values lead to a higher system load produced by collectd, while higher values
lead to more coarse statistics.
+=item B<Timeout> I<Iterations>
+
+Consider a value list "missing" when no update has been read or received for
+I<Iterations> iterations. By default, I<collectd> considers a value list
+missing when no update has been received for twice the update interval. Since
+this setting uses iterations, the maximum allowed time without update depends
+on the I<Interval> information contained in each value list. This is used in
+the I<Threshold> configuration to dispatch notifications about missing values,
+see L<"THRESHOLD CONFIGURATION"> below.
+
=item B<ReadThreads> I<Num>
Number of threads to start for reading plugins. The default value is B<5>, but
=back
+=head2 Plugin C<modbus>
+
+The B<modbus plugin> connects to a Modbus "slave" via Modbus/TCP and reads
+register values. It supports reading single registers (unsigned 16E<nbsp>bit
+values), large integer values (unsigned 32E<nbsp>bit values) and floating point
+values (two registers interpreted as IEEE floats in big endian notation).
+
+Synopsis:
+
+ <Data "voltage-input-1">
+ RegisterBase 0
+ RegisterType float
+ Type voltage
+ Instance "input-1"
+ </Data>
+
+ <Data "voltage-input-2">
+ RegisterBase 2
+ RegisterType float
+ Type voltage
+ Instance "input-2"
+ </Data>
+
+ <Host "modbus.example.com">
+ Address "192.168.0.42"
+ Port "502"
+ Interval 60
+
+ <Slave 1>
+ Instance "power-supply"
+ Collect "voltage-input-1"
+ Collect "voltage-input-2"
+ </Slave>
+ </Host>
+
+=over 4
+
+=item E<lt>B<Data> I<Name>E<gt> blocks
+
+Data blocks define a mapping between register numbers and the "types" used by
+I<collectd>.
+
+Within E<lt>DataE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<RegisterBase> I<Number>
+
+Configures the base register to read from the device. If the option
+B<RegisterType> has been set to B<Uint32> or B<Float>, this and the next
+register will be read (the register number is increased by one).
+
+=item B<RegisterType> B<Uint16>|B<Uint32>|B<Float>
+
+Specifies what kind of data is returned by the device. If the type is B<Uint32>
+or B<Float>, two 16E<nbsp>bit registers will be read and the data is combined
+into one value. Defaults to B<Uint16>.
+
+=item B<Type> I<Type>
+
+Specifies the "type" (data set) to use when dispatching the value to
+I<collectd>. Currently, only data sets with exactly one data source are
+supported.
+
+=item B<Instance> I<Instance>
+
+Sets the type instance to use when dispatching the value to I<collectd>. If
+unset, an empty string (no type instance) is used.
+
+=back
+
+=item E<lt>B<Host> I<Name>E<gt> blocks
+
+Host blocks are used to specify to which hosts to connect and what data to read
+from their "slaves". The string argument I<Name> is used as hostname when
+dispatching the values to I<collectd>.
+
+Within E<lt>HostE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<Address> I<Hostname>
+
+Specifies the node name (the actual network address) used to connect to the
+host. This may be an IP address or a hostname. Please note that the used
+I<libmodbus> library only supports IPv4 at the moment.
+
+=item B<Port> I<Service>
+
+Specifies the port used to connect to the host. The port can either be given as
+a number or as a service name. Please note that the I<Service> argument must be
+a string, even if ports are given in their numerical form. Defaults to "502".
+
+=item B<Interval> I<Interval>
+
+Sets the interval (in seconds) in which the values will be collected from this
+host. By default the global B<Interval> setting will be used.
+
+=item E<lt>B<Slave> I<ID>E<gt>
+
+Over each TCP connection, multiple Modbus devices may be reached. The slave ID
+is used to specify which device should be addressed. For each device you want
+to query, one B<Slave> block must be given.
+
+Within E<lt>SlaveE<nbsp>/E<gt> blocks, the following options are allowed:
+
+=over 4
+
+=item B<Instance> I<Instance>
+
+Specify the plugin instance to use when dispatching the values to I<collectd>.
