic
+ branches, merge them into "next" branch.
+
+The script, being an example, hardcodes the publish branch name
+to be "next", but it is trivial to make it configurable via
+$GIT_DIR/config mechanism.
+
+With this workflow, you would want to know:
+
+(1) ... if a topic branch has ever been merged to "next". Young
+ topic branches can have stupid mistakes you would rather
+ clean up before publishing, and things that have not been
+ merged into other branches can be easily rebased without
+ affecting other people. But once it is published, you would
+ not want to rewind it.
+
+(2) ... if a topic branch has been fully merged to "master".
+ Then you can delete it. More importantly, you should not
+ build on top of it -- other people may already want to
+ change things related to the topic as patches against your
+ "master", so if you need further changes, it is better to
+ fork the topic (perhaps with the same name) afresh from the
+ tip of "master".
+
+Let's look at this example:
+
+ o---o---o---o---o---o---o---o---o---o "next"
+ / / / /
+ / a---a---b A / /
+ / / / /
+ / / c---c---c---c B /
+ / / / \ /
+ / / / b---b C \ /
+ / / / / \ /
+ ---o---o---o---o---o---o---o---o---o---o---o "master"
+
+
+A, B and C are topic branches.
+
+ * A has one fix since it was merged up to "next".
+
+ * B has finished. It has been fully merged up to "master" and "next",
+ and is ready to be deleted.
+
+ * C has not merged to "next" at all.
+
+We would want to allow C to be rebased, refuse A, and encourage
+B to be deleted.
+
+To compute (1):
+
+ git-rev-list ^master ^topic next
+ git-rev-list ^master next
+
+ if these match, topic has not merged in next at all.
+
+To compute (2):
+
+ git-rev-list master..topic
+
+ if this is empty, it is fully merged to "master".
static int info_only;
static int force_remove;
static int verbose;
+static int mark_valid_only = 0;
+#define MARK_VALID 1
+#define UNMARK_VALID 2
+
/* Three functions to allow overloaded pointer return; see linux/err.h */
static inline void *ERR_PTR(long error)
va_end(vp);
}
+static int mark_valid(const char *path)
+{
+ int namelen = strlen(path);
+ int pos = cache_name_pos(path, namelen);
+ if (0 <= pos) {
+ switch (mark_valid_only) {
+ case MARK_VALID:
+ active_cache[pos]->ce_flags |= htons(CE_VALID);
+ break;
+ case UNMARK_VALID:
+ active_cache[pos]->ce_flags &= ~htons(CE_VALID);
+ break;
+ }
+ active_cache_changed = 1;
+ return 0;
+ }
+ return -1;
+}
+
static int add_file_to_cache(const char *path)
{
int size, namelen, option, status;
ce = xmalloc(size);
memset(ce, 0, size);
memcpy(ce->name, path, namelen);
+ ce->ce_flags = htons(namelen);
fill_stat_cache_info(ce, &st);
ce->ce_mode = create_ce_mode(st.st_mode);
if (0 <= pos)
ce->ce_mode = active_cache[pos]->ce_mode;
}
- ce->ce_flags = htons(namelen);
if (index_path(ce->sha1, path, &st, !info_only))
return -1;
* For example, you'd want to do this after doing a "git-read-tree",
* to link up the stat cache details with the proper files.
*/
-static struct cache_entry *refresh_entry(struct cache_entry *ce)
+static struct cache_entry *refresh_entry(struct cache_entry *ce, int really)
{
struct stat st;
struct cache_entry *updated;
if (lstat(ce->name, &st) < 0)
return ERR_PTR(-errno);
- changed = ce_match_stat(ce, &st);
- if (!changed)
- return NULL;
+ changed = ce_match_stat(ce, &st, really);
+ if (!changed) {
+ if (really && assume_unchanged &&
+ !(ce->ce_flags & htons(CE_VALID)))
+ ; /* mark this one VALID again */
+ else
+ return NULL;
+ }
- if (ce_modified(ce, &st))
+ if (ce_modified(ce, &st, really))
return ERR_PTR(-EINVAL);
size = ce_size(ce);
updated = xmalloc(size);
memcpy(updated, ce, size);
fill_stat_cache_info(updated, &st);
+
+ /* In this case, if really is not set, we should leave
+ * CE_VALID bit alone. Otherwise, paths marked with
+ * --no-assume-unchanged (i.e. things to be edited) will
+ * reacquire CE_VALID bit automatically, which is not
+ * really what we want.
+ */
+ if (!really && assume_unchanged && !(ce->ce_flags & htons(CE_VALID)))
+ updated->ce_flags &= ~htons(CE_VALID);
+
return updated;
}
-static int refresh_cache(void)
+static int refresh_cache(int really)
{
int i;
int has_errors = 0;
continue;
}
- new = refresh_entry(ce);
+ new = refresh_entry(ce, really);
if (!new)
continue;
if (IS_ERR(new)) {
if (not_new && PTR_ERR(new) == -ENOENT)
continue;
+ if (really && PTR_ERR(new) == -EINVAL) {
+ /* If we are doing --really-refresh that
+ * means the index is not valid anymore.
+ */
+ ce->ce_flags &= ~htons(CE_VALID);
+ active_cache_changed = 1;
+ }
if (quiet)
continue;
printf("%s: needs update\n", ce->name);
memcpy(ce->name, path, len);
ce->ce_flags = create_ce_flags(len, stage);
ce->ce_mode = create_ce_mode(mode);
+ if (assume_unchanged)
+ ce->ce_flags |= htons(CE_VALID);
option = allow_add ? ADD_CACHE_OK_TO_ADD : 0;
option |= allow_replace ? ADD_CACHE_OK_TO_REPLACE : 0;
if (add_cache_entry(ce, option))
fprintf(stderr, "Ignoring path %s\n", path);
return;
}
+ if (mark_valid_only) {
+ if (mark_valid(p))
+ die("Unable to mark file %s", path);
+ return;
+ }
+
if (force_remove) {
if (remove_file_from_cache(p))
die("git-update-index: unable to remove %s", path);
continue;
}
if (!strcmp(path, "--refresh")) {
- has_errors |= refresh_cache();
+ has_errors |= refresh_cache(0);
+ continue;
+ }
+ if (!strcmp(path, "--really-refresh")) {
+ has_errors |= refresh_cache(1);
continue;
}
if (!strcmp(path, "--cacheinfo")) {
die("git-update-index: %s cannot chmod %s", path, argv[i]);
continue;
}
+ if (!strcmp(path, "--assume-unchanged")) {
+ mark_valid_only = MARK_VALID;
+ continue;
+ }
+ if (!strcmp(path, "--no-assume-unchanged")) {
+ mark_valid_only = UNMARK_VALID;
+ continue;
+ }
if (!strcmp(path, "--info-only")) {
info_only = 1;
continue;
funny = 0;
for (i = 0; i < entries; i++) {
struct cache_entry *ce = active_cache[i];
- if (ntohs(ce->ce_flags) & ~CE_NAMEMASK) {
+ if (ce_stage(ce)) {
if (10 < ++funny) {
fprintf(stderr, "...\n");
break;
projects / git.git / commitdiff