+By default "slave_I<ID>" is used.
+
+=item B<Collect> I<DataName>
+
+Specifies which data to retrieve from the device. I<DataName> must be the same
+string as the I<Name> argument passed to a B<Data> block. You can specify this
+option multiple times to collect more than one value from a slave. At least one
+B<Collect> option is mandatory.
+
+=back
+
+=back
+
+=back
+
=head2 Plugin C<mysql>
The C<mysql plugin> requires B<mysqlclient> to be installed. It connects to
This feature is only available if the I<network> plugin was linked with
I<libgcrypt>.
+=item B<Interface> I<Interface name>
+
+Set the outgoing interface for IP packets. This applies at least
+to IPv6 packets and if possible to IPv4. If this option is not applicable,
+undefined or a non-existent interface name is specified, the default
+behavior is to let the kernel choose the appropriate interface. Be warned
+that the manual selection of an interface for unicast traffic is only
+necessary in rare cases.
+
=back
=item B<E<lt>Listen> I<Host> [I<Port>]B<E<gt>>
using L<stat(2)>. If the file has been changed, the contents is re-read. While
the file is being read, it is locked using L<fcntl(2)>.
+=item B<Interface> I<Interface name>
+
+Set the incoming interface for IP packets explicitly. This applies at least
+to IPv6 packets and if possible to IPv4. If this option is not applicable,
+undefined or a non-existent interface name is specified, the default
+behavior is, to let the kernel choose the appropriate interface. Thus incoming
+traffic gets only accepted, if it arrives on the given interface.
+
=back
=item B<TimeToLive> I<1-255>
when reading multiple status files. Enabling this option is recommended, but to
maintain backwards compatibility this option is disabled by default.
-=item B<Compression> B<true>|B<false>
+=item B<CollectCompression> B<true>|B<false>
Sets whether or not statistics about the compression used by OpenVPN should be
collected. This information is only available in I<single> mode. Enabled by
default.
+=item B<CollectIndividualUsers> B<true>|B<false>
+
+Sets whether or not traffic information is collected for each connected client
+individually. If set to false, currently no traffic data is collected at all
+because aggregating this data in a save manner is tricky. Defaults to B<true>.
+
+=item B<CollectUserCount> B<true>|B<false>
+
+When enabled, the number of currently connected clients or users is collected.
+This is especially interesting when B<CollectIndividualUsers> is disabled, but
+can be configured independently from that option. Defaults to B<false>.
+
=back
=head2 Plugin C<oracle>
This plugin embeds a Perl-interpreter into collectd and provides an interface
to collectd's plugin system. See L<collectd-perl(5)> for its documentation.
+=head2 Plugin C<pinba>
+
+The I<Pinba plugin> receives profiling information from I<Pinba>, an extension
+for the I<PHP> interpreter. At the end of executing a script, i.e. after a
+PHP-based webpage has been delivered, the extension will send a UDP packet
+containing timing information, peak memory usage and so on. The plugin will
+wait for such packets, parse them and account the provided information, which
+is then dispatched to the daemon once per interval.
+
+Synopsis:
+
+ <Plugin pinba>
+ Address "::0"
+ Port "30002"
+ # Overall statistics for the website.
+ <View "www-total">
+ Server "www.example.com"
+ </View>
+ # Statistics for www-a only
+ <View "www-a">
+ Host "www-a.example.com"
+ Server "www.example.com"
+ </View>
+ # Statistics for www-b only
+ <View "www-b">
+ Host "www-b.example.com"
+ Server "www.example.com"
+ </View>
+ </Plugin>
+
+The plugin provides the following configuration options:
+
+=over 4
+
+=item B<Address> I<Node>
+
+Configures the address used to open a listening socket. By default, plugin will
+bind to the I<any> address C<::0>.
+
+=item B<Port> I<Service>
+
+Configures the port (service) to bind to. By default the default Pinba port
+"30002" will be used. The option accepts service names in addition to port
+numbers and thus requires a I<string> argument.
+
+=item E<lt>B<View> I<Name>E<gt> block
+
+The packets sent by the Pinba extension include the hostname of the server, the
+server name (the name of the virtual host) and the script that was executed.
+Using B<View> blocks it is possible to separate the data into multiple groups
+to get more meaningful statistics. Each packet is added to all matching groups,
+so that a packet may be accounted for more than once.
+
+=over 4
+
+=item B<Host> I<Host>
+
+Matches the hostname of the system the webserver / script is running on. This
+will contain the result of the L<gethostname(2)> system call. If not
+configured, all hostnames will be accepted.
+
+=item B<Server> I<Server>
+
+Matches the name of the I<virtual host>, i.e. the contents of the
+C<$_SERVER["SERVER_NAME"]> variable when within PHP. If not configured, all
+server names will be accepted.
+
+=item B<Script> I<Script>
+
+Matches the name of the I<script name>, i.e. the contents of the
+C<$_SERVER["SCRIPT_NAME"]> variable when within PHP. If not configured, all
+script names will be accepted.
+
+=back
+
+=back
+
=head2 Plugin C<ping>
The I<Ping> plugin starts a new thread which sends ICMP "ping" packets to the
=item B<MaxMissed> I<Packets>
-Trigger a DNS resolv after the host has not replied to I<Packets> packets. This
+Trigger a DNS resolv
e after the host has not replied to I<Packets> packets. This
enables the use of dynamic DNS services (like dyndns.org) with the ping plugin.
Default: B<-1> (disabled)
</Database>
<Database bar>
+ Interval 300
Service "service_name"
Query backend # predefined
Query rt36_tickets
=item I<interval>
-The interval collectd is using (as specified by the B<Interval> option).
+The interval with which this database is queried (as specified by the database
+specific or global B<Interval> options).
=back
=over 4
+=item B<Interval> I<seconds>
+
+Specify the interval with which the database should be queried. The default is
+to use the global B<Interval> setting.
+
=item B<Host> I<hostname>
Specify the hostname or IP of the PostgreSQL server to connect to. If the
</Match>
<Match>
Regex "\\<R=local_user\\>"
+ ExcludeRegex "\\<R=local_user\\>.*mail_spool defer"
DSType "CounterInc"
Type "counter"
Instance "local_user"
Regex "SPAM \\(Score: (-?[0-9]+\\.[0-9]+)\\)"
+=item B<ExcludeRegex> I<regex>
+
+Sets an optional regular expression to use for excluding lines from the match.
+An example which excludes all connections from localhost from the match:
+
+ ExcludeRegex "127\\.0\\.0\\.1"
+
=item B<DSType> I<Type>
Sets how the values are cumulated. I<Type> is one of:
Also, all values that match a threshold are considered to be relevant or
"interesting". As a consequence collectd will issue a notification if they are
-not received for twice the last timeout of the values. If, for example, some
-hosts sends it's CPU statistics to the server every 60 seconds, a notification
-will be dispatched after about 120 seconds. It may take a little longer because
-the timeout is checked only once each B<Interval> on the server.
+not received for B<Timeout> iterations. The B<Timeout> configuration option is
+explained in section L<"GLOBAL OPTIONS">. If, for example, B<Timeout> is set to
+"2" (the default) and some hosts sends it's CPU statistics to the server every
+60 seconds, a notification will be dispatched after about 120 seconds. It may
+take a little longer because the timeout is checked only once each B<Interval>
+on the server.
When a value comes within range again or is received after it was missing, an
"OKAY-notification" is dispatched.
the identifier of a value. If multiple regular expressions are given, B<all>
regexen must match for a value to match.
+=item B<Invert> B<false>|B<true>
+
+When set to B<true>, the result of the match is inverted, i.e. all value lists
+where all regular expressions apply are not matched, all other value lists are
+matched. Defaults to B<false>.
+
=back
Example:
projects / collectd.git / blobdiff